aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* kernel: bump 4.14 to 4.14.164Koen Vandeputte2020-01-2027-112/+112
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* brcm47xx: fix switch port order for Netgear WN2500RP V1Walter Sonius2020-01-201-0/+5
| | | | | | | | | | | | | The Netgear WN2500RP V1 switch0 already works for LAN however the port order for the LAN ports is inverted. Correct physical port order watched from the back of the device is: 4 / 3 / 2 / 1 WAN port is absent on this device and therefore removed from switch config. Signed-off-by: Walter Sonius <walterav1984@gmail.com> [move block to maintain alphabetic sorting] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: apply LED_POLARITY rt3050-esw on MT7628AN/MT7688Maximilian Pachl2020-01-191-0/+4
| | | | | | | | | | | The device tree property "mediatek,led_polarity" is ignored for MT7628AN and MT7688. According to the datasheet both SoCs have the matching register. Therefore the property should be applied on these two devices as well. Signed-off-by: Maximilian Pachl <m@ximilian.info> Reviewed-by: Sungbo Eo <mans0n@gorani.run> Tested-by: Sungbo Eo <mans0n@gorani.run>
* tools: tplink-safeloader: update soft_ver for TP-Link Archer C6 v2 (EU)Anderson Vulczak2020-01-191-1/+1
| | | | | | | | | | | | | | | | This patch updates "soft_ver" for TP-Link Archer C6 v2 (EU). It makes possible to upload OpenWrt on lastest vendor's firmware as the web-based updater checks for major.minor version during upload. Due to that on next major/minor version update TP-Link will stop us from using the web-based firmware update tool, so it will require a new patch on soft_ver to match major and minor version. Up to today's latest stock firmware the patch (major.minor.patch) version does not matters, that allows downgrade from 1.1.4 to 1.1.1 but do not allow downgrade from 1.1.X to 1.0.X. Signed-off-by: Anderson Vulczak <andi@andi.com.br>
* kirkwood: fix HDD LED labels for Zyxel NSA325 in 01_ledsStephan Knauss2020-01-181-2/+2
| | | | | | | | | Change the LED labels for hdd1/hdd2 in 01_leds to match their counterpart in DTS. Signed-off-by: Stephan Knauss <openwrt@stephans-server.de> [improve commit title and message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm47xx: fix switch port order for Netgear WNR3500 V2Walter Sonius2020-01-181-0/+1
| | | | | | | | | | | The Netgear WNR3500 V2 switch0 already works for WAN/LAN however the port order for the LAN ports is inverted. Correct physical port order watched from the back of the device is: Internet / 4 / 3 / 2 / 1 this resembles the Linksys E3000 V1. Verfied with imagebuilder edit FILES=/etc/board.d/01_network Signed-off-by: Walter Sonius <walterav1984@gmail.com>
* ramips: add support for TP-Link RE305 v1Steffen Förster2020-01-184-0/+211
| | | | | | | | | | | | | | | | | | | | | | Specification: SoC: MediaTek MT7628AN RAM: 64MiB Flash: 8MiB Wifi: - 2.4GHz: MT7628AN - 5GHz: MT7612EN LAN: 1x 10/100 Mbps Flash instructions: Flash factory image through stock firmware WEB UI. Back to stock is possible by using TFTP and stripping down the Firmware provided by TP-Link to a initramfs. The flash space between 0x650000 and 0x7f0000 is blank in the stock firmware so I left it out as well. Signed-off-by: Steffen Förster <nemesis@chemnitz.freifunk.net>
* kernel: remove further obsolete kernel version switchesSungbo Eo2020-01-184-26/+10
| | | | | | | | Most of the kernel version switches below 4.14 were removed in commit 97940f876616 ("kernel: remove obsolete kernel version switches"), but some of them still remained. Remove them now. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ath79: add led_ prefix for Phicomm K2T LED labelAdrian Schmutzler2020-01-181-5/+5
| | | | | | | Using the led_ prefix for the node label is now common in ath79, so also apply it here. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: use rssihigh LED instead of WAN LED for status indicationAdrian Schmutzler2020-01-182-10/+10
| | | | | | | | | | | | Using the LED of network interfaces for status (boot/failsafe/...) indication is somewhat misleading, as the blinking might be mistaken for network activity. This uses rssi LEDs instead, which do not blink normally and thus are less ambiguous. The rssihigh LED has also been used consistently for the TP-Link CPE devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: remove redundant network setupAdrian Schmutzler2020-01-181-4/+0
| | | | | | No need to have specific setup when default case does the same. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* tools/cmake: update to 3.16.2Hannu Nyman2020-01-184-9/+9
| | | | | | | | | Update cmake to 3.16.2 and refresh patches. Release notes: https://cmake.org/cmake/help/v3.16/release/3.16.html Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ramips: rt305x: remove unnecessary mediatek,portmapSungbo Eo2020-01-182-2/+0
| | | | | | | | | "#mediatek,portmap" is not a valid property name. If mediatek,portmap equals 0x0, then the esw driver ditches it and uses the default value, 0x3f. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: mt76x8: fix bogus mediatek,portmapSungbo Eo2020-01-1818-14/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | mt76x8 uses esw_rt3050 driver, which does not accept mediatek,portmap with string values. Convert the strings to integers to make it work. According to its switch setup, WRTnode 2P/2R have a WAN port at port 0, so the correct value should be 0x3e. tplink_8m.dtsi uses "llllw", but it does not match switch setups of any device using the DTSI. Remove it from the DTSI and add correct value to DTS for each device. These devices have a WAN port at port 0. Set the value to 0x3e. - tplink,archer-c20-v4 - tplink,archer-c50-v3 - tplink,tl-mr3420-v5 - tplink,tl-wr840n-v4 - tplink,tl-wr841n-v13 - tplink,tl-wr842n-v5 These devices have only one ethernet port. They don't need portmap setting. - tplink,tl-wa801nd-v5 - tplink,tl-wr802n-v4 - tplink,tl-wr902ac-v3 Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: mt7620/mt7621: remove invalid mediatek,portmapSungbo Eo2020-01-183-5/+3
| | | | | | | | | | mt7620 and mt7621 use mt7530 driver, which only accepts "llllw", "wllll", and "lwlll" values. According to its switch setup, Mi Router 3G v2 has a WAN port at port 4, so the correct value should be "llllw". Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* base-files/functions.sh: use grep -q instead of []Rosen Penev2020-01-181-4/+4
| | | | | | | | | | | | It's cleaner and faster as it does not need to do extra work. Also removed $() to avoid executing the output. The shell can handle it. https://github.com/koalaman/shellcheck/wiki/SC2143 Signed-off-by: Rosen Penev <rosenp@gmail.com> [correct || to && for one conversion] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: fix wps leds/btn for TP-Link TL-WA801ND v5Jan Alexander2020-01-171-4/+16
| | | | | | | | | | - fix color and active mode for existing wps led - add green wps led - add wps button Signed-off-by: Jan Alexander <jan@nalx.net> [wrap line] Signed-off-by: David Bauer <mail@david-bauer.net>
* base-files/system.sh: remove $ in $(())Rosen Penev2020-01-171-1/+1
| | | | | | | | Not needed. https://github.com/koalaman/shellcheck/wiki/Sc2004 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* base-files/functions.sh: use && instead of -aRosen Penev2020-01-171-2/+2
| | | | | | | | -a is not well defined. https://github.com/koalaman/shellcheck/wiki/SC2166 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* base-files/functions.sh: remove useless catRosen Penev2020-01-171-2/+2
| | | | | | | | The cut command can take a file as an input. https://github.com/koalaman/shellcheck/wiki/SC2002 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* base-files/functions.sh: don't use $var in $(())Rosen Penev2020-01-171-3/+3
| | | | | | | | It's not needed. It can also lead to subtle bugs. https://github.com/koalaman/shellcheck/wiki/Sc2004 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libcxx: fix build for x86/64Stijn Tintel2020-01-171-0/+1
| | | | | | | | | | When building libcxx for x86/64, the library is installed in /usr/lib64. As the install section tries to copy the library from /usr/lib, this breaks build on x86/64. Override the lib dir suffix to fix this. Fixes: 856ea2bad3b3 ("libcxx: Add package") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rosen Penev <rosenp@gmail.com>
* odhcpd: update to version 2020-01-14Hans Dedecker2020-01-161-3/+3
| | | | | | | | | 6db312a dhcpv6-ia: use dhcp leasetime to set preferred/valid statefull lifetimes 2520c48 dhcpv6-ia: introduce DHCPv6 pd and ia assignments flags b413d8a dhcpv6-ia: cleanup prefix delegation routes b0902af dhcpv6-ia: remove passing interface as parameter to apply_lease Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ccache: update to 3.7.7DENG Qingfang2020-01-162-3/+3
| | | | | | | | | Update ccache to 3.7.7 Release notes: https://ccache.dev/releasenotes.html#_ccache_3_7_7 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: fix HiWiFi HC5962 status LEDDENG Qingfang2020-01-161-3/+4
| | | | | | | | | Match LED behavior to stock firmware: Red: booting White: running Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: fix HiWiFi HC5962 switch configurationDENG Qingfang2020-01-161-1/+4
| | | | | | HC5962 has only 3 LAN ports, switch port 0 is unused Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* hostapd: add support for system cert bundle validationDavid Lam2020-01-162-6/+15
| | | | | | | | | | | | | | Currently, it is very cumbersome for a user to connect to a WPA-Enterprise based network securely because the RADIUS server's CA certificate must first be extracted from the EAPOL handshake using tcpdump or other methods before it can be pinned using the ca_cert(2) fields. To make this process easier and more secure (combined with changes in openwrt/openwrt#2654), this commit adds support for validating against the built-in CA bundle when the ca-bundle package is installed. Related LuCI changes in openwrt/luci#3513. Signed-off-by: David Lam <david@thedavid.net> [bump PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: cleanup IBSS-RSNDaniel Golle2020-01-162-6/+2
| | | | | | set noscan also for IBSS and remove redundant/obsolete variable. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: ar934x: use reset for usb-phy-analogJohann Neuhauser2020-01-151-2/+2
| | | | | | | | | | | | This was already available on ar71xx, but is missing on ath79. This solves the slow usb speed on TP-Link WDR3600/WDR4300 and similar, as reported in Flyspray [0], OpenWRT Forum [1] and GitHub PR [2]. [0] https://bugs.openwrt.org/index.php?do=details&task_id=2567 [1] https://forum.openwrt.org/t/usb-wdr4300-low-speed-on-external-storage/46794 [2] https://github.com/openwrt/openwrt/pull/964 Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
* ath79: phy-ar7200-usb: adapt old behavior of arch/mips/ath79/dev-usb.cJohann Neuhauser2020-01-151-6/+18
| | | | | | | | | | | | Do not put usb-phy into reset if clearing the usb-phy reset or setting the suspend_override has failed. Reorder (de)asserts like in arch/mips/ath79/dev-usb.c. Add an optional reset_control "usb-phy-analog", which is needed for ar934x SoCs like in the old mach-driver arch/mips/ath79/dev-usb.c. Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
* ar71xx/mikrotik: use ath10k-ct-smallbuffers for 64 MiB devicesThomas Nixon2020-01-151-1/+1
| | | | | | | | | | This image is only needed on one device (wAP AC); since this target is going to be removed anyway it doesn't make sense to add an extra "low RAM" image. Fixes OOM issues on RouterBoard wAP AC. Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
* uboot-oxnas: fix memory leak in tool mkox820crcAndrea Dalla Costa2020-01-151-0/+3
| | | | | | | | In function `main` add calls to `free` for the variable `executable`. This is needed because the variable `executable` is allocated but never freed. This cause a memory leak. Signed-off-by: Andrea Dalla Costa <andrea@dallacosta.me>
* ath79: use caldata partition label consistentlyAdrian Schmutzler2020-01-152-8/+8
| | | | | | | Change the caldata partition DTS node label to be consistent with the label property for some Netgear WNDR devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* malta: enable HighMem on MIPS32Aleksander Jan Bajkowski2020-01-152-0/+2
| | | | | | It allows to use more than 256MB memory on MIPS32. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* dropbear: fix compile errorJohn Crispin2020-01-151-1/+2
| | | | | Fixes: 0da193ee6943 ("dropbear: move failsafe code out of base-files") Signed-off-by: John Crispin <john@phrozen.org>
* wireguard: skip peer config if public key of the peer is not definedFlorian Eckert2020-01-151-0/+5
| | | | | | | | | | | | | | | If a config section of a peer does not have a public key defined, the whole interface does not start. The following log is shown daemon.notice netifd: test (21071): Line unrecognized: `PublicKey=' daemon.notice netifd: test (21071): Configuration parsing erro The command 'wg show' does only show the interface name. With this change we skip the peer for this interface and emit a log message. So the other peers get configured. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* busybox: fix build issuesJohn Crispin2020-01-151-1/+3
| | | | | Fixes: f704f97e4c57 ("busybox: Include hdparm by default on nas type device") Signed-off-by: John Crispin <john@phrozen.org>
* ath79: add support for Netgear WNDR4500 v3Michal Cieslakiewicz2020-01-156-5/+63
| | | | | | | | | | | | | | | | | | | This patch introduces support for Netgear WNDR4500v3. Router is very similar to WNDR4300v2 and is based on the same PCB. Information gathered from various Internet sources (including https://patchwork.ozlabs.org/patch/809227/) shows following differences to WNDR4300v2: * two USB 2.0 ports with separate LEDs * USB LEDs soldered to secondary pads * WPS and RFKILL buttons soldered to secondary pads * described as N900 device with 3x3:3 MIMO for 2.4GHz radio * power supply requirement is DC 12V 2.5A * vendor HW ID suffix differs in one digit * bigger chassis Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* ath79: add support for Netgear WNDR4300 v2Michal Cieslakiewicz2020-01-157-5/+297
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces support for Netgear WNDR4300v2. Specification ============= * Description: Netgear WNDR4300 v2 * Loader: U-boot * SOC: Qualcomm Atheros QCA9563 (775 MHz) * RAM: 128 MiB * Flash: 2 MiB SPI-NOR + 128 MiB SPI-NAND - NOR: U-boot binary: 256 KiB - NOR: U-boot environment: 64 KiB - NOR: ART Backup: 64 KiB - NOR: Config: 64 KiB - NOR: Traffic Meter: 64 KiB - NOR: POT: 64 KiB - NOR: Reserved: 1408 KiB - NOR: ART: 64 KiB - NAND: Firmware: 25600 KiB (see notes for OpenWrt) - NAND: Language: 2048 KiB - NAND: mtdoops Crash Dump: 128 KiB - NAND: Reserved: 103296 KiB * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) (AR8337) * Wireless: - 2.4 GHz b/g/n (internal) - 5 GHz a/n (AR9580) * USB: yes, 1 x USB 2.0 * Buttons: - Reset - WiFi (rfkill) - WPS * LEDs: - Power (amber/green) - WAN (amber/green) - WLAN 2G (green) - WLAN 5G (blue) - 4 x LAN (amber/green) - USB (green) - WPS (green) * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1 * Power supply: DC 12V 1.5A * MAC addresses: LAN=WLAN2G on case label, WAN +1, WLAN5G +2 Important Notes =============== 0. NOR Flash (2 MiB) is not touched by OpenWrt installation. 1. NAND Flash (128 MiB) layout under OpenWrt is changed as follows: all space is split between 4 MiB kernel and 124 MiB UBI areas; vendor partitions (language and mtdoops) are removed; kernel space size can be further expanded if needed; maximum image size is set to 25600k for compatibility reasons and can also be increased. 2. CPU clock is 775 MHz, not 750 MHz. 3. 5 GHz wireless radio chip is Atheros AR9580-AR1A with bogus PCI device ID 0xabcd. For ath9k driver to load successfully, this is overriden in DTS with correct value for this chip, 0x0033. 4. RFKILL button is wired to AR9580 pin 9 which is normally disabled by chip definition in ath9k code (0x0000F4FF gpio mask). Therefore 'qca,gpio-mask=<0xf6ff>' hack must be used for button to work properly. 5. USB port is always on, no GPIO for 5V power control has been identified. Installation ============ * TFTP recovery * TFTP via U-boot prompt * sysupgrade * Web interface Test build configuration ======================== CONFIG_TARGET_ath79=y CONFIG_TARGET_ath79_nand=y CONFIG_TARGET_ath79_nand_DEVICE_netgear_wndr4300-v2=y CONFIG_ALL_KMODS=y CONFIG_DEVEL=y CONFIG_CCACHE=y CONFIG_COLLECT_KERNEL_DEBUG=y CONFIG_IMAGEOPT=y Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* ath79: WNDR4300: increase kernel partition to 4MMichal Cieslakiewicz2020-01-152-6/+6
| | | | | | | | | Increase kernel partition from 2 MiB to 4 MiB for Netgear WNDR routers with NAND flash. Change affects following devices: * Netgear WNDR3700 v4 * Netgear WNDR4300 Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* mac80211: ath9k: add GPIO mask dts propertyMichal Cieslakiewicz2020-01-151-0/+25
| | | | | | | | | | | | | | | This patch adds 'qca,gpio-mask=<u32>' device tree property to ath9k node. This optional setting is a hack and should only be used in very special (and rare) cases when a button or LED is wired to a GPIO pin normally masked out (due to being one-way etc). Netgear WNDR4300 v2 is one such example - it uses GPI9 for RFKILL. See ath9k/reg.h *_GPIO_MASK constants. Use with caution and expect to see stream of kernel warnings if wrong mask value is provided. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* zram-swap: support swap priorityMaxim Storchak2020-01-152-2/+4
| | | | | | | | If zram-backed swap is added after an existing swap, it gets a lower priority. Assiming that usually all other swaps are slower, there should be a way to assign a higher priority to zram swap. Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
* ath79: add support for D-Link DIR-505David Bauer2020-01-154-0/+164
| | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the D-Link DIR-505, previously supported in ar71xx. Hardware -------- SoC: Atheros AR9330 FLASH: 8M SPI-NOR RAM: 64M WIFI: 1T1R 1SS Atheros AR9330 LED: Power green, Status red BTN: WPS, Reset Installation ------------ Currently, installation is only possible by sysupgrading from an earlier OpenWrt version, U-Boot TFTP or a modded U-Boot. I do not have the original bootloader from D-Link on my device anymore, so i cannot test the factory image. Signed-off-by: David Bauer <mail@david-bauer.net>
* perf: Add libunwind only if selectedRosen Penev2020-01-151-2/+2
| | | | | | | | | The depends are totally wrong. libunwind does not work with powerpc and i386 as it needs glibc. Instead of duplicating the platforms, just change the dependency. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* uhttpd: add enable instance optionFlorian Eckert2020-01-152-1/+5
| | | | | | | | With this change it is now possible to switch off single instances of the uhttpd config. Until now it was only possible to switch all instances of uhttpd on or off. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* hostapd: add wpa_strict_rekey supportKyle Copperfield2020-01-151-1/+3
| | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Rekey GTK on STA disassociate Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me>
* hostapd: add dtim_period, local_pwr_constraint, spectrum_mgmt_requiredKyle Copperfield2020-01-152-3/+12
| | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Allows dtim_period to be configurable, the default is from hostapd. Adds additional regulatory tunables for power constraint and spectrum managment. Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me>
* ath79: GL-AR750S (NOR/NAND): limit factory.img kernel size to 2 MBJeff Kletsky2020-01-151-1/+4
| | | | | | | | | | | | | | | | The present U-Boot for GL-AR750S has a limit of 2 MB for kernel size. While sysupgrade can manage kernels up to the present limit of 4 MB, directly flashing a factory.img with a kernel size greater than 2 MB through U-Boot will result in an unbootable device. This commit uses the newly-introduced check-kernel-size build operation to prevent the output of factory.img when the kernel exceeds 2 MB in size, yet permits output of sysupgrade.img as long as the kernel is within KERNEL_SIZE := 4096k Cc: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
* build: define check-kernel-size to remove unflashable imagesJeff Kletsky2020-01-151-0/+7
| | | | | | | | | | | | | | | | | | | | | Certain boards have limitations on U-Boot that prevent flashing of images where the kernel size exceeds a threshold, yet sysupgrade can sucessfully manage larger kernels. The current check-size will remove the target artifact if its total size exceeds the threshold. If applied after append-kernel, it will remove the kernel, but the remaining image-assembly steps will continue, resulting in an image without a kernel that is likely unbootable. By defining check-kernel-size, it is now possible to prevent release of such unbootable images through a construct similar to: IMAGE/factory.img := append-kernel | pad-to $$$$(GL_UBOOT_UBI_OFFSET) | \ append-ubi | check-kernel-size $$$$(GL_UBOOT_UBI_OFFSET) Cc: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
* dropbear: move failsafe code out of base-filesKyle Copperfield2020-01-154-8/+11
| | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Failsafe code of dropbear should be in the dropbear package not the base-files package. Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 16:23:36 +0000