aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* scripts/mkits.sh: add support for adding DT overlay blobs to imageDaniel Golle2021-03-171-2/+56
| | | | | | | | | | | | Allow adding multiple device tree overlay blobs to an image and generate configurations for each of them. This is useful on boards with modern U-Boot which allow e.g. user- configurable peripherals ("shields") in that way. Note that currently, each generated configuration adds exactly one overlay on top of the base image, ie. adding multiple overlays at the same time is not yet supported. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: fix RS-485 on Teltonika RUT-955Daniel Golle2021-03-173-14/+6
| | | | | | | | | DTR GPIO isn't actually needed and triggers boot warning. TX pin was off by one (GPIO 19 instead of GPIO 18). Reported-by: @tophirsch Fixes: d1130ad265 ("ath79: add support for Teltonika RUT955") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* malta: prune subtarget configsTony Ambardar2021-03-174-62/+0
| | | | | | | Drop autogenerated kernel config options. These aren't needed to build and can obscure options relevant to the subtarget. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* malta: update kernel 5.10 configsTony Ambardar2021-03-171-62/+9
| | | | | | | Update generic config to add missing options that prompt during builds. Run "make kernel_oldconfig" to refresh malta target config. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* malta: support kernel 5.10Tony Ambardar2021-03-172-0/+341
| | | | | | Add linux 5.10 as testing kernel and copy generic config from 5.4. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* realtek: enable SerDes NWAY and SGMII negotiationBjørn Mork2021-03-172-3/+42
| | | | | | | This allows copper SFPs to negotiate speeds lower than 1gig. Acked-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: enabled Marvell and Realtek PHYsBjørn Mork2021-03-171-0/+2
| | | | | | | | | | The rtl83xx-phy driver is necessary for proper configuration of the PHYs if U-Boot hasn't done that. 1000Base-T SFPs often contains a Marvell 88E1111 and will not work without this driver. Include it by default to support copper SFPs. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: enable HWMON for SFP sensorsBjørn Mork2021-03-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds SFP sensors as a hwmon device, allowing readout of temperatures, DOM and other sensor readings available from the SFP. Example from a ZyXEL GS1900-10HP with a DOM capable 1000Base-SX SFP: root@gs1900-10hp:~# grep . /sys/class/hwmon/hwmon0/* /sys/class/hwmon/hwmon0/curr1_crit:90 /sys/class/hwmon/hwmon0/curr1_crit_alarm:0 /sys/class/hwmon/hwmon0/curr1_input:4 /sys/class/hwmon/hwmon0/curr1_label:bias /sys/class/hwmon/hwmon0/curr1_lcrit:0 /sys/class/hwmon/hwmon0/curr1_lcrit_alarm:0 /sys/class/hwmon/hwmon0/curr1_max:85 /sys/class/hwmon/hwmon0/curr1_max_alarm:0 /sys/class/hwmon/hwmon0/curr1_min:0 /sys/class/hwmon/hwmon0/curr1_min_alarm:0 /sys/class/hwmon/hwmon0/in0_crit:3795 /sys/class/hwmon/hwmon0/in0_crit_alarm:0 /sys/class/hwmon/hwmon0/in0_input:3317 /sys/class/hwmon/hwmon0/in0_label:VCC /sys/class/hwmon/hwmon0/in0_lcrit:2805 /sys/class/hwmon/hwmon0/in0_lcrit_alarm:0 /sys/class/hwmon/hwmon0/in0_max:3465 /sys/class/hwmon/hwmon0/in0_max_alarm:0 /sys/class/hwmon/hwmon0/in0_min:3135 /sys/class/hwmon/hwmon0/in0_min_alarm:0 /sys/class/hwmon/hwmon0/name:sfp_p10 /sys/class/hwmon/hwmon0/power1_crit:708 /sys/class/hwmon/hwmon0/power1_crit_alarm:0 /sys/class/hwmon/hwmon0/power1_input:259 /sys/class/hwmon/hwmon0/power1_label:TX_power /sys/class/hwmon/hwmon0/power1_lcrit:89 /sys/class/hwmon/hwmon0/power1_lcrit_alarm:0 /sys/class/hwmon/hwmon0/power1_max:501 /sys/class/hwmon/hwmon0/power1_max_alarm:0 /sys/class/hwmon/hwmon0/power1_min:126 /sys/class/hwmon/hwmon0/power1_min_alarm:0 /sys/class/hwmon/hwmon0/power2_crit:1259 /sys/class/hwmon/hwmon0/power2_crit_alarm:0 /sys/class/hwmon/hwmon0/power2_input:404 /sys/class/hwmon/hwmon0/power2_label:RX_power /sys/class/hwmon/hwmon0/power2_lcrit:6 /sys/class/hwmon/hwmon0/power2_lcrit_alarm:0 /sys/class/hwmon/hwmon0/power2_max:794 /sys/class/hwmon/hwmon0/power2_max_alarm:0 /sys/class/hwmon/hwmon0/power2_min:10 /sys/class/hwmon/hwmon0/power2_min_alarm:0 /sys/class/hwmon/hwmon0/temp1_crit:100000 /sys/class/hwmon/hwmon0/temp1_crit_alarm:0 /sys/class/hwmon/hwmon0/temp1_input:22547 /sys/class/hwmon/hwmon0/temp1_label:temperature /sys/class/hwmon/hwmon0/temp1_lcrit:-50000 /sys/class/hwmon/hwmon0/temp1_lcrit_alarm:0 /sys/class/hwmon/hwmon0/temp1_max:85000 /sys/class/hwmon/hwmon0/temp1_max_alarm:0 /sys/class/hwmon/hwmon0/temp1_min:-40000 /sys/class/hwmon/hwmon0/temp1_min_alarm:0 /sys/class/hwmon/hwmon0/uevent:OF_NAME=sfp-p10 /sys/class/hwmon/hwmon0/uevent:OF_FULLNAME=/sfp-p10 /sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_0=sff,sfp /sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_N=1 Tested-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: re-enable sfp driver for ZyXEL GS1900-10HPBjørn Mork2021-03-171-18/+6
| | | | | | | | | | | | | There is no need to define a static link or a phy for the sfp ports. Using phy-mode and managed properties to describe the link to the sfp phy. We have to keep the now unconnected virtual "phys" because the switch driver uses their "phy-is-integrated" property to figure out which ports to enable as fibre ports. Acked-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: need to handle PHY_INTERFACE_MODE_NA for sfpsBjørn Mork2021-03-171-0/+1
| | | | | | | | | | From the validate docs in include/linux/phylink.h: When state->interface is PHY_INTERFACE_MODE_NA, phylink expects the MAC driver to return all supported link modes. Tested-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: fix link-state interruptBjørn Mork2021-03-171-4/+3
| | | | | | | This bug was the root cause for the failing sfp driver. Acked-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* mtd: fix imagetag compilationÁlvaro Fernández Rojas2021-03-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Commit b5b0796a1322 added an uint32_t to mtd.h without including stdint, which results in a compilation error for those files not including stdint.h. In file included from imagetag.c:36: mtd.h:15:8: error: unknown type name 'uint32_t' extern uint32_t opt_trxmagic; ^~~~~~~~ imagetag.c: In function 'trx_fixup': imagetag.c:180:10: warning: unused variable 'res' [-Wunused-variable] ssize_t res; ^~~ imagetag.c:177:14: warning: unused variable 'scan' [-Wunused-variable] void *ptr, *scan; ^~~~ imagetag.c: In function 'trx_check': imagetag.c:246:27: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] struct bcm_tag *tag = (const struct bcm_tag *) buf; ^ make[3]: *** [<builtin>: imagetag.o] Error 1 Fixes: b5b0796a1322 ("mtd: add option for TRX magic to fixtrx") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm4908: backport recent bcm_sf2 changesRafał Miłecki2021-03-177-8/+265
| | | | | | One 5.12 link fix and 5.13 crossbar support. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: backport recent bcm4908_enet changesRafał Miłecki2021-03-164-0/+431
| | | | | | This includes 5.12 fix and 5.13 improvements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* build,ib: add STRIP_ABI option for manifestPaul Spooren2021-03-161-1/+2
| | | | | | | | | | | | The ImageBuilder `make manifest` prints all installed packages. This function can be used to create a list of package and corresponding package versions before attempting image creation. When called with `--strip-abi` OPKG can automatically strip attached ABIVersions from package names. Make this function accessible for the ImageBuilder by adding a `STRIP_ABI` variable. Signed-off-by: Paul Spooren <mail@aparcar.org>
* mbedtls: update to 2.16.10Magnus Kroken2021-03-162-13/+13
| | | | | | | | | | | | | | | | | | | This release of Mbed TLS provides bug fixes and minor enhancements. This release includes fixes for security issues. Security fixes: * Fix a buffer overflow in mbedtls_mpi_sub_abs() * Fix an errorneous estimation for an internal buffer in mbedtls_pk_write_key_pem() * Fix a stack buffer overflow with mbedtls_net_poll() and mbedtls_net_recv_timeout() * Guard against strong local side channel attack against base64 tables by making access aceess to them use constant flow code Full release announcement: https://github.com/ARMmbed/mbedtls/releases/tag/v2.16.10 Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* bmips: backport bcm6368-mdio-mux supportÁlvaro Fernández Rojas2021-03-162-7/+109
| | | | | | This patch has been accepted for linux v5.13. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: enable CONFIG_B53_MDIO_DRIVERÁlvaro Fernández Rojas2021-03-161-1/+1
| | | | | | Some devices have external switches connected by MDIO. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: backport b53 spi device tree patchÁlvaro Fernández Rojas2021-03-161-0/+41
| | | | | | This patch has been accepted for linux v5.13. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: dgnd3700-v2: fix ethernetÁlvaro Fernández Rojas2021-03-163-0/+91
| | | | | | | This is a temporary workaround to get the ethernet working, since external switch is connected by MDIO and it needs additional work. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: backports: mt7530: fix TRGMII mode after resetIlya Lipnitskiy2021-03-164-6/+174
| | | | | | | | | | Backport upstream patch that fixes TRGMII mode now that mt7530 is actually resetting the switch on ramips devices. Patches apply to both Linux 5.4 and 5.10, since TRGMII is broken on both. Fixes: 69551a244292 ("ramips: manage low reset lines") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* x86/legacy: fix subtarget CPU for kernel 5.10Tony Ambardar2021-03-151-0/+5
| | | | | | | | | | | | The 5.10 target config defined a baseline i686 CPU aligned to the 32-bit generic subtarget. However, the legacy subtarget arch wasn't set to the older 586MMX, defaulting instead to the i686. Explicitly set the subtarget arch and refresh the subtarget config, as done already with the old geode subtarget. Fixes: 8391781389 ("x86: support kernel 5.10") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* bcm4908: backport first PHY 5.13 patchesRafał Miłecki2021-03-152-3/+43
| | | | | | | 1. Upstream accepted version of Kconfig change 2. Documentation binding fix Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: mt7622: drop duplicate DEVICE_PACKAGESDaniel Golle2021-03-151-1/+1
| | | | | | | | kmod-mt7615e kmod-mt7615-firmware and uboot-envtools are already part of the target's default package set. No need to add them again for buffalo_wsr-2533dhp2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Buffalo WSR-2533DHP2INAGAKI Hiroshi2021-03-159-0/+564
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Buffalo WSR-2533DHP2. The device uses the Broadcom TRX image format with a special magic. To be able to boot the images or load them they have to be wrapped with different headers depending how it is loaded. There are multiple ways to install OpenWrt on this device. Boot ramdisk from U-Boot ---------------------------- This will load the image and not write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux to SDRAM via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-initramfs-kernel.bin 4. The system boots the image Write to flash from U-Boot ----------------------------- This will load the image over tftp and directly write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux Kernel then write to Flash via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory-uboot.bin 4. The system writes this image into the flash and boots into it. Write to flash from Web UI ----------------------------- This will load the image over over the Web UI and write it into the flash 1. Open the Web UI 2. Go to "管理" -> "ファームウェア更新" 3. Select "ローカルファイル指定" and click "更新実行" 4. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory.bin 5. The system writes this image into the flash and boots into it. Specifications ------------------- * SoC: MT7622 (4x4 2.4 GHz Wifi) * Wifi: MT7615 (4x4 5 GHz Wifi) * Flash: Winbond W29N01HZ 128MB SLC NAND * RAM 256MB * Ethernet: Realtek RTL8367S (5 x 1GBit/s, SoC via 2.5GBit/s) Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: support non standard trx magic valuesHauke Mehrtens2021-03-154-0/+196
| | | | | | | | | | | Buffalo uses the TRX format with a different magic, add support for this. It is planned to send these patches upstream. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mtd: add option for TRX magic to fixtrxINAGAKI Hiroshi2021-03-153-6/+17
| | | | | | | | | | | | Buffalo uses the TRX header with a different magic and even changes this magic with different devices. This change allows to specify the header to use as a command line argument. This is needed for the Buffalo WSR-2533DHP2 based on mt7622. Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools: otrx: allow own magicHauke Mehrtens2021-03-151-2/+13
| | | | | | | | | This allows to specify an own magic instead of using the default magic value TRX_MAGIC. If no own magic is specified the default one will be used. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: fix mtk parallel nand driverHauke Mehrtens2021-03-151-0/+36
| | | | | | | | This fixes some bugs in the mtk parallel nand driver introduced in 5.10. This patch was send upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: replace threaded NAPI implementation in 5.10 with upstream backportFelix Fietkau2021-03-1515-395/+639
| | | | | | This uses a kthread per NAPI instance instead of the workqueue approach Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-03-151-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 6a3cf95733e2 mt76: fix tx skb error handling in mt76_dma_tx_queue_skb ab9045153343 mt76: mt7915: only modify tx buffer list after allocating tx token id 7e1eff676257 mt76: mt7915: fix unused 'mode' variable 8a2e22fcbf69 mt76: mt7921: fix suspend/resume sequence 27a54e8b687f mt76: mt7921: fix memory leak in mt7921_coredump_work c267322f0bdb mt76: mt7921: switch to new api for hardware beacon filter [v2 update] fd2c59d9ba46 mt76: mt7921: fixup rx bitrate statistics [v2 update] bfa8d5a6a9a1 mt76: adjust to upstream API for enabling threaded NAPI 1706fb6c48e8 mt76: mt7663s: fix rx buffer refcounting c5aca6692c41 mt76: mt7615: enable hw rx-amsdu de-aggregation 9002b0b30aed mt76: mt7615: add rx checksum offload support 8e3f5bfe74f6 mt76: mt7615: add support for rx decapsulation offload 8e3bba8bd3ef mt76: mt7615: fix memory leak in mt7615_coredump_work 760adce29100 mt76: mt7921: fix aggr length histogram 84229a51845a mt76: mt7915: fix aggr len debugfs node 10a95da23cb7 mt76: mt7921: remove unneeded semicolon 2856dc8fb57e mt76: mt7921: fix stats register definitions 1b245e57549d mt76: mt7615: fix TSF configuration 1a2e2965b62b mt76: mt7615: remove hdr->fw_ver check f60ec1b9473d mt76: mt7615: fix mib stats counter reporting to mac80211 8a5b036af48f mt76: mt7915: fix mib stats counter reporting to mac80211 ee6dbcc64f6d mt76: connac: fix kernel warning adding monitor interface e46dd240ce72 mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list ddf95ead3bb3 mt76: mt7921: get rid of mt7921_sta_rc_update routine fd2a51ea9dc8 mt76: mt7921: fix the base of PCIe interrupt 28f53d074bb0 mt76: mt7921: fix the base of the dynamic remap 8d737632b57f mt76: mt7921: check mcu returned values in mt7921_start 5ff25c915e62 mt76: mt7915: add missing capabilities for DBDC 58dd3f26c099 mt76: mt7615: fix CSA notification for DBDC 76f4959107ac mt76: mt7615: stop ext_phy queue when mac reset happens 7de0a0654054 mt76: mt7915: fix CSA notification for DBDC e9e418fc7eb0 mt76: mt7915: stop ext_phy queue when mac reset happens 477b78301879 mt76: mt7915: fix PHY mode for DBDC 37b4dc0f7595 mt76: mt76x0u: Add support for TP-Link T2UHP(UN) v1 29a04583aecb mt76: mt7915: fix rxrate reporting a4307e6ba054 mt76: mt7915: fix txrate reporting 256f324f8fcd mt76: mt7915: check mcu returned values in mt7915_ops 638b112188a5 mt76: mt7615: check mcu returned values in mt7615_ops 975cccfa96da mt76: mt7663: fix when beacon filter is being applied aafe972e95b2 mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation 0d5b1a702715 mt76: mt7663s: fix the possible device hang in high traffic 00628061b546 mt76: mt7615: add missing capabilities for DBDC 2303e1844afd mt76: mt7915: fix possible deadlock while mt7915_register_ext_phy() 6e2b9d258306 mt76: mt7921: reduce mcu timeouts for suspend, offload and hif_ctrl msg 3cf5afc02955 mt76: introduce mcu_reset function pointer in mt76_mcu_ops structure 9af9622df549 mt76: mt7921: introduce mt7921_run_firmware utility routine. e12c44a7e165 mt76: mt7921: introduce __mt7921_start utility routine 7b56d5bf6ea0 mt76: dma: introduce mt76_dma_queue_reset routine a80e50098b51 mt76: dma: export mt76_dma_rx_cleanup routine e0708e296e27 mt76: mt7921: add wifi reset support 87e09e8482cf mt76: mt7921: remove leftovers from dbdc configuration cc933b3669f7 mt76: mt7921: remove redundant check on type ca22cc221ae7 linux-firmware: add firmware for MT7921 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport upstream patches for driver disconnectFelix Fietkau2021-03-156-15/+593
| | | | | | Needed for an mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: prereq: drop support for Python 3.5Andre Heider2021-03-152-7/+5
| | | | | | | | | | | | | | | | | | | | The final Python 3.5 release was 3.5.10 in September 2020 [0]. This release series is now End-of-Life (EOL). The only LTS distribution that still only ships Python 3.5 is Ubuntu 16.04, which will be EOL in April 2021 [1]. The meson build system bumped their python requirement to 3.6 for the 0.57.0 release. This patch ensures that OpenWrt can update meson while still relying on the host python. [0] https://www.python.org/dev/peps/pep-0478/#id4 [1] https://ubuntu.com/about/release-cycle [2] https://mesonbuild.com/Release-notes-for-0-57-0.html#minimum-required-python-version-updated-to-36 Signed-off-by: Andre Heider <a.heider@gmail.com> [python3.6+ in README.md] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts,ipkg-build: use realpath for pkg_dirPaul Spooren2021-03-141-1/+1
| | | | | | | This allows manual execution of the ipkg-build script even with releative path. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts,ipkg-build: apply shellcheckPaul Spooren2021-03-141-41/+40
| | | | | | | | | | | This commit cleans the `ipkg-build` script via changes suggested by shellcheck. These are mostly word splitting issues. Remove the definition of GZIP, this adds three "lookups" of the `gzip` binary but the rest of the build system doesn't seem to use such improvements neither. Signed-off-by: Paul Spooren <mail@aparcar.org>
* gettext-full: disable nameless locale defineRosen Penev2021-03-142-5/+5
| | | | | | | It seems some packages like transmission and json-glib fail with it enabled. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* opkg: update to git HEADDaniel Golle2021-03-151-3/+3
| | | | | | 5936c4f libopkg: pkg_hash: prefer original packages to satisfy dependencies Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* opkg: update to git HEADDaniel Golle2021-03-141-3/+3
| | | | | | d3a63b3 libopkg: add option to strip ABI versions from listed names Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: also install production image to eMMCDaniel Golle2021-03-141-2/+5
| | | | | | | Make installation to eMMC more convenient on the BPi-R64 by also copying the production image (if valid) from SD Card to eMMC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: clean up image buildDaniel Golle2021-03-141-22/+13
| | | | | | | | | | | | | * clean up whitespace to make GPT partitioning more readable * don't select packages already part of the target default selection * don't select U-Boot variants (breaks ImageBuilder) * don't select AHCI on boards without SATA * don't select kmod-usb2 and kmod-ohci, USB 1.x and USB 2.0 devices work fine with the in-SoC XHCI host having just kmod-usb3 installed. * select kmod-btmtkuart for devices with Bluetooth support * sort DEVICE_PACKAGES Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: select matching U-Boot for boardDaniel Golle2021-03-141-9/+15
| | | | | | | Instead of building all U-Boot variants by default, build only those needed by the selected board(s). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firmware-utils/ptgen: remove unused variable assignmentDaniel Golle2021-03-141-1/+0
| | | | | | | | | | | | | | | | Discovered by coverty: CID 1473630: Code maintainability issues (UNUSED_VALUE) Assigning value from "type_to_guid_and_name(type, &name)" to "part_guid" here, but that stored value is overwritten before it can be used. Remove the now redundant assignment of part_guid which is also set conditionally later on. Fixes: 4a078bd135 ("firmware-utils/ptgen: fix partition guid and name") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm4908: use accepted 5.13 DTS patchesRafał Miłecki2021-03-1412-50/+238
| | | | | | | | | | | | Some patches were slightly cleaned up. One things worth mentioning is that adding: phy-mode = "rgmii" broke SF2 driver. It made it access random register breaking switch setup. That's why this commit also adds a quick sf2 fix. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport first 5.13 DTS changesRafał Miłecki2021-03-143-1/+476
| | | | | | | This adds NVMEM bindings that are needed for proper booting on Linksys devices. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* x86: support kernel 5.10Tony Ambardar2021-03-1411-1/+1890
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add linux 5.10 as testing kernel, copy generic/subtarget configs and target patches from 5.4. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> x86: update target patches for kernel 5.10 Refresh all patches while also dropping: 800-hwmon-w83627ehf-dont-claim-nct677x.patch which is now upstreamed as: 3207408ab4cb ("hwmon: (w83627ehf) remove nct6775 and nct6776 support") Signed-off-by: Tony Ambardar <itugrok@yahoo.com> x86: refresh 5.10 target config Refresh config using "make kernel_oldconfig". Signed-off-by: Tony Ambardar <itugrok@yahoo.com> x86: refresh and test all subtarget configs Refresh configs using "make kernel_oldconfig CONFIG_TARGET=subtarget". Build and run-tested using QEMU: x86/64, x86/legacy, x86/generic. Build-tested only: x86/geode. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [squashed commits] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: support new mdio_devres.ko module in 5.10Tony Ambardar2021-03-142-4/+22
| | | | | | | | | Add kmod-mdio-devres package and kernel config symbol, and update related kmod-r8169 and kmod-ixgbe package dependencies. Build tested module dependencies on x86/64 with CONFIG_ALL_KMODS=y. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: add missing config symbols for 5.10Tony Ambardar2021-03-141-0/+6
| | | | | | Update generic config to add missing options that prompt during builds. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* bmips: minor ethernet driver cleanups and fixesÁlvaro Fernández Rojas2021-03-141-62/+35
| | | | | | Add some minor ethernet driver cleanups and fixes to improve code quality. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: reorganize patchesÁlvaro Fernández Rojas2021-03-148-0/+0
| | | | | | Rename and reorganize backported patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* realtek: Add ZyXEL GS1900-8Hauke Mehrtens2021-03-143-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or SFP ports, but otherwise similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-8 v1.2 * SoC: Realtek RTL8380M 500 MHz MIPS 4KEc * Flash: Macronix MX25L12835F 16 MiB * RAM: Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM * Ethernet: 8x 10/100/1000 Mbit * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 8 ethernet port status LEDs (green, SoC controlled) * Buttons: 1 on-off glide switch at the back (not configurable) 1 reset button at the right side, behind the air-vent (not configurable) 1 reset button on front panel (configurable) * Power 12V 1A barrel connector * UART: 1 serial header (JP2) with populated standard pin connector on the left side of the PCB, towards the back. Pins are labelled: + VCC (3.3V) + TX (really RX) + RX (really TX) + GND the labelling is done from the usb2serial connector's point of view, so RX/ TX are mixed up. Serial connection parameters for both devices: 115200 8N1. Installation ------------ Instructions are identical to those for the GS1900-10HP and GS1900-8HP. * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-10HP is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot off the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-25 05:23:05 +0000