aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ath79: remove bs-partition ro-flag for UniFi AC devicesChristoph Krapp2018-07-041-1/+0
| | | | | | | | | | | | This removes the read-only flag from the bs (bootselect) partition on UniFi AC devices. This allows to correct the indicator from which partition the device is booting its kernel from. See also: - freifunk-gluon/gluon#1301 - https://bugs.lede-project.org/index.php?do=details&task_id=662 Signed-off-by: Christoph Krapp <achterin@googlemail.com>
* ath79: swap TP-Link Archer C7 v2 USB port LED and GPIO namesAleksandr V. Piskunov2018-07-041-6/+6
| | | | | | | | | TP-Link Archer C7 v2 USB port LED and GPIO names are in incorrect order, i.e. in order to match actual user visible labels, usb1 should be usb2, and vice versa. This patch swaps LED and GPIO power control node names. Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com>
* ath79: drop mv88e6063 switch driverMathias Kresin2018-07-041-289/+0
| | | | | | | | Due do a missing KCONFIG isn't selectable nor enabled in the target kernel config. Drop it for now and enable/add the driver at the time it is required. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: fix numbering for Netgear R7800 LAN portsAleksandr V. Piskunov2018-07-041-5/+5
| | | | | | | | | | Netgear R7800 switch LAN ports are numbered backwards in LuCI, i.e. numbering is not corresponding to the actual physical port labels, patch fixes that. Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com> [merged with existing board using the same config] Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ramips: add support for TL-WA801ND v5Romain MARIADASSOU2018-07-046-0/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - System-On-Chip: MediaTek MT7628NN - CPU/Speed: 580 MHz - Flash-Chip: ELM Technology GD25Q64 - Flash size: 8192 KiB - RAM: 64 MiB - Wireless No1: SoC-integrated: MT7628N 2.4GHz 802.11bgn Currently the only method to install openwrt for the first time is via TFTP recovery. After first install you can use regular updates. Flash instructions: 1) To flash the recovery image, start a TFTP server with IP address 192.168.0.66 and serve the recovery image named tp_recovery.bin. 2) Connect your device to the LAN port, then press the WPS and Reset button and power it up. Keep pressing the WPS/Reset button for 10 seconds or until the lock LED is lighting up. It will try to download the recovery image and flash it. It can take up to 2-3 minutes to finish. When it reaches 100%, the router will reboot itself. Signed-off-by: Romain MARIADASSOU <roms2000@free.fr>
* ramips: add support for ZyXEL Keenetic Extra IIMaxim Anisimov2018-07-046-2/+228
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - System-On-Chip: MT7628N/N - CPU/Speed: 580 MHz - Flash-Chip: Winbond w25q256 - Flash size: 32768 KiB - RAM: 128 MiB - 5x 10/100 Mbps Ethernet - 4x external, non-detachable antennas - UART (J1) header on PCB (57600 8n1) - Wireless No1 (2T2R): SoC-integrated: MT7628N 2.4GHz 802.11bgn - Wireless No2 (2T2R): On-board chip: MT7612EN 5GHz 802.11ac - USB: Yes 1 x 2.0 - 4x LED, 3x button The device supports dual boot mode. So we use only first half of flash. Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-ramips-mt76x8-zyxel_keenetic-extra-ii-squashfs-factory.bin" to "kextra2_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed until power led start blinking. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
* ramips: move zyimage define to common MakefileMaxim Anisimov2018-07-042-4/+4
| | | | Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
* ramips: add support for MikroTik RouterBOARD RBM11gTobias Schramm2018-07-046-1/+157
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the MikroTik RouterBOARD RBM11g. =Hardware= The RBM11g is a mt7621 based device featuring one GbE port and one miniPCIe slot with a sim card socket and USB 2.0. ==Switch== The single onboard Ethernet port is connected the CPU directly. The internal switch of the mt7621 SoC is disabled. ==Flash== The device has one spi nor flash chip. It is a 128 Mbit winbond 25Q128FVS connected to CS0. ==PCIe== The board features a single miniPCIe slot. It has a dedicated mini SIM socket and a USB 2.0 port. Power to the miniPCIe slot is controlled via GPIO9. ==USB== There are no external USB ports. ==Power== The board can accept both, passive PoE and external power via a 2.1 mm barrel jack (center-positive). The input voltage range is 11-32 V. ==Serial port== The device does have an onboard UART on an unpopulated header next to the flash chip: GND: pin 2 TX: pin 7 RX: pin 6 Settings: 115200, 8N1 See below illustration for positioning of the header. 0 = screw hole * = some pin T = TX pin R = RX pin G = GND pin Pinout: +--------------- |O | __ | / \ | \__/ | | | | +---+ | |RAM| | +--+ | | | |**| <- unpopulated header with UART | |*T| +---+ | |R*| +--------+ | |**| | | | |G*| | CPU | | +--+ | | | +--+ | | | | | +--------+ | +--+ <- flash chip |O | +-----+ | | | |+--+ | | || | | | +--------------------- =Installation= To install an OpenWRT image to the device two components must be built: 1. A openwrt initramfs image 2. A openwrt sysupgrade image ===initramfs & sysupgrade image=== Select target devices "Mikrotik RBM11G" in openwrt menuconfig and build the images. This will create the images "openwrt-ramips-mt7621-mikrotik_rbm11g-initramfs-kernel.bin" and "openwrt-ramips-mt7621-mikrotik_rbm11g-squashfs-sysupgrade.bin" in the output directory. ==Installing== **Make sure to back up your RouterOS license in case you do ever want to go back to RouterOS using "/system license output" and back up the created license file.** When rebooted the board will try booting via ethernet first. If your board does not boot via ethernet automatically you will have to attach to the serial port and set ethernet as boot device within RouterBOOT. 1. Set up a dhcp server that points the bootfile to tftp server serving the "openwrt-ramips-mt7621-mikrotik_rbm11g-initramfs-kernel.bin" initramfs image 2. Connect to ethernet port on board 3. Power on the board 4. Wait for OpenWrt to boot Right now OpenWrt will be running with a SSH server listening. Now OpenWrt must be flashed to the devices flash: 1. Copy "openwrt-ramips-mt7621-mikrotik_rbm11g-squashfs-sysupgrade.bin" to the device using scp. 2. Write openwrt to flash using "sysupgrade openwrt-ramips-mt7621-mikrotik_rbm11g-squashfs-sysupgrade.bin" Once the flashing completes the board will reboot. Disconnect from the devices ethernet port or stop the DHCP/TFTP server to prevent the device from booting via ethernet again. The device should now boot straight to OpenWrt. Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
* lantiq: enlarge AVM Fritz!Box 3370 flashMichael Kuron2018-07-042-36/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Increase the available flash memory size in AVM Fritz!Box 3370 by incorporating the unused extra partitions located after the ubi partition. Note that users upgrading from a previous OpenWRT version need to re-install from the boot loader to pick up the new partition layout. Available flash space for rootfs+overlay increases from 48MB to 124MB. Reverting to the OEM firmware is still possible (via the recovery utility provided by AVM) as the OEM firmware appears to reformat the config and nand-filesystem partitions upon first boot if necessary. The reserved-kernel and reserved-filesystem partitions are overwritten by the OEM firmware when installing an update, so their contents do not matter. Boot loader and device-specific information (MAC addresses, calibration data, etc.) are not located in NAND flash and remain unharmed by this changed. Tested with OEM firmware 06.54 on device with HWRevision 5 and Micron flash chip. Signed-off-by: Michael Kuron <m.kuron@gmx.de>
* lantiq: backport stp-xway get callback implementationMathias Kresin2018-07-041-0/+47
| | | | | | | | | | | To keep the status of a LED connected to the stp during boot, the get callback is required. If the callback is missing and the LED default state is set to keep in the devicetree, the gpio led driver errors out during load. Fixes: FS#1620 Signed-off-by: Mathias Kresin <dev@kresin.me>
* firmware-utils: tplink-safeloader: add calloc error handlingHyeonsik Song2018-07-041-0/+4
| | | | Signed-off-by: Hyeonsik Song <blogcin@naver.com>
* kernel: fix AT8032 PHY phy id maskMathias Kresin2018-07-043-13/+16
| | | | | | | | | | | | Don't mask bit 4 of the AT8022 phy id. If bit 4 of the AT8022 phy id (0x004dd023) is masked, it will match the phy id of the AR8327 switch (0x004dd033) as well. It results in applied at803x driver settings/callbacks, which will at least limit the AR8327 phys to 100MBit operation instead of the possible 1000MBit. Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: ASLR hardening use $(FPIC)Kevin Darbyshire-Bryant2018-07-031-1/+1
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* toolchain: gdb: enable TUIKevin Darbyshire-Bryant2018-07-031-1/+1
| | | | | | | | | | | The GDB Text User Interface (TUI) is a terminal interface which uses the curses library to show the source file, the assembly output, the program registers and GDB commands in separate text windows. In other words it's a friendlier interface for idiots like me! Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: bump to latest patches on 2.80rc2Kevin Darbyshire-Bryant2018-07-0319-11/+406
| | | | | | | | | | | | | | | Refresh patches and backport upstream to current HEAD: a997ca0 Fix sometimes missing DNSSEC RRs when DNSSEC validation not enabled. 51e4eee Fix address-dependent domains for IPv6. 05ff659 Fix stupid infinite loop introduced by preceding commit. db0f488 Handle some corner cases in RA contructed interfaces with addresses changing interface. 7dcca6c Warn about the impact of cache-size on performance. 090856c Allow zone transfer in authoritative mode whenever auth-peer is specified. cc5cc8f Sane error message when pcap file header is wrong. c488b68 Handle standard and contructed dhcp-ranges on the same interface. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kmod-sched-cake: bump to latest cakeKevin Darbyshire-Bryant2018-07-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bumps to the latest & possibly greatest cake, sadly it's still inedible but from an SQM point of view quite tasty :-) Main tweaks since previous bump, improved ack_filter, some extra stats, support for 64bit netlink parameters (higher rates/byte counters) 0520a6c Fix NAT option handling 8da93e1 Make sure we always call qdisc_watchdog_init() in cake_init() f65daf6 Fix mismatched parenthesis 51d4ab3 Change flag handling to be safe even when mixing with non-eligible ACKs f2ea091 ack_filter: protect DCTCP with stricter filtering of ECE marks 28b4560 ACK filter: Handle wrapping sequence numbers and DSACKs 73f62d9 Use the right PAD attribute for options 5969c14 Use 32 for tin backlog e289f31 Move all the u64 netlink attributes together 36180a0 Check ACK seqno before parsing SACKs 91bbc01 Merge branch 'mine' into cobalt 58c55ec Rework SACK check to compare the ranges of two SACKs 9a5d593 ack_filter: Add proper handling of SACKs eca95d4 ack_filter: short-circuit TCP flag check d50a246 compat: backport some ktime functions 7b7ad11 compat: define tcpopt_fastopen for pre-4.1 kernels ca54cdb Fix ktime compare 9d7dcc0 ack filter: Parse TCP options and only drop safe ones b119882 Return EOPNOTSUPP on NAT option if conntrack is not available 842d7f0 Don't try to pad stats with tin_stats padding bd46dc2 Use 64-bit divide helper 8e41bf0 Make sure we never drop SACKs when filtering ACKs 66e5d60 Avoid comparing ktime_t to scalar values 7fab017 Actually commit the ktime_t changes fca6d13 Switch to ktime_t and get rid of cobalt.h 6f7e5af Can't use do_div with 64-bit divisors Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* iproute2: tc: update support for cakeKevin Darbyshire-Bryant2018-07-031-28/+83
| | | | | | | | | Bump iproute2/tc support of cake. Add support for cake's change to u64 attribute passing for certain attributes (rate & byte counts) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: gen_stats: Fix netlink stats dumping in the presence of paddingKevin Darbyshire-Bryant2018-07-032-0/+98
| | | | | | | | | | | | | | | | | | | | | | | | Backport hot off the press upstream netlink patch. Fixes stats display from CAKE qdisc on MIPS allowing us to bump CAKE to latest version. The gen_stats facility will add a header for the toplevel nlattr of type TCA_STATS2 that contains all stats added by qdisc callbacks. A reference to this header is stored in the gnet_dump struct, and when all the per-qdisc callbacks have finished adding their stats, the length of the containing header will be adjusted to the right value. However, on architectures that need padding (i.e., that don't set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), the padding nlattr is added before the stats, which means that the stored pointer will point to the padding, and so when the header is fixed up, the result is just a very big padding nlattr. Because most qdiscs also supply the legacy TCA_STATS struct, this problem has been mostly invisible, but we exposed it with the netlink attribute-based statistics in CAKE. Fix the issue by fixing up the stored pointer if it points to a padding nlattr. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ramips: limit dictionary size for lzma compressionFelix Fietkau2018-07-031-1/+1
| | | | | | | | | | | | In some cases, recent builds fail to boot from flash with at least some MT7621 based devices. The error message is: "LZMA ERROR 1 - must RESET board to recover" Booting the same kernel via TFTP works for some reason. Through testing I figured out that limiting the LZMA dictionary size seems to prevent these errors Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uhttpd: update to latest Git headJo-Philipp Wich2018-07-031-3/+3
| | | | | | | | | | db86175 lua: honour size argument in recv() function d3b9560 utils: add uh_htmlescape() helper 8109b95 file: escape strings in HTML output 393b59e proc: expose HTTP Origin header in process environment 796d42b client: flush buffered SSL output when tearing down client ustream Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ebtables: update to latest git 2018-06-27Hans Dedecker2018-07-023-5/+5
| | | | | | | 48cff25 build: drop install -o/-g root 53d7e7a extensions: ebt_string: take action if snprintf discards data Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* toolchain/glibc: update to latest 2.26 commitHans Dedecker2018-07-021-2/+2
| | | | | | | | | 74d16a57a3 Check length of ifname before copying it into to ifreq structure. 3aaf8bda00 getifaddrs: Don't return ifa entries with NULL names [BZ #21812] f958b45d52 Use _STRUCT_TIMESPEC as guard in <bits/types/struct_timespec.h> [BZ #23349] 81b994bd83 Fix parameter type in C++ version of iseqsig (bug 23171) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* build: fix target metadata scan dependenciesFelix Fietkau2018-07-023-4/+10
| | | | | | | Move SCAN_DEPS to scan.mk to eliminate redundancy with scripts/feeds Add image/*.mk to SCAN_DEPS for targets to pick up newly added devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: ensure that iwinfo is selected when building for multiple devicesFelix Fietkau2018-07-021-0/+1
| | | | | | | extra_packages needs to be added there, like on profiles and target packages lists Signed-off-by: Felix Fietkau <nbd@nbd.name>
* fw3: update to latest git HEADJohn Crispin2018-07-021-3/+3
| | | | | | 72684e5 firewall3: Fix GCC8 warnings by replacing sprintf with snprintf Signed-off-by: John Crispin <john@phrozen.org>
* zynq: remove config options handled by genericLuis Araneda2018-07-021-7/+0
| | | | | | | The options are now handled for all targets by the generic configuration Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* samba36: Disable external libtdb and libteventRosen Penev2018-07-021-1/+3
| | | | | | | This was causing issues recently as samba36 is not API compatible with the libtdb in the packages repo. It shouldn't be using it anyway. Nor tevent. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* usbutils: Switch to Fedora usbutilsRosen Penev2018-07-021-5/+5
| | | | | | | The Gentoo GitHub mirror went down. One benefit of Fedora's usb.ids file is that it's versioned. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: add support for TP-Link RE450 v2Peter Lundkvist2018-07-027-1/+263
| | | | | | | | | | | | | | | | | | | | | | | | TP-Link RE450 v2 is a dual band router/range-extender based on Qualcomm/Atheros QCA9563 + QCA9880. Specification: - 775 MHz CPU - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 1x 10/100/1000 Mbps Ethernet (AR8033 PHY) - 7x LED, 4x button - UART header on PCB (needs unmounted R64 & R69 0201 resistors/jumpers) Flash instruction: Apply factory image in OEM firmware web-gui. U-Boot does not seem to have any recovery functions, so debricking requires connection via UART. Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com>
* kernel: bump 4.14 to 4.14.52Koen Vandeputte2018-07-0210-58/+30
| | | | | | | | | Refreshed all patches Compile-tested on: cns3xxx, imx6, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.110Koen Vandeputte2018-07-025-18/+18
| | | | | | | | | Refreshed all patches Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4Rocco Folino2018-07-026-0/+224
| | | | | | | | | | This patch ports the TP-Link TL-WR741ND v4 and TL-WR740ND v4 to the ath79 target. Because the two devices share the same hw layout, this patch adds a common .dtsi which is included by the two .dts. Signed-off-by: Rocco Folino <rocco@folino.io>
* ath79: add pinmux to ar9330Rocco Folino2018-07-021-0/+18
| | | | | | | This patch adds the pinmux support to the ar9330 used to disable the JTAG or to enable switch LEDs Signed-off-by: Rocco Folino <rocco@folino.io>
* ramips: fix wizfi630a swapped lan/wan portLev2018-07-021-1/+1
| | | | | | | The order of the Ethernet ports were mixed up. This commit fixes the order to be aligned with the physical layout. Signed-off-by: Lev <leventelist@gmail.com>
* download.mk: restore the old dl_method implementationYousong Zhou2018-06-291-1/+17
| | | | | | | | Seems like the python download.py dl_method call causes serious performance regression for fresh "make defconfig" as reported in FS#1621. GitHub tarball download will also be disabled with this Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* swconfig: swlib_map_settings(): change return type to voidAlexander Couzens2018-06-291-1/+1
| | | | | | | | The return value of the function isn't used anywhere. Fixes missing return value, CID 1329717. Found-by: Coverity Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* swconfig: fix un-initialized return valueAlexander Couzens2018-06-291-2/+3
| | | | | | | Fix CID 1330844 Found-by: Coverity Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ath79: add support for Unifi AC MeshAdrian Schmutzler2018-06-286-19/+40
| | | | | | | | | The Unifi AC Mesh is equivalent to the Unifi AC Lite. However, for setting certain parameters with the flashed device it is helpful that the devices know their variant (e.g. automatically setting antenna gain for the different antennas in Lite and Mesh). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for more AR7241 TP-Link boardsDmytro Smyrnov2018-06-288-0/+266
| | | | | | | | | | | Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath79: small wr1043nd-v4 fixesLucian Cristian2018-06-284-23/+36
| | | | | | | | | | | | | | | - fix sysupgrade check - move usb to v4 dts because v5 doesn't have it - make wan mac address behave like ar71xx target - add orange wan led support, it can be userspace activated like: on: echo default-on > /sys/class/leds/tp-link\:orange\:wan/trigger off: echo none > /sys/class/leds/tp-link\:orange\:wan/trigger Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* ath79: add support for Ubiquiti UniFi AC-ProLucian Cristian2018-06-286-126/+178
| | | | | | | | rework the dts to a common unifi-ac dtsi pro network is connected via phy0 and has usb ports lite network is connected via phy4 without usb ports Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* ath79: sync naming of Ubiquiti devicesAdrian Schmutzler2018-06-284-7/+8
| | | | | | | Use a Unifi AC Lite board-/image name consistent with other Ubiquiti devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: Remove all memory nodes defined in dtsChuanhong Guo2018-06-2824-120/+0
| | | | | | | This target can automatically detect the correct memory size and we've been using it for long in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* treewide: gpio-export: add error handlingMathias Kresin2018-06-283-3/+9
| | | | | | | | Check if the GPIO is valid (or set at all). If no GPIO is set in the devicetree, a gpiolib related kernel warning + stacktrace is shown during boot and gpio-export reports GPIOs as exported albeit none really is. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: drop gpio export patchMathias Kresin2018-06-281-166/+0
| | | | | | The hack isn't used by any board. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: switch the NBG6817 wlan LEDs from amber to whiteStefan Lippers-Hollmann2018-06-281-2/+0
| | | | | | | | | | | | | | | | | The original device support patch configured the amber wlan LEDs (which are meant as error indicator by the OEM) controlled by the SOC's GPIO as wlan traffic indicators, as the correct white wlan LEDs are connected to GPIOs controlled by the QCA9984/ ath10k wlan cards were not accessible. The recent addition of GPIO/ LED support to ath10k now makes it possible to use the correct white LEDs instead - and "mac80211: ath10k: use tpt LED trigger by default" also enables them by default. While both LEDs are independent of each other (two separate LEDs sharing one light tunnel), triggering both on wlan traffic is not the intended behaviour (bright yellow light). Tested on the ZyXEL NBG6817. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ramips: move mt7620n i2c_pins definition to right placeAndrey Jr. Melnikov2018-06-281-7/+7
| | | | | | | | | | Move to i2c pins pinmux node to the pinctrl node. Fixes: a0685deec458 ("ramips: Add i2c support for mt7620n") Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> [fix commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* qos-scripts: fix uci callback handlingTony Ambardar2018-06-283-29/+29
| | | | | | | | | | | | | | | | | The previous callback code was fragile, dependent on some UCI callback bugs and side-effects now fixed in master commit 73d8a6ab. Update scripts to use callbacks where appropriate and necessary, while using normal UCI config parsing for all else. This results in smaller, simpler, more robust code. Use callbacks in generate.sh to only process 'interface' defaults and the varying entries for 'reclassify', 'default' and 'classify' sections. Also switch qos-stat to use non-callback UCI handling. The current changes work independently of 73d8a6ab (i.e. both before and after), and are consistent with UCI config parsing documentation. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq806x: remove "firmware" partition definition from netgear routersHannu Nyman2018-06-274-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the "firmware" partition definition from the DTS of R7800 to fix sysupgrade. Commit 4645a6d3 defined CONFIG_MTD_SPLIT_UIMAGE_FW=y for ipq806x and that causes mtd to misbehave as additional kernel and ubi partitions are detected from inside the "firmware" partition. [ 1.111324] 0x000001480000-0x000001880000 : "kernel" [ 1.121005] 0x000001880000-0x000007900000 : "ubi" [ 1.283912] 0x000007900000-0x000008000000 : "reserve" [ 1.296407] 0x000001480000-0x000007900000 : "firmware" [ 1.468043] no rootfs found after FIT image in "firmware" [ 2.426860] 2 uimage-fw partitions found on MTD device firmware [ 2.426931] 0x000001480000-0x000001880000 : "kernel" [ 2.440420] 0x000001880000-0x000007900000 : "ubi" Both kernel and ubi are already defined in DTS, so this duplication leads into errors in sysupgrade: Writing from <stdin> to kernel ... ubiattach: error!: strtoul: unable to parse the number '6 mtd10' ubiattach: error!: bad MTD device number: "6 mtd10" The partition is defined to same area as kernel+ubi, and is not needed for sysupgrade anymore. Remove it to fix things. Only tested for the R7800 but all of them should behave equal. Fixes: FS#1617 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> [squashed commits, add "tested on" note] Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: include package directory in sha256sums when running on buildbotJo-Philipp Wich2018-06-272-2/+3
| | | | | | | | | | In order to be able to better compare files to sync in the future, include all BIN_DIR subdirectories in the checksum calculation. To not break existing applications, restrict the recursive checksumming to CONFIG_BUILDBOT for now. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-15 17:27:12 +0000