aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* libressl: disable shared libraries, fixes build issuesFelix Fietkau2016-12-281-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath9k: fix issues with external reset on AR913xFelix Fietkau2016-12-274-9/+10
| | | | | | | | An external reset patch for AR955x accidentally led to external reset being issued twice on AR913x, once before the RTC reset and once after. This may be causing some stability issues. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* relayd: fix expiry time handlingFelix Fietkau2016-12-271-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* relayd: fix reload / interface restart issuesFelix Fietkau2016-12-273-4/+2
| | | | | | | - replace the hotplug script with an interface trigger - add netdev params to procd to trigger restart Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kirkwood: enable initramfs images by defaultFelix Fietkau2016-12-271-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath5k: drop bogus warning on drv_set_key with unsupported cipher (FS#334)Felix Fietkau2016-12-271-0/+23
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath9k: remove old rx dma stop check optimizationFelix Fietkau2016-12-271-28/+0
| | | | | | | | | | This commit was added to improve reset time on old SoC devices that run into chip hangs more frequently. However with the more recent addition of full WMAC reset on these chips, it could be problematic. Drop this patch to ensure that DMA activity is really stopped before the chip reset is issued Signed-off-by: Felix Fietkau <nbd@nbd.name>
* odhcpd: bump to git HEADStijn Tintel2016-12-271-3/+3
| | | | | | | 8dc2a59 Revert "Respect interface "ignore" settings as documented." 93ab25b router: skip parse_routes when ra_default > 1 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* opkg: vfork external gzip command to uncompress dataJo-Philipp Wich2016-12-274-23/+746
| | | | | | | | | | | | | | | | | | Opkg's builtin decompression code is unsuitable to process nested archives as it uses a single shared state and relies on undefined seek behaviour for pipes. Rework the extraction logic to use the external gzip command as I/O filter for decompressing data and remove the builtin inflate code entirely. This shrinks the final opkg binary by about 4KB and results in less runtime memory consumption due to efficient use of vfork() and less copy-on-write operations in the forked child. Rework by Felix: create a thread that relays data to the gzip process instead of using a fragile poll loop Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "opkg: vfork external gzip command to uncompress data"Stijn Tintel2016-12-274-746/+23
| | | | | | This reverts commit 0090adcd5c94adad2168cd9b338f45827533c81d. It breaks reading package list in /tmp/opkg-lists, making it impossible to install packages from feeds in snapshots.
* odhcpd: Use procd_send_signal in reload_serviceHans Dedecker2016-12-261-1/+1
| | | | | | | Replace killall HUP by procd_send_signal in reload_service to trigger an odhcpd config reload Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* opkg: add missing dependency on libpthreadFelix Fietkau2016-12-261-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mwlwifi: Update to latest sourceGabe Rodriguez2016-12-261-3/+3
| | | | | | | | -MAC register revisions for 8864 firmware Tested on WRT1900ACv1 (mvebu). No regressions Signed-off-by: Gabe Rodriguez <lifehacksback@gmail.com>
* package/Makefile & ipkg-make-index.sh: add full package data listAlberto Bursi2016-12-262-2/+3
| | | | | | | | | | | | | | | | | | | The external script used to generate the package lists for the LEDE wiki's table of packages [1] and package indexes [2] requires a "Source:" field in the package lists to find package makefiles. The package makefiles are used to read the package's Category and Submenu. The "Source:" field was removed in commit b4aa3c899cbf1f81cd8a1ea197481ac84a9d646e to reduce package list sizes and lessen opkg issues in low ram devices. Add a separate package list file with full data to be used by the wiki's script. It's called Packages.manifest and isn't compressed as it's not necessary. 1. https://lede-project.org/packages/start 2. https://lede-project.org/packages/index/start Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* musl: refresh patchesKoen Vandeputte2016-12-261-1/+1
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* musl: backport various post-1.1.15 fixesKoen Vandeputte2016-12-2626-0/+1513
| | | | | | | | | | | Backport most important fixes up to latest HEAD - Taken post-commit reverts/fixes into account Compile tested Run-tested on cns3xxx & imx6 targets Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* musl: rename a custom backport patchKoen Vandeputte2016-12-261-0/+0
| | | | | | Ensure there is room in the numbering for next patches Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* opkg: vfork external gzip command to uncompress dataJo-Philipp Wich2016-12-264-23/+746
| | | | | | | | | | | | | | | | | | Opkg's builtin decompression code is unsuitable to process nested archives as it uses a single shared state and relies on undefined seek behaviour for pipes. Rework the extraction logic to use the external gzip command as I/O filter for decompressing data and remove the builtin inflate code entirely. This shrinks the final opkg binary by about 4KB and results in less runtime memory consumption due to efficient use of vfork() and less copy-on-write operations in the forked child. Rework by Felix: create a thread that relays data to the gzip process instead of using a fragile poll loop Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: split kmod-lib-zlib into two packages to keep it in sync with kernel ↵Felix Fietkau2016-12-263-13/+21
| | | | | | | | dependencies Fixes build error on default config + selecting kmod-fs-isofs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: Upstep to git HEAD versionHans Dedecker2016-12-251-3/+3
| | | | | | | | | 64a655d proto: allow configuring deprecated static IPv6 addresses c99182e remove obsolete /opt/local prefix on Mac OS X 0249d5f system-linux: Don't set gre tunnel ttl by default to 64 (#FS312) edc15ca ubus: Display the IPv6 prefix assigned address Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* gre: Remove ttl default value assignment (FS#312)Hans Dedecker2016-12-252-2/+2
| | | | | | | Don't assign a default ttl of 64 for gre tunnels as netifd takes care of the default ttl assignment Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ltq-vmmc: mark VOICE_CPE_VMMC_PMC as brokenHauke Mehrtens2016-12-251-0/+1
| | | | | | | We do not have the needed platform support for VOICE_CPE_VMMC_PMC. The vmmc driver will not compile with this option activated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ppc44x: fix build of crypto4xx_core.cHauke Mehrtens2016-12-251-0/+46
| | | | | | | | crypto4xx_probe() is in the __init section and referenced by code form other sections, which causes a build error. Backport a patch from mainline kernel to fix this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kmod-sched-cake: do not build on kernel 3.18Hauke Mehrtens2016-12-251-1/+1
| | | | | | | kmod-sched-cake does not build on kernel 3.18, so add the dependency to not even try. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: fix falcon buildJohn Crispin2016-12-251-1/+1
| | | | | | | | | The following commit changed the build templates name but forgot to update the TARGET_DEVICES variable properly. commit f9226158bed52aeae408730 (lantiq: rename EASY98000 to EASY98000NOR) Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: rename EASY98000 to EASY98000NORHauke Mehrtens2016-12-241-2/+1
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add KERNEL_DEVMEM and KERNEL_DEVKMEMHauke Mehrtens2016-12-241-0/+14
| | | | | | | | | These options are needed to create /dev/mem or /dev/kmem . /dev/mem is needed by the io tool to access raw hardware memory, which is helpful when debugging and developing drivers. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org>
* brcmfmac: select 802.11ac supportFelix Fietkau2016-12-241-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rb532: remove linux 4.1 supportFelix Fietkau2016-12-244-224/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rb532: Switch to kernel 4.4Florian Fainelli2016-12-241-1/+1
| | | | Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* rb532: Backport fix to resolve oops during korina_restartFlorian Fainelli2016-12-241-0/+56
| | | | Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* rb532: Add support for kernel 4.4Florian Fainelli2016-12-244-0/+225
| | | | Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* rb532: Fix initramfs kernel imagesFlorian Fainelli2016-12-241-1/+1
| | | | | | | The generic lzma-loader uses vmlinux.lzma as an input to compress so we need to provide a lzma compressed version of the initramfs kernel. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* toolchain/gcc: update 6.x to 6.3.0Syrone Wong2016-12-2425-9/+7
| | | | | | | | This is a bugfix release Build and run tested on mvebu/Linksys WRT1900AC v1 Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
* libpcap: Fix build when PACKAGECONFIG ipv6 is not enabledZefir Kurtisi2016-12-242-0/+108
| | | | | | | | | | | | | | | | | | Add patches provided upstream [1] by Fabio Berton to fix error: > ./gencode.c: In function 'pcap_compile': > ./gencode.c:693:8: error: 'compiler_state_t {aka struct _compiler_state}' has no member named 'ai' > cstate.ai = NULL; > ^ > ./gencode.c: In function 'gen_gateway': > ./gencode.c:4914:13: error: 'cstate' undeclared (first use in this function) > bpf_error(cstate, "direction applied to 'gateway'"); > ^ [1] https://github.com/the-tcpdump-group/libpcap/pull/541 Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Tested-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
* lantiq: drop the FRITZ7360SL led-dsl aliasMathias Kresin2016-12-241-1/+0
| | | | | | | | | | | | | The power LED can not be used for indicating the xDSL line state and the in system (boot) state at the same time in LEDE. As soon as the xDSL Line goes down, the power LED is switched off. During xDSL handshake the power led would blink with the same or a similar pattern as during boot. Both might confuse users. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: add FRITZ7360SL phy reset gpiosMathias Kresin2016-12-241-5/+5
| | | | | | | | | | | | | | | Due to a hardware bug of Atheros 8030 phys, the driver need to reset the phys on link state change. Use the correct compatible string for the at903x phys connected to switch port 0 and 1. Fix the pinmux of the gpio lines connected to the reset pin of the phys and define the reset-pins to let the driver do the fixups. Fixes FS#343 Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix DGN1000B boot status ledsMathias Kresin2016-12-241-9/+7
| | | | | | The alias node should not be a child of the chosen node. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use new image build code for more devicesMathias Kresin2016-12-2420-413/+447
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use different board names for variantsMathias Kresin2016-12-2414-30/+49
| | | | | | | | | | | | Use different names for flash size related board variants, to make sure that only images for the actual flash size are considered as valid by the image validation code. Remove the flash size suffix from the string returned by ramips_board_detect() to ensure that existing scripts relying on the former used boardname are still working. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: sort rt305x image file alphabeticalMathias Kresin2016-12-241-218/+155
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use D-Link DIR-600 B1 image for B2 versionMathias Kresin2016-12-246-121/+1
| | | | | | | Everything set for the B1 is identical to the values uses for the B2 version. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix image validation errorsMathias Kresin2016-12-244-13/+15
| | | | | | | | | | | The name from the Device define will be used in the metadata. Due to typos/different spelling, this name might not match the one exported in /lib/ramips.sh. Fix all name mismatches which were found by checking if the name used in the metadata exists in /lib/ramips.sh. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use destinct 11AC NAS board nameMathias Kresin2016-12-246-30/+44
| | | | | | | | | | Use a distinct board name even if the board is near to identical to the WeVO W2914NS v2. To make sure that a 11AC NAS image can not be installed on a WeVO W2914NS v2, both board need to use different names. Signed-off-by: Mathias Kresin <dev@kresin.me>
* orion: remove linux 3.18 supportFelix Fietkau2016-12-245-890/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* orion: enable SoC drivers in the kernel configFelix Fietkau2016-12-245-294/+37
| | | | | | Clean up packaged modules Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kirkwood: clean up profiles, move to image makefileFelix Fietkau2016-12-246-234/+28
| | | | | | Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kirkwood: enable SoC drivers in the kernel configFelix Fietkau2016-12-244-28/+22
| | | | | | Clean up packaged modules Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kirkwood: clean up FEATURESFelix Fietkau2016-12-241-1/+1
| | | | | | | | | Remove dt: it is implicitly enabled based on the kernel config Remove tar.gz and jffs2_nand: Legacy build code has been removed, NAND devices are only supported with UBI now. Remove ubifs: deprecated, use squashfs images instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kirkwood: remove legacy image build codeFelix Fietkau2016-12-241-96/+0
| | | | | | This has been mostly non-functional for a while now Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 20:46:03 +0000