aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* firmware-utils: zyimage: drop POSIX SOURCE definesRafał Miłecki2021-04-131-2/+0
| | | | | | | | | | This fixes: src/zyimage.c:10:0: warning: "_POSIX_SOURCE" redefined src/zyimage.c:11:0: warning: "_POSIX_C_SOURCE" redefined This change has been tested on Linux with -Wextra and on Mac OS. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* tplink-safeloader: fix C7v5 factory flashing from vendor fw > v1.1.xPetr Štetiar2021-04-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently it's not possible to flash factory images on devices shipped with vendor firmware versions 1.1.0 Build 20201120 rel. 50406 (published 2020-12-22): (curFw_ver, newFw_ver) == (1.1, 1.0) [NM_Error](nm_checkSoftVer) 00848: Firmwave not supports, check failed. [NM_Error](nm_checkUpdateContent) 01084: software version dismatched [NM_Error](nm_buildUpgradeStruct) 01188: checkUpdateContent failed. They've even following note in release notes: Note: You will be unable to downgrade to the previous firmware version after updating this firmware. This version check in vendor firmware is implemented in /usr/bin/nvrammanager binary likely as following C code[1]: sscanf(buf, "%d.%d.%*s",&upd_fw_major, &upd_fw_minor); ... if (((int)upd_fw_major < (int)cur_fw_major) || ((ret = 1, cur_fw_major == upd_fw_major && (upd_fw_minor < (int)cur_fw_minor)))) { ret = 0; printf("[NM_Error](%s) %05d: Firmwave not supports, check failed.\r\n\r\n","nm_checkSoftVer" ,0x350); } ... return ret; So in order to fix this and make it future proof it should be enough to ship our factory firmware images with major version 7 (lucky number). Tested on latest firmware version 1.1.2 Build 20210125 rel.37999: Firmwave supports, check OK. (curFw_ver, newFw_ver) == (1.1, 7.0) check firmware ok! Flashing back to vendor firmware c7v5_us-up-ver1-1-2-P1[20210125-rel37999]_2021-01-25_10.33.55.bin works as well: U-Boot 1.1.4-gbec22107-dirty (Nov 18 2020 - 18:19:12) ... Firmware downloaded... filesize = 0xeeae77 fileaddr = 0x80060000. Firmware Recovery file length : 15642231 Firmware process id 2. handle_fw_cloud 146 Image verify OK! Firmware file Verify ok! product-info:product_name:Archer C7 product_ver:5.0.0 special_id:55530000 [Error]sysmgr_cfg_checkSupportList(): 1023 @ specialId 45550000 NOT Match. Firmware supports, check OK. Firmware Recovery check ok! 1. https://gist.github.com/ynezz/2e0583647d863386a66c3d231541b6d1 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add missing patch for kernel 5.10David Bauer2021-04-131-0/+9
| | | | | | | | | When adding the patch for the missing register, the patch file for the testing kernel 5.10 was not included. Fixes commit fbbad9a9a629 ("ath79: force SGMII SerDes mode to MAC operation") Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: force SGMII SerDes mode to MAC operationDavid Bauer2021-04-132-0/+14
| | | | | | | | | | | | | | | | | The mode on the SGMII SerDes on the QCA9563 is 1000 Base-X by default. This only allows for 1000 Mbit/s links, however when used with an SGMII PHY in 100 Mbit/s link mode, the link remains dead. This strictly has nothing to do with the SerDes calibration, however it is done at the same point in the QCA reference U-Boot which is the blueprint for everything happening here. As the current state is more or less a hack, this should be fine. This fixes the issues outlined above on a TP-Link EAP-225 Outdoor. Reported-by: Tom Herbers <freifunk@tomherbers.de> Tested-by: Tom Herbers <freifunk@tomherbers.de> Signed-off-by: David Bauer <mail@david-bauer.net>
* lantiq: kernel 5.10: disable ltq-deuMathias Kresin2021-04-121-1/+1
| | | | | | | | | | For linux 5.10, kmod-ltq-deu need to be migrated to the new crypto API/framework. Leave it in tree for now and enable it only for Kernel 5.4. Maybe someone picks up the work to migrate the package. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: add Linux 5.10 support as testing kernelMathias Kresin2021-04-1224-91/+338
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following changes are made to the Lantiq kernel patches: 0001-MIPS-lantiq-add-pcie-driver.patch The pci header isn't included by the of_pci header any longer 0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch Due to the merge of grx390 and ar10 clocks, extend support to grx390 0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch The do_carrier arguments was dropped from phy_link_change. The phylib has always sets the third parameter to true so the flag is always changed anyway. of_get_phy_mode() returns an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored now. So far an error wasn't considered. Print at least an error message if something unexpected happens. The stuck queue is now passed to xrx200_tx_timeout (the timeout handler) but not used so far. 0028-NET-lantiq-various-etop-fixes.patch ioremap has provided non-cached semantics by default since the Linux 2.6 days and was removed with kernel version 5.6. of_get_phy_mode() returns an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored now. So far an error wasn't considered. Print at least an error message if something unexpected happens. 0042-arch-mips-increase-io_space_limit.patch Move IO space extension to laniq specific file Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: copy target to kernel 5.10Mathias Kresin2021-04-1226-0/+15000
| | | | | | | | | Duplicate kernel 5.4 config and patches for kernel 5.10. Duplicate the devicetree source files as well, they need kernel 5.10 specific adjustments. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: mark PCI bridges as suchMathias Kresin2021-04-123-0/+6
| | | | | | | | Use the device_type property to mark PCI host bridges as such. With linux 5.10 it is mandatory, otherwise the PCI IO space is flages as PCI memory and the PCI init fails. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: ltq-adsl: add kernel 5.10 compatiblityMathias Kresin2021-04-121-0/+14
| | | | | | | The pgprot argument to __vmalloc is always PAGE_KERNEL now and was removed. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: ltq-vdsl: add kernel 5.10 compatiblityMathias Kresin2021-04-121-4/+16
| | | | | | | The pgprot argument to __vmalloc is always PAGE_KERNEL now and was removed. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-atm/ltq-ptm: add kernel 5.10 compatiblityMathias Kresin2021-04-123-0/+25
| | | | | | | | | | The callback handling of the tasklet API was redesigned and the macros using the old syntax renamed to _OLD. The stuck queue is now passed to ndo_tx_timeout callback but not used so far. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: ltq-tapi: add kernel 5.10 compatiblityMathias Kresin2021-04-121-0/+50
| | | | | | | | | | | | | Due to SCHED_FIFO being a broken scheduler model, all users of sched_setscheduler() are converted to sched_set_fifo_low() upstream and sched_setscheduler() is no longer exported. The callback handling of the tasklet API was redesigned and the macros using the old syntax renamed to _OLD. Signed-off-by: Mathias Kresin <dev@kresin.me> ltq tapi
* lantiq: ltq-vdsl-mei: add kernel 5.10 compatiblityMathias Kresin2021-04-122-7/+71
| | | | | | proc_create_data() expects a struct of type proc_ops. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: ltq-ifxos: add kernel 5.10 compatiblityMathias Kresin2021-04-121-1/+10
| | | | | | | ioremap has provided non-cached semantics by default since the Linux 2.6 days and was removed with kernel version 5.6. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: fix deferred mtdblock registrationDaniel Golle2021-04-121-12/+7
| | | | | | | | | | Check if gendisk is already up instead of trying to figure out parent mtd device (which didn't work well). Reported-by: DENG Qingfang <dqfext@gmail.com> Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com> Fixes: 2809d0000744 ("kernel: support FIT partition parser on mtdblock devices") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: add support for Banana Pi M2 BerryZoltan HERPAI2021-04-122-0/+17
| | | | | | | | | | | | | | | | | | CPU: Allwinner V40 quad-core Cortex A7 @ 1.2GHz Memory: 1GB DDR3 Storage: SDcard, native SATA Network: 10/100/1000M ethernet, Ampak AP6212 wifi + BT USB: 4x USB 2.0 Installation: Use the standard sunxi installation to an SD-card. While the board is very similar to the M2 Ultra board (the V40 is the automotive version of the R40), as both the u-boot and kernel supports them separately, and some pins are different, let's add a separate device spec. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ath79: mikrotik: enable 2nd USB on RouterBOARD 922UAGS-5HPacDKoen Vandeputte2021-04-121-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RB922 boards have 2 separate USB controllers: - 1 is connected to Slot Type A - 1 is connected to the mini PCIe port Enable the 2nd one too. Before: [ 5.339304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.355053] SCSI subsystem initialized [ 5.364184] ehci-fsl: Freescale EHCI Host controller driver [ 5.372377] ehci-platform: EHCI generic platform driver [ 5.378053] ehci-platform 1b000000.usb: EHCI Host Controller [ 5.383861] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1 [ 5.391932] ehci-platform 1b000000.usb: irq 14, io mem 0x1b000000 [ 5.410730] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00 [ 5.417739] hub 1-0:1.0: USB hub found [ 5.422280] hub 1-0:1.0: 1 port detected [ 5.434007] usbcore: registered new interface driver usb-storage After: [ 5.342988] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.358687] SCSI subsystem initialized [ 5.367813] ehci-fsl: Freescale EHCI Host controller driver [ 5.375998] ehci-platform: EHCI generic platform driver [ 5.381695] ehci-platform 1b000000.usb: EHCI Host Controller [ 5.387507] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1 [ 5.395571] ehci-platform 1b000000.usb: irq 14, io mem 0x1b000000 [ 5.416050] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00 [ 5.423089] hub 1-0:1.0: USB hub found [ 5.427578] hub 1-0:1.0: 1 port detected [ 5.432432] ehci-platform 1b400000.usb: EHCI Host Controller [ 5.438254] ehci-platform 1b400000.usb: new USB bus registered, assigned bus number 2 [ 5.446325] ehci-platform 1b400000.usb: irq 15, io mem 0x1b400000 [ 5.468049] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00 [ 5.475082] hub 2-0:1.0: USB hub found [ 5.479574] hub 2-0:1.0: 1 port detected [ 5.491305] usbcore: registered new interface driver usb-storage Fixes: 8f93c05a59 ("ath79: add support for MikroTik RouterBOARD 922UAGS-5HPacD") Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
* uboot-mediatek: minor fixes for bpi-r64 spi-nand default envDaniel Golle2021-04-111-5/+4
| | | | | | | * check image checksums before writing to flash * only bootmenu_0...9 are working, remove bootmenu_a entry Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: add support for H6 boards and OrangePiOnePlusZoltan HERPAI2021-04-118-2/+531
| | | | | | | | | | | | | | | | | | | | Specifications: SoC Allwinner H6 @ 1.8 Ghz DRAM 1Gb LPDDR3 Power DC 5V @ 3A Video HDMI (Type 2.0A - full) Audio HDMI, on-board microphone Network 10/100/1000Mbps Ethernet (Realtek RTL8211) Storage microSD USB 1 USB2.0 Host, 1 USB2.0 OTG Debug Serial UART Flashing instructions: Standard sunxi SD card installation procedure - copy image to SD card, insert into SD card slot on the device and boot. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* arm-trusted-firmware-sunxi: move to use the common tf-a build code and bump ↵Zoltan HERPAI2021-04-112-14/+20
| | | | | | | | | | | | | | | | | | | | | | | | to latest version Create a -a64 package for now. Moving to the latest ATF was tested on a SoPine A64 board. U-Boot SPL 2020.04 (Feb 19 2021 - 11:28:19 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.4(release):reboot-15854-g42b39a13d2 NOTICE: BL31: Built : 22:45:53, Feb 22 2021 NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) NOTICE: BL31: Found U-Boot DTB at 0x4090a28, model: SoPine with baseboard NOTICE: PSCI: System suspend is unavailable U-Boot 2020.04 (Feb 19 2021 - 11:28:19 +0000) Allwinner Technology CPU: Allwinner A64 (SUN50I) Model: SoPine with baseboard DRAM: 2 GiB Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: add ATF variable for specifying which flavour to useZoltan HERPAI2021-04-112-2/+11
| | | | | | | In preparation for H6 support (which requires a separate ATF blob), add an envvar to the A64 boards specifying which ATF blob to use. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* toolchain: gcc: Update to version 10.3.0Hauke Mehrtens2021-04-1120-6/+6
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* valgrind: Fix compile problem with MIPS soft floatHauke Mehrtens2021-04-111-0/+68
| | | | | | | | valgrind does not compile any more when using a GCC 10 for MIPS with soft float. Just remove the parts which are generating assembler which would not work. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-envtools: support environment in spi-nand on bpi-r64Daniel Golle2021-04-111-3/+11
| | | | | | | Default to U-Boot env in UBI if root device is not mmc block device. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mediatek: mt7622: add spi-nand support for bananapi bpi-r64Oskari Lemmela2021-04-114-12/+142
| | | | | | | | | | Some of bpi-r64 boards have serial NAND attached to SPI bus. Add SD card image support for installing openwrt to it. Default to nand upgrade if root device is not mmc block device. Separate preloader and uboot images for snand are generated. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* uboot-mediatek: add spi-nand build for bananapi bpi-r64Daniel Golle2021-04-113-21/+302
| | | | | | | | Some of bpi-r64 boards have serial NAND attached to SPI bus. Build U-Boot for booting from SPI-NAND. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mt76: add missing fileFelix Fietkau2021-04-111-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-04-111-3/+3
| | | | | | | | | | 028b7152b1a9 mt76: mt7921: remove 80+80 MHz support capabilities 7714dc914df6 mt76: report Rx timestamp ffd4cf15fa0e mt76: mt7915: add mmio.c fe8717dd573a mt76: mt7615: add missing SPDX tag in mmio.c 6b293c411d22 mt76: mt7615: always add rx header translation tlv when adding stations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add client mode connection monitor fixFelix Fietkau2021-04-111-0/+31
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: support rx timestamps for HE ratesFelix Fietkau2021-04-111-0/+134
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mxs: add support for 5.10 as testing kernelZoltan HERPAI2021-04-112-0/+251
| | | | | | | | | | | | | | The 100-ARM-dts-imx23-introduce-mmc0_sck_cfg.patch does not need to be copied over as it's already merged upstream. Other notable change is the USB_CHIPIDEA_OF change to USB_CHIPIDEA_IMX [1]. [1] https://www.spinics.net/lists/linux-usb/msg193347.html Compile/runtime-tested on Olinuxino Micro (imx23). Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* mediatek: fix writing bananapi bpi-r64 envOskari Lemmela2021-04-111-3/+4
| | | | | | | Use generic functions to get env partition. Fixes: 7043e4334f0 ("mediatek: mt7622: improve sysupgrade on MMC") Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mediatek: bpi-r64: use separate partition for emmc bootloaderOskari Lemmela2021-04-112-10/+11
| | | | | | | eMMC booloader is stored to separate partition. FIP size is increased to 2MB. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* kernel: Adapt renamed can-dev.koHauke Mehrtens2021-04-111-1/+1
| | | | | | | | The can-dev.ko kernel module was moved in kernel 5.4.110 and 5.10.28. Fixes: a1311df95587 ("kernel: bump 5.10 to 5.10.28") Fixes: b0a34e886da1 ("kernel: bump 5.4 to 5.4.110") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.28Rui Salvaterra2021-04-114-6/+6
| | | | | | | | | | | | Automatically refreshed: 601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch 640-02-net-resolve-forwarding-path-from-virtual-netdevice-a.patch 680-NET-skip-GRO-for-foreign-MAC-addresses.patch Run tested: ramips/mt7621 (Redmi AC2100) Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* sunxi: disable LPAE on cortexa8Zoltan HERPAI2021-04-101-0/+2
| | | | | | | LPAE should be disabled as the Cortex-A8 cores don't support it, and the kernel will crash on boot if it's enabled. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ath79: increase max SPI clock for DIR-859 A1Jan Forman2021-04-101-1/+1
| | | | | | | | Increase the spi-max frequency to 50 MHz, similar to the DIR-842. Signed-off-by: Jan Forman <forman.jan96@gmail.com> [improve commit title, fix commit message alignment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: improve pinctrl for Youku YK-L1Shiji Yang2021-04-102-16/+4
| | | | | | | 1. rename led pin "air" to a more common name "wlan" and use "phy0tpt" to trigger it. 2. led "wan" can be triggered by ethernet pinctrl by default so just drop it. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: bump 5.4 to 5.4.110John Audia2021-04-1011-29/+29
| | | | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Manually rebased due to movement of rx-offload.c in 5.4.110: layerscape/patches-5.4/802-can-0002-can-rx-offload-fix-long-lines.patch layerscape/patches-5.4/802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch layerscape/patches-5.4/802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch layerscape/patches-5.4/802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch layerscape/patches-5.4/802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch layerscape/patches-5.4/802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* mediatek: remove duplicate dts-v1 statement for UniFi 6 LRAdrian Schmutzler2021-04-102-2/+0
| | | | | | | | | /dts-v1/; must only be specified once. Fixes: e887049fbb74 ("mediatek: add alternative bootchain variant for UniFi 6 LR") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: consolidate testing kernelAdrian Schmutzler2021-04-105-8/+1
| | | | | | | All subtargets have the same testing kernel set, so move it to the target definition. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* umdns: add missing syscalls to seccomp filterDaniel Golle2021-04-101-27/+30
| | | | | | | | | | | | | | | Looks like 'openat', 'pipe2' and 'ppoll' are now needed, possibly due to changes on libraries used by umdns now using slightly different calls. Found using /etc/init.d/umdns trace now use umdns, ie. cover all ubus call etc., then /etc/init.d/umdns stop find list of syscalls traced in /tmp/umdns.*.json Fixes: FS#3355 ("UMDNS: does not start on master with seccomp") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: fix mtd squashfs root regression on targets with CONFIG_FIT_PARTITIONFelix Fietkau2021-04-103-5/+9
| | | | | | | | | Move 480-mtd-set-rootfs-to-be-root-dev.patch to hack-5.10 and fix assumption about the block device index. Fixes: 2809d0000744 ("kernel: support FIT partition parser on mtdblock devices") Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update flow offload patches to upstream versionFelix Fietkau2021-04-1051-525/+1845
| | | | | | Move patches to backport-5.10, since the series was accepted upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-envtools: oxnas: drop redundant space after case keywordsPiotr Dymacz2021-04-101-1/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: layerscape: drop redundant space after case keywordsPiotr Dymacz2021-04-101-1/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: ipq806x: drop redundant space after case keywordsPiotr Dymacz2021-04-101-3/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: ipq40xx: drop redundant space after case keywordsPiotr Dymacz2021-04-101-10/+10
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: imx6: drop redundant space after case keywordsPiotr Dymacz2021-04-101-28/+28
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: drop shebang from uci-defaults and lib filesPiotr Dymacz2021-04-1016-18/+0
| | | | | | These files are sourced and non-executable, a shebang is redundant. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-02 12:11:59 +0000