aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ipq806x: enable ath10k firmware for 988x, 99x0 and 9984 by defaultFelix Fietkau2016-07-041-2/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ustream-ssl: Fix recursive dependencyDaniel Dickinson2016-07-041-2/+2
| | | | | | | | Two variants incorrectly include themselves in conditional depends on ssl libraries, which results in a recursive dependency. Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
* ramips: fix up switch settings for Sitecom WL-351 v1 002John Crispin2016-07-034-2/+93
| | | | | | | | | Pinmux for rgmii needs to be set to rgmii, not gpio. Hide the ESW switch on boot (using new rgmii esw devicetree attribute). Also add a Sitecom-specific profile, since the image needs to include the rtl8366 kernel driver. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
* x86: enable kmod-igb on 64-bit by defaultFelix Fietkau2016-07-031-1/+1
| | | | | | It is used on APU2 devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix duplicate drivers for the PC speaker in one packageFelix Fietkau2016-07-031-3/+1
| | | | | | Only use the ALSA capable one, it supports regular beeps as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: stop relying on hexdump for image build signatureFelix Fietkau2016-07-031-1/+1
| | | | | | | Use perl to generate random number instead. See https://github.com/freifunk-gluon/gluon/issues/811 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move include statements for skb_get_hash_perturb() to prevent ↵Felix Fietkau2016-07-031-10/+4
| | | | | | issues with newer kernels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport skb_get_hash_perturb() for 4.1 and olderFelix Fietkau2016-07-031-0/+28
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: mac80211: set the parent of the ath9k gpio_chipMartin Blumenstingl2016-07-022-10/+15
| | | | | | | | | | | | | | | | This allows gpiolib to re-use ath9k's devicetree node as GPIO controller. Example: ath9k: ath9k@0 { #gpio-cells = <2>; gpio-controller; } Now the ath9k node can be used just like any other GPIO controller: gpios = <&ath9k 1 GPIO_ACTIVE_HIGH>; Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: mac80211: enable the gpio controller for all ath9k devicesMartin Blumenstingl2016-07-022-22/+12
| | | | | | | | | This enables ath9k's built-in GPIO controller for all chip versions (instead of an explicit whitelist). This also allows us to get rid of some duplicate code between hw.c and gpio.c because hw.c already determines the number of GPIOs. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: mac80211: fold the AR9280 GPIO patch into the ath9k GPIO patchMartin Blumenstingl2016-07-023-38/+13
| | | | | | | | This folds 550-ath9k_add_ar9280_gpio_chip.patch into 548-ath9k_enable_gpio_chip.patch because the former patch only extends code which is introduced in the latter. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* mac80211: refresh patchesMathias Kresin2016-07-023-51/+57
| | | | | Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ath10k: fix tx performance regression on older chipsetsFelix Fietkau2016-07-022-2/+75
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: enable STBC and LDPC for VHT ratesFelix Fietkau2016-07-021-0/+81
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-firmware: add symlink for QCA9984 board.binFelix Fietkau2016-07-021-0/+3
| | | | | | | Use first caldata for devices without OTP. The driver uses the caldata instead of the board.bin data anyway Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to wireless-testing 2016-06-20Felix Fietkau2016-07-0233-785/+594
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: fix redundant PROFILES overrides in image makefileFelix Fietkau2016-07-021-2/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: fix build breakage introduced in 9e41c3f54e3cFelix Fietkau2016-07-021-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: fix image makefile indentation for Device/ sectionsFelix Fietkau2016-07-021-40/+40
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix build of kmod-udptunnel4 and kmod-udptunnel6Hauke Mehrtens2016-07-023-0/+33
| | | | | | | | | | The kernel config option CONFIG_NET_UDP_TUNNEL is not visible and can not directly be activated. When kmod-udptunnel4 or kmod-udptunnel6 are build these packages could be empty when no other kernel module selects CONFIG_NET_UDP_TUNNEL. Reported-by: Baptiste Jonglez <baptiste@bitsofnetworks.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* jsonfilter: update to latest git HEADJohn Crispin2016-07-021-2/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* procd: Set /dev/kmsg to 600neheb2016-07-021-4/+0
| | | | | | | | | | | Small cleanup. I initially though /dev/kmsg was used for dmsg(and journald on desktops) but this seems not to be the case. dmsg is still accessible as non-root(gives output) which begs the question what does this do? Some googling reveals that permissions are set to 600 for some embedded systems while 644 for others. I can't find any justification for the latter. Might as well err on the side of caution. Signed-off by: Rosen Penev <rosenp@gmail.com>
* fstools: update to latest git HEADJohn Crispin2016-07-021-2/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* procd: update to latest git HEADJohn Crispin2016-07-021-2/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ubox: update to latest git HEADJohn Crispin2016-07-021-2/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ustream-ssl: update to latest git HEADJohn Crispin2016-07-021-2/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ubus: update to latest git HEADJohn Crispin2016-07-021-2/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: spi-rb4xx fix.Sergey Sergeev2016-07-021-1/+1
| | | | | | | | In new kernels we should use clk_prepare_enable instead of clk_enable since clk_enable does not make proper initialization that leads to rise WARN_ON messages and not working spi bus on the device. Signed-off-by: Sergey Sergeev <adron@yapic.net>
* nand-utile: add packageSergey Sergeev2016-07-021-0/+53
| | | | | | | This package is a custom build(like ubi-utils) of mtd-utils from infradead.org It is required to work with Mikrotik NAND based devices Signed-off-by: Sergey Sergeev <adron@yapic.net>
* ar71xx: prevent spurious ethernet resets from dma hang check false positivesFelix Fietkau2016-07-022-6/+12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libnl-tiny: Generic Netlink multicast groups supportHauke Mehrtens2016-07-027-1/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds this commit from normal libnl to libnl-tiny: https://github.com/tgraf/libnl/commit/2dbc1ca76c5b82c40749e609eb83877418abb006 commit 2dbc1ca76c5b82c40749e609eb83877418abb006 Author: dima <dima.ky@gmail.com> Date: Wed Oct 13 17:53:34 2010 +0300 Generic Netlink multicast groups support I have a patch against commit d378220c96c3c8b6f27dca33e7d8ba03318f9c2d extending libnl with a facility to receive generic netlink messages sent to multicast groups. Essentially it add one new function genl_ctrl_resolve_grp which prototype looks like this int genl_ctrl_resolve_grp(struct nl_sock *sk, const char *family_name, const char *grp_name) It resolves the family name and the group name to group id. Then the returned id can be used in nl_socket_add_membership to subscribe to multicast messages. Besides that it adds two more functions uint32_t nl_socket_get_peer_groups(struct nl_sock *sk) void nl_socket_set_peer_groups(struct nl_sock *sk, uint32_t groups) allowing to modify the socket peer groups field. So it's possible to multicast messages from the user space using the legacy interface. Looks like there is no way (or I was not able to find one?) to modify the netlink socket destination group from the user space, when the group id is greater then 32. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cosmetic style fix]
* kernel: Fix ipv6 mc snooping if bridge has no ipv6 addressdaniel2016-06-301-0/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a backport for current LEDE 4.4 Kernels. It is already upstream, for linux-next and stable. The initial commit message is below: The bridge is falsly dropping ipv6 mulitcast packets if there is: 1. No ipv6 address assigned on the brigde. 2. No external mld querier present. 3. The internal querier enabled. When the bridge fails to build mld queries, because it has no ipv6 address, it slilently returns, but keeps the local querier enabled. This specific case causes confusing packet loss. Ipv6 multicast snooping can only work if: a) An external querier is present OR b) The bridge has an ipv6 address an is capable of sending own queries Otherwise it has to forward/flood the ipv6 multicast traffic, because snooping cannot work. This patch fixes the issue by adding a flag to the bridge struct that indicates that there is currently no ipv6 address assinged to the bridge and returns a false state for the local querier in __br_multicast_querier_exists(). Special thanks to Linus Lüssing. Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
* spidev_test: copy the source code into the package folderJohn Crispin2016-06-302-10/+320
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: other.mk: add pps-ldisc supportStephen Walker2016-06-301-0/+17
| | | | | | The pps-ldisc kernel module supports Pulse-Per-Second connected with the CD (Carrier Detect) pin. Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
* ar71xx: seama: fix making factory imagesYousong Zhou2016-06-303-58/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | rootfs part needs to be aligned to erase block size which is passed as the 6th argument to Image/Build/Seama and is now 65536 since commit commit 5119ee9 "ar71xx: fix bogus hardcoded kernel image size for Seama images (fixes #20585)", but $(($(6) - 64)) still assumes that the argument is a limit on kernel partition size, i.e. 1310720, so the generated factory image is wrong in that the kernel will fail to find the rootfs (FlySpray link at [1]) This patch will workaround it with the following steps 1. Calculate the required space for seama header and META data in step 5 2. Pre-padding 64 bytes to lzma-compressed loader 3. Generate correctly padded image-$(2).tmp 4. Strip out the padding 5. Seal it with seama utility While at it convert seama to new build method [1] FS#35 - mynet-n750 factory images don't find root partition, https://bugs.lede-project.org/index.php?do=details&task_id=35 Reported-by: Steven Haigh <netwiz@crc.id.au> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: unify indentation with 2 whitespacesYousong Zhou2016-06-301-112/+112
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: remove duplicate IMAGES definitionYousong Zhou2016-06-301-1/+0
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: hiwifi-hc6361: move packages selection to generic.mkYousong Zhou2016-06-302-14/+9
| | | | | | | Remove kmod-crypto-deflate and kmod-ledtrig-gpio as the device works the same by default without them Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* procd: change /dev/{gpio,hvc*} perms to 0600John Crispin2016-06-301-7/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* procd: adjust /dev entries to desktop distro defaultsneheb2016-06-301-14/+4
| | | | | | | | | | | This changes the default permissions for /dev entries to be more similar to a desktop distro. Taken from the defaults of Arch Linux and Ubuntu. Also changed some that were nonsensical. For example, all 660 permissions on desktop distros were of the form root:x where x is something other than root. As such, 660 is useless for LEDE where the specific group is missing. audio seems to be the only group that isn't. Signed-off by: Rosen Penev <rosenp@gmail.com>
* ramips: disable the WP pin on the SDK mmc driverJohn Crispin2016-06-301-0/+21
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix pinmux typoJohn Crispin2016-06-301-0/+77
| | | | | Reported-by: Joy Kicer <joykicer@gmail.com> Signed-off-by: John Crispin <john@phrozen.org>
* base-files: seed /dev/urandomEtienne CHAMPETIER2016-06-303-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit: 1) seed /dev/urandom with the saved seeds as early as possible (see /lib/preinit/81_urandom_seed) 2) save a seed at /etc/urandom.seed if it doesn't exists 3) save a new seed each boot at "system.@system[0].urandom_seed" (see /etc/init.d/urandom_seed) We use getrandom() so we are sure /dev/urandom pool is initialized Seed size is 512 bytes (ie /proc/sys/kernel/random/poolsize / 8) it's the same size as in ubuntu 14.04 and all systemd systems Seeding /dev/urandom doesn't change entropy estimation, so we still have "random: ubus urandom read with 4 bits of entropy available" messages in the logs, but we can now ignore them if after "urandom-seed: Seeding with ..." message Saving a new seed on each boot is disabled by default to avoid too much writes without user consent v2: log preinit messages to /dev/kmsg v3: use non generic function name for logging, as /lib/preinit/ files are all sourced together in /etc/preinit v4: after a lot of discussion on the ML, use a uci config param v5: config param is now the path of the seed Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io>
* kernel: Add option to make using filesystem ACL support the defaultDaniel Dickinson2016-06-304-1/+95
| | | | | | | This adds a configuration options that allows to make filesystem ACL support the default in the kernel, except for old nfs. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
* package/kernel: Enable XATTR by defaultDaniel Dickinson2016-06-301-1/+3
| | | | | | | | OpenWrt enables XATTR support pretty much universally, therefore for filesystems that a loaded as modules also enable XATTR support so that there are no unexpected missing capabilities. Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
* e2fsprogs: fix build problem with very old libmagicHauke Mehrtens2016-06-301-0/+25
| | | | | | | | The libmagic shipped with RedHat 5 does not define MAGIC_NO_CHECK_ELF and MAGIC_NO_CHECK_COMPRESS. e2fsprogs should check for that, otherwise the build will fail. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* prism54-firmware: add also other p54 firmware to own packageHauke Mehrtens2016-06-302-47/+74
| | | | | | Extract the other p54 firmware files into the prism54-firmware package. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* firmware: extract prism54-firmware into own packageHauke Mehrtens2016-06-302-16/+40
| | | | | | | | | | | | | Instead of downloading the firmware for prism54 devices in the wireless.mk do it in an extra package Makefile. To ship the complete source code Intel ships our modified OpenWrt/LEDE + the content of the dl directory. We do not want to have any files in the dl/ directory which are not needed to build our images. The prism54 gets downloaded every time independently of building kmod-net-prism54 or not. When it is in a own package it only gets downloaded when the firmware package is selected. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* ramips: set correct LAN/WAN MAC addresses on DIR-860L B1Matthias Schiffer2016-06-301-0/+4
| | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by: Jo-Philipp Wich <jo@mein.io>
* ramips: add button support and make LEDs known to userspace for DIR-860L B1Matthias Schiffer2016-06-303-0/+16
| | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 15:58:55 +0000