aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: combine UniFi AC dual firmware-partitionsDavid Bauer2023-01-072-8/+3
| | | | | | | | | | | | | | | In order to maximize the available space on UniFi AC boards using a dual-image partition layout, combine the two OS partitions into a single partition. This allows users to access more usable space for additional packages. Don't limit the usable image size to the size of a single OS partition. The initial installation has to be done with an older version of OpenWrt in case the generated image exceeds the space of a single kernel partition in the future. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: combine USW-Flex dual firmware-partitionsDavid Bauer2023-01-072-7/+3
| | | | | | | | | | | | | | | In order to maximize the available space on USW-Flex boards using a dual-image partition layout, combine the two OS partitions into a single partition. This allows users to access more usable space for additional packages. Don't limit the usable image size to the size of a single OS partition. The initial installation has to be done with an older version of OpenWrt in case the generated image exceeds the space of a single kernel partition in the future. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: combine OCEDO dual firmware-partitionsDavid Bauer2023-01-074-24/+9
| | | | | | | | | | | | | | | In order to maximize the available space on OCEDO boards using a dual-image partition layout, combine the two OS partitions into a single partition. This allows users to access more usable space for additional packages. Don't limit the usable image size to the size of a single OS partition. The initial installation has to be done with an older version of OpenWrt in case the generated image exceeds the space of a single OS partition in the future. Signed-off-by: David Bauer <mail@david-bauer.net>
* treewide: update NVMEM symbolsRafał Miłecki2023-01-079-11/+11
| | | | | Fixes: 8dfe69cdfc5c ("kernel: update nvmem subsystem to the latest upstream") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: update nvmem subsystem to the latest upstreamRafał Miłecki2023-01-0695-40/+7448
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mvebu: harmonize GL.iNet GL-MV1000 MTD partitions layout with vendorEnrico Mioso2023-01-061-1/+19
| | | | | | | The GL-MV1000 ships with a 16MB spi-nor flash, containing a copy of the stock GL.iNet firmware. Add the corresponding flash areas, so our view matches the one of the in-flash stock firmware. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
* octeontx: add sqaushfs and ramdisk to featuresTim Harvey2023-01-061-1/+1
| | | | | | | Add squashfs and ramdisk to features as these are commonly used images for the octeontx. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ramips: add support for Cudy M1800Leon M. Busch-George2023-01-063-4/+192
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications SoC: MT7621 CPU: 880 MHz Flash: 32 MiB RAM: 256 MiB WLAN: MT7915 WiFi 6 (2.4/5 GHz) Ethernet: 2x Gbit ports MAC LAN b4:4b:d6:2e:c7:b0 (label) WAN b4:4b:d6:2e:c7:b1 WiFi 2.4 00:0c:43:26:46:08 WiFi 5 00:0c:43:26:59:97 Installation There are two known options: 1) The Luci-based UI. 2) Press and hold the reset button during power up. The router will request 'recovery.bin' from a TFTP server at 192.168.1.88. Both options require a signed firmware binary. The openwrt image supplied by cudy is signed and can be used to install unsigned images. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* kernel: add patch to support en25qh256aLeon M. Busch-George2023-01-066-4/+102
| | | | | | | | | | | | | The EN25QH256A variant of the EN25QH256 doesn't initialize correctly from SFDP alone and only accesses memory below 8m (addr_width is 4 but read_opcode takes only 3 bytes). Set SNOR_F_4B_OPCODES if the flash chip variant was detected using hwcaps. The fix submitted upstream uses the PARSE_SFDP initializer that is not available in the kernel used with Openwrt. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* ath79: tiny: Do not build TPLink WPA8630Pv2 by defaultJoe Mullally2023-01-061-0/+1
| | | | | | | | | | 22.03.1+ and snapshot builds no longer fit the 6M flash space available for these models. This disables failing buildbot image builds for these devices. Images can still be built manually with ImageBuilder. Signed-off-by: Joe Mullally <jwmullally@gmail.com>
* target/imagebuilder: add help text and rename whatdepends to package_whatdepensFlorian Eckert2023-01-061-2/+10
| | | | | | | Add the command `package_whatdepends` to show all package that have a dependency to this packages. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* target/imagebuilder: update help text for manifest targetFlorian Eckert2023-01-061-1/+2
| | | | | | | - Add a help text for the manifest command. - Unify command detail help text to use `manifest`. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* target/imagebuilder: change help text for image buildFlorian Eckert2023-01-061-1/+1
| | | | | | Using command `image` to unify help text. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* target/imagebuilder: add depends target to show all package that gets installedFlorian Eckert2023-01-061-1/+17
| | | | | | | | This commits adds the makefile targets `depends` this wrapper is a call to `opkg depends`. This command shows which runtime dependencies exist if this package is installed into the image. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ath79: convert UBNT Aircube AC WiFis to nvmem-cellsStefan Kalscheuer2023-01-062-13/+26
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Merge art into partition node. Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
* tools/llvm: update to 15.0.6Linhui Liu2023-01-061-4/+2
| | | | | | | | | | | | | | | Release Notes: https://discourse.llvm.org/t/llvm-15-0-0-release/65099 https://discourse.llvm.org/t/llvm-15-0-1-released/65380 https://discourse.llvm.org/t/llvm-15-0-2-released/65695 https://discourse.llvm.org/t/llvm-15-0-3-released/66036 https://discourse.llvm.org/t/llvm-15-0-4-released/66337 https://discourse.llvm.org/t/llvm-15-0-5-release/66616 https://discourse.llvm.org/t/llvm-15-0-6-released/66899 Remove HOST_BUILD_PARALLEL as it's default now. Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* ramips: add support for Keenetic KN-1613Maxim Anisimov2023-01-064-4/+246
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keenetic KN-1613 is a 2.4/5 Ghz band 11ac (Wi-Fi 5) router, based on MT7628AN. Specification: - System-On-Chip: MT7628AN - CPU/Speed: 580 MHz - Flash-Chip: Winbond w25q256 - Flash size: 32768 KiB - RAM: 128 MiB - 4x 10/100 Mbps Ethernet - 2x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - Wireless No1 (2T2R): SoC Built-in 2.4 GHz 802.11bgn - Wireless No2 (2T2R): MT7613BE 5 GHz 802.11ac - 4x LED, 2x button, 1x mode switch Notes: - The device supports dual boot mode - The firmware partitions were concatinated into one - The FN button led indicator has been reassigned as the 2.4GHz wifi indicator. Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-ramips-mt76x8-keenetic_kn-1613-squashfs-factory.bin" to "KN-1613_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed until power led start blinking. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
* ramips: enable mtd virtual concat support for mt76x8 subtargetMaxim Anisimov2023-01-062-0/+2
| | | | | | This is required for upcoming Keenetic KN-1613 support Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
* tcpdump: update to 4.99.2Nick Hainke2023-01-063-36/+37
| | | | | | | | | | | | | | | | | | | | | | | Update to latest version. For release information look into CHANGES file [0]. Automatically refreshed: - 001-remove_pcap_debug.patch Manually refreshed: - 100-tcpdump_mini.patch old ipkg sizes: 316554 bin/packages/mips_24kc/base/tcpdump_4.99.1-1_mips_24kc.ipk 141457 bin/packages/mips_24kc/base/tcpdump-mini_4.99.1-1_mips_24kc.ipk new ipkg sizes: 318089 bin/packages/mips_24kc/base/tcpdump_4.99.2-1_mips_24kc.ipk 141941 bin/packages/mips_24kc/base/tcpdump-mini_4.99.2-1_mips_24kc.ipk [0] - https://github.com/the-tcpdump-group/tcpdump/blob/master/CHANGES Signed-off-by: Nick Hainke <vincent@systemli.org>
* libpcap: update to 1.20.2Nick Hainke2023-01-065-46/+20
| | | | | | | | | | | | | | | | | | | | | | | | | A huge rewrite in libpcap was introduced by dc14a7babca1 ("rpcap: have the server tell the client its byte order.") [0]. The patch "201-space_optimization.patch" does not apply at all anymore. So remove it. Refresh: - 100-no-openssl.patch - 102-skip-manpages.patch Update the "300-Add-support-for-B.A.T.M.A.N.-Advanced.patch" with latest PR [1]. old ipkg size: 90964 bin/packages/mips_24kc/base/libpcap1_1.10.1-5_mips_24kc.ipk new ipkg size: 93340 bin/packages/mips_24kc/base/libpcap1_1.10.2-1_mips_24kc.ipk [0] - https://github.com/the-tcpdump-group/libpcap/commit/dc14a7babca1471809bee6872539ff836937840e [1] - https://github.com/the-tcpdump-group/libpcap/pull/980 Signed-off-by: Nick Hainke <vincent@systemli.org>
* nftables: update to 1.0.6Nick Hainke2023-01-062-27/+4
| | | | | | | | | | | | | | | | | | Remove upstreamed patches: - 0001-fix-nft.patch Upstream switched to "tar.xz" archives. old ipkg size: 273678 bin/packages/mips_24kc/base/nftables-json_1.0.5-2_mips_24kc.ipk new ipkg size: 271624 bin/packages/mips_24kc/base/nftables-json_1.0.6-1_mips_24kc.ipk Release Information: https://netfilter.org/projects/nftables/files/changes-nftables-1.0.6.txt Signed-off-by: Nick Hainke <vincent@systemli.org>
* generic: fix silicon labs spidev bindingsVincent Tremblay2023-01-0610-40/+111
| | | | | | | | | | | | | | | Fix Silicon Labs bindings in the spidev driver Some bindings for Silicon Labs chips already exists upstream. These bindings can be found in trivial-devices.yaml. The existing bindings are using "silabs" instead of "siliconlabs" to identify the manufacturer. This commit add two submitted patches for silabs chips and rename the manufacturer in the different DTS for more coherence. Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
* ath79: add support for Fortinet FAP-221-BMichael Pratt2023-01-068-0/+252
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FCC ID: U2M-CAP4100AG Fortinet FAP-221-B is an indoor access point with 1 Gb ethernet port, dual-band wireless, internal antenna plates, and 802.3at PoE+ Hardware and board design from Senao **Specification:** - AR9344 SOC 2G 2x2, 5G 2x2, 25 MHz CLK - AR9382 WLAN 2G 2x2 PCIe, 40 MHz CLK - AR8035-A PHY RGMII, PoE+ IN, 25 MHz CLK - 16 MB FLASH MX25L12845EMI-10G - 2x 32 MB RAM W9725G6JB-25 - UART at J11 populated, 9600 baud - 6 LEDs, 1 button power, ethernet, wlan, reset Note: ethernet LEDs are not enabled because a new netifd hotplug is required in order to operate like OEM. Board has 1 amber and 1 green for each of the 3 case viewports. **MAC addresses:** 1 MAC Address in flash at end of uboot ASCII encoded, no delimiters Labeled as "MAC Address" on case OEM firmware sets offsets 1 and 8 for wlan eth0 *:1e uboot 0x3ff80 phy0 *:1f uboot 0x3ff80 +1 phy1 *:26 uboot 0x3ff80 +8 **Serial Access:** Pinout: (arrow) VCC GND RX TX Pins are populated with a header and traces not blocked. Bootloader is set to 9600 baud, 8 data, 1 stop. **Console Access:** Bootloader: Interrupt boot with Ctrl+C Press "k" and enter password "1" OR Hold reset button for 5 sec during power on Interrupt the TFTP transfer with Ctrl+C to print commands available, enter "help" OEM: default username is "admin", password blank telnet is available at default address 192.168.1.2 serial is available with baud 9600 to print commands available, enter "help" or tab-tab (busybox list of commands) **Installation:** Use factory.bin with OEM upgrade procedures OR Use initramfs.bin with uboot TFTP commands. Then perform a sysupgrade with sysupgrade.bin **TFTP Recovery:** Using serial console, load initramfs.bin using TFTP to boot openwrt without touching the flash. TFTP is not reliable due to bugged bootloader, set MTU to 600 and try many times. If your TFTP server supports setting block size, higher block size is better. Splitting the file into 1 MB parts may be necessary example: $ tftpboot 0x80100000 image1.bin $ tftpboot 0x80200000 image2.bin $ tftpboot 0x80300000 image3.bin $ tftpboot 0x80400000 image4.bin $ tftpboot 0x80500000 image5.bin $ tftpboot 0x80600000 image6.bin $ bootm 0x80100000 **Return to OEM:** The best way to return to OEM firmware is to have a copy of the MTD partitions before flashing Openwrt. Backup copies should be made of partitions "fwconcat0", "loader", and "fwconcat1" which together is the same flash range as OEM's "rootfs" and "uimage" by loading an initramfs.bin and using LuCI to download the mtdblocks. It is also possible to extract from the OEM firmware upgrade image by splitting it up in parts of lengths that correspond to the partitions in openwrt and write them to flash, after gzip decompression. After writing to the firmware partitions, erase the "reserved" partition and reboot. **OEM firmware image format:** Images from Fortinet for this device ending with the suffix .out are actually a .gz file The gzip metadata stores the original filename before compression, which is a special string used to verify the image during OEM upgrade. After gzip decompression, the resulting file is an exact copy of the MTD partitions "rootfs" and "uimage" combined in the same order and size that they appear in /proc/mtd and as they are on flash. OEM upgrade is performed by a customized busybox with the command "upgrade". Another binary, "restore" is a wrapper for busybox's "tftp" and "upgrade". Signed-off-by: Michael Pratt <mcpratt@pm.me>
* image: add gzip-filename build recipeMichael Pratt2023-01-062-0/+11
| | | | | | | | | | Some vendors use basic gzip metadata (original filename and timestamp) to verify valid images, along with the size of it's contents. Also, add a new device profile variable FACTORY_IMG_NAME which would be ideal to use with this new recipe. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* base-files: rework mtd_get_mac_text()Michael Pratt2023-01-061-11/+5
| | | | | | | | | | | | | | It's necessary to be able to specify the length for MAC addresses that are stored in flash, for example, in a case where it is stored without any delimiter. Let both offset and length have default values. Add a sanity check related to partition size. Also, clean up syntax and unnecessary lines. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: allow skipping hash for Senao sysupgradeMichael Pratt2023-01-064-28/+30
| | | | | | | | | | | | | | Some vendors of Senao boards have a similar flash layout situation that causes the need to split the firmware partition and use the lzma-loader, but do not store checksums of the partitions or otherwise do not even have a uboot environment partition. This adds simple shell logic to skip that part. Also, simplify some lines and variable usage. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: use lzma-loader for Senao initramfs imagesMichael Pratt2023-01-061-0/+1
| | | | | | | | | Some vendors of Senao boards have put a bootloader that cannot handle both large gzip or large lzma files. There is no disadvantage by doing this for all of them. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* github: add command for deviceChristian Schmidbauer2023-01-061-1/+3
| | | | | | This adds a command to the issue template to simplify the "device" name reporting. Signed-off-by: Christian Schmidbauer <github@grische.xyz>
* kernel: 5.10: update nvmem subsystem to the 5.15 stateRafał Miłecki2023-01-0631-15/+1733
| | | | | | | This allows cleanly backporting more recent stuff that's important for OpenWrt. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 5.10 to 5.10.162John Audia2023-01-062-3/+3
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* realtek: 5.15: Improve error handling in rtl838x_pie_rule_write()Pascal Ernster2023-01-051-6/+10
| | | | | | | In target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c, make rtl838x_pie_rule_write() return non-zero value case of error. Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: 5.15: Improve rtl838x dsa driver error handlingPascal Ernster2023-01-051-24/+32
| | | | | | | | | Make sure functions calling rtl838x_smi_wait_op() return its return value in target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c. This brings the code style in line with the rtl839x implementation. Suggested-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: return correct error value for phy opsPascal Ernster2023-01-051-2/+2
| | | | | | | | | | | | | | | | | | | | | A behavioural change was introduced with commit 758c88b96963 ("realtek: Whitespace and codestyle cleanup") causing rtl838x_read_phy() and rtl838x_write_phy() to unconditionally return -ETIMEDOUT. As a result, probing the device during boot fails: Error setting up netdev, freeing it again. rtl838x-eth: probe of 1b00a300.ethernet failed with error -5 Fix the bootloop caused by this regression with kernel 5.15 on rtl838x devices, by properly returning 0 on success. Tested on a Netgear GS108T v3, a Netgear GS310TP v1, a Zyxel GS1900-8HP v1 and an HPE 1920-8G. Fixes: 758c88b969639d0e6b684669d2e54dd1be3102f4 ("realtek: Whitespace and codestyle cleanup") Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: Migrate to upstream generic MIPS addressesOlliver Schinagl2023-01-053-4/+4
| | | | | | | | | | Upstream generic MIPS uses 0x80100000 and 0x80100400 for the LOADADDR and ENTRY addresses. As we do not want to diverge from upstream and patch upstream when not needed, adjust our addresses as well to be future proof. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Tested-by: Jan Hoffmann <jan@3e8.eu> # HPE 1920-8G, HPE 1920-48G
* ncurses: update to 6.4Linhui Liu2023-01-056-21/+21
| | | | | | Update to the latest released version. Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* ramips: add Unielec U7621-06 32M build targetIgnas Poklad2023-01-052-0/+90
| | | | | | | | | Add 32M build target Rest of the details as per commit 46ab81e405d2 ("ramips add support for UniElec U7621-06") Signed-off-by: Ignas Poklad <ignas2526@gmail.com>
* ath79: convert Netgear WNDAP360 WiFis to nvmem-cellsNick Hainke2023-01-043-31/+32
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Merge art into partition node. Signed-off-by: Nick Hainke <vincent@systemli.org>
* lantiq-xrx200: fix wan LED on o2 box 6431Florian Maurer2023-01-041-1/+4
| | | | | | | | | | | The WIFI LED already worked for me with the latest openwrt 22.03 version. Wifi LED did not with an older 22.x version (in gluon - there phy0radio did nothing but phy0tpt did show activity the WAN interface has the name "wan" and not "pppoe-wan" on this device fixes #7757 (and FS#2987) Signed-off-by: Florian Maurer <f.maurer@outlook.de>
* toolchain/nasm: update to 2.16.01Linhui Liu2023-01-041-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ChangeLog: Version 2.16.01 _This is a documentation update release only._ (*) Fix the creation of the table of contents in the HTML version of the documentation. Version 2.16 (*) Support for the `rdf' format has been discontinued and all the RDOFF utilities has been removed. (*) The `--reproducible' option now leaves the filename field in the COFF object format blank. This was always rather useless since it is only 18 characters long; as such debug formats have to carry their own filename information anyway. (*) Fix handling of MASM-syntax reserved memory (e.g. `dw ?') when used in structure definitions. (*) The preprocessor now supports functions, which can be less verbose and more convenient than the equivalent code implemented using directives. See section 4.4. (*) Fix the handling of `%00' in the preprocessor. (*) Fix incorrect handling of path names affecting error messages, dependency generation, and debug format output. (*) Support for the RDOFF output format and the RDOFF tools have been removed. The RDOFF tools had already been broken since at least NASM 2.14. For flat code the ELF output format recommended; for segmented code the `obj' (OMF) output format. (*) New facility: preprocessor functions. Preprocessor functions, which are expanded similarly to single-line macros, can greatly simplify code that in the past would have required a lengthy list of directives and intermediate macros. See section 4.4. (*) Single-line macros can now declare parameters (using a `&&' prefix) that creates a quoted string, but does _not_ requote an already quoted string. See section 4.2.1. (*) Instruction table updated per public information available as of November 2022. (*) All warnings in the preprocessor have now been assigned warning classes. See appendix A. (*) Fix the invalid use of `RELA'-type relocations instead of `REL'- type relocations when generating DWARF debug information for the `elf32' output format. (*) Fix the handling `at' in `istruc' when the structure contains local labels. See section 5.9.2. (*) When assembling with `--reproducible', don't encode the filename in the COFF header for the `coff', `win32' or `win64' output formats. The COFF header only has space for an 18-character filename, which makes this field rather useless in the first place. Debug output data, if enabled, is not affected. (*) Fix incorrect size calculation when using MASM syntax for non- byte reservations (e.g. `dw ?'.) (*) Allow forcing an instruction in 64-bit mode to have a (possibly redundant) REX prefix, using the syntax `{rex}' as a prefix. (*) Add a `{vex}' prefix to enforce VEX (AVX) encoding of an instruction, either using the 2- or 3-byte VEX prefixes. (*) The `CPU' directive has been augmented to allow control of generation of VEX (AVX) versus EVEX (AVX-512) instruction formats, see section 7.11. (*) Some recent instructions that previously have been only available using EVEX encodings are now also encodable using VEX (AVX) encodings. For backwards compatibility these encodings are not enabled by default, but can be generated either via an explicit `{vex}' prefix or by specifying either `CPU LATEVEX' or `CPU NOEVEX'; see section 7.11. (*) Document the already existing `%unimacro' directive. See section 4.5.12. (*) Fix a code range generation bug in the DWARF debug format (incorrect information in the `DW_AT_high_pc' field) for the ELF output formats. This bug happened to cancel out with a bug in older versions of the GNU binutils linker, but breaks with other linkers and updated or other linkers that expect the spec to be followed. (*) Fix segment symbols with addends, e.g. `jmp _TEXT+10h:0' in output formats that support segment relocations, e.g. the `obj' format. (*) Fix various crashes and hangs on invalid input. Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* ramips: enable Wi-Fi LED support for Afoundry EW1200Shiji Yang2023-01-041-2/+14
| | | | | | Add LED properties to PCIe node to enable Wi-Fi LED support. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: enable Wi-Fi LED support for Zbtlink ZBT-WE1326Shiji Yang2023-01-041-2/+14
| | | | | | Add LED properties to PCIe node to enable Wi-Fi LED support. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add basic support for tp-link er605-v2Nikolay Martynov2023-01-045-0/+224
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a MT7621-based device with 128MB NAND flash, 256MB RAM, and a USB port. The board has headers to attach console. In order for them to work two solder bridges near those pads need to be made. The defice has the following partition table: ``` 0x000000000000-0x000000080000 : "u-boot" 0x000000080000-0x000000100000 : "u-boot-env" 0x000000100000-0x000000140000 : "factory" 0x000000140000-0x000007e00000 : "firmware" 0x000007e00000-0x000008000000 : "panic-ops" ``` `firmware` partition contains UBI volumes. Unfortunately I accidentally wiped partition and I no longer have access to it. `firmware` partition contains 'secondary' U-Boot which is run by 'first' u-boot. It also contains various configuration partitions that include device info and MAC address. There also seems to be 'primary' and 'backup' set of 'main' volumes. U-boot has `mtkupgrade` command that just overrides data on firmware partitions. Firmware file provided by TP-Link cannot be used with that command. U-boot also has 'recovery' http server. Unfortunately I was not able to make it work with manufacturer's firmware. Manufacturer's firmware essentially contains multiple UBI volumes along with 'partition table'. Unfortunately I no longer can properly run manufacturer's firmware so I cannot at the moment try to a support for building 'factory' images. This patch adds support for initramfs image as well as sysupgrade image. This seems to be pretty standard MT7621 board otherwise. Things that work: * network * leds * usb * factory MAC detection Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
* ramips: add missing LEDs to Asus RT-AX53UMarian Sarcinschi2023-01-043-3/+19
| | | | | | | | | | | | | | | | This patch adds the missing LEDs to Asus RT-AX53U. Based on PR #10400 and patch provided in #11068 - enable the two LEDs controlled by mt7915e for wireless; - add label to power LED so it works properly and fix formatting; - add the USB LED; - switch LEDs are best left to be controlled by hardware for now. Co-Authored-By: Ivan Rozhuk <rozhuk.im@gmail.com> Co-Authored-By: Shiji Yang <yangshiji66@qq.com> Co-Authored-By: Hartmut Birr <e9hack@gmail.com> Tested-by: Felix Baumann <felix.bau@gmx.de> Tested-by: Marian Sarcinschi <znevna@gmail.com> Signed-off-by: Marian Sarcinschi <znevna@gmail.com>
* CI: build: fix external toolchain use with release tag testsChristian Marangi2023-01-041-1/+1
| | | | | | | | | | | | | | When a new tag for a release is created, the just checkout repo from github actions will already have such tag locally created. This will result in git fetch --tags failing with error rejecting the remote tag with (would clobber existing tag). Add -f option to overwrite any local tags and always fetch them from remote. Fixes: e24a1e6f6d7f ("CI: build: add support for external toolchains from stable branch") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: fix wlan mac address for Aruba AP-303HBjoern Dobe2023-01-041-4/+6
| | | | | | | | | | | Assigns the correct mac address from nvmen to the wlan interfaces. This Mac address corresponds to the label "Wireless MAC" on the device and the stock firmware. Removes duplicate entry of calibration variant for both radios. Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjoern Dobe <bjoern@dobecom.de>
* generic: 5.15: backport qca8k fixup for mgmt and mdio read/writeChristian Marangi2023-01-045-0/+531
| | | | | | | | Backport qca8k fixup for mgmt and mdio read/write for kernel 5.15 fixup port dropping and configuration issue. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* generic: 5.10: backport Treat IPv4 segment's lowest address as unicastSeth David Schoen2023-01-041-0/+32
| | | | | | | | | | | | | | | | | | | Backport patch from kernel 5.14. Treat only the highest, not the lowest, IPv4 address within a local subnet as a broadcast address, as subnets do not need two different broadcast addresses and networking documentation consistently prefers the highest address as broadcast. This patch was merged in upstream net-next tree in May 2021 at https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=94c821c74bf5 This eventually frees up one address per subnet. It matches behavior suggested in our Internet-Draft, and also the default behavior of OpenBSD and FreeBSD. Signed-off-by: Seth David Schoen <schoen@loyalty.org>
* kernel: bump 5.15 to 5.15.86John Audia2023-01-0355-226/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.15/101-Use-stddefs.h-instead-of-compiler.h.patch[1] ipq806x/patches-5.15/122-01-clk-qcom-clk-krait-fix-wrong-div2-functions.patch[2] bcm27xx/patches-5.15/950-0198-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch[3] Manually rebased: ramips/patches-5.15/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch[4] Added patch/backported: ramips/patches-5.15/107-PCI-mt7621-Add-sentinel-to-quirks-table.patch[5] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=c160505c9b574b346031fdf2c649d19e7939ca11 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=a051e10bfc6906d29dae7a31f0773f2702edfe1b 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=ec1727f89ecd6f2252c0c75e200058819f7ce47a 4. Quilt gave this output when I applied the patch to rebase it: % quilt push -f Applying patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch patching file arch/mips/ralink/Kconfig patching file drivers/pci/controller/Kconfig patching file drivers/pci/controller/Makefile patching file drivers/staging/Kconfig patching file drivers/staging/Makefile patching file drivers/staging/mt7621-pci/Kconfig patching file drivers/staging/mt7621-pci/Makefile patching file drivers/staging/mt7621-pci/TODO patching file drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt patching file drivers/staging/mt7621-pci/pci-mt7621.c Hunk #1 FAILED at 1. Not deleting file drivers/staging/mt7621-pci/pci-mt7621.c as content differs from patch 1 out of 1 hunk FAILED -- saving rejects to file drivers/staging/mt7621-pci/pci-mt7621.c.rej patching file drivers/pci/controller/pcie-mt7621.c Applied patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch (forced; needs refresh) Upon inspecting drivers/staging/mt7621-pci/pci-mt7621.c.rej, it seems that the original patch wants to delete drivers/staging/mt7621-pci/pci-mt7621.c but upstream's version was not an exact match. I opted to delete that file. 5. Suggestion by hauke: https://github.com/torvalds/linux/commit/19098934f910b4d47cb30251dd39ffa57bef9523 "This patch is in upstream kernel, but it was backported to the old staging driver in kernel 5.15." Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* oxnas: sata_oxnas: use ata_link_errRobert Marko2023-01-031-1/+1
| | | | | | | | | | | | | | Kernel 5.15.86 has backported ("ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros") and this is now causing compilation errors for oxnas SATA driver due to usage of ata_link_printk(). Upstream has migrated to using the appropriate ata_link_{err, warn, notice, info} calls a while ago so its not affected. Lets do the same for oxnas SATA driver and use ata_link_err() instead of ata_link_printk(). Signed-off-by: Robert Marko <robimarko@gmail.com>
* octeontx: add 5.15 testing kernelNick Hainke2023-01-033-14/+24
| | | | | | | | | | Add 5.15 as testing. Refreshed: - 0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 02:20:06 +0000