aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* netfilter.mk: remove now obsolete kmod nf_nat_redirectYousong Zhou2020-10-241-1/+0
| | | | | | Now that the minimal kernel version maintained here is 4.19 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter.mk: add version conditional around nf_nat_redirect modYousong Zhou2020-10-241-1/+1
| | | | | | | | | | | | | | | | | | | Kernel commit 1ac89d20150e ("netfilter: nat: merge nf_nat_redirect into nf_nat") made the redirect module part of the nat core and changed the CONFIG_NF_NAT_REDIRECT option to a boolean, without prompt, affecting kernel 4.18 onwards. CONFIG_NF_NAT_REDIRECT now can only be selected by CONFIG_NFT_REDIR or NETFILTER_XT_TARGET_REDIRECT Fixes: FS#2476 Ref: https://bugs.openwrt.org/index.php?do=details&task_id=2476 Fixes: FS#2990 (partial) Ref: https://bugs.openwrt.org/index.php?do=details&task_id=2990 Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [note that the option has no prompt and can only be selected by other kconfig options] Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter.mk: add version conditional around CONFIG_NF_NAT_PROTO_GREYousong Zhou2020-10-241-1/+1
| | | | | | | It was removed in upstream linux commit faec18db ("netfilter: nat: remove l4proto->manip_pkt"). This happened since linux 5.0 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter.mk: add version conditional for CONFIG_NF_CT_PROTO_GRETony Ambardar2020-10-241-1/+1
| | | | | | | | | | | | | | | | | Kernel commit 22fc4c4c9fd6 ("netfilter: conntrack: gre: switch module to be built-in") moved the CT GRE code into the core nf_conntrack.ko module and changed the CONFIG_NF_CT_PROTO_GRE option to boolean for kernel 5.1 and onwards. CONFIG_NF_CT_PROTO_GRE at the moment has no prompt and can only be selected by NF_CONNTRACK_PPTP Fixes: FS#2990 (partial) Ref: https://bugs.openwrt.org/index.php?do=details&task_id=2990 Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [note that the option now can not be enabled on its own] Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* generic: 5.4: make nf nat masquerade in unset state by defaultYousong Zhou2020-10-241-2/+1
| | | | | | | | | | | | | | Upstream linux 5.1 commit d1aca8ab ("netfilter: nat: merge ipv4 and ipv6 masquerade functionality") replaces the following 2 options - CONFIG_NF_NAT_MASQUERADE_IPV4 - CONFIG_NF_NAT_MASQUERADE_IPV6 with CONFIG_NF_NAT_MASQUERADE. The new option is one without prompt and will be selected by CONFIG_NETFILTER_XT_TARGET_MASQUERADE introduced still later in 5.2. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter.mk: add version conditional for nf_nat_ipv4,6Yousong Zhou2020-10-241-2/+2
| | | | | | | The upstream linux commit is 3bf195ae ("netfilter: nat: merge nf_nat_ipv4,6 into nat core"). It was included since linux 5.1 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter.mk: use CONFIG_NETFILTER_XT_TARGET_REDIRECTYousong Zhou2020-10-241-1/+1
| | | | | | | | CONFIG_IP_NF_TARGET_REDIRECT is a compat option since upstream commit 2cbc78a2 ("netfilter: combine ipt_REDIRECT and ip6t_REDIRECT"). That happened since linux 3.10 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter.mk: use CONFIG_NETFILTER_XT_TARGET_MASQUERADEYousong Zhou2020-10-241-1/+1
| | | | | | | | | | | CONFIG_IP_NF_TARGET_MASQUERADE and its counterpart CONFIG_IP6_NF_TARGET_MASQUERADE are "backwards-compat option for the user's convenience" Related commit d22c1755 ("netfilter: fix NAT packaging with kernels 5.2+") Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netifd: bump to version 2020-10-22Yousong Zhou2020-10-241-3/+3
| | | | | | | | | | | | | | | Changelog follows ced0d535 build: find and use libnl header dirs 5722218e proto: rework parse_addr to return struct device_addr 3d7bf604 device_addr: record address index as in the blob 24ce1eab interface: proto_ip: order by address index first This bump mainly affects order of interface addresses in ubus output. At the moment dnsmasq uses first address of an interface for setting dhcp-range option in its config Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* rpcd: adapt defaults for changed ubus.sock pathDaniel Golle2020-10-223-2/+10
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uhttpd: adapt defaults for changes ubus.sock pathDaniel Golle2020-10-223-2/+7
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: merge /etc/passwd et al at sysupgrade config restoreDaniel Golle2020-10-222-1/+17
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "target: select procd-{ujail,seccomp} if !SMALL_FLASH"Petr Štetiar2020-10-221-4/+0
| | | | | | | | | This reverts commit 6a56a6eb30799fcec9eecc3ee860dc4d8a5d952a as several users have reported unbootable systems. Ref: https://lists.openwrt.org/pipermail/openwrt-devel/2020-October/031838.html Suggested-by: Roman Kuzmitskii <damex.pp@icloud.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* target: select procd-{ujail,seccomp} if !SMALL_FLASHDaniel Golle2020-10-211-0/+4
| | | | | | | Add procd-ujail and procd-seccomp to DEFAULT_PACKAGES if not building for space-constraint (FEATURES:=small_flash) targets. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: jail: clean up capability handling and non-root ubusdDaniel Golle2020-10-211-3/+3
| | | | | | | | | | | | | | | Unify capability handling to only use OCI spec parsers even for ujail slim containers which previously supposedly used their own format. 80c9516 cgroups: restrict allowed keys in 'unified' section 5ade567 cgroups: memory controller fixes 3121467 early: run ubusd non-root as user ubus, group ubus 12a5b97 jail: adapt to new ubus socket path 788d144 instance: actually wire up capabilities filename ebc5a7f jail: nuke old capabilities code in favour of reusing OCI code 6c5233a jail: capabilities: apply in two phases Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ubus: prepare to run ubusd as non-root userDaniel Golle2020-10-211-3/+4
| | | | | | | Move /var/run/ubus.sock to /var/run/ubus/ubus.sock in preparation for having ubusd run as non-root user. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* target: include selinux-variants if CONFIG_SELINUX is setDaniel Golle2020-10-212-2/+8
| | | | | | | | Rather than unconditionally adding busybox and procd to the set of default packages, add busybox-selinux and procd-selinux in case CONFIG_SELINUX is set. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: save survey for every channel visitedMarkov Mikhail2020-10-211-0/+183
| | | | | | | | | | | | | | | rt2800 olny gives you survey for current channel. Survey-based ACS algorithms are failing to perform their job when working with rt2800. Make rt2800 save survey for every channel visited and be able to give away that information. There is a bug registred https://dev.archive.openwrt.org/ticket/19081 and this patch solves the issue. Signed-off-by: Markov Mikhail <markov.mikhail@itmh.ru>
* glibc: update to latest 2.31 commitHans Dedecker2020-10-201-2/+2
| | | | | | | | | | | 4bc9918c99 AArch64: Use __memcpy_simd on Neoverse N2/V1 4722d1fb9d [AArch64] Improve integer memcpy bea507a3f5 AArch64: Rename IS_ARES to IS_NEOVERSE_N1 d0a5b76902 AArch64: Improve backwards memmove performance 24a30c5959 AArch64: Add optimized Q-register memcpy 88db98fa6e AArch64: Align ENTRY to a cacheline Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: bump 5.4 to 5.4.72John Audia2020-10-203-9/+9
| | | | | | | | | | | | All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* ramips: add support for TP-Link RE200 v4Richard Fröhning2020-10-205-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link RE200 v4 is a wireless range extender with Ethernet and 2.4G and 5G WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN like the v2/v3. Specifications -------------- - MediaTek MT7628AN (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet - 8x LED (GPIO-controlled), 2x button - UART connection holes on PCB (57600 8n1) There are 2.4G and 5G LEDs in red and green which are controlled separately. MAC addresses ------------- The MAC address assignment matches stock firmware, i.e.: LAN : *:8E 2.4G: *:8D 5G : *:8C MAC address assignment has been done according to the RE200 v2. The label MAC address matches the OpenWrt ethernet address. Installation ------------ Web Interface ------------- It is possible to upgrade to OpenWrt via the web interface. Simply flash the -factory.bin from OEM. In contrast to a stock firmware, this will not overwrite U-Boot. Recovery -------- Unfortunately, this devices does not offer a recovery mode or a tftp installation method. If the web interface upgrade fails, you have to open your device and attach serial console. Instructions for serial console and recovery may be checked out in commit 6d6f36ae787c ("ramips: add support for TP-Link RE200 v2") or on the device's Wiki page. Signed-off-by: Richard Fröhning <misanthropos@gmx.de> [removed empty line, fix commit message formatting] Signed-off-by: David Bauer <mail@david-bauer.net>
* lantiq: remove support for kernel 4.19Adrian Schmutzler2020-10-19197-27155/+0
| | | | | | | | | | | | | The target uses 5.4 as default kernel since 06/2020. Kernel 4.19 support is not really maintained anymore, it does not seem to be needed and upcoming changes (mainly DSA) will break backward-compatibility anyway. Thus, make maintaining of old stuff and reviewing of new stuff easier by removing support for kernel 4.19. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: fix pci broken on bootm commandAnsuel Smith2020-10-191-0/+51
| | | | | | | | Pci is broken when bootm is used instead of the custom bootipq. This is caused by the lack of reset by the bootloader. Make the driver do the reset to fix this specific problem. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: remove support for kernel 4.19Adrian Schmutzler2020-10-1993-16473/+0
| | | | | | | | | | | | | The target uses 5.4 as default kernel since 04/2020. Kernel 4.19 support is not really maintained anymore, and there has been a lot of changes between 4.19 and 5.4 on this target. Despite, new devices are typically added for 5.4 only anyway. Thus, make maintaining of old stuff and reviewing of new stuff easier by removing support for kernel 4.19. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: remove support for kernel 4.19Adrian Schmutzler2020-10-1952-12169/+0
| | | | | | | | | | The target uses 5.4 as default kernel since 03/2020. Kernel 4.19 support is not really maintained anymore, it does not seem to be needed, and removing it will make upcoming driver updates easier. Thus, remove it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* rtl838x: various fixesJohn Crispin2020-10-195-0/+245
| | | | | | | | | * add d-link_dgs-1210-10p support * make sure mips16 is disabled * add a generic sub target * add proper cflags Signed-off-by: John Crispin <john@phrozen.org>
* sunxi: Adapt U-Boot config to board renameHauke Mehrtens2020-10-181-1/+1
| | | | | | | | The board was renamed without changing the BUILD_DEVICES in the U-Boot Makefile, this broken the build. Fixes: 0830ae3a2fdf ("sunxi: Correct manufacturer name to Sinovoip") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add support for FriendlyARM NanoPi R1Jayantajit Gogoi2020-10-186-0/+424
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz - DDR3 RAM: 512MB/1GB - Network: 10/100/1000M Ethernet x 1， 10/100M Ethernet x 1 - WiFi: 802.11b/g/n, with SMA antenna interface - USB Host: Type-A x2 - MicroSD Slot x 1 - MicroUSB: for OTG and power input - Debug Serial Port: 3Pin 2.54mm pitch pin-header - LED: nanopi:red:status nanopi:green:wan nanopi:green:lan - KEY: reset - Power Supply: DC 5V/2A Installation: - Write the image to SD Card with dd - Boot NanoPi from the SD Card Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
* ath79: add support for Qxwlan E1700AC v2张鹏2020-10-176-0/+214
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | E1700AC v2 based on Qualcomm/Atheros QCA9563 + QCA9880. Specification: - 750/400/250 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 2 x 10/1000M Mbps Ethernet (RJ45) - 1 x MiniPCI-e - 1 x SIM (3G/4G) - 1 x USB 2.0 Port - 5 x LED , 2 x Button(S8-Reset Buttun), 1 x power input - UART (J5) header on PCB (115200 8N1) Flash instruction: 1.Using tftp mode with UART connection and original LEDE image - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin" to "firmware.bin" and place it in tftp server directory. - Connect PC with one of LAN ports, power up the router and press key "Enter" to access U-Boot CLI. - Use the following commands to update the device to LEDE: run lfw - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. 2.Using httpd mode with Web UI connection and original LEDE image - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server. - Connect PC with one of LAN ports,press the reset button, power up the router and keep button pressed for around 6-7 seconds, until leds flashing. - Open your browser and enter 192.168.1.1,You will see the upgrade interface, select "openwrt-ar71xx-generic-xxx-squashfs- sysupgrade.bin" and click the upgrade button. - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. Signed-off-by: 张鹏 <sd20@qxwlan.com> [cut out of bigger patch, keep swconfig, whitespace fixes] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for Qxwlan E558 v2张鹏2020-10-175-0/+230
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327. Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9558) - 3x 10/100/1000 Mbps Ethernet (one port with PoE support) - 4x miniPCIe slot (USB 2.0 bus only) - 1x microSIM slot - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x 3-pos switch - 1x DC jack for main power input (9-48 V) - UART (JP5) and LEDs (J8) headers on PCB Flash instruction: 1.Using tftp mode with UART connection and original LEDE image - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin" to "firmware.bin" and place it in tftp server directory. - Connect PC with one of LAN ports, power up the router and press key "Enter" to access U-Boot CLI. - Use the following commands to update the device to LEDE: run lfw - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. 2.Using httpd mode with Web UI connection and original LEDE image - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server. - Connect PC with one of LAN ports,press the reset button, power up the router and keep button pressed for around 6-7 seconds, until leds flashing. - Open your browser and enter 192.168.1.1,You will see the upgrade interface, select "openwrt-ar71xx-generic-xxx-squashfs- sysupgrade.bin" and click the upgrade button. - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. Signed-off-by: 张鹏 <sd20@qxwlan.com> [cut out of bigger patch, keep swconfig, whitespace adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for Qxwlan E750G v8张鹏2020-10-174-0/+119
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qxwlan E750G v8 is based on Qualcomm QCA9344 + QCA9334. Specification: - 560/450/225 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4G GHz (AR9344) - 2x 10/100/1000 Mbps Ethernet (one port with PoE support) - 7x LED (6 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J23) and LEDs (J2) headers on PCB Flash instruction: 1.Using tftp mode with UART connection and original LEDE image - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin" to "firmware.bin" and place it in tftp server directory. - Connect PC with one of LAN ports, power up the router and press key "Enter" to access U-Boot CLI. - Use the following commands to update the device to LEDE: run lfw - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. 2.Using httpd mode with Web UI connection and original LEDE image - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server. - Connect PC with one of LAN ports,press the reset button, power up the router and keep button pressed for around 6-7 seconds, until leds flashing. - Open your browser and enter 192.168.1.1,You will see the upgrade interface, select "openwrt-ar71xx-generic-xxx-squashfs- sysupgrade.bin" and click the upgrade button. - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. Signed-off-by: 张鹏 <sd20@qxwlan.com> [cut out of bigger patch, keep swconfig] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: remove block2mtd checks from sysupgradeFelix Fietkau2020-10-172-8/+0
| | | | | | This hasn't been used in a long time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove obsolete non-upstream block2mtd patchesFelix Fietkau2020-10-174-326/+0
| | | | | | | Since block2mtd is not used for firmware images anymore, these patches are no longer needed Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix memory leak on filtered powersave framesFelix Fietkau2020-10-171-0/+55
| | | | | | | | | | After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged packets for stations in powersave mode. To fix this, move the code handling those packets from __ieee80211_tx_status into ieee80211_tx_status_ext Reported-by: Tobias Waldvogel <tobias.waldvogel@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "build: process variable exports from toplevel.mk only once"Adrian Schmutzler2020-10-161-2/+50
| | | | | | | | | | | This reverts commit ef7c34c1d1beac6bca4a683a3a161dd12a81f7e8. The commit seems to break all buildbots with messages like: /builder/shared-workdir/build/include/toplevel.mk:15: /builder/shared-workdir/build/include/toplevel-vars.mk: No such file or directory Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: prevent excessive re-evaluation of PKG_VERSIONFelix Fietkau2020-10-161-3/+5
| | | | | | | version_abbrev uses $(shell) and the ?= is causing make to run the command over and over again, causing a significant build slowdown Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: process variable exports from toplevel.mk only onceFelix Fietkau2020-10-161-50/+2
| | | | | | | These run a lot of expensive shell calls, so redundant calls should be avoided Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: rewrite flow offload codeFelix Fietkau2020-10-168-1260/+1487
| | | | | | | | | The code is now much cleaner and works better than the old code. Preparation for submitting it upstream (though with a different API) Also add back MT7621 support and fix flow table coherence issues on MT7622 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* config: clean up SELinux optionsDaniel Golle2020-10-162-3/+23
| | | | | | | | | In order to make it easier for users to build with SELinux, have a single option in 'Global build settings' to enable all necessary kernel features, userland packages and build-system hooks. Also add better descriptions and help messages while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* selinux-policy: update to git tag v0.3Daniel Golle2020-10-161-3/+3
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: update to git HEADDaniel Golle2020-10-161-3/+3
| | | | | | | | | | | 8e0f29a mount: remove support for legacy overlayfs before v2.3 0f8a443 mount: fix log format string and indentation 46a56d3 overlay: use precompiler macros for reoccuring path names f25ab8a mount: apply SELinux labels before overlayfs mount Total ipk size change (ipq40xx): +120b Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* policycoreutils: 'restorecon' is a 'setfiles' appletDaniel Golle2020-10-161-7/+2
| | | | | | | | Instead of duplicating the '/sbin/setfiles' binary, have '/sbin/restorecon' as yet another alias for '/sbin/policycoreutils-setfiles'. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: ubus: add handler for wps_status and guard WPS callsDaniel Golle2020-10-163-1/+57
| | | | | | | | | Expose WPS ubus API only if compiled with WPS support and add new handler for wps_status call. Also add '-v wps' option to check whether WPS support is present in hostapd. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: add support for Qxwlan E750A v4Peng Zhang2020-10-155-1/+235
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qxwlan E750A v4 is based on Qualcomm QCA9344. Specification: - 560/450/225 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 5G GHz (AR9344) - 2x 10/100 Mbps Ethernet (one port with PoE support) - 1x miniPCIe slot (USB 2.0 bus only) - 7x LED (6 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J23) and LEDs (J2) headers on PCB Flash instruction: 1.Using tftp mode with UART connection and original LEDE image - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin" to "firmware.bin" and place it in tftp server directory. - Connect PC with one of LAN ports, power up the router and press key "Enter" to access U-Boot CLI. - Use the following commands to update the device to LEDE: run lfw - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. 2.Using httpd mode with Web UI connection and original LEDE image - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server. - Connect PC with one of LAN ports,press the reset button, power up the router and keep button pressed for around 6-7 seconds, until leds flashing. - Open your browser and enter 192.168.1.1,You will see the upgrade interface, select "openwrt-ar71xx-generic-xxx-squashfs- sysupgrade.bin" and click the upgrade button. - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. Signed-off-by: Peng Zhang <sd20@qxwlan.com> [cut out of bigger patch, alter use of DEVICE_VARIANT, merge case in 01_leds, use lower case for v4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* rtl838x: remove model name from LED labelsAdrian Schmutzler2020-10-153-3/+2
| | | | | | | | | | | Like in the previous patches for various targets, this removes the "devicename" from LED labels in rtl838x, as it's useless and only creates complexity. Since the target is fresh and so far only system LEDs were added, this does not add a migration script. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* rtl838x: move dts-v1 to DTSIAdrian Schmutzler2020-10-153-3/+2
| | | | | | | The syntax of the shared SoC DTSI file determines the DTS version, so no need to repeat the "/dts-v1/;" identifier in every file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* sunxi: use wpad-basic-wolfssl for Sinovoip Banana Pi M2 UltraAdrian Schmutzler2020-10-151-1/+1
| | | | | | | | | The idea of commit a14f5bb4bd26 was to use wpad-basic-wolfssl consistently throughout the whole trunk, so use it here as well. Fixes: 50fdddae05f1 ("BPi-M2U kernel modules for onboard WiFi") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.71John Audia2020-10-1511-15/+15
| | | | | | | | | | | | | | | All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, lantiq/Easybox 904 xDSL Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [add lantiq test reports] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* rtl838x: add DLink DGS-1210-16 supportJohn Crispin2020-10-152-0/+346
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* rtl838x: Fix firmware handlingBirger Koblitz2020-10-152-3/+3
| | | | | | | Fix wrong magic number verification for FW files. Correct handling of external RTL8218B firmware PHY name in firmware. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 22:22:32 +0000