aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* toolchain/musl: remove several GNU headersRosen Penev2021-09-226-554/+0
| | | | | | | | | | | | | | | | Remove GLOB_ONLYDIR patch. Only fstools relies on it. fstools has been fixed separately. Remove woresize.h file. It seems to be for an old version of GCC. Remove features.h and glibc-types files. Same as above. Remove sys/cdefs.h. This is a deprecated header. Patches to fix packages that use it have already been patched. Tested with all packages in the base tree. They all compile. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain/musl: update to 1.2.2Rosen Penev2021-09-2212-316/+26
| | | | | | | | | | | This release introduces 64-bit time_t, which is needed to avoid the year 2038 problem. Remove upstream patches. Refreshed others. Rebased features.h file based on latest musl. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain/gcc: switch to version 11 by defaultPaul Spooren2021-09-212-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | gcc10 seem to increase build size and gcc11 seem to fix that. Compile tests: * all Runtime tests: * ath79 * mpx85xx/p2020 * mvebu * x86/64 Special thanks to Rosen for fixing layerscape & bcm63xx Signed-off-by: Paul Spooren <mail@aparcar.org> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com Acked-by: Rosen Penev <rosenp@gmail.com> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> Tested-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* tfp-layerscape: update to LSDK-20.12Rosen Penev2021-09-213-10/+23
| | | | | | | | | | Fixes compilation with GCC11. Kept PKG_VERSION as there's some bug that chops off the 12 at the end. Refreshed other patch. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* restool: update to LSDK-20.12Rosen Penev2021-09-213-369/+2
| | | | | | | | | | | | Fixes compilation with both GCC 10 and 11. Switched to AUTORELEASE for simplicity. Removed PKG_VERSION as it's derived from PKG_SOURCE_VERSION. Removed all patches as they are upstream backports. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* bcm63xx: remove memcpy from mac assignmentRosen Penev2021-09-212-6/+16
| | | | | | | | | With GCC11, memcpy doesn't work here as it assumes a size of 0. Use ioremap to avoid it. Fixed parameter type to match board_get_mac_address. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain/gcc: cleanup gcc9 config optionPaul Spooren2021-09-211-3/+0
| | | | | | | This line should have been removed in 244847da "build: remove GCC9 support" but stayed in tree after an incomplete rebase. Fix it. Signed-off-by: Paul Spooren <mail@aparcar.org>
* 6rd: delete tunnel on interface teardownDavid Lam2021-09-222-1/+3
| | | | | | | | | | | | Delete tunnel on 6rd interface teardown. Should solve problem related to tunnel stuck on restart loop with "Unknown Command" on tunnel restart due to wan connection drop. This patch is similar to the one written by Ansuel on Aug 2, 2021 but the 6rd teardown produces the same symptoms when the network service is restarted. Signed-off-by: David Lam <david@thedavid.net>
* restool: fix compilation with GCC 10Kuan-Yi Li2021-09-213-10/+269
| | | | | | | | | GCC 10 defaults to `-fno-common` and complains about multiple definition of `mc_status` in restool. Backport a patch from upstream to fix compilation with host GCC 10. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
* hostapd: let netifd set bridge port attributes for snoopingFelix Fietkau2021-09-211-1/+30
| | | | | | Avoids race conditions on bridge member add/remove Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ustp: update to the latest versionFelix Fietkau2021-09-211-3/+3
| | | | | | | | c62d85cf7a0d bridge: check port bpdu filter status and apply it to the config 25555611be91 libnetlink: turn rtnetlink error answers into debug msgs 462b3a491347 build: use pthread cflags/ldflags Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2021-09-211-3/+3
| | | | | | | | | | | | d590fbd255ce wireless: always enable bpdu filter for AP interfaces and VLANs f8ff6d820283 system-linux: remove copy&paste from /proc and /sys path names 300b1220fab3 wireless: improve reliability of proxyarp support 5ba9744aac6d device: add support for configuring bonding devices 6fa9b042ff4d wireless: only apply wireless device attributes to the base vif interface 06d11bbf1f2b wireless: only enable proxyarp/isolate for AP vifs 08e954e137ff bonding: claim the port device before creating the bonding device Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add a bridge feature for filtering BPDU packets on portsFelix Fietkau2021-09-212-0/+354
| | | | | | This will be used to ensure that APs don't transmit unnecessary STP packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* arm-trusted-firmware-mvebu: Add hash for aarch64 cm3-gccHauke Mehrtens2021-09-201-0/+4
| | | | | | | | This adds the hash also for the aarch64 toolchain in addition to the x86_64 toolchain. This gets the build on a Linux aarch64 host one step further. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libtool: bump to 2.4.6Eneas U de Queiroz2021-09-2010-334/+444
| | | | | | | | | | | | | | | | This updates libtool to its current release, from 2015. Current patches were renumbered and given a description text. The fix in 160-passthrough-ssp.patch is no longer needed. A patch to speed up build was cherry-picked, and another openwrt specific patch was needed to not use quotes in $(SHELL), to acommodate our "SHELL=/usr/bin/env bash" usage. The already present call to ./bootstrap ensures that generated files are refreshed, so the patches are applied only to their sources. Also, that bootstrap call was adjusted to run at the appropriate time when QUILT=1. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* tools/e2fsprogs: update to 1.46.4Rosen Penev2021-09-204-5/+5
| | | | | | Refresh patches. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/autoconf-archive: update to 2021.02.19Rosen Penev2021-09-201-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/sstrip: update to 3.2Rosen Penev2021-09-201-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/sparse: update to 0.6.4Rosen Penev2021-09-201-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/mtools: update to 4.0.35Rosen Penev2021-09-201-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/m4: update to 1.4.19Rosen Penev2021-09-203-145/+2
| | | | | | Remove upstreamed patches. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/fakeroot: update to 1.26Rosen Penev2021-09-205-328/+3
| | | | | | Remove upstreamed patches. Refresh other. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/bison: update to 3.8.1Rosen Penev2021-09-202-19/+2
| | | | | | Remove upstreamed patch. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* build: remove GCC7 supportPaul Spooren2021-09-1926-1252/+1
| | | | | | | | | | | The development branch is now on version 10, we shouldn't drag to many old versions and therefore drop at least 7.x. Signed-off-by: Paul Spooren <mail@aparcar.org> Acked-by: Rosen Penev <rosenp@gmail.com> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* build: remove GCC9 supportPaul Spooren2021-09-1920-848/+0
| | | | | | | | | | | | gcc9 was never used within a release and the development branch is already on version 10, no need to keep this in tree. Signed-off-by: Paul Spooren <mail@aparcar.org> Acked-by: Rosen Penev <rosenp@gmail.com> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* iproute2: update to 5.14Hans Dedecker2021-09-1810-17/+17
| | | | | | | | Update iproute2 to latest stable 5.14; for the changes see https://lwn.net/Articles/867940/ Refresh patches Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: add missing CONFIG_NET_DSA_TAG_BRCM_LEGACY config symbolRafał Miłecki2021-09-171-0/+1
| | | | | | | | | | | | This fixes: Distributed Switch Architecture (NET_DSA) [Y/n/m/?] y Tag driver for Atheros AR9331 SoC with built-in switch (NET_DSA_TAG_AR9331) [N/m/y/?] n Tag driver for Broadcom switches using in-frame headers (NET_DSA_TAG_BRCM) [N/m/y/?] n Tag driver for Broadcom legacy switches using in-frame headers (NET_DSA_TAG_BRCM_LEGACY) [N/m/y/?] (NEW) Error in reading or end of file. Fixes: 8fa1b576bbb5 ("linux: update b53 upstream driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* linux: update b53 upstream driverRafał Miłecki2021-09-1718-10/+936
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* tools/pkgconf: update to 1.8.0Rosen Penev2021-09-162-8/+12
| | | | | | Switch to compiling with meson for faster and more reliable compilation. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools: add mesonRosen Penev2021-09-165-1/+213
| | | | | | | | | | | | | meson is a next generation build system designed to have good defaults, simpler build files, and fast compilation. It is built upon python and uses ninja for compilation. The latter provides fast by default (parallel) and problem free compilation. There are over 40 packages already successfully using meson. The next commit will convert pkgconf to use meson compilation. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/mm-macros: removeRosen Penev2021-09-162-35/+1
| | | | | | | | | | | | ccaaab1c048159611e93a181dde740f49fa12483 says that this is in the codebase because of libsigc++, which is not in the codebase anymore. Neither in base nor in packages. It doesn't seem to be needed by anything else either. GNOME packages have transitioned to using meson, which does not use m4 files. Tested local compile with CONFIG_ALL. No problems seen. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* bcm53xx: drop DTS based workaround for serial support in procdRafał Miłecki2021-09-161-116/+0
| | | | | | | | | Specifying serial in bootargs is not needed since the commit ffeb37047e85 ("procd: update to git HEAD"). It's thanks to the procd commit 2cfc26f8456a ("inittab: detect active console from kernel if no console= specified"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* procd: update to git HEADDaniel Golle2021-09-151-3/+3
| | | | | | | | | | | | 8a60e7e trace: don't leak file descriptor in error path 68df9ac procd: fix container deletion f16abe0 uxc: add JSON output option for 'list' command a23c888 jail: prepare for adding process to existing namespace 50da8a4 instance: allow jailed service to join namespace(s) 482d1ab Revert "jail: do not hack /etc/resolv.conf on container rootfs" 1eb4371 jail: start ubus and netifd instances for container with netns Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: add testing Linux 5.10Daniel Golle2021-09-1512-1/+1173
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add testing Linux kernel 5.10 for sunxi targets. Removed patches were replaced by upstream commits: - 410-v5.6-arm64-dts-allwinner-a64-olinuxino-Add-bank-supply-re.patch f0c3b29f56f0a arm64: dts: allwinner: a64: olinuxino: Add bank supply regulators - 420-v5.7-arm64-dts-allwinner-a64-olinuxino-add-user-red-LED.patch 89866b2667e0d arm64: dts: allwinner: a64: olinuxino: add user red LED - 440-add-h6-pwm.patch a7fe985633f92 pwm: sun4i: Add an optional probe for reset line b8d74644f34a8 pwm: sun4i: Prefer "mod" clock to unnamed 5b090b430d750 pwm: sun4i: Add an optional probe for bus clock fa4d81784681a pwm: sun4i: Always calculate params when applying new parameters 9f28e95b5286f pwm: sun4i: Add support to output source clock directly fdd2c12e3761f pwm: sun4i: Add support for H6 PWM - 441-arm64-dts-add-PWM-node.patch 88432f5f8469b arm64: dts: allwinner: h6: Add PWM node - 443-board-h6-orangepioneplus-fix-missing-ethernet.patch 7ee32a17e0d65 arm64: dts: allwinner: h6: orangepi-one-plus: Enable ethernet Run tested on friendlyarm,nanopi-neo (allwinner,sun8i-h3), looks all good. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: bring up DSA b53 switch on Lamobo R1Daniel Golle2021-09-157-109/+33
| | | | | | | | | | | | | | | | | | | | | Build cortexa7 subtarget with DSA driver for MDIO-connected Broadcom BCM53xxx switches. This is needed for the Lamobo R1 aka. BananaPi BPi-R1 board which comes with such a switch IC. Remove old swconfig driver from target kernel config as the only board using it is now supported by the DSA driver. No changes to device tree are needed as upstream DTS already got a DSA switch definition and we are just using that upstream source. Update default network config of the Lamobo R1 to create lan bridge with all 4 lan ports. Introduce DEVICE_COMPAT_VERSION for the board to inform users about having the re-create their network configuration and add device alias as Bananapi BPi-R1 while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mvebu: CZ.NIC's Secure Firmware bump to v2021.09.07sean lee2021-09-154-168/+2
| | | | | | | | | | | | | | | | | bump version and remove patches that have been applied 176d701 wtmi: Wait 1s after putting PHYs INTn pin low 2eeccfe wtmi: Change comment describing reset workaround e8c94a5 wtmi: Count RAM size from both CS0 and CS1 995979e wtmi: Rename macro e29eb29 wtmi: soc: Fix start_ap_workaround() for TF-A with debug 81245ed wtmi: Use constant name PLAT_MARVELL_MAILBOX_BASE 18ccb83 wtmi: Do a proper UART reset with clock change as described in spec 15ff106 avs: Validate VDD value from OTP 3f33626 fix: clock: a3700: change pwm clock for 600/600 and 1200/750 preset fb5e436 wtmi: uart: fix UART baudrate divisor calculation Signed-off-by: sean lee <ilf@live.com>
* build: store artifacts in JSONPaul Spooren2021-09-142-17/+52
| | | | | | | | | | | | | Multiple profiles create artifacts, these should be stored in the JSON file as well, allowing downstream tooling to show those files, too. Artifacts don't have specific filesystems so only the fields `name`, `type` and `sha256` are available. Rename env variable names from IMAGE_ to FILE_ prefixes to reflect that images, kernels and artifacts are added with the same command. Signed-off-by: Paul Spooren <mail@aparcar.org>
* dnsmasq: add config option for connmark DNS filteringEtan Kissling2021-09-141-0/+12
| | | | | | | | | This adds uci support to configure connmark based DNS filtering. Signed-off-by: Etan Kissling <etan_kissling@apple.com> (imported from upstream mailing list https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2021q2/015151.html) Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
* dnsmasq: Update to version 2.86Etan Kissling2021-09-142-5/+5
| | | | | | | | | | | | | | | | | | | | | Summary of upstream CHANGELOG: * Handle DHCPREBIND requests in the DHCPv6 server code. * Fix bug which caused dnsmasq to lose track of processes forked. * Major rewrite of the DNS server and domain handling code. * Revise resource handling for number of concurrent DNS queries. * Improve efficiency of DNSSEC. * Connection track mark based DNS query filtering. * Allow smaller than 64 prefix lengths in synth-domain. * Make domains generated by --synth-domain appear in replies when in authoritative mode. * Ensure CAP_NET_ADMIN capability is available when conntrack is configured. * When --dhcp-hostsfile --dhcp-optsfile and --addn-hosts are given a directory as argument, define the order in which files within that directory are read. * Support some wildcard matching of input tags to --tag-if. Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
* firmware-utils: tplink-safeloader: set EAP235-Wall v1 soft-versionSander Vanheule2021-09-131-1/+1
| | | | | | | | | | | | | | | | | | | Starting with v3 of the vendor firmware for the TP-Link EAP235-Wall v1, downgrades to firmware versions below v3 as not allowed. Since OpenWrt uses version 0.0.0 as a default, this causes the factory install to fail on devices with a recent firmware. This failure is associated by the following message on the device's serial console: EAP235/230-Wall forbid fw reverted from 3.x.x to lower version! Vendor firmware (v3) also uses build and release numbers to compare images, so identical version numbers are very unlikely to cause issues. Bump the firmware version to 3.0.0 to ensure users can install OpenWrt on their devices. Reported-by: Colton Conor <colton.conor@gmail.com> Tested-by: Colton Conor <colton.conor@gmail.com> Signed-off-by: Sander Vanheule <sander@svanheule.net>
* firmware-utils: tplink-safeloader: improve soft-version customisationSander Vanheule2021-09-132-74/+95
| | | | | | | | | | | | | | | | Some devices using the safeloader firmware format require a minimum or specific version to be set in the soft-version metadata partition. Currently only custom text values can be provided, but not all device firmware support this format. Modify the device info struct to allow for more well-defined types of soft-version overwrites, and provide a few macros for easy value initialisation. Requires all existing values to be updated to match the new structure. Signed-off-by: Sander Vanheule <sander@svanheule.net> [Adapt TL-WA1201-V2 entry too] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: update to 4.8.1-stableIvan Pavlov2021-09-134-18/+11
| | | | | | | | | | | Changes from 4.7.0: Fix one high (OCSP verification issue) and two low vulnerabilities Improve compatibility layer Other improvements and fixes For detailed changes refer to https://github.com/wolfSSL/wolfssl/releases Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
* octeontx: add linux 5.10 testing kernel supportDaniel Danzberger2021-09-133-0/+483
| | | | | | | | | | | | | | | | | | | | | | | | | | Changes from 5.4 to 5.10: ------------------------- - patches from 5.4 are all upstream for 5.10 execpt for 0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch - disable block device data integrity (DIF/DIX/T10) in default config (CONFIG_BLK_DEV_INTEGRITY) This feature is only supported by: - Enterprise SAS/SCSI HBAs and Disks - Software raid - NVMEs with metadata capabilities (most don't have this) None of which are part of any octeontx boards. - arm64 TEXT_OFFSET (0x80000) has been removed after 5.4 This will break Uimages with kernel load addresses that aren't 2MiB aligned any longer. Resulting in the kernel silently fail to boot. For Gatworks newport boards for example, the uimage kernel load and execute address is 0x20080000. These need to be changed to 0x20000000 when running kernels beyond 5.4. Tested-on: Gateworks Newport GW64xx Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
* kirkwood: increase kernel size of LinksysesPawel Dembicki2021-09-135-30/+47
| | | | | | | | | | | | | | Linksyses Audi EA3500 and Viper E4200/E4500 have too small kernel partition size when kernel 5.10 is used. This patch change kernel partition to maximum size allowed by u-boot. Kernel size is overlapping rootfs now, like mvebu Linksyses and stock partition table. It fix back to stock via sysupgrade, which was broken since 18.06. Fixes: 9808b9ae02 ("kirkwood: switch to kernel 4.9") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* realtek: add ZyXEL GS1900-24HPv2 supportSoma Zambelly2021-09-134-1/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-24HPv2 is a 24 port PoE switch with two SFP ports, similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-24HPv2 * SoC: Realtek RTL8382M 500 MHz MIPS 4KEc * Flash: 16 MiB * RAM: W631GG8MB-12 128 MiB DDR3 SDRAM (stock firmware is configured to use only 64 MiB) * Ethernet: 24x 10/100/1000 Mbps, 2x SFP 100/1000 Mbps * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 24 ethernet port link/activity LEDs (green, SoC controlled) 24 ethernet port PoE status LEDs 2 SFP status/activity LEDs (green, SoC controlled) * Buttons: 1 "RESTORE" button on front panel 1 "RESET" button on front panel * Power 120-240V AC C13 * UART: 1 serial header (J41) with populated standard pin connector on the left edge of the PCB, angled towards the side. The casing has a rectangular cutout on the side that provides external access to these pins. Pinout (front to back): + GND + TX + RX + VCC Serial connection parameters for both devices: 115200 8N1. Installation ------------ OEM upgrade method: (Possible on master once https://patchwork.ozlabs.org/project/openwrt/patch/20210624210408.19248-1-bjorn@mork.no/ is merged) * Log in to OEM management web interface * Navigate to Maintenance > Firmware > Management * If "Active Image" has the first option selected, OpenWrt will need to be flashed to the "Active" partition. If the second option is selected, OpenWrt will need to be flashed to the "Backup" partition. * Navigate to Maintenance > Firmware > Upload * Upload the openwrt-realtek-generic-zyxel_gs1900-24hp-v2-initramfs-kernel.bin file by your preferred method to the previously determined partition. When prompted, select to boot from the newly flashed image, and reboot the switch. * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/openwrt-realtek-generic-zyxel_gs1900-24hp-v2-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. U-Boot TFTP method: * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-24HPv2 is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot from the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-24hp-v2-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/openwrt-realtek-generic-zyxel_gs1900-24hp-v2-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. Signed-off-by: Soma Zambelly <zambelly.soma@gmail.com>
* sunxi: enable MUSB in A7 subtargetZhao Yu2021-09-131-0/+8
| | | | | | | like commit 78c1ed6. Without this,Some USB port on H3 baseboard can' work. So, need enable MUSB support on this target. Signed-off-by: Zhao Yu <574249312@qq.com>
* kernel: add package kmod-iio-ads1015 and remove kmod-hwmon-ads1015Christian Pointner2021-09-132-14/+15
| | | | | | | | | | | | The hwmon driver for the ADC ADS1015 has been removed in Linux 5.4 in favor of a driver in the iio system. For details see: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2c9d5b5e This fixes: https://bugs.openwrt.org/index.php?do=details&task_id=4005 Run-tested: ramips/mt76x8 (Onion Omega 2+) Signed-off-by: Christian Pointner <equinox@spreadspace.org>
* kernel: backport switchdev fix for bridge in bridge configurationsFabian Bläse2021-09-131-0/+60
| | | | | | | | | | | | | | | | | | | This patch fixes the forwarding behavior of bridge in bridge configurations with DSA. Without it, the configuration of the upper bridge might overwrite settings of the lower bridge. For example, a vlan-aware bridge with DSA interfaces in it might be offloaded to the DSA hardware. If the bridge interface itself gets slave of a different bridge without vlan filtering, the vlan filtering setting of the lower bridge is overwritten by the upper bridge, which results in an incorrect hardware configuration. This was backported from kernel 5.7. Ref: https://lore.kernel.org/netdev/20191222192235.GK25745@shell.armlinux.org.uk/ Fixes: FS#3996 Signed-off-by: Fabian Bläse <fabian@blaese.de>
* kernel: bump 5.4 to 5.4.145John Audia2021-09-1311-72/+12
| | | | | | | | | | | | Removed upstreamed: generic-backport/040-ARM-8918-2-only-build-return_address-if-needed.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.144John Audia2021-09-1315-56/+56
| | | | | | | | | | | | | Manually rebased: backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 17:23:33 +0000