aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq40xx: fix rebooting after 5.15.111Robert Marko2023-05-181-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kernel 5.15.111 includes backport of commit ("firmware: qcom_scm: Clear download bit during reboot") which is causing reboot on ipq40xx to stop working, more precisely the board will hang after reboot is called with: root@OpenWrt:/# reboot root@OpenWrt:/# [ 76.473541] device lan1 left promiscuous mode [ 76.474204] br-lan: port 1(lan1) entered disabled state [ 76.527975] device lan2 left promiscuous mode [ 76.530301] br-lan: port 2(lan2) entered disabled state [ 76.579376] device lan3 left promiscuous mode [ 76.581698] br-lan: port 3(lan3) entered disabled state [ 76.638434] device lan4 left promiscuous mode [ 76.638777] br-lan: port 4(lan4) entered disabled state [ 76.978489] qca8k-ipq4019 c000000.switch wan: Link is Down [ 76.978883] device eth0 left promiscuous mode [ 76.987077] ipqess-edma c080000.ethernet eth0: Link is Down [ Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00123 S - IMAGE_VARIANT_STRING=DAABANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x00000021 S - Reset status Config, 0x00000010 S - Core 0 Frequency, 0 MHz B - 261 - PBL, Start B - 1339 - bootable_media_detect_entry, Start B - 1679 - bootable_media_detect_success, Start B - 1693 - elf_loader_entry, Start B - 5076 - auth_hash_seg_entry, Start B - 7223 - auth_hash_seg_exit, Start B - 578349 - elf_segs_hash_verify_entry, Start B - 696356 - PBL, End B - 696380 - SBL1, Start B - 787236 - pm_device_init, Start D - 7 - pm_device_init, Delta B - 788701 - boot_flash_init, Start D - 52782 - boot_flash_init, Delta B - 845625 - boot_config_data_table_init, Start D - 3836 - boot_config_data_table_init, Delta - (419 Bytes) B - 852841 - clock_init, Start D - 7566 - clock_init, Delta B - 864883 - CDT version:2,Platform ID:9,Major ID:0,Minor ID:0,Subtype:64 B - 868413 - sbl1_ddr_set_params, Start B - 873402 - cpr_init, Start D - 2 - cpr_init, Delta B - 877842 - Pre_DDR_clock_init, Start D - 4 - Pre_DDR_clock_init, Delta D - 13234 - sbl1_ddr_set_params, Delta B - 891155 - pm_driver_init, Start D - 2 - pm_driver_init, Delta B - 909105 - Image Load, Start B - 1030210 - Boot error ocuured!. Error code: 303d So, until a proper fix is found, lets revert the culprit patch to have reboot working again. Fixes: 228e0e10398b ("kernel: bump 5.15 to 5.15.111") Signed-off-by: Robert Marko <robimarko@gmail.com>
* toolchain: glibc: Fix build with autoconf 2.71Hauke Mehrtens2023-05-181-5/+0
| | | | | | | | | | | | The glibc build was failing with this error message: aclocal.m4:6: error: Exactly version 2.69 of Autoconf is required but you have 2.71 aclocal.m4:6: the top level The autoconf run on glibc is not needed, just remove it. Fixes: #12631 Fixes: 030447b8f4c7 ("tools/autoconf: bump to 2.71") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: glibc: Update glibc 2.37 to recent HEADHauke Mehrtens2023-05-181-2/+2
| | | | | | | | | | | | | | | | | This adds the following changes: 790e504a17 stdlib: Undo post review change to 16adc58e73f3 [BZ #27749] 590d0e089b elf: Restore ldconfig libc6 implicit soname logic [BZ #30125] 1d63573f81 stdio-common: tests: don't double-define _FORTIFY_SOURCE 97ad4c64b9 gshadow: Matching sgetsgent, sgetsgent_r ERANGE handling (bug 30151) 9cc2f41e52 x86_64: Fix asm constraints in feraiseexcept (bug 30305) 78ab913eab posix: Fix system blocks SIGCHLD erroneously [BZ #30163] 5d750495db gmon: Fix allocated buffer overflow (bug 29444) d230623264 gmon: improve mcount overflow handling [BZ# 27576] ff3a71ec1f gmon: fix memory corruption issues [BZ# 30101] a908c18d47 gmon: Revert addition of tunables to preserve GLIBC_PRIVATE ABI 7c32cb7dd8 gmon: Revert addition of tunables to the manual Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.15 to 5.15.112John Audia2023-05-187-17/+17
| | | | | | | | | | | | | | | Manually adjusted before running quilt due to new location in tree: backport-5.15/780-v5.16-bus-mhi-pci_generic-Introduce-Sierra-EM919X-support.patch backport-5.15/781-v6.1-bus-mhi-host-always-print-detected-modem-name.patch pending-5.15/790-bus-mhi-core-add-SBL-state-callback.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: other: adjust paths for new locationJohn Audia2023-05-181-2/+2
| | | | | | | | | This upstream commit[1] moves drivers/bus/mhi/core/ to drivers/bus/mhi/host/ so we need to correct for that here. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.112&id=9fbf10148f31a63b6d8c2b0e56cb97eb173d600b Signed-off-by: John Audia <therealgraysky@proton.me>
* umdns: Update to umdns HEADMark Baker2023-05-181-4/+4
| | | | | | | | | Update to umdns HEAD to include latest enhancements for browse method filtering, return of TXT records as an array, dumping IPv4/6 as an array, and including the interface name in a browse reply. Signed-off-by: Mark Baker <mark@vpost.net> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> #ipq807x, mt7621, x86_64
* rockchip: add NanoPi R2C supportTianling Shen2023-05-186-4/+105
| | | | | | | The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC chip changed from rtl8211e to yt8521s, and otherwise identical to R2S. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-rockchip: add NanoPi R2C supportTianling Shen2023-05-186-2/+438
| | | | | | | Add support for the FriendlyARM NanoPi R2C. Manually generated of-platdata files to avoid swig dependency. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* kernel: backport Motorcomm YT8521/YT8531 supportTianling Shen2023-05-1817-5/+2915
| | | | | | It will be used on NanoPi R2C and OrangePi R1 Plus LTS board. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: move UBOOT_DEVICE_NAME to defaultTianling Shen2023-05-182-3/+1
| | | | | | Simplify variable usage. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* rockchip: merge bootscriptTianling Shen2023-05-184-18/+12
| | | | | | | | The bootscript for nanopi r2s/r4s only changes the serial address, so make it auto detected in mmc bootscript rather than creating more (redudant) files. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* uboot-rockchip: cleanup redudant variablesTianling Shen2023-05-181-22/+18
| | | | | | | Instead of adding these common variables again and again simply create a shared set for each SoC. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* gpio-button-hotplug: do not error on interrupt attached keysTim Harvey2023-05-181-0/+7
| | | | | | | | | | | | The Linux gpio-keys driver bindings allow for GPIO attached or interrupt attached keys. Currently if an interrupt attached key is encountered gpio_keys_button_probe() will fail due to not being able to get a gpio descriptor: gpio-keys: probe of gpio-keys failed with error -2 Skip the failure in the case of interrupt attached keys to resolve this. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ipq806x: remove dangling ipq-wifi-edgecore_ecw5410Christian Lamparter2023-05-181-2/+1
| | | | | | | should have been part of the ipq-wifi update. Fixes: 8217f02a1c5e ("ipq-wifi: drop upstreamed board-2.bin") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* imx: image: ventana: add blkdev compressed disk imageTim Harvey2023-05-181-1/+25
| | | | | | | | | | | Add a ventana-img.gz compressed disk image to support squashfs+ext4 on a block storage device such as USB/MMC/SATA. The Ventana bootloader expects the bootscript to be boot/6x_bootscript-ventana therefore we must create a bootfs that matches this. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: image: ventana: use squashfs rootfs for non NAND devicesTim Harvey2023-05-181-2/+2
| | | | | | | In order to support squashfs+ext4 define rootfstype=squashfs and use P2 as P1 is boot filesystem. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* util-linux: update to 2.39Thomas Weißschuh2023-05-1813-250/+29
| | | | | | | | | | | | | | | | | | | | | | | | Release Notes: https://cdn.kernel.org/pub/linux/utils/util-linux/v2.39/v2.39-ReleaseNotes Remove upstreamed: 030-meson-don-t-use-run.patch 040-meson-fix-cpu_set_t-test.patch 050-meson-fix-environ-search.patch 060-meson-add-_GNU_SOURCE-for-sighandler_t.patch 070-meson-fix-isnan-check.patch 080-meson-fix-tzname-check.patch 090-meson-libpam.patch 100-meson-make-libcap-ng-dependent-on-setpriv.patch 120-meson-get-the-project-version-from-the-version-gen-s.patch 130-meson-fix-error-in-processing-version-for-pc-files.patch New: 0001-test_enosys-add-support-for-mips.patch Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de> [Refresh patches] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ksmbd: removeRosen Penev2023-05-182-84/+0
| | | | | | In tree ksmbd is available with 5.15 and is better updated. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* linux/modules: add ksmbd support for 5.15Rosen Penev2023-05-181-0/+37
| | | | | | | 5.15 is the first version to come with ksmbd. Use it instead of the module as the linux one is better maintained. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: modules: split smbfs-common from cifsJohn Thomson2023-05-181-3/+18
| | | | | | | | | This kernel config symbol is a shared library used for both CIFS and the in-tree SMB_SERVER. Split it out into kmod-fs-smbfs-common from kmod-fs-cifs, and depend on it, so that later in-tree ksmbd may also depend on it. Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* ramips: add basic common recipe for nand flash devicesShiji Yang2023-05-181-207/+47
| | | | | | | | These same codes are repeated for many devices now, it's better to move them to shared definition. This commit also add the missing KERNEL_SIZE of the ZyXEL NR7101 and ZyXEL LTE3301-PLUS. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: set default BLOCKSIZE to 64k for nor flash devicesShiji Yang2023-05-187-74/+2
| | | | | | | | | In kernel 5.15, the default erase sector size of the nor flash has been switched from 4k to 64k. This may cause the configuration not be preserved across upgrades. To avoid this issue, change the default BLOCKSIZE to 64k. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: enable variable sector size erasure for all subtargetShiji Yang2023-05-184-2/+4
| | | | | | | | | Make use of minor sector size (4k) on supported flash chips to improve spi read/write performance. Tested on ramips/mt7628: Motorola MWR03 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: add MODULE_ALLOW_BTF_MISMATCH optionTianling Shen2023-05-181-0/+10
| | | | | | | | | | | BTF mismatch can occur for a separately-built module even when the ABI is otherwise compatible and nothing else would prevent successfully loading. Add a new config to control how mismatches are handled. By default, preserve the current behavior of refusing to load the module. If MODULE_ALLOW_BTF_MISMATCH is enabled, load the module but ignore its BTF information. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* ipq-wifi: drop upstreamed board-2.binChristian Lamparter2023-05-183-63/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BDFs for the: Aruba AP-365 Devolo Magic 2 WiFi next Edgecore ECW5410 Edgecore OAP100 Extreme Networks WS-AP3915i GL.iNet GL-A1300 GL.iNet GL-AP1300 GL.iNet GL-S1300 Linksys EA8300 Linksys WHW03v2 Nokia Wi4A AC400i P&W R619AC Pakedge WR-1 Qxwlan E2600AC C1 Sony NCP-HG100/Cellular Teltonika RUTX10 ZTE MF18A were upstreamed to the ath10k-firmware repository and landed in linux-firmware.git. Furthermore the BDFs for the: 8devices Habanero 8devices Jalapeno Qxwlan E2600AC C2 have been updated. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mvebu: use PHY LED trigger for speed LEDs on FortiGate 50EINAGAKI Hiroshi2023-05-182-9/+12
| | | | | | | | | | | | | Use <mdio>:<addr>:<speed> trigger instead of netdev(link) trigger for Fortinet FortiGate 50E, to indicate link speed on the each phys. 1000 Mbps: Green 100 Mbps : Amber 10 Mbps : (turn off) Fixes: 102dc5a62506 ("mvebu: add support for Fortinet FortiGate 50E") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mvebu: cortexa9: enable Ethernet PHY LED triggerINAGAKI Hiroshi2023-05-181-0/+1
| | | | | | | To use <mdio>:<addr>:<speed> trigger for LEDs, enable PHY LED trigger (CONFIG_LED_TRIGGER_PHY). Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* download: create immutable subversion checkout archiveTomasz Maciej Nowak2023-05-181-1/+1
| | | | | | | | | On each generation of the archive check sum will differ, because when checking out subversion repository, current date is used for directories creation. Force tar to assign creation date of the last revision for all items inside archive. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* scripts/gen_image_generic.sh: allow passing in partition offsetTim Harvey2023-05-181-1/+1
| | | | | | | | | | Allow passing in an optional offset (PARTOFFSET) for the first partition. If not specified this will default to 256K (512 blocks) as it has before. For example if you want to start partition data at a 16M offset instead of 256K, specify 'PARTOFFSET=16M'. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* octeontx: kernel: add USB storage boot supportTim Harvey2023-05-181-0/+2
| | | | | | | | | Enable BLK_DEV_SD and USB_STORAGE so that rootfs can be on a USB Mass Storage device. This increases the kernel Image by 66KiB Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: kernel: add USB storage boot supportTim Harvey2023-05-181-0/+2
| | | | | | | | | Enable BLK_DEV_SD and USB_STORAGE so that rootfs can be on a USB Mass Storage device. This adds 23KiB to the compressed kernel size Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* nu801: add kmod-leds-uleds to MR26 + MR18Christian Lamparter2023-05-182-2/+2
| | | | | | | | | | | | | | support for MR18 and MR26 was developped before the userspace nu801 was integrated with x86's MX100 into OpenWrt. The initial nu801 + kmod-leds-uleds caused build-bot errors. The solution that worked for the MX100 was to include the kmod-leds-uleds to the device platform module. Thankfully, the MR26 and MR18 can just add the uleds package to the DEVICE_PACKAGES variable. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* libxml2: update to 2.11.3Nick Hainke2023-05-182-4/+4
| | | | | | | | | | | | Changelog: - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.10.4 - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.0 - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.1 - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.2 - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.3 Fixes: CVE-2023-28484 CVE-2023-29469 Signed-off-by: Nick Hainke <vincent@systemli.org>
* ramips: rename to D-Team Newifi D2 and Lenovo Newifi D1Arınç ÜNAL2023-05-183-6/+6
| | | | | | | Rename Newifi D2 to D-Team Newifi D2, and Newifi D1 to Lenovo Newifi D1. Let's not make naming exceptions because of marketing whims. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* ramips: add support for TOZED ZLT S12 PROArınç ÜNAL2023-05-184-0/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TOZED ZLT S12 PRO is an AC1200 router featuring 4 Ethernet ports with a TOZED TL70-C cellular modem which supports the NCM mode. The stock firmware does SIM locking on the modem by stopping dialing when a different PLMN is detected. This is not the case on OpenWrt. Specifications: - CPU: MediaTek MT7621AT - RAM: 256MB DDR3 - NOR Flash: MX25L12833FM2I 16MB SPI Flash - Wi-Fi 2.4Ghz: MT7603E - Wi-Fi 5Ghz: MT7612E - Switch: MT7530 4x 1Gbit Ports - WWAN: Unisoc SL8563 based TOZED TL70-C LTE CAT6 cellular modem - USB: 1x optional USB2.0 external port - Switches/Buttons: WPS, Reset, Power Switch - LEDs: Power, Wi-Fi, Data, Signal 1-5, Phone Installation and TFTP Recovery: - Connect to serial console. - Boot initramfs image by choosing option 1 when U-Boot prompts. - Install sysupgrade image via OpenWrt. Serial Pins: Located at the bottom right when looking from the front, right under the Reset/WPS buttons. The pinout from the left is: - RX - GND - TX Baudrate is 115200. When connecting from a powered off state, disconnect RX as it blocks the boot process. Link: http://www.sztozed.com/en/contents/58/84.html Co-developed-by: Andre Cruz <me@1conan.com> Signed-off-by: Andre Cruz <me@1conan.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* comgt-ncm: add support for UNISOC SL8563 based TOZED TL70-CArınç ÜNAL2023-05-181-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | TOZED TL70-C is an LTE CAT6 cellular modem based on UNISOC SL8563. UNISOC was formerly called Spreadtrum hence the manufacturer name detected on the modem is spreadtrum. The connect and disconnect commands bring up and down the usb0 interface. They are Base64 encoded as that's what the AT command accepts. The modem can do up to 4 APNs by bringing the USB interfaces, usb0 to usb3, up. Setting the USB interfaces up: connmanctl ndisdial AT^NDISDUN="usb0",1,1 connmanctl ndisdial AT^NDISDUN="usb1",1,2 connmanctl ndisdial AT^NDISDUN="usb2",1,3 connmanctl ndisdial AT^NDISDUN="usb3",1,4 Setting the USB interfaces down: connmanctl ndisdial AT^NDISDUN="usb0",0,1 connmanctl ndisdial AT^NDISDUN="usb1",0,2 connmanctl ndisdial AT^NDISDUN="usb2",0,3 connmanctl ndisdial AT^NDISDUN="usb3",0,4 Co-developed-by: Andre Cruz <me@1conan.com> Signed-off-by: Andre Cruz <me@1conan.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* base-files: add protocol ncm support for ucidef_set_interface()Arınç ÜNAL2023-05-181-0/+1
| | | | | | | Make it possible to set up a default network (interface) for devices with cellular modems using NCM. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* wwan: add Medion S4222 usb lte stickJoe Cooper2023-05-182-1/+6
| | | | | | | | add description for medion usb lte webstick Signed-off-by: Joe Cooper <highjagger+github@gmail.com> [bump PKG_RELEASE] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ucode: update to the latest versionTianling Shen2023-05-181-3/+3
| | | | | | | | | 8f78aff2cb68 ubus: support multiple call return values 51f4dba67313 ucode: also link libresolv if ns_initparse() is not found 5c7d07773a59 uci: fix ctx.commit() without arguments 5163867269fc Merge pull request #148 from jow-/uci-fix-commit Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* mediatek: remove left-over reference to make_gl_metadata.pyDaniel Golle2023-05-181-3/+1
| | | | | | | | When adding support for the GL.iNet GL-MT3000 a reference to the non-existent make_gl_metadata.py script was accidentally added. Remove it, flashing from vendor firmware also works fine without that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: Fix Wireless Frequencies for HYC-G920Muhammad AL-Qadhy2023-05-181-0/+2
| | | | | | Fix wireless frequencies to show correct wireless interfaces. Signed-off-by: Muhammad AL-Qadhy <m.ismael@gmail.com>
* px5g-wolfssl: replace COMMITCOUNT with real PKG_RELEASETianling Shen2023-05-181-1/+1
| | | | | | Similar to the AUTORELEASE conversion process. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* treewide: replace AUTORELEASE with real PKG_RELEASETianling Shen2023-05-1858-58/+58
| | | | | | | | | | | | | | | | | | Based on Paul Fertser <fercerpav@gmail.com>'s guidance: Change AUTORELEASE in rules.mk to: ``` AUTORELEASE = $(if $(DUMP),0,$(shell sed -i "s/\$$(AUTORELEASE)/$(call commitcount,1)/" $(CURDIR)/Makefile)) ``` then update all affected packages by: ``` for i in $(git grep -l PKG_RELEASE:=.*AUTORELEASE | sed 's^.*/\([^/]*\)/Makefile^\1^';); do make package/$i/clean done ``` Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* firmware-utils: update to latest HEADDavid Bauer2023-05-181-3/+3
| | | | | | | | | 02cdbc6 tplink-safeloader: add Archer AX23 v1.2 (RU) de36fa6 tplink-safeloader: add AX23 support-list entry 5f6fefd tplink-safeloader: order AX23 support-list 25131d6 tplink-safeloader: add Archer C59 / C60 CA ragion code Signed-off-by: David Bauer <mail@david-bauer.net>
* libselinux: update to 3.5Linhui Liu2023-05-181-6/+5
| | | | | | | | | | | | | Switch from libpcre to libpcre2. While working on it remove the double defined HOST_BUILD_DEPENDS section. Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com> [depend on libpcre2] Signed-off-by: Nick Hainke <vincent@systemli.org>
* secilc: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* policycoreutils: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* libsemanage: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* libsepol: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* checkpolicy: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-28 21:47:34 +0000