aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: ArcherC50v1: fix wlan2g MAC addressThibaut VARENE2017-08-061-0/+2
| | | | | | | | | | By default the wlan eprom contains the generic ralink MAC which is not the vendor (TP-Link) one. Based on OFW bootlog, it appears that addresses are decremented from the ethernet MAC. This patch fixes the MAC address for wlan2g in line with OFW. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* lantiq: board.d: use auto xfer_mode as defaultMartin Schiller2017-08-061-1/+3
| | | | | | | If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that ATM should be used for ADSL and PTM for VDSL. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ltq-vdsl-app: add support for auto xfer_mode and auto line_modeMartin Schiller2017-08-061-11/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that ATM should be used for ADSL and PTM for VDSL. xfer_mode and line_mode can be set to fixed value independantly from each other. The syntax for the tc_layer argument of vdsl_cpe_control is as follow: -T<TcADSL>:<TcCfgUsADSL>:<TcCfgDsADSL>_<TcVDSL>:<TcCfgUsVDSL>:<TcCfgDsVDSL> where TcADSL and TcVDSL can be: 1=ATM, 2=PTM/EFM, 4=Auto TC-Layer and TcCfgUsADSL, TcCfgUsVDSL, TcCfgDsADSL, TcCfgDsVDSL can be: 1=64/65-octet encapsulation supported 2=64/65-octet encapsulation with pre-emption 3=64/65-octet encapsulation with short packets Default: In case of no '-T' option is given, ADSL will be configured in ATM and VDSL in PTM/EFM: -T1:0x1:0x1_2:0x1:0x1 The '-M' argument of dsl_cpe_control defines the initial DSL mode (NextMode) for ADSL/VDSL multimode handling. Possible Values: 0=API-default, 1=ADSL, 2=VDSL Default: In case of no '-M' option is given, '0' (API-default) will be selected. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ltq-vdsl-app: mask out ADSL bits when VDSL is requestedMartin Schiller2017-08-061-1/+4
| | | | | | | If the line_mode is fixed configured to vdsl, than only G.993 VDSL should be used. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ltq-vdsl-app: use notification based ATM/PTM driver loadMartin Schiller2017-08-065-20/+34
| | | | | | | This patch removes the fixed atm/ptm driver loading and switches to notification based driver loading. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* lantiq: ltq-atm/ltq-ptm: fix showtime handling on driver loadMartin Schiller2017-08-063-8/+10
| | | | | | | | This is needed to be able to load the ltq-atm/ltq-ptm driver from a notify script during synchronization, because the line can reach showtime state before the driver is fully loaded. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* lantiq: split up dsl_notify.sh into separate notification handlersMartin Schiller2017-08-063-68/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes it possible to simply add additional notification handlers by putting new scripts in the /etc/hotplug.d/dsl directory. the following Environment Variables are used: (values marked with an * are only available when bonding support is compiled in) DSL_NOTIFICATION_TYPE with one of these values: - DSL_STATUS - DSL_INTERFACE_STATUS - DSL_DATARATE_STATUS_US - DSL_DATARATE_STATUS_DS DSL_LINE_NUMBER=<0|1> * If DSL_NOTIFICATION_TYPE == DSL_STATUS, these variables are set: - DSL_XTU_STATUS=<ADSL|VDSL> - DSL_TC_LAYER_STATUS=<ATM|EFM> - DSL_EFM_TC_CONFIG_US=<NORMAL|PRE_EMPTION> - DSL_EFM_TC_CONFIG_DS=<NORMAL> If DSL_NOTIFICATION_TYPE == DSL_INTERFACE_STATUS, these variables are set: - DSL_INTERFACE_STATUS=<DOWN|READY|HANDSHAKE|TRAINING|UP> - DSL_BONDING_STATUS=<INACTIVE|ACTIVE> * If DSL_NOTIFICATION_TYPE == DSL_DATARATE_STATUS_US, these variables are set: - DSL_DATARATE_US_BC0=<Upstream data rate in bit/s for Channel 0> - DSL_DATARATE_US_BC1=<Upstream data rate in bit/s for Channel 1> * If DSL_NOTIFICATION_TYPE == DSL_DATARATE_STATUS_DS, these variables are set: - DSL_DATARATE_DS_BC0=<Downstream data rate in bit/s for Channel 0> - DSL_DATARATE_DS_BC1=<Downstream data rate in bit/s for Channel 1> * Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ltq-xdsl-app: drop esi callMathias Kresin2017-08-063-4/+1
| | | | | | | | | | | | | The esi call was added to workaround a race condition between applying a configured mac address to the wan interface and starting the protocol (handler) as it was observed in a DHCP over ATM bridge configuration. Martin Schiller, TDT GmbH was so kind to test with their local infrastructure if the race condition still exists. The provided package dumps captured behind the DSLAM shows that it doesn't. It was most likely fixed with adding carrier support to the lantiq ptm/atm driver. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: add missing patchJohn Crispin2017-08-051-0/+27
| | | | | | This patch was accidentally dropped. Signed-off-by: John Crispin <john@phrozen.org>
* kernel: split patches folder up into backport, pending and hack foldersJohn Crispin2017-08-05747-2653/+3697
| | | | | | | | | | | | | | | | | | | | * properly format/comment all patches * merge debloat patches * merge Kconfig patches * merge swconfig patches * merge hotplug patches * drop 200-fix_localversion.patch - upstream * drop 222-arm_zimage_none.patch - unused * drop 252-mv_cesa_depends.patch - no longer required * drop 410-mtd-move-forward-declaration-of-struct-mtd_info.patch - unused * drop 661-fq_codel_keep_dropped_stats.patch - outdated * drop 702-phy_add_aneg_done_function.patch - upstream * drop 840-rtc7301.patch - unused * drop 841-rtc_pt7c4338.patch - upstream * drop 921-use_preinit_as_init.patch - unused * drop spio-gpio-old and gpio-mmc - unused Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix cd-poll sd card remove randomlyQin Wie2017-08-041-0/+4
| | | | | | | Fix when add 'mediatek,cd-poll' to dts cause the sd card be removed randomly. Special for the device without card-detect pin. Signed-off-by: Qin Wie <me@vonger.cn>
* base-files: suppress uci not found output in login.shFlorian Eckert2017-08-041-1/+1
| | | | | | | Fix "uci: Entry not found" output if "ttylogin" is not set in "etc/config/system" Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* odhcpd: update to latest git HEAD (FS#402, FS#524)Hans Dedecker2017-08-031-3/+3
| | | | | | | 296b4a0 dhcpv6: assign all viable DHCPv6 addresses by default (FS#402, FS#524) f4d38e0 treewide: reflect managed mode is related to RA Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: move common parts into dtsiMathias Kresin2017-08-0315-690/+379
| | | | | | | Move the common parts of boards with multiple flash size variants into dtsi files. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: update device tree source filesL. D. Pinney2017-08-03212-1103/+1343
| | | | | | | | Use the GPIO dt-bindings macros and add compatible strings in the ramips device tree source files. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* tools/firmware-utils: document reserved fields in mkchkimgThibaut VARENE2017-08-031-4/+18
| | | | Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: Add support for Netgear EX3800Thibaut VARENE2017-08-033-5/+6
| | | | | | | | | | | | The Netgear EX3800 is essentially an EX3700 with a mains output socket. Both devices use the exact same firmware image (original firmware is named EX3700-EX3800-version.chk). This patch adds suport by renaming the EX3700 device to EX3700/EX3800 and updating the necessary glue. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: EX3700: rename factory.bin to factory.chkThibaut VARENE2017-08-031-2/+2
| | | | | | | The stock firmware upgrade interface requires the file to end with a .chk extension. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: cleanup EX2700 and WN3000RPv3 LEDsThibaut VARENE2017-08-032-5/+4
| | | | | | | | | | | | | | | This patch cleans up the WN3000RPv3 and EX2700 setup, bringing it in line with other similar devices: The power led is a bicolor one. The bootloader brings the red side on at powerup. Instead of blinking the red side in diag.sh and need to forcefully turn it off in 01_leds, this patch simplifies the setup by relying on the default off state of the gpio-led driver for the red side and blinking the green side as with other devices. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: cleanup AsiaRF AWM002 eval board supportMathias Kresin2017-08-037-162/+130
| | | | | | | | | | | Cleanup the dtsi files and remove one layer of dtsi. Set the size of the firmware partition to a value matching the flash size from the board (variant) name. Remove the usb led trigger. There is neither a default config for the usb led trigger nor a LED for usb activity indication. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: drop AsiaRF AWM003 eval boardMathias Kresin2017-08-035-77/+1
| | | | | | | Everything is identical to the AWM002 8m eval board. No need to duplicate it once more. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix Omnima MiniEMBWiFi imageMathias Kresin2017-08-031-0/+1
| | | | | | | Reference the Omnima MiniEMBWiFi device tree source file in the image build code. Otherwise the dts of the image processed before is used. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: build HuaWei HG255D imageMathias Kresin2017-08-031-0/+7
| | | | | | | The code to build an image was disabled some time ago for unknown reasons albeit the image looks fine. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: drop Edimax BR-6425 supportMathias Kresin2017-08-035-81/+0
| | | | | | Code to build an image for the Edimax BR-6425 never existed. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add missing partitionsMathias Kresin2017-08-032-9/+57
| | | | | | The partitions were lost during migration to device tree. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mediatek: move mt7623 support into a 32bit subtargetJohn Crispin2017-08-015-47/+58
| | | | | | this is in preparation for adding the new 64bit mt7622 support. Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix PCI init on MT7620 with Linux 4.9+Ilya Katsnelson2017-07-311-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So, this is kind of complicated. This has been upstream for a while, imported from OpenWRT/LEDE with some cleanups. LEDE ramips has stayed on linux-4.4 this whole time, with the old(er) version of the patch that had correct behavior[0], while upstream got changed[1]. When LEDE updated to kernel 4.9, the older version of the code from the patch got replaced with the upstream version containing the bug. The original behavior, however, seems to be correct here, as the official programming guide[2] indicates that bit 31 (PDRV_SW_SET) in register PPLL_CFG1 is reserved, but bit 23 (added as PPLL_LD) is the PPLL lock state (which also happens to line up with the error message). The original confusion probably comes from the double definition of PDRV_SW_SET[3, 4] in the upstream code, with one correct definition (31) and one incorrect one (23). I've also used the opportunity to clean up the error message a bit - it's still not really helpful to anyone who doesn't already know what the PPLL is, but at least it's slightly more readable now. This will probably need to be upstreamed as well, since with the way it's currently set up, it's unlikely PCI ever worked for anyone who's running an upstream kernel on that SoC. [0]: https://github.com/lede-project/source/blob/05d6e92594c507dcd1f4be6c1bcb2282fe1abe1f/target/linux/ramips/patches-4.4/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch#L259 [1]: https://github.com/torvalds/linux/blob/026d15f6b9878794fae1f794cae881ccd65052e5/arch/mips/pci/pci-mt7620.c#L246 [2]: http://www.anz.ru/files/mediatek/MT7620_ProgrammingGuide.pdf [3]: https://github.com/torvalds/linux/blob/026d15f6b9878794fae1f794cae881ccd65052e5/arch/mips/pci/pci-mt7620.c#L36 [4]: https://github.com/torvalds/linux/blob/026d15f6b9878794fae1f794cae881ccd65052e5/arch/mips/pci/pci-mt7620.c#L39 Signed-off-by: Ilya Katsnelson <me@0upti.me>
* procd: update to latest git HEADJohn Crispin2017-07-311-3/+3
| | | | | | f062b30 procd: Do not leak pipe file descriptors to children Signed-off-by: John Crispin <john@phrozen.org>
* fstools: update to latest git HEADJohn Crispin2017-07-311-3/+3
| | | | | | 8ab4fda fstools: add btrfs support Signed-off-by: John Crispin <john@phrozen.org>
* firmware-utils: mktplinkfw2: respect -e option when reading fw infoRafał Miłecki2017-07-311-3/+5
| | | | | | | | When -e option it specified a corresponding flag is set in the custom_board. By using custom_board as fallback -e option gets respected for unknown boards. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: mktplinkfw2: fix info for images with LE kernel LA/EPRafał Miłecki2017-07-311-1/+7
| | | | | | | With this change endianness is also respected when reading firmware info. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: mktplinkfw2: replace "endian_swap" field with "flags"Rafał Miłecki2017-07-311-8/+10
| | | | | | This will allow adding more similar tricks needed by other hardware. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: Archer C50v1: fix power ledThibaut VARENE2017-07-292-1/+1
| | | | | | | | | | 01_leds had a workaround for the power led to compensate for the inverted GPIO state. This patch was missing from my previous commit. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> [add the power led default-state which was omitted in the last commit by me] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: Archer C50v1: fix switch port numberingThibaut VARENE2017-07-291-1/+4
| | | | | | | | Luci shows switch ports in wrong order on that device. This patch fixes switch port numbering and matches them to the device silkscreen. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: Archer C50v1: fix LEDs active levelsThibaut VARENE2017-07-291-2/+2
| | | | | | | | | | All LEDs GPIOs are active low on this device. WAN and POWER states were inverted. Add default state for power. Tested on Archer C50v1. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: fix Mercury MAC1200R v2.0 board nameMathias Kresin2017-07-292-1/+2
| | | | | | | | | | | | With d2b6bf141662 ("ramips: fix image validation errors") the board name was changed to fix an image validation error. But this change wasn't applied to all other files using the board name, which broke sysupgrade. Revert this change and use the former board name in the metadata instead. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: mt7621: add compatible stringsL. D. Pinney2017-07-2925-0/+27
| | | | | | | Add compatible strings to all mt7621 based device tree source files to fix formal issues. Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
* brcm63xx: add NULL clock fix send upstreamMathias Kresin2017-07-295-5/+53
| | | | | | | | | | Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Fixes: FS#735 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add NULL clock fix send upstreamMathias Kresin2017-07-291-0/+43
| | | | | | | | | | Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Fixes: FS#735 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar7: add NULL clock fix send upstreamMathias Kresin2017-07-292-0/+90
| | | | | | | | Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Signed-off-by: Mathias Kresin <dev@kresin.me>
* openssl: update to version 1.0.2lLucian Cristian2017-07-284-10/+10
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* tcpdump: Update to 4.9.1Daniel Engberg2017-07-281-2/+2
| | | | | | | | | Update tcpdump to 4.9.1 Fixes: * CVE-2017-11108: Fix bounds checking for STP. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* kernel: update kernel 4.4 to version 4.4.79Hauke Mehrtens2017-07-2853-669/+96
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update kernel 4.9 to version 4.9.40Hauke Mehrtens2017-07-2812-35/+36
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* opkg: bump to version 2017-07-28Jo-Philipp Wich2017-07-281-3/+3
| | | | | | | | | | Commits since last 2017-07-11: 4bd8601 pkg_parse: fix segfault when parsing descriptions with leading newlines Fixes FS#933. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* brcm63xx: DTS: fix AV4202N flash layoutPaul Wassi2017-07-271-1/+1
| | | | | | | | Fix incorrect offset and size of linux partition. Fixes: 97b36aca09da ("brcm63xx: add pflash for remaining pflash equipped boards") Signed-off-by: Paul Wassi <p.wassi@gmx.at> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ramips: drop stray kernel 4.4 configsMathias Kresin2017-07-277-1494/+0
| | | | | | | The kernel 4.4 patches where already removed with the bump to 4.9. Drop the the subtarget configs as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for Loewe WMDR-143NOliver Fleischmann2017-07-275-1/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WMDR-143N is a small module originally used as a Wifi client in some Loewe smart TV sets. It is sold cheaply at german surplus shops. The module contains a RT3662 SOC. Specifications: - 500 MHz CPU Clock - 1x 10/100Mbps Ethernet (pin header) - 32 MB of RAM - 8 MB of FLASH - 2T3R 2.4/5 GHz (SOC internal) - 3 Antennas on PCB - UART pads on PCB (J3: 1 = +3.3V, 2 = RX, 3 = TX, 4 = GND), TX and RX are 3,3V only! The square hole is pin 1 - Power supply pads on PCB (J6: 1 and 2 = +5V, 3 and 4 = GND) The square hole is pin 1 The original firmware has two identical kernel/rootfs images and two "Factory" calibration data blocks in flash. The LEDE image leaves only the first "Factory" block in place and uses both "Kernel" blocks and the redundant "Factory" block together to gain enough space for the jffs2 partition. Flash instructions: You need UART and Ethernet connections to flash the board. Use the LEDE "sysupgrade.bin" image with tftp. Apply power to the board and in the first 5 seconds, hit 2 to select TFTP upload. The bootloader asks for board- and server IP addresses and filename. Alternate method: With the vendor firmware running, assign an IP address to the ethernet port, tftp the firmware image to /tmp and write to mtd4 ("KernelA"). Signed-off-by: Oliver Fleischmann <ogf@bnv-bamberg.de> [remove pinctrl node from dts, no pin is used as GPIO] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: pinctrl: return proper error if pinctrl0 is emptyMathias Kresin2017-07-271-1/+1
| | | | | | | | Children of the pinctrl0 node are optional. Return EINVAL (=missing) instead of 0. Fixes a hang if the pinctrl0 has no children. Signed-off-by: Mathias Kresin <dev@kresin.me> Acked-by: John Crispin <john@phrozen.org>
* scripts/package-metadata.pl: inhibit compile deps on missing build typesJo-Philipp Wich2017-07-271-6/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a package declares a PKG_BUILD_DEPENDENCY or HOST_BUILD_DEPENDENCY on a not existing build type, the metadata script will emit a reference to an unresolvable build target in tmp/.packagedeps, causing the make process to fail hard in a way not catchable by the IGNORE_ERRORS mechanism. In a situation where a package "test-a" declares a build dependency "PKG_BUILD_DEPENDS:=test-b/host" while the Makefile of "test-b" does not implement a HostBuild, make fails with an unrecoverable error in the form: make[1]: Entering directory '...' make[1]: *** No rule to make target 'package/test-b/host/compile', needed by 'package/test-a/compile'. Stop. make[1]: Leaving directory '...' .../toplevel.mk:200: recipe for target 'package/test-a/compile' failed make: *** [package/test-a/compile] Error 2 Extend the metadata generation script to catch such unresolved references and emit a visable warning upon detection. After this change, the script will emit a warning similar to: WARNING: Makefile "package/test-a/Makefile" has a build dependency on "test-b/host" but "package/test-b/Makefile" does not implement a "host" build type Fixes a global build cluster outage which occured after the "python-cffi" feed package removed its HostBuild which the "python-cryptography" package build-depended on. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 03:23:39 +0000