aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* apm821xx: MX60(W): re-enable + allow bigger future kernelsChristian Lamparter2021-10-222-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MX60's kernel is limited to 0x3EFC00 by the values in mkmerakifw.c. Since the initramfs method of loading the kernel seems to be working, this patch does away with the use of the mkmerakifw tool for the MX60(W). But this will go along with a change in u-boot as well. So before you upgrade, please attach the serial cable and perform: | setenv owrt510_boot run meraki_ubi owrt_bootargs\; run owrt_load1 owrt_bootkernel\; run owrt_load2 owrt_bootkernel | setenv bootcmd run owrt510_boot | saveenv Note: You won't be able to use older OpenWrt releases without switching the bootcmd back to owrt_boot! Note2: We are no longer compatible with older OpenWrt MX60 installs. the legacy BOARD_NAME and SUPPORTED_DEVICES can be dropped. This is because upgrades from older images are not possible without uboot env changes anymore. Also the bogus BLOCKSIZE value (which was set to 63k back then, in order to get the kernel properly aligned after the fdt + meraki header) can be set to the NANDs real value. The FDT size (which was needed for alignment) can now be slimmed down as well. Co-developed-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: MBL: HDD regulators overhaul for MBL DUOChristian Lamparter2021-10-221-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Takimata reported on the OpenWrt forum in thread [0], that his MyBook Live Duo wasn't booting OpenWrt 21.02 after upgrading from the previous OpenWrt 19.07. The last logged entries on his console |[ 0.531599] sata1-regulator GPIO handle specifies active low - ignored |[ 0.538391] sata0-regulator GPIO handle specifies active low - ignored |[ 0.759791] ata2: SATA link down (SStatus 0 SControl 300) |[ 0.765251] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |[ 5.909555] ata1.00: qc timeout (cmd 0xec) |[ 5.913656] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) |[ 6.231757] ata1: SATA link down (SStatus 0 SControl 300) This extract clearly showed that the HDD on which OpenWrt is installed, simply disappeared after the SATA power regulators had been initialized. The reason why this worked with OpenWrt 19.07 was because the kernel config symbol CONFIG_REGULATOR=y was not set in the target's config-4.14. (This shows that the MBL Single does differ from the DUO in that it does not have programmable power regulators for the HDDs.) [0] <https://forum.openwrt.org/t/21-02-0-and-snapshot-fail-to-boot-on-my-book-live-duo/106585> Reported-by: Takimata (forum) Tested-by: Takimata (forum) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: mikrotik: use 64 KiB SPI NOR erase sectorsRoger Pueyo Centelles2021-10-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes CONFIG_MTD_SPI_NOR_USE_4K_SECTORS from the default symbols for the ath79/mikrotik target. MikroTik devices hold some of their user-configurable settings in the soft_config partition, which is typically sized 4 KiB, of the SPI NOR flash memory. Previously, in the ar71xx target, it was possible to use 64 KiB erase sectors but also smaller 4 KiB ones when needed. This is no longer the case in ath79 with newer kernels so, to be able to write to these 4 KiB small partitions without erasing 60 KiB around, the CONFIG_MTD_SPI_NOR_USE_4K_SECTORS symbol was added to the defaults. However, this ended up making sysupgrade images which were built with 64 KiB size blocks not to keep settings (e.g., the files under /etc/config/) over the flashing process. Using 4 KiB erase sector size on the sysupgrade images (by setting BLOCKSIZE = 4k) allows keeping settings over a flashing process, but renders the process terribly slow, possibly causing a user to mistakenly force a manual device reboot while the process is still on- going. Instead, ditching the 4 KiB erase sectors for the default 64 KiB erase size provides normal SPI write speed and sysupgrade times, at the expense of not being able to modify the soft_config partition (which is rarely a required thing). An OpenWrt patch for MTD_SPI_NOR_USE_4K_SECTORS_LIMIT may once have allowed to use different per-partition erase sector sizes. Due to changes on recent kernels it now only works on a per-device basis. Also, partial eraseblock write can be performed in ath79 with kernels 5.4 and lower, by copying the blocks from the 64 KiB, erasing the whole sector and restoring those blocks not meant to be modified. A kernel bump had that patch broken for a long time, but got fixed in bf2870c. Note: the settings in the soft_config partition can be reset to their defaults by holding the reset button for 5 seconds (and less than 10 seconds) at device boot. Fixes: FS#3492 (sysupgrade […] loses settings...) Fixes: a66eee63368e (ath79: add mikrotik subtarget) Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* bcm53xx: bridge all LAN ports on Linksys EA9500Rafał Miłecki2021-10-221-1/+1
| | | | | | External switch ports need to be bridged too. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* tools/isl: update the download URLRui Salvaterra2021-10-211-1/+1
| | | | | | | | | isl.gforge.inria.fr has been dead since early this month [1]. Switch to libisl.sourceforge.io for the time being. [1] https://groups.google.com/g/isl-development/c/JGaMo2VUu_8 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* toolchain: switch packaged toolchain to tar.xzPaul Spooren2021-10-211-4/+5
| | | | | | | | Currently the tar.bz2 while ImageBuilder and SDK switched to tar.xz. Unify it for faster compression since it will make use of multi-threading. Signed-off-by: Paul Spooren <mail@aparcar.org>
* bcm53xx: switch to the upstream DSA-based b53 driverRafał Miłecki2021-10-215-77/+49
| | | | | | | | | | 1. Drop swconfig 2. Simplify network setup 3. Verify network config 4. Disable Buffalo WZR-900DHP for now - it misses ports definition Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-By: Christian Lamparter <chunkeey@gmail.com>
* bcm47xx: add kernel 5.10 supportRafał Miłecki2021-10-2121-1/+2295
| | | | | | | It's for *development* only as it doesn't work with lzma-loader due to bigger size. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* hostapd: ubus: fix uninitialized pointerDavid Bauer2021-10-211-1/+1
| | | | | | | This fixes passing a bogus non-null pointer to the ubus handler in case the transition request is rejected. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: use correct USB package for DIR-505David Bauer2021-10-211-1/+1
| | | | | | | AR9331 requires kmod-usb2-chipidea to use the USB ports. Include the correct package so they can be used with the base image. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: fix up patches after the last commitFelix Fietkau2021-10-214-8/+8
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix a race condition on adding AP mode wds sta interfacesFelix Fietkau2021-10-212-1/+23
| | | | | | | | | | Both hostapd and netifd attempt to add a VLAN device to a bridge. Depending on which one wins the race, bridge vlan settings might be incomplete, or hostapd might run into an error and refuse to service the client. Fix this by preventing hostapd from adding interfaces to the bridge and instead rely entirely on netifd handling this properly Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2021-10-211-3/+3
| | | | | | | c61a1d432b34 wireless: fix creating AP mode WDS station interfaces f78bdec2ed5f wireless: fix handling vif attributes on reload with mode change Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: 5.10: backport Marvell 88E1510/2 PHY SFP supportRobert Marko2021-10-212-0/+710
| | | | | | | | | | | | | Backport upstream SFP support for the Marvell 88E1510/2 PHY-s. Globalscale MOCHAbin uses this PHY for the hybrid WAN port that has 1G SFP and 1G RJ45 with PoE PD connected to it. This allows the SFP port to be used on it as well as parsing the SFP module details with ethtool. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* kernel: 5.10: backport 100 BaseX SFP supportRobert Marko2021-10-213-1/+97
| | | | | | | | | | Backport upstream support for 100Base-FX, 100Base-LX, 100Base-PX and 100Base-BX10 SFP modules. This is a prerequisite for the Globalscale MOCHAbin hybrid 1G SFP/Copper support backporting. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ltq-vdsl-app: add error vector counters to the ubus metricsAndre Heider2021-10-211-0/+23
| | | | | | | | | | | | | | | These are useful stats to debug vector related line deteriorations, see [0]. Example output: "erb": { "sent": 169925, "discarded": 0 } [0] https://forum.openwrt.org/t/vectoring-on-lantiq-vrx200-vr9-missing-callback-for-sending-error-samples/104046 Signed-off-by: Andre Heider <a.heider@gmail.com>
* ltq-vdsl-app: prepare for multiple mei ioctlsAndre Heider2021-10-212-19/+23
| | | | | | | | | | | | Refactor so that the outer function opens and closes the mei fd and passes it around, just as with the main fd. That also allows us to use the IOCTL macro in get_vector_status() and clean up accordingly. Switch to AUTORELEASE while at it. Signed-off-by: Andre Heider <a.heider@gmail.com>
* ath10k-ct: update to version from 2021-09-22Andrew Robbins2021-10-213-10/+5
| | | | | | | | Add in a fix for 160Mhz dfs on 5.10 and higher. Add support for 5.13 and 5.15 kernels. Add of_get_mac_address support for 5.15 driver. Signed-off-by: Andrew Robbins <andrew@robbinsa.me>
* kernel: bump 5.10 to 5.10.75Rui Salvaterra2021-10-2118-67/+24
| | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0735-xhci-guard-accesses-to-ep_state-in-xhci_endpoint_res.patch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=dc3e0a20dbb9dbaa22f4a33dea34230f8c663c40 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.74Rui Salvaterra2021-10-2118-19/+19
| | | | | | Patches automatically refreshed. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.73Rui Salvaterra2021-10-213-20/+7
| | | | | | Patches automatically refreshed. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.155John Audia2021-10-219-15/+15
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.154John Audia2021-10-2123-24/+24
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.153John Audia2021-10-2126-1701/+51
| | | | | | | | | Removed upstreamed: backport-5.4/070-v5.5-MIPS-BPF-Restore-MIPS32-cBPF-JIT.patch All other patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* wolfssl: fix compile when enable-devcrypto is setIvan Pavlov2021-10-211-0/+22
| | | | | | | fixing linking error when --enable-devcrypto=yes fixes: 7d92bb050961 wolfssl: update to 4.8.1-stable Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
* iw: sync nl80211 with kernel backportsHauke Mehrtens2021-10-211-13/+56
| | | | | | | | The nl80211 was out of sync with the version used in our backports. This broke the configuration of the antenna gain. Fixes: 2bfac61483db ("mac80211: backport support for BSS color changes") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* realtek: switch to kernel 5.10Adrian Schmutzler2021-10-201-2/+1
| | | | | | | The usual testers did their tests. Now we need testers who use the master builds. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: add missing patch chunk for mac80211_hwsimFelix Fietkau2021-10-202-4/+42
| | | | | | Fixes build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-10-204-167/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ebf5b2336591 mt7615/mt7915: fix hwmon device name 8d12f9ed275d mt76: mt7615: mt7622: fix ibss and meshpoint e7883cdc0b4e mt76: mt7915: improve code readability in mt7915_mcu_sta_bfer_ht 831d5967abb9 wireless: fix spelling of A-MSDU in HE capabilities f09cb04be261 wireless: align some HE capabilities with the spec 0eeba8f2952d wireless: align HE capabilities A-MPDU Length Exponent Extension 655a6c65b8a7 mt76: mt7915: introduce mt7915_mcu_beacon_check_caps() 4440025d0ba9 mt76: mt7915: fix txbf starec TLV issues 87d2fb6fbff5 mt76: mt7915: improve starec readability of txbf 53c6a3cb7f6b mt76: mt7915: fix sta_rec_wtbl tag len f517845e4f28 mt76: mt7915: rework starec TLV tags 1df017bc39a3 mt76: mt7915: fix muar_idx in mt7915_mcu_alloc_sta_req() 6724b0a9a748 mt76: mt7915: set VTA bit in tx descriptor f1f505cbbb30 mt76: mt7915: set muru platform type 8c9d4b38d258 mt76: mt7915: remove dead code in mt7915_get_et_stats d0ccc4297935 mt76: rely on phy pointer in mt76_register_debugfs_fops routine signature 0af0af82bb97 mt76: mt7915: introduce mt76 debugfs sub-dir for ext-phy 10e85d62f213 mt76: mt7915: improve code readability for xmit-queue handler b6051f7713d2 mt76: sdio: export mt76s_alloc_rx_queue and mt76s_alloc_tx routines 9a97c38a309d mt76: mt7921: get rid of unused variable in mt7921_tx_complete_skb c02847c05884 mt76: mt7921: get rid of unused variable in mt7921_mac_tx_free 60dd47a0a62e mt76: mt7915: remove dead code in debugfs code ce74fc020d81 mt76: mt7921: add MU EDCA cmd support c062f6920356 mt76: mt7921: refactor mac.c to be bus independent bfa909c833e8 mt76: mt7921: refactor dma.c to be pcie specific 6556bddf26d2 mt76: mt7921: refactor mcu.c to be bus independent 1c8418207c86 mt76: mt7921: refactor init.c to be bus independent 6cf8248c1a44 mt76: mt7921: add MT7921_COMMON module 77600b0c10ac mt76: connac: move mcu reg access utility routines in mt76_connac_lib module 65362a00d07d mt76: mt7663s: rely on mcu reg access utility 956206bb55c3 mt76: mt7921: make all event parser reusable between mt7921s and mt7921e f0dedcf6aaf0 mt76: mt7921: use physical addr to unify register access 5079d5b0b13c mt76: sdio: move common code in mt76_sdio module 26257594398b mt76: sdio: introduce parse_irq callback e353424f1b07 mt76: sdio: extend sdio module to support CONNAC2 ddab3dd25f94 mt76: connac: extend mcu_get_nic_capability b2d9a1748a41 mt76: mt7921: rely on mcu_get_nic_capability e6ce5d9cbda0 mt76: mt7921: refactor mt7921_mcu_send_message ce3706a65ccd mt76: mt7921: introduce mt7921s support 3143118baf53 mt76: mt7921s: add reset support 645eac64bece mt76: mt76x0: correct VHT MCS 8/9 tx power eeprom offset d54796787cb7 mt76: move mt76_sta_stats in mt76.h 094e085abf5a mt76: move mt76_ethtool_worker_info in mt76 module f80ab6dde63d mt76: mt7915: run mt7915_get_et_stats holding mt76 mutex 4a11cb67dc27 mt76: mt7915: move tx amsdu stats in mib_stats 486da6fa2512 mt76: do not reset MIB counters in get_stats callback d8837b7c8dcd mt76: mt7921: add some more MIB counters 5ffe086fcd1b mt76: mt7921: introduce stats reporting through ethtool 69154ae23f6b mt76: mt7921: add sta stats accounting in mt7921_mac_add_txs_skb 4b65fbc4e203 mt76: mt7921: move tx amsdu stats in mib_stats 35b8025f466b mt76: mt7921: add per-vif counters in ethtool cfbbd861eb12 mt76: mt7915: enable HE UL MU-MIMO a0b94987df80 mt76: mt7915: rework mt7915_mcu_sta_muru_tlv() 5fbb686e9c0c mt76: mt7915: fix missing HE phy cap b649678c18ca mt76: mt7915: change max rx len limit of hw modules Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport a few trivial patchesFelix Fietkau2021-10-206-0/+579
| | | | | | | No functional changes, just some renames to make it easier to keep mt76 in sync with upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/llvm-bpf: add llvm+clang build suitable for compiling code to eBPFFelix Fietkau2021-10-203-0/+45
| | | | | | Preparation for building packages that ship eBPF code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* include/cmake.mk: fix host builds with CMAKE_BINARY_SUBDIRFelix Fietkau2021-10-201-4/+6
| | | | | | Use it in the same way as for target builds Signed-off-by: Felix Fietkau <nbd@nbd.name>
* README: mention video feedPaul Spooren2021-10-191-0/+3
| | | | | | | | | The video feed just got support for Wayland which allows OpenWrt devices to run as a Kiosk (displaying browser content via a display). The availability of these packages should be mentioned to users. Signed-off-by: Paul Spooren <mail@aparcar.org>
* ncurses: add tmux terminfoJitao Lu2021-10-191-1/+3
| | | | | | | | | | They're preferred terminal descriptions for tmux, with additional support to some special characters and italic fonts. More info can be found at: https://github.com/tmux/tmux/wiki/FAQ Fixes: FS#3404 Signed-off-by: Jitao Lu <dianlujitao@gmail.com>
* hostapd: fix goto loop for ubus assoc handlerDavid Bauer2021-10-191-8/+7
| | | | | | | | | | When a ubus event handler denies a association with a non-zero return value, the code jumps to preceeding code, creating an endless loop until the event handler accepts the assc request. Move the ubus handler further up the code to avoid creating such a loop. Signed-off-by: David Bauer <mail@david-bauer.net>
* wireguard-tools: add uci option to disable wireguard peersStepan Henek2021-10-183-1/+16
| | | | | | | | | | | | | Right now when I want to temporarily disable wg peer I need to delete the entire peer section. This is not such a good solution because I loose the previous configuration of the peer. This patch adds `disabled` option to peer config which causes that the config section is ignored. Signed-off-by: Stepan Henek <stepan.henek@nic.cz> [use $(AUTORELEASE)] Signed-off-by: Paul Spooren <mail@aparcar.org>
* nftables: bump to 1.0.0Stijn Tintel2021-10-191-3/+3
| | | | | | | | This introduces support for hardware flow offloading, which was added in in nftables 0.9.9. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Jo-Philipp Wich <jo@mein.io>
* tegra: switch to kernel 5.10Adrian Schmutzler2021-10-181-2/+1
| | | | | | | | This target has testing support for kernel 5.10 for four months now. Time to switch the default. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* bcm53xx: enable Linksys EA6300 & EA9200 buildsRafał Miłecki2021-10-181-3/+0
| | | | | | | | | | Both should be supported since: 1. Adding NVMEM driver for NVRAM 2. Using NVRAM info for determining active firmware partition Linksys EA9500 uses very similar design and works fine. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* procd: update to git HEADDaniel Golle2021-10-171-3/+3
| | | | | | | | | 9b1e035 jail: netifd: code cosmetics d2a2ecc jail: netifd: fix error handling issue reported by coverity e1d7cee jail: netifd: check target netns fd before using it 59f7699 uxc: add missing 'break' statement Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* wolfssl: remove --enable-sha512 configure switchAndre Heider2021-10-171-2/+2
| | | | | | | | | | It's the default anyway and this just looks confusing, as if it wasn't. Switch to AUTORELEASE while at it. The binary size is unchanged. Signed-off-by: Andre Heider <a.heider@gmail.com>
* wolfssl: always build with --enable-reproducible-buildAndre Heider2021-10-171-0/+1
| | | | | | | | | | | This gates out anything that might introduce semantically frivolous jitter, maximizing chance of identical object files. The binary size shrinks by 8kb: 1244352 staging_dir/target-mipsel_24kc_musl/usr/lib/libwolfssl.so.4.8.1.39c36f2f 1236160 staging_dir/target-mipsel_24kc_musl/usr/lib/libwolfssl.so.4.8.1.39c36f2f Signed-off-by: Andre Heider <a.heider@gmail.com>
* wolfssl: build with WOLFSSL_ALT_CERT_CHAINSAndre Heider2021-10-171-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | "Alternate certification chains, as oppossed to requiring full chain validataion. Certificate validation behavior is relaxed, similar to openssl and browsers. Only the peer certificate must validate to a trusted certificate. Without this, all certificates sent by a peer must be used in the trust chain or the connection will be rejected." This fixes e.g. uclient-fetch and curl connecting to servers using a Let's Encrypt certificate which are cross-signed by the now expired DST Root CA X3, see [0]. This is the recommended solution from upstream [1]. The binary size increases by ~12.3kb: 1236160 staging_dir/target-mipsel_24kc_musl/usr/lib/libwolfssl.so.4.8.1.39c36f2f 1248704 staging_dir/target-mipsel_24kc_musl/usr/lib/libwolfssl.so.4.8.1.39c36f2f [0] https://github.com/openwrt/packages/issues/16674 [1] https://github.com/wolfSSL/wolfssl/issues/4443#issuecomment-934926793 Signed-off-by: Andre Heider <a.heider@gmail.com> [bump PKG_RELEASE] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: remove kmod-mt7663-firmware-sta from device packagesFelix Fietkau2021-10-171-3/+3
| | | | | | | | This firmware should only be used for mobile devices (e.g. laptops), where AP mode functionality is typically not used. This firmware supports a lot of power saving offload functionality at the expense of AP mode support. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix dtc warnings for telco-electronics_x1Rosen Penev2021-10-171-16/+17
| | | | | | | In all other dts files, the entire block is not edited like this. They're edited separately. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* zynq: switch to kernel 5.10Luis Araneda2021-10-171-1/+1
| | | | | | | | | Use kernel 5.10 by default compile-tested: all devices from target (wth ALL_KMODS) run-tested: Digilent Zybo Z7-20 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: kernel: update config for 5.10Luis Araneda2021-10-171-11/+13
| | | | | | Update config with make kernel_oldconfig Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: kernel: copy config from 5.4 to 5.10Luis Araneda2021-10-171-0/+550
| | | | Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: kernel: remove wireless extensions symbolsLuis Araneda2021-10-171-3/+0
| | | | | | | | | | | | This fixes compilation of several wireless drivers that require support for the old wireless extension to work. One example is kmod-hermes. The symbols are set to "y" on generic configuration. But they were wrongly disabled on the target-specific configuration. Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: kernel: refresh configLuis Araneda2021-10-171-94/+2
| | | | | | | | using "make kernel_oldconfig" Several configs are now part of generic Signed-off-by: Luis Araneda <luaraneda@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 21:17:52 +0000