aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: cleanup netgear wnr612-v2 supported devicesMathias Kresin2018-08-081-1/+1
| | | | | | | The netgear,wnr612-v2 is included by default based on the device define. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath79: mark netgear variables as device specificMathias Kresin2018-08-081-0/+2
| | | | | | | | The variables are used in image build recipes and need to be marked as per devices vars to be stored individual per image define. Otherwise the last defined variable will be used for all boards. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath79: Fix led nodes for TL-WR740N v2 and add its clonesChuanhong Guo2018-08-0811-28/+138
| | | | | | | | | | | | | | | | This patch did the following things: 1. Separate ath9k-leds out of gpio leds so that all other leds will work before ath9k loded (e.g. during preinit/init stage). 2. Rename wps led to qss since that's how TP-Link mark it. 3. Rename LED prefix to tp-link because that dts is shared by many devices. 4. Rename to wr740n-v1 because v1 is the first and v2 just use the fw of v1. (This will require a forced sysupgrade if you comes from the previous wr740n v2 image.) 5. Remove SUPPORTED_DEVICES. (tl-wr740n-v2 doesn't exist anywhere so it's useless.) 6. Add all WR741ND v1 clones found in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: fix dts warningsMathias Kresin2018-08-0845-188/+90
| | | | | | | Fix all issues found by the devicetree compiler like wrong address/size cells as well as wrong/missing/superfluous unit addresses. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath79: fix node namesMathias Kresin2018-08-089-9/+9
| | | | | | Use the standardized node names from the devicetree specification. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath79: fix compatible stringsMathias Kresin2018-08-085-5/+5
| | | | | | | Use only the jedec,spi-nor compatible string. Everything else either never worked or is only support to keep compatibility. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath79: fix whitespace issue in dts filesMathias Kresin2018-08-088-24/+24
| | | | | | Fixes spaces vs. tabs issues and remove indentation on blank lines. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use #include syntax for dtsi filesMathias Kresin2018-08-082-2/+2
| | | | | | Use the same syntax for including dtsi for all dts files. Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: introduce sysupgrade signature chain verificationDaniel Golle2018-08-083-3/+31
| | | | | | | | | Verify ucert signature chains in sysupgrade images in case ucert is installed and $CHECK_IMAGE_SIGNARURE = 1. Also make sure ucert host binary is present and generate a self-signed ucert in case $TOPDIR/key-build.ucert is missing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* image: fix build without ucertDaniel Golle2018-08-081-1/+1
| | | | | | | | Make sure the Shell-expression returns true also in case of key-build.ucert being absent. Fixes commit 848b455d2e ("image: use ucert to append signature") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* image: use ucert to append signatureDaniel Golle2018-08-071-0/+6
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ucert: update sourceDaniel Golle2018-08-071-4/+10
| | | | | | | | | | | | ad816fc set rpath to make bundle-libraries.sh happy 63ad591 blob_buf needs to be zero'd Now that libubox, libjson-c and libblobms_json are installed into STAGING_DIR_HOST we can properly bundle ucert in the ImageBuilder. Follow-up commits will make use of it to include a signature-chain in sysupgrade images using fwtool. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libubox: set HOST_BUILD_PREFIXDaniel Golle2018-08-071-1/+2
| | | | | | | Install into STAGING_DIR_HOST rather than STAGING_DIR_HOSTPKG to make bundle-libraries.sh happy. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libjson-c: set HOST_BUILD_PREFIXDaniel Golle2018-08-071-1/+2
| | | | | | | Install into STAGING_DIR_HOST rather than STAGING_DIR_HOSTPKG to make bundle-libraries.sh happy. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libubox: fix source version dateJo-Philipp Wich2018-08-071-1/+1
| | | | | | | | The referenced Git commit was made on the 25th of July, not June. Fixes 432eaa940f ("libubox: fix mirror hash") Fixes 5dc32620c4 ("libubox: update to latest git HEAD") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* libubox: fix mirror hashJo-Philipp Wich2018-08-071-1/+1
| | | | | | | | | | | Correct the mirror hash to reflect whats on the download server. A locally produced libubox SCM tarball was also verified to yield an identical checksum compared to the one currently on the download server. Fixes FS#1707. Fixes 5dc32620c4 ("libubox: update to latest git HEAD") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* toolchain/glibc: update to latest 2.26 commitHans Dedecker2018-08-071-2/+2
| | | | | | | | | | | | | c9570bd2f5 x86: Populate COMMON_CPUID_INDEX_80000001 for Intel CPUs [BZ #23459] 86e0996b1a x86: Correct index_cpu_LZCNT [BZ #23456] cf6deb084b conform/conformtest.pl: Escape literal braces in regular expressions b12bed3e06 stdio-common/tst-printf.c: Remove part under a non-free license [BZ #23363] 20dc7a909a libio: Add tst-vtables, tst-vtables-interposed 4b10e69b1f Synchronize support/ infrastructure with master 762e9d63d5 NEWS: Reorder out-of-order bugs 2781bd5a86 libio: Disable vtable validation in case of interposition [BZ #23313] Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ustream-ssl: update to latest git HEADEneas U de Queiroz2018-08-071-4/+4
| | | | | | | | 23a3f28 openssl, wolfssl: match mbedTLS ciphersuite list 450ada0 ustream-ssl: Revised security on mbedtls 34b0b80 ustream-ssl: add openssl-1.1.0 compatibility Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
* cns3xxx: ethernet: use circular queue checks consistentlyKoen Vandeputte2018-08-071-15/+18
| | | | | | | Use the same method for setting queue index pointers consistenly throughout the source file. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* cns3xxx: ethernet: cleanup codeKoen Vandeputte2018-08-071-13/+22
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* cns3xxx: ethernet: fix signed/unsigned comparisonKoen Vandeputte2018-08-071-1/+1
| | | | | | Fixes a compiler warning Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* cns3xxx: add myself as maintainerKoen Vandeputte2018-08-071-2/+2
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.61Koen Vandeputte2018-08-072-4/+4
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.118Koen Vandeputte2018-08-074-18/+17
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* procd: update to latest git HEADHans Dedecker2018-08-061-3/+3
| | | | | | | | e29966f Allow disabling seccomp or changing the whitelist 5f57223 trace: Use properly sized type for PTRACE_GETEVENTMSG 747efb6 procd: fix ustream deadlock when there are 0 bytes or no newlines Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "netfilter: separate IPv6 relevant kernel modules from IPv4"Jo-Philipp Wich2018-08-062-67/+10
| | | | | | | | | This reverts commit 42a3c6465a230a4e03f2a185f4db5ac57b89f673. The change was apparently never build-tested with all kmods enabled. I took a brief look but found no simple way to untangle this, so revert it. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* netfilter: separate IPv6 relevant kernel modules from IPv4Rosy Song2018-08-062-10/+67
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* base-files: do not add relevant sections & options except when ipv6 is ↵Rosy Song2018-08-061-16/+26
| | | | | | support in kernel Signed-off-by: Rosy Song <rosysong@rosinson.com>
* ath79: rename tl-archer-c7 to archer-c7Chuanhong Guo2018-08-065-9/+9
| | | | | | | | This router is called Archer C7 and the tl was used to identify TP-LINK. Since we have added tplink in dts/board name, the tl prefix is useless now. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: alphabetical order image/generic.mkChuanhong Guo2018-08-061-9/+9
| | | | | | Move the wzr-hp-g450h in image/generic.mk to keep alphabetical order. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: rename dts/image using manufacturer_board schemeChuanhong Guo2018-08-0636-84/+79
| | | | | | | This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: remove quotes for boardname in scriptsChuanhong Guo2018-08-064-74/+74
| | | | | | Quotes are not required in case statements. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: put all devices in alphabetical order in scriptsChuanhong Guo2018-08-063-51/+38
| | | | | | | And remove specifying lan interfaces as eth1.1 because this is handled by ucidef_add_switch. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: fix support for TL-MR3020 v1Chuanhong Guo2018-08-062-6/+2
| | | | | | | | Change lan and it's LED to eth0 It's broken since c7c807cb8c3fd6538101de885f66d4681785defe where I changed the dts but forgot to change default configurations. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: fix support for TL-WR740N/WR741N v4Chuanhong Guo2018-08-064-5/+5
| | | | | | | | | | | 1. Swap eth0/eth1 Both devices are using AR9331, the builtin switch on AR9331 is connected to gmac1 and gmac1 is named as eth1 in ath79. PS: gmac1 is eth0 and gmac0 is eth1 in ar71xx because of the reversed initialization order. 2. Fix the incorrect compatible string in dts Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: remove useless phy-handle nodesChuanhong Guo2018-08-062-20/+1
| | | | | | | phy-handle is used to poll link status. They are useless when we need fixed-link on these interfaces. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: modules: fix kmod-regmap reduxChristian Lamparter2018-08-062-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jonas Gorski commented on the previous patch: |This is actually the wrong fix and papers over an issue in one of our |local patches. | |We intentionally allow regmap to be built as a module, see | |/target/linux/generic/hack-4.14/259-regmap_dynamic.patch |[...] |[The regulator code] optionally supports regmap thanks to the stubs |provided if regmap is disabled - which breaks if you compile regmap |as a module. In order to mitigate this issue, this patch reverts the previous patch and replaces the existing IS_ENABLED(CONFIG_REGMAP) with IS_REACHABLE(CONFIG_REGMAP). This solves this particular issue as the regulator code will now automatically fallback to the regmap stubs in case the kmod-regmap module is enabled, but nothing else sets CONFIG_REGMAP=y. Note: There's still a potential issue that this patch doesn't solve: If someone ever wants to make a OpenWrt kernel package for a regulator module that requires the REGMAP feature for a target that doesn't set CONFIG_REGMAP=y but has CONFIG_REGULATOR=y, the resulting kmod-regulator-xyz package will not work on the target. Luckily, there aren't any in-tree OpenWrt kernel module packages for regulators at the moment. On the bright side: regmap is a critical part nowadays and all new and upcoming architectures require it by default. This will likely only ever be a problem for legacy targets and devices that cannot afford to enable REGMAP. Cc: Jonas Gorski <jonas.gorski@gmail.com> Cc: John Crispin <john@phrozen.org> Fixes: d00913d1215b ("kernel: modules: fix kmod-regmap") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mt7620: gsw: make IntPHY and ExtPHY share mdio addr 4 possibleChen Minqiang2018-08-061-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | To share mdio addr for IntPHY and ExtPHY, as described in the documentation (MT7620_ProgrammingGuide.pdf). (refer: http://download.villagetelco.org/hardware/MT7620/MT7620_ProgrammingGuide.pdf) when port4 setup to work as gmac mode, dts like: &gsw { mediatek,port4 = "gmac"; }; we should set SYSCFG1.GE2_MODE==0x0 (RGMII). but SYSCFG1.GE2_MODE may have been set to 3(RJ-45) by uboot/default so we need to re-set it to 0x0 before this changes: gsw: 4FE + 2GE may not work correctly and MDIO addr 4 cannot be used by ExtPHY after this changes: gsw: 4FE + 2GE works and MDIO addr 4 can be used by ExtPHY Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* ramips: fix gigabit switch PHY access on MDIODaniel Gimpelevich2018-08-061-1/+2
| | | | | | | | | | When PHY's are defined on the MDIO bus in the DTS, gigabit support was being masked out for no apparent reason, pegging all such ports to 10/100. If gigabit support must be disabled for some reason, there should be a "max-speed" property in the DTS. Reported-by: James McKenzie <openwrt@madingley.org> Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* ramips: remove superfluous & confusing DT bindingDaniel Gimpelevich2018-08-065-7/+24
| | | | | | | | | | | Mediatek has a reference platform that pairs an MT7620A with an MT7530W, where the latter responds on MDIO address 0x1f while both chips respond on 0x0 to 0x4. The driver special-cases this arrangement to make sure it's talking to the right chip, but two different ways in two different places. This patch consolidates the detection without the current requirement of both tests to be separately satisfied in the DTS. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* ramips: add support for Edimax BR-6478AC v2Daniel Gimpelevich2018-08-066-1/+243
| | | | | | | | | | | | | | | | | | | | | | | | Roll-up of patches by Rohan Murch, Hans Ulli Kroll, and James McKenzie. Taken from https://forum.openwrt.org/viewtopic.php?id=67192 and updated. Specification: - System-On-Chip: MT7620A - CPU/Speed: 580 MHz - Flash-Chip: Macronix MX25L6405D - Flash size: 8192 KiB - RAM: 64 MiB - Wireless No1: SoC-integrated: MT7620A 2.4GHz 802.11bgn - Wireless No2: On-board chip: MT7612E 5GHz 802.11ac - Switch: Mediatek MT7530W Gigabit Switch - USB: Yes 1 x 2.0 Installation: 1. Download sysupgrade.bin 2. Open vendor web interface 3. Choose to upgrade firmware 4. After reboot connect via ethernet at 192.168.1.1 Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* imagebuilder: manifest function show stderrPaul Spooren2018-08-061-2/+2
| | | | | | | | This really simplifies debugging, if a package is not found or a feed is not reachable, a proper stderr is printed. Currently it would only say `_call_manifest` failed. Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: sysupgrade: abort if config backup failsAndreas Ziegler2018-08-062-1/+6
| | | | | | | Sysupgrade shouldn't proceed, if the backup of the configuration fails because tar (or gzip) exit with a non-zero code. Signed-off-by: Andreas Ziegler <dev@andreas-ziegler.de>
* scripts: time.pl: avoid hard Time::HiRes dependencyJo-Philipp Wich2018-08-051-4/+27
| | | | | | | Use Time::HiRes when available and fallback to raw syscall interface when not. If that fails too, simply report 0, 0 as real time. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: remove GNU time dependencyJo-Philipp Wich2018-08-053-6/+43
| | | | | | | | | | Replace the GNU time program invocation with a simple Perl script reporting the timing values. Since we require Perl anyway for the build system, we can as well use that instead of requiring a random GNU utility rarely installed by default. Fixes: ff6e62b288 ("build: log time taken by each packages/steps") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: move partitions into partition table nodeAlex Maclean2018-08-04257-6412/+7454
| | | | | | | | Starting with kernel 4.4, the use of partitions as direct subnodes of the mtd device is discouraged and only supported for backward compatiblity reasons. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* ramips: unify partition node names in dts filesMathias Kresin2018-08-043-12/+17
| | | | | | | Use partition@ as name for all partition nodes. Add a label where necessary. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix whitespace and comment issues in dtsMathias Kresin2018-08-0428-86/+82
| | | | | | | | Fix space vs. tabs issue and trainling whitespaces. Use C style comments or drop the comments if they explain what is already to see in the devicetree parameters. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix dtc warningsMathias Kresin2018-08-04232-492/+27
| | | | | | Fix individual boards dtc warnings or obvious mistakes. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix hnat dtc warningMathias Kresin2018-08-041-11/+11
| | | | | | | | | | The hardware NAT node has the same reg/unit as the ethernet node. One of them need to be a child of the other. Make the hardware NAT node a child of the ethernet node since the it "reference" the netdev in its properties. Signed-off-by: Mathias Kresin <dev@kresin.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 11:41:35 +0000