aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* toolchain/gdb: fix expat locationRosen Penev2022-09-271-1/+1
| | | | | | | GDB is not finding tools/expat. This fixes it. Move it up with the other tools. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain/gcc: use zstd from toolsRosen Penev2022-09-271-0/+1
| | | | | | pkgconfig is not used for some reason. Match other used tools. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* build: fix issues with targets installed via feedsFelix Fietkau2022-09-273-5/+6
| | | | | | | - fix including modules.mk when a target is being replaced - fix calling make targets from target/linux Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/download.pl: fix support for aria2c download tool on macosChristian Marangi2022-09-261-6/+8
| | | | | | | | | Currently we use /dev/shm to place aria2c tmp file. This is not present on macos. Use the openwrt tmp directory instead of the linux-only /dev/shm to save compatibility with more os. Fixes: d39123626931 ("download.pl: add aria2c support") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* scripts/download.pl: fix mirrors regression for curl and wgetChristian Marangi2022-09-261-1/+1
| | | | | | | | | With the introduction of aria2c support, curl and wget no longer try to download the file from mirrors. Fix this regression by emptying the remaining mirrors list only when aria2c is used. Fixes: d39123626931 ("download.pl: add aria2c support") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* nftables: backport fix to interval based rulesKevin Darbyshire-Bryant2022-09-262-1/+24
| | | | | | | | | 'rule inet dscpclassify dscp_match meta l4proto { udp } th dport { 3478 } th sport { 3478-3497, 16384-16387 } goto ct_set_ef' works with 'nft add', but not 'nft insert', the latter yields: "BUG: unhandled op 4". Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* sysfsutils: Define START early in fileKevin Darbyshire-Bryant2022-09-262-2/+3
| | | | | | | | | | The luci ucode rewrite exposed the definition of START as being over 1K from start of file. Initial versions limited the search for START & STOP to within the 1st 1K of a file. Whilst the search has been expanded, it doesn't do any harm to define START early in the file like all other init scripts seen so far. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* Revert "mt76: fix compilation error with mt7915 and kernel >= 5.15.61"Christian Marangi2022-09-251-38/+0
| | | | | | | | | | | This reverts commit 6e9613844ca1ddea7e36abc44a513c89ef0598ff. The patch was wrong in the first place as we base everything on backports package and the compilation error was caused by an ath11k present downstream. (will be needed later when backports package will be updated but not now) Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* realtek: fix RTL839x egress tag for ports >= 32Jan Hoffmann2022-09-251-1/+1
| | | | | | | Don't overwrite AS_DPM and L2LEARNING flags when dest_port is >= 32. Fixes: 1773264a0c6d ("realtek: correct egress frame port verification") Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* mt76: fix compilation error with mt7915 and kernel >= 5.15.61Christian Marangi2022-09-251-0/+38
| | | | | | | | With kernel 5.15.61 the define IEEE80211_MAX_AMPDU_BUF got changed to IEEE80211_MAX_AMPDU_BUF_HE. Add patch to fix compilation error on next 5.15 kernel versions. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* scripts/download.pl: fix whitespace in mirror urls and drop forChristian Marangi2022-09-251-7/+2
| | | | | | | Fix whitespace in mirror urls and replace for loop with join+map logic. Fixes: d39123626931 ("download.pl: add aria2c support") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* wolfssl: prefer regular libwolfssl over cpu-cryptoEneas U de Queiroz2022-09-253-16/+16
| | | | | | | | | | | | | | | | | Rename libwolfssl-cpu-crypto to libwolfsslcpu-crypto so that the regular libwolfssl version comes first when running: opkg install libwolfssl Normally, if the package name matches the opkg parameter, that package is preferred. However, for libraries, the ABI version string is appended to the package official name, and the short name won't match. Failing a name match, the candidate packages are sorted in alphabetical order, and a dash will come before any number. So in order to prefer the original library, the dash should be removed from the alternative library. Fixes: c3e7d86d2b (wolfssl: add libwolfssl-cpu-crypto package) Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* wolfssl: ABI version shouldn't depend on benchmarkEneas U de Queiroz2022-09-251-1/+1
| | | | | | | | | | | Move CONFIG_PACKAGE_libwolfssl-benchmark from the top of PKG_CONFIG_DEPENDS to after PKG_ABI_VERSION is set. This avoids changing the ABI version hash whether the bnechmark package package is selected or not. Fixes: 05df135cac (wolfssl: Rebuild when libwolfssl-benchmark gets changes) Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* download.pl: add aria2c supportBradford Zhang2022-09-251-13/+40
| | | | | | | | | | | | Use aria2c download tool by default on package download if available in the system. aria2c permits to use multiple mirrors and may improve download speed on special context where servers are hard to reach. Co-authored-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bradford Zhang <zyc@zyc.name> [ fix wrong var in the script and improve commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* octeon: fix imagebuilder generation by introducing generic targetNick Hainke2022-09-242-5/+5
| | | | | | | | | | | | | The generic imagebuilder does not have a generic in the name, although this is the default naming scheme. Use bcm53xx as template for this fix. Before the fix: openwrt-imagebuilder-octeon.Linux-x86_64.tar.xz After: openwrt-imagebuilder-octeon-generic.Linux-x86_64.tar.xz Signed-off-by: Nick Hainke <vincent@systemli.org>
* x86/config-5.10: geode: add missing CONFIG_WATCHDOG_CORE optionFlorian Eckert2022-09-241-0/+1
| | | | | | | | | | | | | If this module is not set to y, then I get the following compilation error during geode build. Package kmod-w83627hf-wdt is missing dependencies for the following libraries: watchdog.ko Setting the linux CONFIG_WATCHDOG_CORE to y as in all other targets fixes this issue. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* x86/config-5.15: geode: add missing CONFIG_WATCHDOG_CORE optionFlorian Eckert2022-09-241-0/+1
| | | | | | | | | | | | | | If this module is not set to y, then I get the following compilation error during geode build. Package kmod-w83627hf-wdt is missing dependencies for the following libraries: watchdog.ko Setting the linux CONFIG_WATCHDOG_CORE to y as in all other targets fixes this issue. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* linux/x86: add missing CONFIG_WATCHDOG_CORE to *-wdtFlorian Eckert2022-09-241-4/+10
| | | | | | | | | The packages also need a dependency to watchdog core. This commit adds the needed WATCHDOG_CORE dependency. https://github.com/torvalds/linux/blob/master/drivers/watchdog/Kconfig Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ipq40xx: Add ZTE MF289FGiammarco Marzano2022-09-248-6/+465
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's a 4G Cat.20 router used by Vodafone Italy (called Vodafone FWA) and Vodafone DE\T-Mobile PL (called GigaCube). Modem is a MiniPCIe-to-USB based on Snapdragon X24, it supports 4CA aggregation. There are currently two hardware revisions, which differ on the 5Ghz radio: AT1 = QCA9984 5Ghz Radio on PCI-E bus AT2 = IPQ4019 5Ghz Radio inside IPQ4019 like 2.4Ghz Device specification -------------------- SoC Type: Qualcomm IPQ4019 RAM: 256 MiB Flash: 128 MiB SPI NAND (Winbond W25N01GV) ROM: 2MiB SPI Flash (GD25Q16) Wireless 2.4 GHz (IP4019): b/g/n, 2x2 Wireless 5 GHz: (QCA9984): a/n/ac, 4x4 HW REV AT1 (IPA4019): a/n/ac, 2x2 HW REV AT2 Ethernet: 2xGbE (WAN/LAN1, LAN2) USB ports: No Button: 2 (Reset/WPS) LEDs: 3 external leds: Network (white or red), Wifi, Power and 1 internal (blue) Power: 12 VDC, 1 A Connector type: Barrel Bootloader: U-Boot Installation ------------ 1. Place OpenWrt initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial connector GND (which is right next to the thing with MF289F MIMO-V1.0), RX, TX (refer to this image: https://ibb.co/31Gngpr). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. Stop in u-Boot (using ESC button) and run u-Boot commands: setenv serverip 192.168.0.2 setenv ipaddr 192.168.0.1 set fdt_high 0x85000000 tftp openwrt-ipq40xx-generic-zte_mf289f-initramfs-fit-zImage.itb bootm $loadaddr 5. Please make backup of original partitions, if you think about revert to stock, specially mtd16 (Web UI) and mtd17 (rootFS). Use /tmp as temporary storage and do: WEB PARITION -------------------------------------- cat /dev/mtd16 > /tmp/mtd16.bin scp /tmp/mtd16.bin root@YOURSERVERIP:/ rm /tmp/mtd16.bin ROOT PARITION -------------------------------------- cat /dev/mtd17 > /tmp/mtd17.bin scp /tmp/mtd17.bin root@YOURSERVERIP:/ rm /tmp/mtd17.bin 6. Login via ssh or serial and remove stock partitions (default IP 192.168.0.1): # this can return an error, if ubi was attached before # or rootfs part was erased before. ubiattach -m 17 # it could return error if rootfs part was erased before ubirmvol /dev/ubi0 -N ubi_rootfs # some devices doesn't have it ubirmvol /dev/ubi0 -N ubi_rootfs_data 7. download and install image via sysupgrade -n (either use wget/scp to copy the mf289f's squashfs-sysupgrade.bin to the device's /tmp directory) sysupgrade -n /tmp/openwrt-...-zte_mf289f-squashfs-sysupgrade.bin Sometimes it could print ubi attach error, but please ignore it if process goes forward. Flash Layout NAND: mtd8: 000a0000 00020000 "fota-flag" mtd9: 00080000 00020000 "0:ART" mtd10: 00080000 00020000 "mac" mtd11: 000c0000 00020000 "reserved2" mtd12: 00400000 00020000 "cfg-param" mtd13: 00400000 00020000 "log" mtd14: 000a0000 00020000 "oops" mtd15: 00500000 00020000 "reserved3" mtd16: 00800000 00020000 "web" mtd17: 01d00000 00020000 "rootfs" mtd18: 01900000 00020000 "data" mtd19: 03200000 00020000 "fota" mtd20: 0041e000 0001f000 "kernel" mtd21: 0101b000 0001f000 "ubi_rootfs" SPI: mtd0: 00040000 00010000 "0:SBL1" mtd1: 00020000 00010000 "0:MIBIB" mtd2: 00060000 00010000 "0:QSEE" mtd3: 00010000 00010000 "0:CDT" mtd4: 00010000 00010000 "0:DDRPARAMS" mtd5: 00010000 00010000 "0:APPSBLENV" mtd6: 000c0000 00010000 "0:APPSBL" mtd7: 00050000 00010000 "0:reserved1" Back to Stock (!!! need original dump taken from initramfs !!!) ------------- 1. Place mtd16.bin and mtd17.bin initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial console connector (refer to the pin-out from above). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. rename mtd16.bin to web.img and mtd17.bin to root_uImage_s 5. Stop in u-Boot (using ESC button) and run u-Boot commands: This will erase RootFS+Web: nand erase 0x1000000 0x800000 nand erase 0x1800000 0x1D00000 This will restore RootFS: tftpboot 0x84000000 ${dir}root_uImage_s nand erase 0x1800000 0x1D00000 nand write $fileaddr 0x1800000 $filesize This will restore Web Interface: tftpboot 0x84000000 ${dir}web.img nand erase 0x1000000 0x800000 nand write $fileaddr 0x1000000 $filesize After first boot on stock firwmare, do a factory reset. Push reset button for 5 seconds so all parameters will be reverted to the one printed on label on bottom of the router Signed-off-by: Giammarco Marzano <stich86@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> (Warning: commit message did not conform to UTF-8 - hopefully fixed?, added description of the pin-out if image goes down, reformatted commit message to be hopefully somewhat readable on git-web, redid some of the gpio-buttons & leds DT nodes, etc.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for Sony NCP-HG100/CellularINAGAKI Hiroshi2022-09-2410-1/+756
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sony NCP-HG100/Cellular is a IoT Gateway with 2.4/5 GHz band 11ac (WiFi-5) wireless function, based on IPQ4019. Specification: - SoC : Qualcomm IPQ4019 - RAM : DDR3 512 MiB (H5TC4G63EFR) - Flash : eMMC 4 GiB (THGBMNG5D1LBAIT) - WLAN : 2.4/5 GHz 2T2R (IPQ4019) - Ethernet : 10/100/1000 Mbps x2 - Transceiver : Qualcomm QCA8072 - WWAN : Telit LN940A9 - Z-Wave : Silicon Labs ZM5101 - Bluetooth : Qualcomm CSR8811 - Audio DAC : Realtek ALC5629 - Audio Amp. : Realtek ALC1304 - Voice Input Processor : Conexant CX20924 - Micro Controller Unit : Nuvoton MINI54FDE - RGB LED, Fan, Temp. sensors - Touch Sensor : Cypress CY8C4014LQI - RGB LED driver : TI LP55231 (2x) - LEDs/Keys : 11x, 6x - UART : through-hole on PCB - J1: 3.3V, TX, RX, GND from tri-angle marking - 115200n8 - Power : 12 VDC, 2.5 A Flash instruction using initramfs image: 1. Prepare TFTP server with the IP address 192.168.132.100 and place the initramfs image to TFTP directory with the name "C0A88401.img" 2. Boot NCP-HG100/Cellular and interrupt after the message "Hit any key to stop autoboot: 2" 3. Perform the following commands and set bootcmd to allow booting from eMMC setenv bootcmd "mmc read 0x84000000 0x2e22 0x4000 && bootm 0x84000000" saveenv 4. Perform the following command to load/boot the OpenWrt initramfs image tftpboot && bootm 5. On the initramfs image, perform sysupgrade with the sysupgrade image (if needed, backup eMMC partitions by dd command and download to other place before performing sysupgrade) 6. Wait for ~120 seconds to complete flashing Known issues: - There are no drivers for audio-related chips/functions in Linux Kernel and OpenWrt, they cannot be used. - There is no driver for MINI54FDE Micro-Controller Unit, customized for this device by the firmware in the MCU. This chip controls the following functions, but they cannot be controlled in OpenWrt. - RGB LED - Fan this fan is controlled automatically by MCU by default, without driver - Thermal Sensors (2x) - Currently, there is no driver or tool for CY8C4014LQI and cannot be controlled. It cannot be exited from "booting mode" and moved to "normal op mode" after booting. And also, the 4x buttons (mic mute, vol down, vol up, alexa trigger) connected to the IC cannot be controlled. - it can be exited from "booting mode" by installing and executing i2cset command: opkg update opkg install i2c-tools i2cset -y 1 0x14 0xf 1 - There is a connection issue on the control by uqmi for the WWAN module. But modemmanager can be used without any issues and the use of it is recommended. - With the F2FS format, too many errors are reported on erasing eMMC partition "rootfs_data" while booting: [ 1.360270] sdhci: Secure Digital Host Controller Interface driver [ 1.363636] sdhci: Copyright(c) Pierre Ossman [ 1.369730] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.374729] sdhci_msm 7824900.sdhci: Got CD GPIO ... [ 1.413552] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit [ 1.528325] mmc0: new HS200 MMC card at address 0001 [ 1.530627] mmcblk0: mmc0:0001 004GA0 3.69 GiB [ 1.533530] mmcblk0boot0: mmc0:0001 004GA0 partition 1 2.00 MiB [ 1.537831] mmcblk0boot1: mmc0:0001 004GA0 partition 2 2.00 MiB [ 1.542918] mmcblk0rpmb: mmc0:0001 004GA0 partition 3 512 KiB, chardev (247:0) [ 1.550323] Alternate GPT is invalid, using primary GPT. [ 1.561669] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 ... [ 8.841400] mount_root: loading kmods from internal overlay [ 8.860241] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 8.863746] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 9.240465] block: attempting to load /etc/config/fstab [ 9.246722] block: unable to load configuration (fstab: Entry not found) [ 9.246863] block: no usable configuration [ 9.254883] mount_root: overlay filesystem in /dev/mmcblk0p17 has not been formatted yet [ 9.438915] urandom_read: 5 callbacks suppressed [ 9.438924] random: mkfs.f2fs: uninitialized urandom read (16 bytes read) [ 12.243332] mmc_erase: erase error -110, status 0x800 [ 12.246638] mmc0: cache flush error -110 [ 15.134585] mmc_erase: erase error -110, status 0x800 [ 15.135891] mmc_erase: group start error -110, status 0x0 [ 15.139850] mmc_erase: group start error -110, status 0x0 ...(too many the same errors)... [ 17.350811] mmc_erase: group start error -110, status 0x0 [ 17.356197] mmc_erase: group start error -110, status 0x0 [ 17.439498] sdhci_msm 7824900.sdhci: Card stuck in wrong state! card_busy_detect status: 0xe00 [ 17.446910] mmc0: tuning execution failed: -5 [ 17.447111] mmc0: cache flush error -110 [ 18.012440] F2FS-fs (mmcblk0p17): Found nat_bits in checkpoint [ 18.062652] F2FS-fs (mmcblk0p17): Mounted with checkpoint version = 428fa16b [ 18.198691] block: attempting to load /etc/config/fstab [ 18.198972] block: unable to load configuration (fstab: Entry not found) [ 18.203029] block: no usable configuration [ 18.211371] mount_root: overlay filesystem has not been fully initialized yet [ 18.214487] mount_root: switching to f2fs overlay So, this support uses ext4 format instead which has no errors. Note: - The primary uart is shared for debug console and Z-Wave chip. The function is switched by GPIO15 (Linux: 427). value: 1: debug console 0: Z-Wave - NCP-HG100/Cellular has 2x os-image pairs in eMMC. - 0:HLOS, rootfs - 0:HLOS_1, rootfs_1 In OpenWrt, the first image pair is used. - "bootipq" command in U-Boot requires authentication with signed-image by default. To boot unsigned image of OpenWrt, use "mmc read" and "bootm" command instead. - This support is for "Cellular" variant of NCP-HG100 and not tested on "WLAN" (non-cellular) variant. - The board files of ipq-wifi may also be used in "WLAN" variant of NCP-HG100, but unconfirmed and add files as for "Cellular" variant. - "NET" LED is used to indicate WWAN status in stock firmware. - There is no MAC address information in the label on the case, use the address included in UUID in the label as "label-MAC" instead. - The "CLOUD" LEDs are partially used for indication of system status in stock firmware, use they as status LEDs in OpenWrt instead of RGB LED connected to the MCU. MAC addresses: LAN : 5C:FF:35:**:**:ED (ART, 0x6 (hex)) WAN : 5C:FF:35:**:**:EF (ART, 0x0 (hex)) 2.4 GHz: 5C:FF:35:**:**:ED (ART, 0x1006 (hex)) 5 GHz : 5C:FF:35:**:**:EE (ART, 0x5006 (hex)) partition layout in eMMC (by fdisk, GPT): Disk /dev/mmcblk0: 7733248 sectors, 3776M Logical sector size: 512 Disk identifier (GUID): **** Partition table holds up to 20 entries First usable sector is 34, last usable sector is 7634910 Number Start (sector) End (sector) Size Name 1 34 1057 512K 0:SBL1 2 1058 2081 512K 0:BOOTCONFIG 3 2082 3105 512K 0:QSEE 4 3106 4129 512K 0:QSEE_1 5 4130 4641 256K 0:CDT 6 4642 5153 256K 0:CDT_1 7 5154 6177 512K 0:BOOTCONFIG1 8 6178 6689 256K 0:APPSBLENV 9 6690 8737 1024K 0:APPSBL 10 8738 10785 1024K 0:APPSBL_1 11 10786 11297 256K 0:ART 12 11298 11809 256K 0:HSEE 13 11810 28193 8192K 0:HLOS 14 28194 44577 8192K 0:HLOS_1 15 44578 306721 128M rootfs 16 306722 568865 128M rootfs_1 17 568866 3958065 1654M rootfs_data [initial work] Signed-off-by: Iwao Yuki <dev.clef@gmail.com> Co-developed-by: Iwao Yuki <dev.clef@gmail.com> [adjustments, cleanups, commit message, sending patch] Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> (dropped clk_unused_ignore, dropped 901-* patches, renamed key nodes, changed LEDs chan/labels to match func-en, made :net -> (w)wan leds) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: base-files: properly close caseTomasz Maciej Nowak2022-09-241-0/+1
| | | | | | | | Fix this occurrence during boot: /bin/board_detect: line 10: Unsupported: not found Fixes: 80baffd2aa91 (" ipq40xx: add support for Pakedge WR-1") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ipq40xx: luma_wrtq-329acn: differentiate ethernet mac addressesTomasz Maciej Nowak2022-09-241-0/+12
| | | | | | | | On OEM firmware both addresses for In and Out ports are different. Set them as such also in OpenWrt. Fixes: e24635710c7e (" ipq40xx: add support for Luma Home WRTQ-329ACN") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* apm821xx: make 5.15 kernel defaultChristian Lamparter2022-09-241-2/+1
| | | | | | 5.15 has been available for some time for testing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: refresh 5.15 configChristian Lamparter2022-09-241-2/+2
| | | | | | | | | | | use the toolchain's default CPU (464fp) as the CPU option. This fixes a CPU selection prompt which shows up now. CPU selection > 1. Generic 32 bits powerpc (POWERPC_CPU) (NEW) 2. Rely on the toolchain's implicit default CPU (TOOLCHAIN_DEFAULT_CPU) (NEW) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: fix RUTX10 Wi-Fi woesKasparas Elzbutas2022-09-242-30/+8
| | | | | | | | | | | | | This partially reverts: commit cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") U-Boot on these devices mangles the device tree, so nvmem-cell type calibration doesn't work. Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") Signed-off-by: Kasparas Elzbutas <elzkas@gmail.com> (added reference to commit, rewrote commit message) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: intel-microcode: update to 20220809Christian Lamparter2022-09-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Debian's changelog by Henrique de Moraes Holschuh <hmh@debian.org>: * New upstream microcode datafile 20220809 * Fixes INTEL-SA-00657, CVE-2022-21233 Stale data from APIC leaks SGX memory (AEPIC leak) * Fixes unspecified errata (functional issues) on Xeon Scalable * Updated Microcodes: sig 0x00050653, pf_mask 0x97, 2022-03-14, rev 0x100015e, size 34816 sig 0x00050654, pf_mask 0xb7, 2022-03-08, rev 0x2006e05, size 44032 sig 0x000606a6, pf_mask 0x87, 2022-04-07, rev 0xd000375, size 293888 sig 0x000706a1, pf_mask 0x01, 2022-03-23, rev 0x003c, size 75776 sig 0x000706a8, pf_mask 0x01, 2022-03-23, rev 0x0020, size 75776 sig 0x000706e5, pf_mask 0x80, 2022-03-17, rev 0x00b2, size 112640 sig 0x000806c2, pf_mask 0xc2, 2022-03-19, rev 0x0028, size 97280 sig 0x000806d1, pf_mask 0xc2, 2022-03-28, rev 0x0040, size 102400 sig 0x00090672, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 sig 0x00090675, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 sig 0x000906a3, pf_mask 0x80, 2022-06-15, rev 0x0421, size 216064 sig 0x000906a4, pf_mask 0x80, 2022-06-15, rev 0x0421, size 216064 sig 0x000a0671, pf_mask 0x02, 2022-03-17, rev 0x0054, size 103424 sig 0x000b06f2, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 sig 0x000b06f5, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uml: add Kernel 5.15 support via testingChristian Lamparter2022-09-247-1/+597
| | | | | | Add the latest default Kernel for testing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uml: fix 5.10 buildChristian Lamparter2022-09-241-0/+32
| | | | | | | | | | | | | the 5.10 uml build currently breaks with: /usr/bin/ld: arch/um/os-Linux/signal.o: in function `sigusr1_handler': arch/um/os-Linux/signal.c:141: undefined reference to `uml_pm_wake' But there's an upstream fix for this. Backport the fix for now but also let upstream know so it finds its way through the -stable releases. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uml: headers are not exportableChristian Lamparter2022-09-241-1/+1
| | | | | | | | | | | | | | | | | | When building UML this showed up as of late (2022-09-01): | Makefile:1335: *** Headers not exportable for UML. Stop. This message popped up because of an upstream patch that fixed this error not showing up sooner. For more information see: <https://lore.kernel.org/lkml/20220901011252.550830-1-masahiroy@kernel.org/T/> Now, I don't think we can just skip the kernel headers. Some userspace applications are going to need these. So, The next best alternative I can think of, is to go with the headers by the host arch the UML is compiled for. (Technically, ARCH= should be safe for all other targets as well... But let's not poke a hornet's nest) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: fix parameter reading for AC_BE tx burstingAlberto Martinez-Alvarez2022-09-241-2/+2
| | | | | | | | | | | | | | | The "tx_burst" option which should control the value was expecting more of a list and hence tx_queue_data2_burst value wasn't updated. Yes, it would make sense to have a list for this, the existing code only updates tx_queue_data2_burst and not the other tx_queue_data[0134]_burst values. Signed-off-by: Alberto Martinez-Alvarez <amteza@gmail.com> (formatted commit message, wrote extra information into commit, moved tx_burst to existing json_get_vars) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: Move some IOMMU options to genericHauke Mehrtens2022-09-2412-16/+10
| | | | | | | | | | | | This adds some missing IOMMU related options for x86/64 and moves some of them to generic for all targets. On x86 IOMMU_DEFAULT_DMA_LAZY is used by default, on all other platforms IOMMU_DEFAULT_DMA_STRICT is the default. we just follow the default kernel configuration here. Fixes: 8fea4a102ccd ("x86/64: enable IOMMU support") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: switch to 5.15 as default kernelNick Hainke2022-09-241-2/+1
| | | | | | | | | | | | | | | | | | | The 5.15 kernel has new interesting features like MGLRU. Most of the targets already have added support for testing kernel 5.15 since April 2022. Set 5.15 as default for all subtargets. Testing support was added here: - ae6bfb7d67c1 ("ath79: tiny: add 5.15 support for tiny subtarget") - 9a0155bc4fa3 ("ath79: add 5.15 support for generic subtarget") - 5af9aafabbc0 ("ath79: mikrotik: add 5.15 support for mikrotik subtarget") - f3fa68e5153b ("ath79: nand: add 5.15 support for nand subtarget") Tested on: - Nanostation M5 XM (tiny) - TP-Link EAP-225 Outdoor (generic) - TP-Link CPE210 (generic) Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: fix mac-address-increment on driver probe deferWill Moss2022-09-232-0/+62
| | | | | | | | Fixes situations where MAC address gets incremented multiple times if device initialization fails at first and then is deferred. Fixes: d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to generic implementation") Signed-off-by: Will Moss <willormos@gmail.com>
* mac80211: remove broken CFG80211_WEXT select from the r8723bs driverFelix Fietkau2022-09-231-0/+10
| | | | | | Fixes a build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: mark lib80211 as hiddenFelix Fietkau2022-09-231-0/+1
| | | | | | | Prevents build errors by ensuring that it is only selected when a wext based driver that needs it is also selected Signed-off-by: Felix Fietkau <nbd@nbd.name>
* generic: 5.15: add missing PAGE_POOL_STATS configChristian Marangi2022-09-231-0/+1
| | | | | | Add new PAGE_POOL_STATS config backported for the mtk offload patches. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: pick patches for MediaTek Ethernet from linux-nextDaniel Golle2022-09-2240-19/+5839
| | | | | | | | | | | | | | | | | | | Pick patches with several fixes and improvements, preparation for upcoming WED (TX) [1] as well as basic XDP support [2] with MediaTek's Filogic SoCs to the mtk_eth_soc driver. Also pick follow-up patch fixing Ethernet on MT7621 [3]. Tested on Bananapi BPi-R3 (MT7986), Bananapi BPi-R64 (MT7622), Bananapi BPi-R2 (MT7623), MikroTik RouterBoard M11G (MT7621). [1]: https://patchwork.kernel.org/project/netdevbpf/list/?series=662108&state=* [2]: https://patchwork.kernel.org/project/netdevbpf/list/?series=675368&state=* (the first part of the series adding wed nodes to mt7986a.dtsi was applied to the copy of mt7986a.dtsi in our tree) [3]: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=5e69163d3b9931098922b3fc2f8e786af8c1f37e Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* prism54-firmware: set DL_DIR to package specific subdirectoryMichael Pratt2022-09-221-0/+2
| | | | | | | | | | | | | | This package downloads raw files which have names that are not corresponding to the name and version of the package as it is defined in the Makefile. Use the option DL_SUBDIR to set the DL_DIR to be a subdirectory named with PKG_NAME and PKG_RELEASE to better organize the downloads. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* b43legacy-firmware: set DL_DIR to package specific subdirectoryMichael Pratt2022-09-221-0/+2
| | | | | | | | | | | | | | This package downloads raw files which have names that are not corresponding to the name and version of the package as it is defined in the Makefile. Use the option DL_SUBDIR to set the DL_DIR to be a subdirectory named with PKG_NAME and PKG_VERSION to better organize the downloads. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath10k-ct-firmware: set DL_DIR to package specific subdirectoryMichael Pratt2022-09-221-0/+2
| | | | | | | | | | | | | | This package downloads raw files which have names that are not corresponding to the name and version of the package as it is defined in the Makefile. Use the option DL_SUBDIR to set the DL_DIR to be a subdirectory named with PKG_NAME and PKG_VERSION to better organize the downloads. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* acx-mac80211: set DL_DIR to package specific subdirectoryMichael Pratt2022-09-221-0/+2
| | | | | | | | | | | | | | | | | This package downloads raw files which have names that are not corresponding to the name and version of the package as it is defined in the Makefile. Use the option DL_SUBDIR to set the DL_DIR to be a subdirectory named with PKG_NAME and PKG_SOURCE_DATE to better organize the downloads. Define PKG_VERSION here using PKG_SOURCE_DATE. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* scripts/dl_cleanup: add support for subdirectoriesMichael Pratt2022-09-221-9/+18
| | | | | | | | | | | Allow comparing subdirectories exactly like files. Handle a corner case where the new subdirectory has the same tarball inside of it as the one that was downloaded before a subdirectory for that package was established. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* rules.mk: add option to download files into a subdirectoryMichael Pratt2022-09-221-1/+1
| | | | | | | | | | | | | | | | | | Some packages download a single raw file or set of raw files instead of an archive. The filenames of these download files have names and version numbers that do not directly correspond to the name and version of the package as it is defined in its Makefile. To better organize downloaded files, this adds the option of creating a subdirectory in the download directory for these files that can be named with package specific variables. DL_DIR is now a recursively expanded variable since the value now depends on whether DL_SUBDIR is defined. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* base-files: Actually set default nameOlliver Schinagl2022-09-221-1/+1
| | | | | | | | | | | The currently used shell expansion doesn't seem to exist [0] and also does not work. This surely was not intended, so lets allow default naming to actually work. [0]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html Fixes: be09c5a3cd65 ("base-files: add board.d support for bridge device") Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* iwinfo: update to the latest versionFelix Fietkau2022-09-221-3/+3
| | | | | | | | | | 46f04f3808e8 devices: add MediaTek MT7986 WiSoC b3e08c8b5a8f ops: make support for wireless extensions optional 1f695d9c7f82 nl80211: allow phy names that don't start with 'phy' b7f9f06e1594 nl80211: fix phy/netdev index lookup 4a43b0d40ba5 nl80211: look up the phy name instead of assuming name == phy<idx> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add ubus notification on sta authorizedFelix Fietkau2022-09-223-2/+79
| | | | | | | Also include the station auth_type in the ubus and log message in order to detect, if clients used FT or FILS to associate Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: disable drivers that rely on wireless extensionsFelix Fietkau2022-09-223-0/+5
| | | | | | They are unmaintained and don't work properly with current wifi scripts Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: disable wireless extensions only when neededFelix Fietkau2022-09-226-12/+28
| | | | | | They are only needed by a few very old drivers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 5.15 to 5.15.69John Audia2022-09-229-174/+174
| | | | | | | | | | All patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.144John Audia2022-09-222-7/+7
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-22 09:37:31 +0000