aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: firewrt: indicate boot status via LEDMathias Kresin2018-01-091-0/+1
| | | | | | | Add the Firefly FireWRT gree power LED to diag.sh to indicate the boot status via the power LED. Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: gpio switch: set output value with directionMathias Kresin2018-01-092-4/+3
| | | | | | | | | | | | Use the "low" and "high" values to configure the GPIO as an output with that initial value. It ensures that the gpio doesn't have a unwanted value during the time the direction is set to ouput and the actual value is applied. We don't need to take care of the GPIO polarity for now, since our exported GPIOs are always active low. Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: gpio_switch: start before boot state done is setMathias Kresin2018-01-091-1/+1
| | | | | | | Start gpio_switch before the boot state is set to up/initialised/done. This way the exported GPIOs are available at the time rc.local is started. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: remove obsolete '< KERNEL_VERSION(4, 4, 0)' checkGabor Juhos2018-01-091-5/+0
| | | | | | | | | Because the oldest supported kernel version on the ar71xx target is 4.4, the condition that the kernel version is smaller than 4.4.0 is always false. Remove the obsolete check from mach-rb4xx.c to clean up the code a bit. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: remove obsolete '< KERNEL_VERSION(4, 2, 0)' checkGabor Juhos2018-01-091-7/+0
| | | | | | | | | Because the oldest supported kernel version on the ar71xx target is 4.4, the condition that the kernel version is smaller than 4.2.0 is always false. Remove the obsolete check from ag71xx_main.c to clean up the code a bit. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: remove obsolete '< KERNEL_VERSION(3, 15, 0)' checksGabor Juhos2018-01-092-17/+0
| | | | | | | | | Because the oldest supported kernel version on the ar71xx target is 4.4, the condition that the kernel version is smaller than 3.15.0 is always false. Remove the obsolete checks from the target specific source files to clean up the code a bit. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* armvirt: bump to v4.14John Crispin2018-01-092-1/+253
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* malta: bump tp v4.14John Crispin2018-01-092-1/+310
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* malta: fix image prefix namesJohn Crispin2018-01-091-4/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx/mikrotik: disable TP-Link TL-WR810N v2 board supportGabor Juhos2018-01-091-0/+1
| | | | | | It does not belongs to the MikroTik boards. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx/mikrotik: disable unused MTD partitioning and split driversGabor Juhos2018-01-091-0/+6
| | | | | | Reduces the compressed kernel size by ~2.5KB. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx/mikrotik: disable unused ethernet switch and phy driversGabor Juhos2018-01-091-0/+4
| | | | | | | | | | | | | | | | | | | | Disable the drivers for the following ethernet switches: Realtek RTL8306 Realtek RTL8366/8367 Marvell 88E6060 (DSA) Marvell 88E6063 (DSA) Also disable the phy driver for Marvell PHYs. None of the supported RouterBOARDs are using any device which needs these drivers. Disable the DSA framework too, because it is not required by the remaining switch drivers. This reduces the compressed kernel size by ~20KB. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: fix Kconfig dependency of the 88E6063 switch DSA driverGabor Juhos2018-01-092-2/+4
| | | | | | | | | | | | The Marvell 88E6063 ethernet switch driver depends on the DSA framework. Add a 'depends on NET_DSA' statement to its Kconfig entry to state that explicitly. Fixes the following Kconfig warning: warning: (NET_DSA_MV88E6060 && NET_DSA_MV88E6063) selects NET_DSA_TAG_TRAILER which has unmet direct dependencies (NET && NET_DSA) Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: sort kernel configurationsGabor Juhos2018-01-094-6/+6
| | | | | | | The symbols in some kernel configurations of the target are in wrong order. Sort them with kconfig.pl. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* octeon: add support for kernel 4.14Stijn Tintel2018-01-085-0/+465
| | | | | | Tested on EdgeRouter Lite. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: bump 4.14 to 4.14.12Stijn Tintel2018-01-081-2/+2
| | | | | | | | | No patch refresh required. Compile-tested on: octeon, x86/64. Runtime-tested on: octeon, x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* lantiq: activate noise margin delta for VDSL tooHauke Mehrtens2018-01-071-2/+2
| | | | | | | | | | | Previously this was only activated for ADSL, this patch activates the same setting also for VDSL, this feature is also support for VDSL in the same way it works for ADSL. I tested it with DSL FW 5.7.9.5.1.7 against a Broadcom 177.140 DSLCO (Deutsche Telekom) and saw different data rates and Max. Attainable Data Rates depending on the ds_snr_offset settings I choose. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-envtool: remove superfluous + sign from PKG_BUILD_DEPENDSMatthias Schiffer2018-01-071-1/+1
| | | | | | A + sign does not have meaning in build depends. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* libubox: fix package bumpJo-Philipp Wich2018-01-071-4/+4
| | | | | | | | The previous commit was incorrectly rebased and referred to a not yet existing PROJECT_GIT variable. Fixes: d86a269c1f libubox: update to latest git HEAD Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* libubox: update to latest git HEADJo-Philipp Wich2018-01-071-1/+1
| | | | | | 1c08e80 jshn: properly support JSON "null" type Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "fstools: update to latest git HEAD"Jo-Philipp Wich2018-01-071-2/+2
| | | | | | | | This reverts commit df326e9b2e71a2c639371ef8acec0ac98bc36122. The referenced commit does not exist in the upstream repository. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fstools: update to latest git HEADJohn Crispin2018-01-071-2/+2
| | | | | | | 2a9a6ea libfstools: optimize building directory string for glob de6b026 libfstools: support file paths longer than 255 chars Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: fix compiler warnings in mdio-bitbang.c for 4.4Gabor Juhos2018-01-072-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building Linux 4.4 for ar71xx throws the following warnings in drivers/net/phy/mdio-bitbang.c: CC drivers/net/phy/mdio-bitbang.o In file included from include/linux/irqflags.h:14:0, from drivers/net/phy/mdio-bitbang.c:20: drivers/net/phy/mdio-bitbang.c: In function 'mdiobb_read': include/linux/typecheck.h:11:18: warning: comparison of distinct pointer types lacks a cast (void)(&__dummy == &__dummy2); \ ^ include/linux/irqflags.h:63:3: note: in expansion of macro 'typecheck' typecheck(unsigned long, flags); \ ^ include/linux/irqflags.h:124:3: note: in expansion of macro 'raw_local_irq_save' raw_local_irq_save(flags); \ ^ drivers/net/phy/mdio-bitbang.c:162:2: note: in expansion of macro 'local_irq_save' local_irq_save(flags); ^ include/linux/typecheck.h:11:18: warning: comparison of distinct pointer types lacks a cast (void)(&__dummy == &__dummy2); \ ^ include/linux/irqflags.h:68:3: note: in expansion of macro 'typecheck' typecheck(unsigned long, flags); \ ^ include/linux/irqflags.h:126:39: note: in expansion of macro 'raw_local_irq_restore' #define local_irq_restore(flags) do { raw_local_irq_restore(flags); } while (0) ^ drivers/net/phy/mdio-bitbang.c:175:2: note: in expansion of macro 'local_irq_restore' local_irq_restore(flags); ^ drivers/net/phy/mdio-bitbang.c:159:11: warning: unused variable 'i' [-Wunused-variable] int ret, i; ^ In file included from include/linux/irqflags.h:14:0, from drivers/net/phy/mdio-bitbang.c:20: drivers/net/phy/mdio-bitbang.c: In function 'mdiobb_write': include/linux/typecheck.h:11:18: warning: comparison of distinct pointer types lacks a cast (void)(&__dummy == &__dummy2); \ ^ include/linux/irqflags.h:63:3: note: in expansion of macro 'typecheck' typecheck(unsigned long, flags); \ ^ include/linux/irqflags.h:124:3: note: in expansion of macro 'raw_local_irq_save' raw_local_irq_save(flags); \ ^ drivers/net/phy/mdio-bitbang.c:185:2: note: in expansion of macro 'local_irq_save' local_irq_save(flags); ^ include/linux/typecheck.h:11:18: warning: comparison of distinct pointer types lacks a cast (void)(&__dummy == &__dummy2); \ ^ include/linux/irqflags.h:68:3: note: in expansion of macro 'typecheck' typecheck(unsigned long, flags); \ ^ include/linux/irqflags.h:126:39: note: in expansion of macro 'raw_local_irq_restore' #define local_irq_restore(flags) do { raw_local_irq_restore(flags); } while (0) ^ drivers/net/phy/mdio-bitbang.c:200:2: note: in expansion of macro 'local_irq_restore' local_irq_restore(flags); ^ These are caused by the 900-mdio_bitbang_ignore_ta_value and 901-phy-mdio-bitbang-prevent-rescheduling-during-command patches. The first patch removes some code but it does not remove the variable which is used by the removed code only. The second patch adds local_irq_{save,restore} calls. The type of the argument of these calls must be 'unsigned long', but the patch defines the variable as 'long'. Fix both patches to silence the warnings. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* hostapd: bump PKG_RELEASE after 802.11w changesJo-Philipp Wich2018-01-071-1/+1
| | | | | Fixes: 8a57531855 "hostapd: set group_mgmt_cipher when ieee80211w is enabled" Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: fix packaging of kmod-gpio-nxp-74hc164Jo-Philipp Wich2018-01-071-3/+3
| | | | | | | | | | | | | | | | The NXP 74HC164 GPIO expander driver uses a different config symbol ("CONFIG_GPIO_74X164") and module name since since at least Kernel version 2.6.37. Update the kmod package definition accordingly by adjusting kconfig and module file names. This unrelated, but correct change has been separated from the WNR2000v5 support commits. Ref: https://github.com/lede-project/source/pull/1256 Suggested-by: Raphael Catolino <raphael.catolino@gmail.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* zlib: only enable NEON optimizations on eligible targetsJo-Philipp Wich2018-01-071-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | Instead of inferring the availability of NEON support from the target optimization flags, use a preprocessor test to decide whether to enable ARMv8 NEON optimizations. Fixes the following build error spotted by the mediatek/32 buildbot: [ 26%] Building C object CMakeFiles/zlib.dir/contrib/arm/inflate.o In file included from .../zlib-1.2.11/contrib/arm/chunkcopy.h:10:0, from .../zlib-1.2.11/contrib/arm/inflate.c:87: .../arm_neon.h:31:2: error: #error You must enable NEON instructions (e.g. -mfloat-abi=softfp -mfpu=neon) to use arm_neon.h #error You must enable NEON instructions (e.g. -mfloat-abi=softfp -mfpu=neon) to use arm_neon.h ^ In file included from .../zlib-1.2.11/contrib/arm/inflate.c:87:0: .../zlib-1.2.11/contrib/arm/chunkcopy.h:18:9: error: unknown type name 'uint8x16_t' typedef uint8x16_t chunkcopy_chunk_t; ^ [...] CMakeFiles/zlib.dir/build.make:302: recipe for target 'CMakeFiles/zlib.dir/contrib/arm/inflate.o' failed Fixes: 3acecba520 "package/libs/zlib: Add ARM and NEON optimizations" Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: set group_mgmt_cipher when ieee80211w is enabledJo-Philipp Wich2018-01-071-1/+3
| | | | | | | | | | | | In order to properly support 802.11w, hostapd needs to advertise a group management cipher when negotiating associations. Introduce a new per-wifi-iface option "ieee80211w_mgmt_cipher" which defaults to the standard AES-128-CMAC cipher and always emit a "group_mgmt_cipher" setting in native hostapd config when 802.11w is enabled. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* argp-standalone: clean up patch fuzzKevin Darbyshire-Bryant2018-01-051-8/+8
| | | | | | Refresh patches to tidy up fuzz. No functional changes Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* lua: clean up patch fuzzKevin Darbyshire-Bryant2018-01-055-43/+44
| | | | | | Refresh patches to tidy up fuzz. No functional changes Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* busybox: clean up patch fuzzKevin Darbyshire-Bryant2018-01-052-8/+3
| | | | | | Refresh patches to tidy up fuzz. No functional changes Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* lantiq: fix wbmr-hp-g300h image metadataMathias Kresin2018-01-041-2/+2
| | | | | | | The Annex A and Annex B version are using the same (old) userspace boardname. Update the SUPPORTED_DEVICES to allow an update from lede-17.01. Signed-off-by: Mathias Kresin <dev@kresin.me>
* scripts/package-metadata.pl: remove broken detection of self-dependenciesMatthias Schiffer2018-01-041-5/+0
| | | | | | | | | | | | | A self-dependency is not an error worth a warning; rather, it is very common: whenever there are dependencies between different binary packages originating from the same source package, such dependencies occur. Not actually generating dependency rules is correct, but already handled a few lines below. A typo prevented this redundant rule from working, which is the reason the warning was not actually printed. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* opkg: switch source url to git.openwrt.orgJo-Philipp Wich2018-01-041-2/+2
| | | | | | | As LEDE is rebranding to OpenWrt now, adjust the Git source references accordingly. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* sdk: switch base feed url to git.openwrt.orgJo-Philipp Wich2018-01-041-1/+1
| | | | | | | As LEDE is rebranding to OpenWrt now, adjust the base feed Git reference accordingly. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: preinit: use board_name on Sm Super ServersPhilip Prindeville2018-01-041-1/+8
| | | | | | | | | Supermicro puts "Super Server" into their product_name DMI value for a whole slew of products, making this value about as useful as not having been filled in at all. Instead, fall back on the board_name instead. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* x86: preinit: make name rewrite into reusable functionPhilip Prindeville2018-01-041-6/+10
| | | | | | | | There might be other places (such as vendor-supplied preinit scripts) where we wish to take a DMI name and clean it up in a consistent way, so make the sed command into a function. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* netifd: update to latest git HEADHans Dedecker2018-01-041-3/+3
| | | | | | fd5c399 proto: allow dumping protocol handlers without config_params Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* merge: github: use OpenWrt in issue/pr templatesStijn Tintel2018-01-032-4/+4
| | | | | | Keep the link to submitting patches for now. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: bump 4.14 to 4.14.11Stijn Tintel2018-01-0315-43/+44
| | | | | | | | | | | | | | | Rename unwinder config symbols to match upstream changes. Refresh patches. Update patch that no longer applies: 202-reduce_module_size.patch Also enable CONFIG_PAGE_TABLE_ISOLATION. This feature was backported from 4.15 to the 4.14 stable series. It is enabled by default, so enable it in OpenWrt as well. Compile-tested on x86/64. Runtime-tested on x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: move CONFIG_KASAN to generic configStijn Tintel2018-01-027-4/+3
| | | | | | | | | | While bumping 4.14, the kernel build failed due to missing CONFIG_KASAN symbol. Move it to generic config instead of defining it for all arm64 and x86/64 targets. It was only added in 4.0, so not needed in config-3.18. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* uci: add missing 'option' support to uci_rename()Tony Ambardar2018-01-021-2/+3
| | | | | | | When using the uci.sh wrapper, allow parameters to match those supported by the uci binary i.e. "uci rename <config>.<section>[.<option>]=<name>". Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* package/libs/zlib: Add host buildDaniel Engberg2018-01-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Some packages such as Python/Python3 (host pip/pip3) needs this to compile. More detailed explanation provided by Alexandru: "i need the zlib/host for Python/Python3 ; because, it seems the host pip/pip3 needs this to work ; i suspect in older versions this worked, because some of the host's build env would be used in the build, and then the zlib-dev from the host distro would be used ; now, the host-build does not seem to have any -I/usr/include stuff, which is good and it also seems that Python/Python3 does not like it if the zlib-dev package is too old, so using this zlib/host would be good for this as well" Source: https://github.com/lede-project/source/pull/1329#issuecomment-351055861 Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/zlib: Add option for O3 optimizationDaniel Engberg2018-01-022-0/+21
| | | | | | | | | | Add option to use O3 optimization as not all devices have space constraints. This option is default using GCC in upstream but isn't in the CMake makefile for some reason. Source: https://github.com/madler/zlib/blob/master/configure#L170 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/zlib: Add ARM and NEON optimizationsDaniel Engberg2018-01-024-1/+2770
| | | | | | | | | | | | | | | | | | | This adds two optimizations for ARM: NEON optimized Adler(-)32 checksum algorithm (ARMv7 and newer NEON CPUs) ARM(v7+) specific optimization for inflate I've also connected inflate optimization to the build using the following source as template. https://github.com/mirror/chromium/commit/0397489124ce7e6aced020f8b85f5034c7d5f49b#diff-a62ad2db6c83dbc205d34bb9a8884f16 Additional info: https://codereview.chromium.org/2676493007/ https://codereview.chromium.org/2722063002/ Sources: https://github.com/madler/zlib/pull/251 (only the first commit) https://github.com/madler/zlib/pull/256 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/zlib: Use toolchain build logicDaniel Engberg2018-01-021-22/+4
| | | | | | Use build logic provided by toolchain instead of doing it manually. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* procd: procd_send_signal use signal namesKevin Darbyshire-Bryant2018-01-022-1/+5
| | | | | | | | | | | Usage documentation for 'procd_send_signal' states "The signal is SIGHUP by default, and must be specified by NAME." Make actual behaviour match the stated documented behaviour. https://wiki.openwrt.org/inbox/procd-init-scripts Suggested-by: Jo-Philip Wich <jow@mein.io> Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* procd: update to latest git HEADJohn Crispin2018-01-021-3/+3
| | | | | | | | a5954cf procd: Add %m to several functions that return errno. 810d7a5 procd: Remove redundant errno variable in several printf functions. fa5ce1c procd: Replace strerror(errno) with %m. Signed-off-by: John Crispin <john@phrozen.org>
* umdns: update to latest git HEADJohn Crispin2018-01-021-3/+3
| | | | | | 7897441 umdnsd: Replace strerror(errno) with %m. Signed-off-by: John Crispin <john@phrozen.org>
* kernel: make uas work during early bootDaniel Albers2018-01-021-1/+1
| | | | | | | | | | | | Add the uas(p) module to the modules loaded early on the boot process. The uas(p) is an modern alternative, which is used by the modern USB3 storage cases, compared to the bot protocol. To be able to use uas(p) storage cases for extroot, the kernel module has to be loaded before the search for extroot has been called. This patch changes the load order to support uas(p) storage cases for extroot. Signed-off-by: Daniel Albers <daniel.albers@public-files.de>
* fstools: update to latest git HEADJohn Crispin2018-01-021-3/+3
| | | | | | | | | 11efbf3 overlay: fix race condition when switching to jffs2 bdeb95a libblkid-tiny: add support for NTFS superblock ef2cc03 fstools: Replace strerror(errno) with %m format. 98fd5b4 libblkid-tiny: add support for UBI superblock Signed-off-by: John Crispin <john@phrozen.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 08:24:28 +0000