aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* musl: ldso/dlsym: fix mips returning undef dlsymLuiz Angelo Daros de Luca2019-08-173-2/+138
| | | | | | | | | | | | | | | This happens only the second time a library is loaded by dlopen(). After lib1 is loaded, dlsym(lib1,"undef1") correctly resolves the undef symbol from lib1 dependencies. After the second library is loaded, dlsym(lib2,"undef1") was returning the address of "undef1" in lib2 instead of searching lib2 dependencies. Using upstream fix which now uses the same logic for relocation time and dlsym. Fixes openwrt/packages#9297 Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* gemini: Enable flash boot on reference design typeLinus Walleij2019-08-172-9/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The flash layout on the Storlink reference design for Gemini is using 2 MB flash for the kernel, and it also insists on overwriting the partition table with default values on every boot. The same is true for the SQ201. This poses a problem on recent OpenWrt firmware as the base zImage is bigger than 2 MB. At the same time there is a ramdisk partition of 6 MB that we don't really need. The partition table looks like this: Creating 7 MTD partitions on "30000000.flash": 0x000000000000-0x000000016000 : "BOOT" 0x000000120000-0x000000320000 : "Kern" 0x000000320000-0x000000920000 : "Ramdisk" 0x000000920000-0x000000f20000 : "Application" 0x000000f20000-0x000000f40000 : "VCTL" 0x000000f40000-0x000000fe0000 : "CurConf" 0x000000fe0000-0x000001000000 : "FIS directory" On boot the "Kern" partition is copied to RAM @0x01600000 and the "Ramdisk" partition is copied to RAM @0x00800000. Then the kernel is executed. The idea with this patch is to extend the "Kern" partition with the "Ramdisk" partition to get a full 8 MB to use for the kernel. Then we put the OpenWrt JFFS2 rootfs inside the "Application" partition. We create a small assembly loop that we prepend to the "Kern" image that will copy the "Kern" from 0x0160000 and the "Ramdisk" from 0x00800000 and put them in consecutive space at 0x00400000 and execute it from there, using "Application" as rootfs. We generate 3 main files: - zImage - contains the assembly bootstrap loop and the first part of the generated kernel image - rd.gz - contains the second part of the generated kernel image - hddapp.tgz - contains the root filesystem On the SQ201 I flash these manually using the native boot loader PLATO, "Y" alternative for the zImage, "R" for the rd.gz image and "A" for hddapp.tgz. This works fine and I can now boot to prompt on the SQ201 with nothing but flash. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Add copy-kernel utility packageLinus Walleij2019-08-173-0/+78
| | | | | | | | | | | This package just contains a small Gemini-only assembler bootstrap loop to copy the kernel from the two fragments (previously zImage at 0x01600000 and initramdisk at 0x00800000) into one big zImage of up to 8 MB at 0x00400000. It will be built on demand from the Gemini image Makefile. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Fix up flash accessesLinus Walleij2019-08-172-0/+140
| | | | | | | | The SL93512r and the NAS4220B have Redboot partition tables (rely on these) and need to boot from mtdblock3. Add two patches from upstream to fix this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Fix up some confused pin config on SL93512rLinus Walleij2019-08-171-0/+54
| | | | | | Upstream patch fixing the errors in the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* zynq: remove kernel 4.14 supportLuis Araneda2019-08-174-846/+0
| | | | Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: switch to kernel 4.19Luis Araneda2019-08-171-1/+1
| | | | | | Use kernel 4.19 by default Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: k4.19: fix kernel panic on smp bring-upLuis Araneda2019-08-171-0/+35
| | | | | | | | | | | This fixes a kernel panic when validating the arguments of memcpy at runtime, which is enabled by generic's CONFIG_FORTIFY_SOURCE for k4.19 This wasn't triggered on 4.14, as ARCH_HAS_FORTIFY_SOURCE was added on k4.17 for the ARM architecture Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: kernel: use some configs provided by genericLuis Araneda2019-08-171-9/+1
| | | | | | | | | - Select CONFIG_PREEMPT_NONE (server) instead of CONFIG_PREEMPT (low-latency desktop) - Remove CONFIG_USELIB - Remove CONFIG_SYSCTL_SYSCALL Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: add k4.19 configLuis Araneda2019-08-171-0/+664
| | | | | | | Copied from kernel 4.14 and refreshed with make kernel_oldconfig Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* wolfssl: bump to 4.1.0-stableEneas U de Queiroz2019-08-175-56/+16
| | | | | | | | | | | | | | | | | Always build AES-GCM support. Unnecessary patches were removed. This includes two vulnerability fixes: CVE-2019-11873: a potential buffer overflow case with the TLSv1.3 PSK extension parsing. CVE-2019-13628 (currently assigned-only): potential leak of nonce sizes when performing ECDSA signing operations. The leak is considered to be difficult to exploit but it could potentially be used maliciously to perform a lattice based timing attack. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* bzip2: Update to 1.0.8Rosen Penev2019-08-173-19/+34
| | | | | | | | | | | | | | | | It seems bzip2 was abandoned by the author and adopted by the sourceware people. The last release of bzip2 was from 2010. Several security bugs were fixed as well as others. Fixed up PKG_LICENSE to be compatible with SPDX. Changed URLs to point to the new home. Added patch that gets rid of deprecated utime function and switches it to utimensat. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* build: fix indent in image-commands.mkAdrian Schmutzler2019-08-171-1/+1
| | | | | | Convert leading spaces to tab to match rest of the file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: Update to version 5.3-rc4-1Hauke Mehrtens2019-08-1748-1450/+231
| | | | | | | | | The removed patches were applied upstream. The type of the RT2X00_LIB_EEPROM config option was changed to bool, because boolean is an invalid value and the new kconfig system complained about this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.2.8-1Hauke Mehrtens2019-08-1718-72/+29
| | | | | | | This contains multiple fixes from the upstream kernel. The removed patch was merged upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mdadm: Use upstream fix for musl 1.1.23 compileHauke Mehrtens2019-08-173-221/+28
| | | | | Fixes: ba8aeb02eae2 ("mdadm: Fix compile with musl 1.1.23") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Allow CONFIG_IEEE80211W for all but mini variantHauke Mehrtens2019-08-171-6/+2
| | | | | | | | | This commit will activate CONFIG_IEEE80211W for all, but the mini variant when at least one driver supports it. This will add ieee80211w support for the mesh variant for example. Fixes: FS#2397 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Remove ROBO switch supportHauke Mehrtens2019-08-171-2/+0
| | | | | | The driver was removed from OpenWrt a long time ago. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lua5.3: include hpp headerColby Whitney2019-08-161-1/+2
| | | | | | The install was missing the hpp header. Adding that in. Signed-off-by: Colby Whitney <colby.whitney@luxul.com>
* mvebu: sysupgrade: sdcard: fix platform_do_upgrade_sdcardKlaus Kudielka2019-08-161-18/+16
| | | | | | | | | | | | Unconditionally execute the final case statement, even if the disk layout changed. This is necessary, to keep the original Turris Omnia flash instructions working: The disk layout WILL change, when switching from TurrisOS to OpenWRT. Without updating the uboot environment at the same time, the user would end up with an unbootable system. Fixes commit 2e5a0b81ec ("mvebu: sysupgrade: sdcard: keep user added ...") Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
* brcm63xx: do not build images for 16 MiB RAM devices by defaultJonas Gorski2019-08-161-0/+24
| | | | | | | | OpenWrt will run out of RAM while booting with the default package set, so let's not provide images that will likely fail. They can still be built manually through source or IB if needed. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* firewall: improve ipset supportKevin Darbyshire-Bryant2019-08-161-4/+4
| | | | | | | | | | | | | | | | | | | | Bump to latest git HEAD 509e673 firewall3: Improve ipset support The enabled option did not work properly for ipsets, as it was not checked on create/destroy of a set. After this commit, sets are only created/destroyed if enabled is set to true. Add support for reloading, or recreating, ipsets on firewall reload. By setting "reload_set" to true, the set will be destroyed and then re-created when the firewall is reloaded. Add support for the counters and comment extensions. By setting "counters" or "comment" to true, then counters or comments are added to the set. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* lantiq: unify Fritz!Box LED mappingsDavid Bauer2019-08-154-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit unifies the LED mapping of the AVM Fritz!Box routers, which have a combined Power/DSL LED. With the stock firmware, the Power LED has the following characteristics: - Blink when DSL sync is being established - Solid when DSL sync is present We can't completely resemble this behavior in OpenWrt. Currently, the Power LED is completely off, when DSL sync is missing. This is not really helpful, as a user might have the impression, that he bricked his device. Instead, map the Info-LED to the state of the DSL connection. There is no consistent behavior for the Info-LED in the stock firmware, as the user can set it's function by himself. The DSL connection state is one possible option for the Info LED there. Also use the red Power LED to indicate a running upgrade, in case the board has a two-color Power LED. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: remove SUPPORTED_DEVICES for TP-Link Archer D50 v1Adrian Schmutzler2019-08-151-1/+0
| | | | | | | This device has not been supported in ar71xx, so there is no need for an explicit SUPPORTED_DEVICES entry. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: use Power LED as System LED for TL-WR842Nv3David Bauer2019-08-151-6/+6
| | | | | | | | | | | The TP-Link TL-WR842N v3 has a software-controllable Power LED. The WPS LED is normally only used as a System LED, when the Power LED can't be controlled by software. Additionally, the Power LED is also the System LED for this board in ar71xx. Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq40xx: fix AVM NAND caldata extractionDavid Bauer2019-08-151-3/+15
| | | | | | | | | | | | | The AVM Fritz!Box 7530 (and probably other AVM IPQ4019 NAND devices) has it's caldata not stored consistently, but instead at currently 3 known possible offsets. As we get a non-zero exit code from fritz_cal_extract, simply try all three possible offsets on both bootloader partitions, until a matching caldata for each radio is found. Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 4.19 to 4.19.66Koen Vandeputte2019-08-1411-31/+31
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.138Koen Vandeputte2019-08-146-20/+20
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.189Koen Vandeputte2019-08-148-24/+24
| | | | | | | | | Refreshed all patches. Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* treewide: convert WiFi caldata size and offset to hexadecimalAdrian Schmutzler2019-08-1411-202/+202
| | | | | | | | | | | | | | This changes size and offset set for WiFi caldata extraction and MAC address adjustment to hexadecimal notation. This will be much clearer for the reader when numbers are big, and will also match the style used for mtd-cal-data in DTS files. Since dd cannot deal with hexadecimal notation, one has to convert back to decimal by simple $(($hexnum)). Acked-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: convert MAC address location offsets to hexadecimalAdrian Schmutzler2019-08-1422-113/+113
| | | | | | | | | | | | | This changes the offsets for the MAC address location in mtd_get_mac_binary* and mtd_get_mac_text to hexadecimal notation. This will be much clearer for the reader when numbers are big, and will also match the style used for mtd-mac-address in DTS files. (e.g. 0x1006 and 0x5006 are much more useful than 4102 and 20486) Acked-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* imagebuilder: fix `make info` for empty SUPPORTED_DEVICESPaul Spooren2019-08-141-1/+2
| | | | | | | | | For x86/64 (maybe more) target the SUPPORTED_DEVICES variable is empty which causes the `&&` junction to fail, producing a non zero exit code. Tested-by: Paul Spooren <mail@aparcar.org> Fixed-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: allow overriding default selection state for devicesJonas Gorski2019-08-133-2/+7
| | | | | | | | | | | | | | | | | | | Allow overriding the default selection state for Devices, similar to setting a default for packages. E.g. by setting DEFAULT to n, they won't be selected by default anymore when enabling all device in the multi device profile. This allows preventing images being built by the default config for known broken devices, devices without enough RAM/flash, or devices not working with a certain kernel versions. This does not prevent the devices from being manually selected or images being built by the ImageBuilder. These devices often still have worth with a reduced package-set, or as a device for regression testing, when no better device is available. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* image.mk: remove device_ from manifest filenamePaul Spooren2019-08-131-1/+1
| | | | | | | | | | | | | | | | | | | The manifest file is based on IMG_PREFIX and PROFILE_SANITIZED, whereas the latter takes a string like DEVICE_8dev_carambola2 and sanitizes it. This behaviour results in a useless "device_" profile-prefix in the device manifest filename. Now uses *subst* to remove that. Therefore this patch results more consistent device file names: openwrt-ath79-generic-8dev_carambola2-initramfs-kernel.bin openwrt-ath79-generic-8dev-carambola2.manifest openwrt-ath79-generic-8dev_carambola2-squashfs-sysupgrade.bin instead of a single file being called openwrt-ath79-generic-device_8dev-carambola2.manifest Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: add buildinfo files for reproducibilityPaul Spooren2019-08-133-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | generate feeds.buildinfo and version.buildinfo in build dir after containing the feed revisions (via ./scripts/feeds list -sf) as well as the current revision of buildroot (via ./scripts/getver.sh). With this information it should be possible to reproduce any build, especially the release builds. Usage would be to move feeds.buildinfo to feeds.conf and git checkout the revision hash of version.buildinfo. Content of feeds.buildinfo would look similar to this: src-git routing https://git.openwrt.org/feed/routing.git^bf475d6 src-git telephony https://git.openwrt.org/feed/telephony.git^470eb8e ... Content of version.buildinfo would look similar to this: r10203+1-c12bd3a21b Without the exact feed revision it is not possible to determine installed package versions. Also rename config.seed to config.buildinfo to follow the recommended style of https://reproducible-builds.org/docs/recording/ Signed-off-by: Paul Spooren <mail@aparcar.org>
* tools/patch: apply upstream patch for cve-2019-13638Russell Senior2019-08-132-1/+39
| | | | | | | | | | | | GNU patch through 2.7.6 is vulnerable to OS shell command injection that can be exploited by opening a crafted patch file that contains an ed style diff payload with shell metacharacters. The ed editor does not need to be present on the vulnerable system. This is different from CVE-2018-1000156. https://nvd.nist.gov/vuln/detail/CVE-2019-13638 Signed-off-by: Russell Senior <russell@personaltelco.net>
* tools/scons: update scons to 3.1.1Russell Senior2019-08-131-2/+2
| | | | | | | | | | This version bump includes a bunch of fixes and improvements, which should fix gpsd build breakage in the package feeds. Ref: https://github.com/SCons/scons/blob/master/src/CHANGES.txt Signed-off-by: Russell Senior <russell@personaltelco.net> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: update DTS for TP-Link WDR3600/WDR4300 v1Adrian Schmutzler2019-08-131-30/+29
| | | | | | | This replaces gpio-export by gpio-hogs and switches buttons to interrupt-driven gpio-keys. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* Revert faulty tree pushFelix Fietkau2019-08-1237-2822/+536
| | | | | | | | | | | | Revert "mac80211: add new minstrel_ht patches to improve probing on mt76x2" (9861050b85e5381c93d73ffdbc24c130400e0fb8) Revert "kernel: use bulk free in kfree_skb_list to improve performance" (98b654de2e7502507b31f0fb82befbb48f9c8542) Revert "ramips: add preliminary support for WIO ONE" (085141dc5ba5e763e1bf4c1a2fd6957160810ccc) Revert "ramips: add preliminary support for SGE AP-MTKH7-0006 developer board" (b1db6d0539511f60bf65fbde28b16afa31180e34) Revert "build: use config.site generated by autoconf-lean, drop hardcoded sitefiles" (363ce4329d4f6c00b4a7cb83dd1821fafc0d40ad) Revert "toolchain: add autoconf-lean" (fdb30eed03ae56cd87078b64d9b2fac00799e783) Revert "build: allow overriding the filename on the remote server when downloading" (6fa0e07758524eddf20c9b66dfcb55c490e1961e) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add new minstrel_ht patches to improve probing on mt76x2Felix Fietkau2019-08-124-0/+591
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: use bulk free in kfree_skb_list to improve performanceFelix Fietkau2019-08-122-0/+122
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add preliminary support for WIO ONEFelix Fietkau2019-08-123-0/+144
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add preliminary support for SGE AP-MTKH7-0006 developer boardFelix Fietkau2019-08-124-0/+125
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: use config.site generated by autoconf-lean, drop hardcoded sitefilesFelix Fietkau2019-08-1220-535/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* toolchain: add autoconf-leanFelix Fietkau2019-08-125-1/+1838
| | | | | | Use it to generate a more comprehensive configure sitefile Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: allow overriding the filename on the remote server when downloadingFelix Fietkau2019-08-121-0/+1
| | | | | | | | Github releases usually don't contain the project name in the release filename, which makes them very inconvenient to use from the build system. Add support for naming the local file differently. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sdk: fix GCC and Python dangling symlinksPetr Štetiar2019-08-121-1/+2
| | | | | | | | | | | | | Force prereq again in SDK in order to fix GCC and Python dangling symlinks: staging_dir/host/bin/g++ -> /builder/ath79_generic/ccache_cxx.sh staging_dir/host/bin/gcc -> /builder/ath79_generic/ccache_cc.sh staging_dir/host/bin/python -> /usr/bin/python3.5 staging_dir/host/bin/python3 -> /usr/bin/python3.5 Ref: FS#2424 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: fix lan and wan mac addresses for Cudy WR1000Davide Fioravanti2019-08-112-1/+2
| | | | | | | Lan and Wan addresses are swapped compared to the original firmware. This patch fixes this problem Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* lantiq: add led-upgrade alias for Fritz!Box 7412David Bauer2019-08-101-0/+1
| | | | | | | This adds the led-upgrade alias for the AVM Fritz!Box 7412 to indicate a running firmware upgrade. Signed-off-by: David Bauer <mail@david-bauer.net>
* lantiq: enable second VPE on Fritz!Box 7412David Bauer2019-08-102-2/+2
| | | | | | | | | The AVM Fritz!Box 7412 does not use the VMMC part of the Lantiq chip but rather a proprietary solution based on the DECT chip for the FXS ports. Therefore, the second VPE can be enabled for use with OpenWrt. Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 15:49:57 +0000