aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* base-files: split ubi attaching out of nand_upgrade_prepare_ubiChuanhong Guo2022-12-171-27/+38
| | | | | | | split ubi reformat/attach into nand_attach_ubi in preparation for reusing this code in other functions. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: add support for EON EN25QX128A spi nor flashChristian Marangi2022-12-162-0/+42
| | | | | | | | | Add support for EON EN25QX128A spi nor flash with no flags as it does support SFDP parsing. Fixes: #9442 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Tested-by: Szabolcs Hubai <szab.hu@gmail.com> [ramips/mt7621: xiaomi_mi-router-4a-gigabit]
* CI: introduce target toolchain testChristian Marangi2022-12-161-0/+64
| | | | | | Add test to build test toolchain for each target. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: build: make kernel build configurableChristian Marangi2022-12-163-0/+6
| | | | | | Make kernel build configurable to permit to introduce toolchain testing. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: improve build naming for shared workflowChristian Marangi2022-12-162-2/+3
| | | | | | | Impove build naming for build shared workflow to better understand what is being test. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: add LED support for Xiaomi Redmi AX6000Furong Xu2022-12-163-0/+55
| | | | | | | add DT nodes and default package for the LEDs on Redmi AX6000 Signed-off-by: Furong Xu <xfr@outlook.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: enable sel_clk for spi-mt65xxFurong Xu2022-12-161-0/+29
| | | | | | | | | Without explicitly enabling sel_clk, clk_disable_unused() will disable it when boot is done, causing CPU hang on SPI1 register access on MT7986. Explicitly enable sel_clk to make SPI1 functional. Signed-off-by: Furong Xu <xfr@outlook.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: add driver package for WS2812B LEDsChuanhong Guo2022-12-163-0/+268
| | | | | | | Two WS2812B (NeoPixel) clones are used in Xiaomi Redmi AX6000 as indicator lights. Add a driver for controlling it using SPI MOSI. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mac80211: fix a regression in processing management frames for AP VLAN ↵Felix Fietkau2022-12-161-21/+22
| | | | | | | | interfaces Fixes re-assoc of WDS stations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: enable coredumpsFelix Fietkau2022-12-161-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: always set a default for the nas identifierFelix Fietkau2022-12-161-2/+3
| | | | | | | It is used for both 802.11r and WPA enterprise. Setting it when not needed is harmless Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: work around a race condition on detecting a phy while bringing it upFelix Fietkau2022-12-161-0/+4
| | | | | | | | When reloading modules and running wifi, a phy can sometimes be renamed while in the middle of a hotplug call that tries to detect new phys This can lead to bogus wifi-device sections being created Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix uninitialized variable in rx->link/link_sta initialization fixFelix Fietkau2022-12-161-23/+15
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for automatically setting RADIUS own-ip dynamicallyFelix Fietkau2022-12-162-2/+118
| | | | | | Some servers use the NAS-IP-Address attribute as a destination address Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rpcd: update to latest Git HEADJo-Philipp Wich2022-12-161-5/+7
| | | | | | | | | 7de4820 iwinfo: add "hwmodes_text" to the info output b3f530b iwinfo: clean up rpc_iwinfo_call_hw_ht_mode() c46ad61 iwinfo: reuse infos provided by libiwinfo 6c5e900 iwinfo: constify string map arg for rpc_iwinfo_call_int() Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* iwinfo: update to latest Git HEADJo-Philipp Wich2022-12-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 8d15809 cli: print current HT mode 8f86dd6 cli: use IWINFO_HTMODE_COUNT f36b72b cli: use IWINFO_KMGMT_NAMES 91be7e0 cli: use IWINFO_CIPHER_NAMES 49b6ec9 cli: fix printing the scan channel width b1c8873 cli: fix marking the active channel 9e14e64 utils: add iwinfo_band2ghz() and iwinfo_ghz2band() helpers e084781 utils: add helper functions to get names by values d09a77a utils: add iwinfo_htmode_is_{ht|vht|he} helpers 8752977 utils: add and use iwinfo_format_hwmodes() 02f433e lib: add IWINFO_80211_COUNT and IWINFO_80211_NAMES 1d30df1 lib: add IWINFO_BAND_COUNT and IWINFO_BAND_NAMES aefd0ef lib: use common IWINFO_CIPHER_NAMES strings a5b30de lib: add IWINFO_OPMODE_COUNT and use it for IWINFO_OPMODE_NAMES 9f29e79 lib: constify and fixup the string array definitions fddc015 nl80211: mark frequencies where HE operation in not allowed 6d50a7c nl80211: add support for HE htmodes 4ba5713 nl80211: properly get available bands for the hwmode 91b2ada nl80211: update the kernel header nl80211.h 3f619a5 nl80211: fix frequency/channel conversion for the 6G band a77d915 nl80211: don't guess if a name is an ifname c27ce71 devices: add usb device MediaTek MT7921AU 14f864e nl80211: add ability to describe USB devices a5a75fd nl80211: remove ancient wpa_supplicant ctrl socket path dd4e1ff nl80211: fix wpa supplicant ctrl socket permissions d638163 fix -Wdangling-else warnings 4aa6c5a fix -Wreturn-type warning 3112726 fix -Wpointer-sign warning ebd5f84 fix -Wmaybe-uninitialized warning 5469898 fix -Wunused-variable warnings 462b679 fix -Wduplicate-decl-specifier warnings ccaabb4 fix -Wformat-truncation warnings 50380db enable useful compiler warnings via -Wall Fixes: https://github.com/openwrt/openwrt/issues/10158 Fixes: https://github.com/openwrt/openwrt/issues/10687 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* realtek: add Linux Kernel 5.15 as testing versionINAGAKI Hiroshi2022-12-151-0/+1
| | | | | | | | | | | | | | | | Add Linux Kernel 5.15 support for testing. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [APRESIA ApresiaLightGS120GT-SS, Panasonic Switch-M24eG PN28240K, Switch-M48eG PN28480K] Tested-by: INAGAKI Hiroshi <musashino.open@gmail.com> TP-Link TL-SG2008P Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [D-Link DGS-1210-20, DGS-1210-52, Zyxel XGS1010-12] Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de> [Zyxel XGS1250-12] Tested-by: Lucian Cristian <lucian.cristian@gmail.com> # Zyxel [HPE 1920-8G, 1920-48G] Tested-by: Jan Hoffmann <jan@3e8.eu>
* realtek: enable needs_standalone_vlan_filtering on DSA driver in 5.15INAGAKI Hiroshi2022-12-151-0/+1
| | | | | | | To configure VLAN 0, enable needs_standalone_vlan_filtering option of dsa_switch struct. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: update dsa.c of DSA driver for 5.15INAGAKI Hiroshi2022-12-151-101/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - rtl83xx_vlan_filtering() "struct switchdev_trans *trans" parameter was removed[1] and "struct netlink_ext_ack *extack" was added[2]. [1]: https://www.spinics.net/lists/netdev/msg712250.html [2]: https://www.spinics.net/lists/netdev/msg722496.html - rtl83xx_vlan_add/del() vlan->vid_begin and vlan->vid_end were removed and vlan->vid was added[3]. [3]: https://www.spinics.net/lists/netdev/msg712248.html - rtl83xx_vlan_prepare() "port_vlan_prepare" member was removed from "dsa_switch_ops" struct in dsa.h[4] and vlan_prepare function should be called from vlan_add function. Also, change return type of vlan_add function to int. [4]: https://www.spinics.net/lists/netdev/msg712252.html - rtl83xx_port_mdb_add() "port_mdb_prepare" member in "dsa_switch_ops" struct was removed and preparation need to be done in the function of "port_mdb_add" member instead. And also, int type need to be returned on "port_mdb_add" member[5]. [5]: https://www.spinics.net/lists/netdev/msg712251.html - rtl83xx_port_pre_bridge_flags(), rtl83xx_port_bridge_flags() The current "port_pre_bridge_flags" member and "port_bridge_flags" member in "dsa_switch_ops" in dsa.h has flags of "struct switchdev_brport_flags" type instead[6], so adjust to it. And, the changed features are passed by flags.mask[7] in rtl83xx_port_bridge_flags(), so check it before calling function to enable/disable fieature. [6]: https://lore.kernel.org/lkml/20210212151600.3357121-7-olteanv@gmail.com/ [7]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e18f4c18ab5b0dd47caaf8377c2e36d66f632a8c Suggested-by: Markus Stockhausen <markus.stockhausen@gmx.de> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [shorten final return statement of rtl83xx_port_mdb_add()] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: update platform support for 5.15INAGAKI Hiroshi2022-12-152-6/+2
| | | | | | | | | | - fw_passed_dtb and others were replaced to get_fdt() function[1] - __appended_dtb defined by asm/bootinfo.h[2] [1]: https://www.spinics.net/lists/linux-mips/msg03332.html [2]: https://www.spinics.net/lists/linux-mips/msg03332.html Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: refresh config-5.15 in all subtargetsINAGAKI Hiroshi2022-12-154-92/+123
| | | | | | Refresh config-5.15 in all subtargets by kernel_menuconfig. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: refresh patches in 5.15INAGAKI Hiroshi2022-12-1532-126/+121
| | | | | | Adjust patches for kernel 5.15. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: drop patches of upstreamed fix and changes from 5.15INAGAKI Hiroshi2022-12-154-1113/+0
| | | | | | | | | | - 007-5.16-gpio-realtek...: upstreamed on 5.16 and backported to 5.15.3 - 708-brflood-spi.patch : upstreamed - 709-lag-offloading.patch: upstreamed - 713-v5.12-net-dsa-... : upstreamed and some implementations are replaced Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: drop patches of upstreamed drivers from 5.15INAGAKI Hiroshi2022-12-156-1091/+0
| | | | | | | | | | | The following drivers were upstreamed and available on 5.15, so drop from OpenWrt tree. - realtek-otto-gpio (5.13) - realtek-rtl-spi (5.12) - realtek-rtl-intc (5.12) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: copy dts/files/patches/configs for 5.15INAGAKI Hiroshi2022-12-15139-0/+39485
| | | | | | | | Copy dts/files/patches/configs from 5.10 to 5.15. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [refresh with updated DGS-1210 dts files] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* firmware-utils: fix archive checksumSander Vanheule2022-12-151-1/+1
| | | | | | | | | PKG_SOURCE_DATE was modified after updating PKG_MIRROR_HASH, causing the latter to change. This results in a warning during builds and rejected downloads. Fixes: 232879a7b7f8 ("firmware-utils: bump to git HEAD") Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: fix dtc warnings in ruckus zf7372Christian Lamparter2022-12-151-0/+4
| | | | | | | |:69.4-14: Warning (reg_format): beamforming-2g-gpio@0:reg: property has invalid length (4 bytes) |:85.4-14: Warning (reg_format): beamforming-5g-gpio@0:reg: property has invalid length (4 bytes) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: fix dtc warnings in eap1750hChristian Lamparter2022-12-151-19/+19
| | | | | | | | | | | | |109.3-19: Warning (reg_format): macaddr@0:reg:property has invalid length (8 bytes) |113.3-24: Warning (reg_format): calibration@1000:reg: property has invalid length (8 bytes) |117.3-24: Warning (reg_format): calibration@5000:reg: property has invalid length (8 bytes) also integrate the art-nodes nodes back into the partition-subnode and change the calibration labels to match what everyone else is doing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: fix dtc warnings in eap1200hChristian Lamparter2022-12-151-19/+19
| | | | | | | | | | | | |109.3-19: Warning (reg_format): macaddr@0:reg:property has invalid length (8 bytes) |113.3-24: Warning (reg_format): calibration@1000:reg: property has invalid length (8 bytes) |117.3-24: Warning (reg_format): calibration@5000:reg: property has invalid length (8 bytes) also integrate the art-nodes nodes back into the partition-subnode and change the calibration labels to match what everyone else is doing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: replace reference to legacy qca,disable-2ghz in WatchGuard AP100Nick Hainke2022-12-151-1/+1
| | | | | | | | | Commit 4c8dd973ef8e ("ath9k: OF: qca,disable-(2|5)ghz => ieee80211-freq-limit") removed "qca,disable-5ghz" and "qca,disable-2ghz". Signed-off-by: Nick Hainke <vincent@systemli.org> (converted patch to remove the ieee80211-freq-limit property instead) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: switch to upstream ieee80211-freq-limit for Araknis AN-300-AP-I-NNick Hainke2022-12-151-2/+2
| | | | | | | | Commit 4c8dd973ef8e ("ath9k: OF: qca,disable-(2|5)ghz => ieee80211-freq-limit") removed "qca,disable-5ghz" and "qca,disable-2ghz". Switch to upstream ieee80211-freq-limit. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: convert Winchannel WB2000 WiFis to nvmem-cellsNick Hainke2022-12-152-20/+26
| | | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Signed-off-by: Nick Hainke <vincent@systemli.org> (removed mtd-cal-data property, merged art + addr nodes back into partition) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: convert Ubiquiti UniFi AP Pro WiFis to nvmem-cellsNick Hainke2022-12-152-14/+21
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Signed-off-by: Nick Hainke <vincent@systemli.org> (merged art node back into partition-node) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: convert OCEDO Raccoon WiFis to nvmem-cellsNick Hainke2022-12-152-27/+30
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Signed-off-by: Nick Hainke <vincent@systemli.org> (merged art into partition node, removed stale uboot label) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: Mercury MW4530R v1 already uses nvmem-cellsNick Hainke2022-12-151-1/+0
| | | | | | | | Remove the caldata extraction in userspace. The board already uses nvmem-cells since commit e354b01baf88 ("ath79: calibrate all ar9344 tl-WDRxxxx with nvmem") Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: convert boards based on senao_ap-dual.dtsi WiFis to nvmem-cellsNick Hainke2022-12-156-21/+51
| | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: convert Atheros DB120 WiFis to nvmem-cellsNick Hainke2022-12-152-18/+25
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Signed-off-by: Nick Hainke <vincent@systemli.org> (merged art-node back into partition-node) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: convert Araknis AN-300-AP-I-N WiFis to nvmem-cellsNick Hainke2022-12-152-8/+12
| | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Signed-off-by: Nick Hainke <vincent@systemli.org>
* bcm27xx: bcm2711: add kmod-r8169Johannes Heimansberg2022-12-151-1/+2
| | | | | | | | | | | | | | | | | | Some carrier boards [1][2] for the Raspberry Pi CM4 that are specifically designed to be used as routers come with secondary NICs using a Realtek RTL8111 Gigabit Ethernet chip. When using such a board as a router with OpenWrt, it is very helpful when both NICs are working by default. Since the Raspberry Pi 4 and the CM4 have plenty of disk space, it should cause no harm to include the kmod-r8169. [1] https://wiki.dfrobot.com/Compute_Module_4_IoT_Router_Board_Mini_SKU_DFR0767 [2] https://www.waveshare.com/wiki/CM4-DUAL-ETH-MINI Signed-off-by: Johannes Heimansberg <git@jhe.dedyn.io> (r8169 should pull in the necessary dependencies.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* bcm53xx: Patch to support BCMA rev 11Linus Walleij2022-12-152-0/+56
| | | | | | | A backported patch to the BCMA driver necessary to support the DWL-8610AP and DIR-890L. Patch will be in upstream v6.2. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* firmware-utils: bump to git HEADSander Vanheule2022-12-151-3/+3
| | | | | | | | Adds support for building TP-Link CPE605v1 factory images bd856eff4850 tplink-safeloader: add TP-Link CPE605 v1 Support Signed-off-by: Sander Vanheule <sander@svanheule.net>
* kernel: bump 5.10 to 5.10.159John Audia2022-12-145-37/+7
| | | | | | | | | | | | | | | Removed upstreamed: backport-5.10/888-v6.1-ca8210-Fix-crash-by-zero-initializing-data.patch[1] All patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.159&id=0a8e66e375736ea12c11f0ef238ba2a8efec460b Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.83John Audia2022-12-1419-67/+37
| | | | | | | | | | | | | | | Removed upstreamed: backport-5.15/883-v6.1-ca8210-Fix-crash-by-zero-initializing-data.patch[1] All patches automatically rebased 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.83&id=246bcd05ba6cc43b34ac0bb4bac3ea94a4efa07c Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me>
* tools/dosfstools: fix PKG_SOURCEStijn Tintel2022-12-141-2/+2
| | | | | | | | Both mirrors provided in the Makefile only serve gzipped tarballs. Fixes: #10871 Fixes: 9edfe7dd13d9 ("source: Switch to xz for packages and tools where possible") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: add missing symbol to 5.10 configStijn Tintel2022-12-141-0/+1
| | | | | | | | | | Kernel 5.10.158 added a prompt for the FUNCTION_ERROR_INJECTION symbol. This is exposed in builds with CONFIG_KERNEL_KPROBES enabled, causing those builds to fail due to a missing symbol. Add the symbol to fix this. Fixes: 6801c460b6a7 ("kernel: bump 5.10 to 5.10.158") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: add missing symbol to 5.15 configStijn Tintel2022-12-141-0/+1
| | | | | | | | | | Kernel 5.15.82 added a prompt for the FUNCTION_ERROR_INJECTION symbol. This is exposed in builds with CONFIG_KERNEL_KPROBES enabled, causing those builds to fail due to a missing symbol. Add the symbol to fix this. Fixes: 68426e54eda4 ("kernel: bump 5.15 to 5.15.82") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* qoriq: switch to kernel 5.15Stijn Tintel2022-12-141-2/+1
| | | | | | | | | The testing kernel has been running fine for months on a rather complex network setup, with one exception being a crash in __xfrm_state_delete(). This crash has been fixed in kernel 5.15.82, so let's switch the qoriq target to kernel 5.15 by default. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mac80211: fix connecting multiple wds stations to an APFelix Fietkau2022-12-142-1/+26
| | | | | | A faulty check prevented the AP_VLAN interfaces from being brought up Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: 5.15: standardize wpq864 partition tableChristian Marangi2022-12-141-43/+43
| | | | | | | | | | Compex WPQ864 contains a non standard partition table. Each partition node should be named partition and should contain a valid reg. Fix an extra "-" present after the reg for SBL2_1 partition. Also add "0:" to each qcom default partition following smem naming. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: fix wrong boot-partitions values for split partitionsChristian Marangi2022-12-143-3/+3
| | | | | | | | | | | | | The refreshed patch actually use the format of <start size start size> instead of <start end start end>. This cause boot fail since the rootfs can't be mounted with these wrong values. Fix it to the correct format in each affected dts. Fixes: #11498 Fixes: 6134ba4a34db ("ipq806x: 5.15: add boot-partitions binding to fix block warning") Tested-by: Matt Buczko <mbuczko@hotmail.com> # Askey RT4230W Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-24 15:03:26 +0000