aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* generic: mt7530: fix null pointer dereferencing in port5 setupDENG Qingfang2020-04-041-0/+39
| | | | | | | | | | | | | The 2nd gmac of mediatek soc ethernet may not be connected to a PHY and a phy-handle isn't always available. Unfortunately, mt7530 dsa driver assumes that the 2nd gmac is always connected to switch port 5 and setup mt7530 according to phy address of 2nd gmac node, causing null pointer dereferencing when phy-handle isn't defined in dts. This commit fix this setup code by checking return value of of_parse_phandle before using it. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* generic: backport support for MT7530 DSA port mirroringDENG Qingfang2020-04-041-0/+123
| | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: correct MTC WR1201 LAN ports namesRené van Dorst2020-04-041-4/+4
| | | | | | | LAN ports of MTC WR1201 are reversed, so correct their names Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: add new NAND driverDENG Qingfang2020-04-044-2/+1496
| | | | | | Add new NAND driver for MT7621 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: drop obsolete mx25l25635f dts hackDENG Qingfang2020-04-042-2/+2
| | | | | | 5.4 kernel has fixed this issue, so the hack is no longer needed. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* Revert "ramips: mt7621: disable images for gehua_ghl-r-001"DENG Qingfang2020-04-041-1/+0
| | | | | | | This reverts commit 28080d54d217fb4ab112e079f69462fee695dbf8. Support for MX25L25635F flash is fixed upstream Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: move swconfig to subtargets except for MT7621DENG Qingfang2020-04-046-7/+6
| | | | | | | As MT7621 does not use swconfig anymore, move the package swconfig to other subtargets. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: introduce 'soc_device' initializationDENG Qingfang2020-04-041-0/+89
| | | | | | | | | | | | | | | mt7621 SoC has its own 'ralink_soc_info' structure with some information about the soc itself. Pcie controller and pcie phy drivers for this soc which are still in staging git tree make uses of 'soc_device_attribute' looking for revision 'E2' in order to know if reset lines are or not inverted. This way of doing things seems to be necessary in order to make things clean and properly. Hence, introduce this 'soc_device' to be able to properly use those attributes in drivers. Also set 'data' pointer points to the struct 'ralink_soc_info' to be able to export also current soc information using this mechanism. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: fix MikroTik 750Gr3 LAN ports namesDENG Qingfang2020-04-042-4/+7
| | | | | | They are labeled as LAN2..LAN5 instead of LAN1..LAN4 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: use SoC I2C instead of bitbanged for Ubiquiti ER-X-SFPDENG Qingfang2020-04-043-13/+8
| | | | | | | The original idea of bitbanged I2C is to use i2c-gpio-custom Since i2c-gpio-custom is no longer available on 5.4, use SoC I2C instead Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: fix Ubiquiti ER-X ports names and MAC addressesDENG Qingfang2020-04-042-7/+18
| | | | | | | | | | | | | | | | | The name of each user port should be eth0..4, instead of lan1..4 and there is no WAN port. Rename them to match the official firmware. To avoid conflict with the master port (gmac0), rename it to "dsa". The official firmware assigns MAC address in this way: eth0 = label mac eth1 = label mac + 1 ... eth4 = label mac + 4 Since we have switched to DSA, it's possible to use different MAC for each port. Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: net-label supportDENG Qingfang2020-04-041-0/+34
| | | | | | Add support for renaming ethernet interfaces in DTS Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: switch kernel version to 5.4DENG Qingfang2020-04-041-0/+2
| | | | | | | After all dts and config changes, 4.14 no longer works on mt7621. Switch it to 5.4 directly. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: change default ramips_setup_interfaces configurationDENG Qingfang2020-04-041-63/+1
| | | | | | | Most of MT7621 boards have LAN1~4 and WAN, so make this as the default Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621 remove unused pinctrl groups in dtsDENG Qingfang2020-04-0412-12/+12
| | | | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [split commit, remove leftover uart3->gpio setup] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: update dts/defconfig for DSADENG Qingfang2020-04-0470-317/+1888
| | | | | | | | | | | update dts and network/LED configuration for DSA driver. sysupgrade from images prior to this commit with config preserved will cause broken ethernet setup. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> Acked-by: Jo-Philipp Wich <jo@mein.io> [split commit] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: backport GPIO driver fixDENG Qingfang2020-04-042-0/+118
| | | | | | Backport 2 patches from linux-next to fix mt7621 GPIO driver Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: update PCIe node in dtsiDENG Qingfang2020-04-041-14/+29
| | | | | | Update PCIe node in dtsi to match the new driver Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: backport PCIe driver fixes from staging-testDENG Qingfang2020-04-0420-0/+1730
| | | | | | Backport mt7621-pci/mt7621-pci-phy fixes from staging-test Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: update pinctrl nodesDENG Qingfang2020-04-0466-156/+156
| | | | | | Upstream GPIO driver uses "groups" "function" properties Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: convert GPIO dts refsDENG Qingfang2020-04-0470-374/+374
| | | | | | | The upstream driver does not use &gpio0..2 banks notation anymore, so convert them to &gpio Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: replace gpio/eth nodes in mt7621.dtsiDENG Qingfang2020-04-041-42/+94
| | | | | | | There's different gpio and ethernet drivers upstream for mt7621. Update these two nodes to match upstream dt bindings. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: refresh kernel configDENG Qingfang2020-04-041-52/+68
| | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: refresh patchesDENG Qingfang2020-04-0444-9770/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed/solved elsewhere upstream: - 0001-MIPS-ralink-Add-rt3352-SPI_CS1-pinmux.patch - 0002-MIPS-pci-rt2880-set-pci-controller-of_node.patch - 0004-MIPS-ralink-add-MT7621-pcie-driver.patch - 0009-PCI-MIPS-enable-PCIe-on-MT7688.patch - 0025-pinctrl-ralink-add-pinctrl-driver.patch - 0028-GPIO-ralink-add-mt7621-gpio-controller.patch - 0043-spi-add-mt7621-support.patch - 0045-i2c-add-mt7621-driver.patch - 0047-DMA-ralink-add-rt2880-dma-engine.patch - 0053-mtd-spi-nor-add-w25q256-3b-mode-switch.patch - 0054-mtd-spi-nor-w25q256-respect-default-mode.patch - 0099-pci-mt7620.patch - 304-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch Removed because of the new NAND driver: - 0038-Revert-mtd-nand-Remove-unused-chip-write_page-hook.patch - 0039-mtd-add-mt7621-nand-support.patch - 0040-nand-hack.patch Remove patch that no longer applies (needs rework): - 0034-NET-multi-phy-support.patch Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mtk-mmc: set correct DMA maskDENG Qingfang2020-04-041-1/+1
| | | | | | | | | | | Since commit f8c55dc ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") changed MIPS dma handling, the mmc driver fails because it doesn't have a dma mask is set. So set the correct dma mask. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: move MTK MMC driver to files directoryDENG Qingfang2020-04-047-0/+0
| | | | | | | Move MTK MMC driver from "files-4.14" to "files" so kernel 5.4 can use it Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: copy patches and kernel config to 5.4DENG Qingfang2020-04-0450-0/+14495
| | | | | | Copy patches and kernel config to 5.4 for ramips Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* bcm53xx: refactor board.d code in 02_networkRafał Miłecki2020-04-031-94/+95
| | | | | | | | | | | 1. Use functions for cleaner code 2. Always execute WAN interface generic code Before this change WAN interface code wasn't executed on all devices due to an early "exit 0". Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add module for Mellanox mlx Network DriverTan Zien2020-04-031-0/+35
| | | | | | | | add module to support Mellanox Connect-X card mlx4 supports ConnectX-3 series and previous cards mlx5 supports Connect-IB/ConnectX-4 series and later cards Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* imx6: bootscript: use partition UUID for rootfs if possibleTim Harvey2020-04-031-14/+20
| | | | | | | | | | | | | Specifying root filesystem by device is non-deterministic for several reasons: - USB device unmeration order is not garunteeed for USB storage devs - MMC devs ordering is determined by the instance of the MMC host controller including non-storage SDIO devices which can throw off numbering depending on kernel versions. It is recommended to use partition UUID Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* octeontx: switch to kernel 5.4Tim Harvey2020-04-031-2/+1
| | | | | | 5.4 is stable on Gateworks Newport GW610x/GW620x/GW630x/GW640x Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* build: refactor JSON info files to `profiles.json`Paul Spooren2020-04-036-66/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | JSON info files contain machine readable information of built profiles and resulting images. These files were added in commit 881ed09ee6e2 ("build: create JSON files containing image info"). They are useful for firmware wizards and script checking for reproducibility. Currently all JSON files are stored next to the built images, resulting in up to 168 individual files for the ath79/generic target. This patch refactors the JSON creation to store individual per image (not per profile) files in $(BUILD_DIR)/json_info_files and create an single overview file called `profiles.json` in the target directory. Storing per image files and not per profile solves the problem of parallel file writes. If a profiles sysupgrade and factory image are finished at the same time both processes would write to the same JSON file, resulting in randomly broken outputs. Some target like x86/64 do not use the image code yet, resulting in missing JSON files. If no JSON info files were created, no `profiles.json` files is created as it would be empty anyway. As before, this creation is enabled by default only if `BUILDBOT` is set. Tested via buildroot & ImageBuilder on ath79/generic, imx6 and x86/64. Signed-off-by: Paul Spooren <mail@aparcar.org> [json_info_files dir handling in Make, if case refactoring] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* grub2: fix build when ASLR enabledKevin Darbyshire-Bryant2020-04-021-2/+3
| | | | | | | | | | | | | | Disable ASLR and filter '-fno-plt' from CFLAGS: solves building when ASLR enabled by basically disabling ASLR. Solves errors similar to: relocation R_X86_64_32S against `.rodata' can not be used when making a PIE object; recompile with -fPIE or module missing GLOBAL_OFFSET_TABLE Suggested-by: 李国 <uxgood.org@gmail.com> Acked-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kmod-sched-cake: switch to in-tree cake for 4.19+Kevin Darbyshire-Bryant2020-04-017-3/+642
| | | | | | | | | | | | | | Use in tree version of cake for kernels 4.19+ and backport features from later kernel versions to 4.19. Unfortunately PROVIDES dependency handling produces bogus circular dependency warnings so whilst this package and kmod-sched-cake-oot should be able to PROVIDE kmod-sched-cake this doesn't work. Instead, remove the PROVIDES option and modify package sqm-scripts to depend on the correct module independently. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kmod-sched-cake: rename to kmod-sched-cake-ootKevin Darbyshire-Bryant2020-04-011-6/+7
| | | | | | | | | | | | | In preparation for dropping the out of tree cake module and using in tree cake from upstream, rename the package to kmod-sched-cake-oot (out of tree) Initially add a PROVIDES kmod-sched-cake so that package dependencies can be satisfied. Ultimately this package will be removed when linux 4.14 is removed. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* wireguard: bump to 1.0.20200401Jason A. Donenfeld2020-04-011-2/+2
| | | | | | | Recent backports to 5.5 and 5.4 broke our compat layer. This release is to keep things running with the latest upstream stable kernels. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* mac80211: rt2x00: prune more unnecessary exportsDaniel Golle2020-04-015-137/+27
| | | | | | | | | | | | The calibration patches for MT7620 unnecessarily export symbols and populate never accessed function pointers. Remove all that and make functions static as the only place where each of those functions is called is within rt2800lib.c. Also make code more readable by fixing indentation, removing unnecessary parantheses and simplifying some instructions using shorthands here and there. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* jansson: convert to cmakeKevin Darbyshire-Bryant2020-04-011-14/+9
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* openssl: bump to 1.1.1fEneas U de Queiroz2020-04-012-83/+3
| | | | | | | | | There were two changes between 1.1.1e and 1.1.1f: - a change in BN prime generation to avoid possible fingerprinting of newly generated RSA modules - the patch reversing EOF detection we had already applied. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* oxnas: some improvements for Shuttle KD20Daniel Golle2020-03-313-7/+59
| | | | | | | | | * install kmod-hwmon-drivetemp by default * wire up thermal zone * fix fan GPIO polarity * fix i2c-gpio GPIO_OPEN_DRAIN Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: fix warning in SATA driverDaniel Golle2020-03-311-1/+1
| | | | | | | | | drivers/ata/sata_oxnas.c: In function 'sata_oxnas_port_irq': drivers/ata/sata_oxnas.c:2126:25: warning: left shift count >= width of type [-Wshift-count-overflow] if (ap->qc_active & (1 << ATA_TAG_INTERNAL)) { ^~ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: fix DAP-2610 boot failurePetr Štetiar2020-03-311-0/+1
| | | | | | | | | | | | | Albert has reported, that his DAP-2610 wont boot with the latest snapshot and Fredrik has found out, that the device gets stuck at "Waiting for root device ..." due to missing 5.4 kernel config symbol CONFIG_MTD_SPLIT_WRGG_FW which was probably lost during the kernel version bump. Ref: https://forum.openwrt.org/t/dap-2610-bricked-help-needed Fixes: 272e0a702a2b ("ipq40xx: add v5.4 support") Suggested-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86/64: add cdrom and iso9660 drivers李国2020-03-312-0/+8
| | | | | | | The iso image need cdrom and iso9660 drivers to boot, otherwise it will hang when mounting the root file system Signed-off-by: 李国 <uxgood.org@gmail.com>
* x86: generate EFI platform bootable images李国2020-03-3112-38/+165
| | | | | | | | | | | | | | | | | Add EFI platform bootable images for x86 platforms. These images can also boot from legacy BIOS platform. EFI System Partition need to be fat12/fat16/fat32 (not need to load filesystem drivers), so the first partition of EFI images are not ext4 filesystem any more. GPT partition table has an alternate partition table, we did not generate it. This may cause problems when use these images as qemu disk (kernel can not find rootfs), we pad enough sectors will be ok. Signed-off-by: 李国 <uxgood.org@gmail.com> [part_magic_* refactoring, removed genisoimage checks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* grub2: make some change to add efi platform support李国2020-03-312-28/+55
| | | | | | | | 1.generate boot image at Package/install section 2.move boot image to $(STAGING_DIR_IMAGE)/grub2/ 3.add efi variant to support efi platform Signed-off-by: 李国 <uxgood.org@gmail.com>
* firmware-utils: ptgen: add GPT support李国2020-03-312-24/+319
| | | | | | | | | | | | | | | | Add GPT support to ptgen, so we can generate EFI bootable images. Introduced two options: -g generate GPT partition table -G GUID use GUID for disk and increase last bit for all partitions We drop The alternate partition table to reduce size, This may cause problems when generate vmdk images or vdi images. We have to pad enough sectors when generate these images. Signed-off-by: 李国 <uxgood.org@gmail.com> [fixed compilation on macOS] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* bcm27xx-gpu-fw: update to latest version from RPi foundationÁlvaro Fernández Rojas2020-03-311-22/+15
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: update 5.4 patches from RPi foundationÁlvaro Fernández Rojas2020-03-3184-6/+7955
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* wireguard: bump to 1.0.20200330Jason A. Donenfeld2020-03-311-2/+2
| | | | | | | | | | | | | | | | | * queueing: backport skb_reset_redirect change from 5.6 * version: bump This release has only one slight change, to put it closer to the 5.6 codebase, but its main purpose is to bump us to a 1.0.y version number. Now that WireGuard 1.0.0 has been released for Linux 5.6 [1], we can put the same number on the backport compat codebase. When OpenWRT bumps to Linux 5.6, we'll be able to drop this package entirely, which I look forward to seeing. [1] https://lists.zx2c4.com/pipermail/wireguard/2020-March/005206.html Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* generic: mips: exclude more dsemul code when fpu-emu is not enabledYousong Zhou2020-03-301-0/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch is backported from mips-next. In addition to minor reduction of code size and runtime memory use, the more apparent difference is that the delay slot emulation page will not be present for those targets with fpu emulation disabled (CONFIG_MIPS_FP_SUPPORT=n) Memory maps of busybox before and after this change root@OpenWrt:/# cat /proc/self/maps 00400000-00449000 r-xp 00000000 00:02 23 /bin/busybox 00458000-00459000 r-xp 00048000 00:02 23 /bin/busybox 00459000-0045a000 rwxp 00049000 00:02 23 /bin/busybox 77dc0000-77de2000 r-xp 00000000 00:02 273 /lib/libgcc_s.so.1 77de2000-77de3000 r-xp 00012000 00:02 273 /lib/libgcc_s.so.1 77de3000-77de4000 rwxp 00013000 00:02 273 /lib/libgcc_s.so.1 77de4000-77e7b000 r-xp 00000000 00:02 271 /lib/libc.so 77e8a000-77e8c000 rwxp 00096000 00:02 271 /lib/libc.so 77e8c000-77e8e000 rwxp 00000000 00:00 0 7fd86000-7fda7000 rw-p 00000000 00:00 0 [stack] 7fefd000-7fefe000 r-xp 00000000 00:00 0 7ffe6000-7ffe7000 r--p 00000000 00:00 0 [vvar] 7ffe7000-7ffe8000 r-xp 00000000 00:00 0 [vdso] root@OpenWrt:/# cat /proc/self/maps 00400000-00449000 r-xp 00000000 00:02 23 /bin/busybox 00458000-00459000 r-xp 00048000 00:02 23 /bin/busybox 00459000-0045a000 rwxp 00049000 00:02 23 /bin/busybox 77d55000-77d77000 r-xp 00000000 00:02 274 /lib/libgcc_s.so.1 77d77000-77d78000 r-xp 00012000 00:02 274 /lib/libgcc_s.so.1 77d78000-77d79000 rwxp 00013000 00:02 274 /lib/libgcc_s.so.1 77d79000-77e10000 r-xp 00000000 00:02 272 /lib/libc.so 77e1f000-77e21000 rwxp 00096000 00:02 272 /lib/libc.so 77e21000-77e23000 rwxp 00000000 00:00 0 7fe23000-7fe44000 rw-p 00000000 00:00 0 [stack] 7ff63000-7ff64000 r--p 00000000 00:00 0 [vvar] 7ff64000-7ff65000 r-xp 00000000 00:00 0 [vdso] Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-29 19:24:11 +0000