aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* octeon: fix imagebuilder generation by introducing generic targetNick Hainke2022-09-242-5/+5
| | | | | | | | | | | | | The generic imagebuilder does not have a generic in the name, although this is the default naming scheme. Use bcm53xx as template for this fix. Before the fix: openwrt-imagebuilder-octeon.Linux-x86_64.tar.xz After: openwrt-imagebuilder-octeon-generic.Linux-x86_64.tar.xz Signed-off-by: Nick Hainke <vincent@systemli.org>
* x86/config-5.10: geode: add missing CONFIG_WATCHDOG_CORE optionFlorian Eckert2022-09-241-0/+1
| | | | | | | | | | | | | If this module is not set to y, then I get the following compilation error during geode build. Package kmod-w83627hf-wdt is missing dependencies for the following libraries: watchdog.ko Setting the linux CONFIG_WATCHDOG_CORE to y as in all other targets fixes this issue. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* x86/config-5.15: geode: add missing CONFIG_WATCHDOG_CORE optionFlorian Eckert2022-09-241-0/+1
| | | | | | | | | | | | | | If this module is not set to y, then I get the following compilation error during geode build. Package kmod-w83627hf-wdt is missing dependencies for the following libraries: watchdog.ko Setting the linux CONFIG_WATCHDOG_CORE to y as in all other targets fixes this issue. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* linux/x86: add missing CONFIG_WATCHDOG_CORE to *-wdtFlorian Eckert2022-09-241-4/+10
| | | | | | | | | The packages also need a dependency to watchdog core. This commit adds the needed WATCHDOG_CORE dependency. https://github.com/torvalds/linux/blob/master/drivers/watchdog/Kconfig Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ipq40xx: Add ZTE MF289FGiammarco Marzano2022-09-248-6/+465
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's a 4G Cat.20 router used by Vodafone Italy (called Vodafone FWA) and Vodafone DE\T-Mobile PL (called GigaCube). Modem is a MiniPCIe-to-USB based on Snapdragon X24, it supports 4CA aggregation. There are currently two hardware revisions, which differ on the 5Ghz radio: AT1 = QCA9984 5Ghz Radio on PCI-E bus AT2 = IPQ4019 5Ghz Radio inside IPQ4019 like 2.4Ghz Device specification -------------------- SoC Type: Qualcomm IPQ4019 RAM: 256 MiB Flash: 128 MiB SPI NAND (Winbond W25N01GV) ROM: 2MiB SPI Flash (GD25Q16) Wireless 2.4 GHz (IP4019): b/g/n, 2x2 Wireless 5 GHz: (QCA9984): a/n/ac, 4x4 HW REV AT1 (IPA4019): a/n/ac, 2x2 HW REV AT2 Ethernet: 2xGbE (WAN/LAN1, LAN2) USB ports: No Button: 2 (Reset/WPS) LEDs: 3 external leds: Network (white or red), Wifi, Power and 1 internal (blue) Power: 12 VDC, 1 A Connector type: Barrel Bootloader: U-Boot Installation ------------ 1. Place OpenWrt initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial connector GND (which is right next to the thing with MF289F MIMO-V1.0), RX, TX (refer to this image: https://ibb.co/31Gngpr). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. Stop in u-Boot (using ESC button) and run u-Boot commands: setenv serverip 192.168.0.2 setenv ipaddr 192.168.0.1 set fdt_high 0x85000000 tftp openwrt-ipq40xx-generic-zte_mf289f-initramfs-fit-zImage.itb bootm $loadaddr 5. Please make backup of original partitions, if you think about revert to stock, specially mtd16 (Web UI) and mtd17 (rootFS). Use /tmp as temporary storage and do: WEB PARITION -------------------------------------- cat /dev/mtd16 > /tmp/mtd16.bin scp /tmp/mtd16.bin root@YOURSERVERIP:/ rm /tmp/mtd16.bin ROOT PARITION -------------------------------------- cat /dev/mtd17 > /tmp/mtd17.bin scp /tmp/mtd17.bin root@YOURSERVERIP:/ rm /tmp/mtd17.bin 6. Login via ssh or serial and remove stock partitions (default IP 192.168.0.1): # this can return an error, if ubi was attached before # or rootfs part was erased before. ubiattach -m 17 # it could return error if rootfs part was erased before ubirmvol /dev/ubi0 -N ubi_rootfs # some devices doesn't have it ubirmvol /dev/ubi0 -N ubi_rootfs_data 7. download and install image via sysupgrade -n (either use wget/scp to copy the mf289f's squashfs-sysupgrade.bin to the device's /tmp directory) sysupgrade -n /tmp/openwrt-...-zte_mf289f-squashfs-sysupgrade.bin Sometimes it could print ubi attach error, but please ignore it if process goes forward. Flash Layout NAND: mtd8: 000a0000 00020000 "fota-flag" mtd9: 00080000 00020000 "0:ART" mtd10: 00080000 00020000 "mac" mtd11: 000c0000 00020000 "reserved2" mtd12: 00400000 00020000 "cfg-param" mtd13: 00400000 00020000 "log" mtd14: 000a0000 00020000 "oops" mtd15: 00500000 00020000 "reserved3" mtd16: 00800000 00020000 "web" mtd17: 01d00000 00020000 "rootfs" mtd18: 01900000 00020000 "data" mtd19: 03200000 00020000 "fota" mtd20: 0041e000 0001f000 "kernel" mtd21: 0101b000 0001f000 "ubi_rootfs" SPI: mtd0: 00040000 00010000 "0:SBL1" mtd1: 00020000 00010000 "0:MIBIB" mtd2: 00060000 00010000 "0:QSEE" mtd3: 00010000 00010000 "0:CDT" mtd4: 00010000 00010000 "0:DDRPARAMS" mtd5: 00010000 00010000 "0:APPSBLENV" mtd6: 000c0000 00010000 "0:APPSBL" mtd7: 00050000 00010000 "0:reserved1" Back to Stock (!!! need original dump taken from initramfs !!!) ------------- 1. Place mtd16.bin and mtd17.bin initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.0.2 2. Connect serial console (115200,8n1) to serial console connector (refer to the pin-out from above). 3. Connect TFTP server to RJ-45 port (WAN/LAN1). 4. rename mtd16.bin to web.img and mtd17.bin to root_uImage_s 5. Stop in u-Boot (using ESC button) and run u-Boot commands: This will erase RootFS+Web: nand erase 0x1000000 0x800000 nand erase 0x1800000 0x1D00000 This will restore RootFS: tftpboot 0x84000000 ${dir}root_uImage_s nand erase 0x1800000 0x1D00000 nand write $fileaddr 0x1800000 $filesize This will restore Web Interface: tftpboot 0x84000000 ${dir}web.img nand erase 0x1000000 0x800000 nand write $fileaddr 0x1000000 $filesize After first boot on stock firwmare, do a factory reset. Push reset button for 5 seconds so all parameters will be reverted to the one printed on label on bottom of the router Signed-off-by: Giammarco Marzano <stich86@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> (Warning: commit message did not conform to UTF-8 - hopefully fixed?, added description of the pin-out if image goes down, reformatted commit message to be hopefully somewhat readable on git-web, redid some of the gpio-buttons & leds DT nodes, etc.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for Sony NCP-HG100/CellularINAGAKI Hiroshi2022-09-2410-1/+756
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sony NCP-HG100/Cellular is a IoT Gateway with 2.4/5 GHz band 11ac (WiFi-5) wireless function, based on IPQ4019. Specification: - SoC : Qualcomm IPQ4019 - RAM : DDR3 512 MiB (H5TC4G63EFR) - Flash : eMMC 4 GiB (THGBMNG5D1LBAIT) - WLAN : 2.4/5 GHz 2T2R (IPQ4019) - Ethernet : 10/100/1000 Mbps x2 - Transceiver : Qualcomm QCA8072 - WWAN : Telit LN940A9 - Z-Wave : Silicon Labs ZM5101 - Bluetooth : Qualcomm CSR8811 - Audio DAC : Realtek ALC5629 - Audio Amp. : Realtek ALC1304 - Voice Input Processor : Conexant CX20924 - Micro Controller Unit : Nuvoton MINI54FDE - RGB LED, Fan, Temp. sensors - Touch Sensor : Cypress CY8C4014LQI - RGB LED driver : TI LP55231 (2x) - LEDs/Keys : 11x, 6x - UART : through-hole on PCB - J1: 3.3V, TX, RX, GND from tri-angle marking - 115200n8 - Power : 12 VDC, 2.5 A Flash instruction using initramfs image: 1. Prepare TFTP server with the IP address 192.168.132.100 and place the initramfs image to TFTP directory with the name "C0A88401.img" 2. Boot NCP-HG100/Cellular and interrupt after the message "Hit any key to stop autoboot: 2" 3. Perform the following commands and set bootcmd to allow booting from eMMC setenv bootcmd "mmc read 0x84000000 0x2e22 0x4000 && bootm 0x84000000" saveenv 4. Perform the following command to load/boot the OpenWrt initramfs image tftpboot && bootm 5. On the initramfs image, perform sysupgrade with the sysupgrade image (if needed, backup eMMC partitions by dd command and download to other place before performing sysupgrade) 6. Wait for ~120 seconds to complete flashing Known issues: - There are no drivers for audio-related chips/functions in Linux Kernel and OpenWrt, they cannot be used. - There is no driver for MINI54FDE Micro-Controller Unit, customized for this device by the firmware in the MCU. This chip controls the following functions, but they cannot be controlled in OpenWrt. - RGB LED - Fan this fan is controlled automatically by MCU by default, without driver - Thermal Sensors (2x) - Currently, there is no driver or tool for CY8C4014LQI and cannot be controlled. It cannot be exited from "booting mode" and moved to "normal op mode" after booting. And also, the 4x buttons (mic mute, vol down, vol up, alexa trigger) connected to the IC cannot be controlled. - it can be exited from "booting mode" by installing and executing i2cset command: opkg update opkg install i2c-tools i2cset -y 1 0x14 0xf 1 - There is a connection issue on the control by uqmi for the WWAN module. But modemmanager can be used without any issues and the use of it is recommended. - With the F2FS format, too many errors are reported on erasing eMMC partition "rootfs_data" while booting: [ 1.360270] sdhci: Secure Digital Host Controller Interface driver [ 1.363636] sdhci: Copyright(c) Pierre Ossman [ 1.369730] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.374729] sdhci_msm 7824900.sdhci: Got CD GPIO ... [ 1.413552] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit [ 1.528325] mmc0: new HS200 MMC card at address 0001 [ 1.530627] mmcblk0: mmc0:0001 004GA0 3.69 GiB [ 1.533530] mmcblk0boot0: mmc0:0001 004GA0 partition 1 2.00 MiB [ 1.537831] mmcblk0boot1: mmc0:0001 004GA0 partition 2 2.00 MiB [ 1.542918] mmcblk0rpmb: mmc0:0001 004GA0 partition 3 512 KiB, chardev (247:0) [ 1.550323] Alternate GPT is invalid, using primary GPT. [ 1.561669] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 ... [ 8.841400] mount_root: loading kmods from internal overlay [ 8.860241] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 8.863746] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 9.240465] block: attempting to load /etc/config/fstab [ 9.246722] block: unable to load configuration (fstab: Entry not found) [ 9.246863] block: no usable configuration [ 9.254883] mount_root: overlay filesystem in /dev/mmcblk0p17 has not been formatted yet [ 9.438915] urandom_read: 5 callbacks suppressed [ 9.438924] random: mkfs.f2fs: uninitialized urandom read (16 bytes read) [ 12.243332] mmc_erase: erase error -110, status 0x800 [ 12.246638] mmc0: cache flush error -110 [ 15.134585] mmc_erase: erase error -110, status 0x800 [ 15.135891] mmc_erase: group start error -110, status 0x0 [ 15.139850] mmc_erase: group start error -110, status 0x0 ...(too many the same errors)... [ 17.350811] mmc_erase: group start error -110, status 0x0 [ 17.356197] mmc_erase: group start error -110, status 0x0 [ 17.439498] sdhci_msm 7824900.sdhci: Card stuck in wrong state! card_busy_detect status: 0xe00 [ 17.446910] mmc0: tuning execution failed: -5 [ 17.447111] mmc0: cache flush error -110 [ 18.012440] F2FS-fs (mmcblk0p17): Found nat_bits in checkpoint [ 18.062652] F2FS-fs (mmcblk0p17): Mounted with checkpoint version = 428fa16b [ 18.198691] block: attempting to load /etc/config/fstab [ 18.198972] block: unable to load configuration (fstab: Entry not found) [ 18.203029] block: no usable configuration [ 18.211371] mount_root: overlay filesystem has not been fully initialized yet [ 18.214487] mount_root: switching to f2fs overlay So, this support uses ext4 format instead which has no errors. Note: - The primary uart is shared for debug console and Z-Wave chip. The function is switched by GPIO15 (Linux: 427). value: 1: debug console 0: Z-Wave - NCP-HG100/Cellular has 2x os-image pairs in eMMC. - 0:HLOS, rootfs - 0:HLOS_1, rootfs_1 In OpenWrt, the first image pair is used. - "bootipq" command in U-Boot requires authentication with signed-image by default. To boot unsigned image of OpenWrt, use "mmc read" and "bootm" command instead. - This support is for "Cellular" variant of NCP-HG100 and not tested on "WLAN" (non-cellular) variant. - The board files of ipq-wifi may also be used in "WLAN" variant of NCP-HG100, but unconfirmed and add files as for "Cellular" variant. - "NET" LED is used to indicate WWAN status in stock firmware. - There is no MAC address information in the label on the case, use the address included in UUID in the label as "label-MAC" instead. - The "CLOUD" LEDs are partially used for indication of system status in stock firmware, use they as status LEDs in OpenWrt instead of RGB LED connected to the MCU. MAC addresses: LAN : 5C:FF:35:**:**:ED (ART, 0x6 (hex)) WAN : 5C:FF:35:**:**:EF (ART, 0x0 (hex)) 2.4 GHz: 5C:FF:35:**:**:ED (ART, 0x1006 (hex)) 5 GHz : 5C:FF:35:**:**:EE (ART, 0x5006 (hex)) partition layout in eMMC (by fdisk, GPT): Disk /dev/mmcblk0: 7733248 sectors, 3776M Logical sector size: 512 Disk identifier (GUID): **** Partition table holds up to 20 entries First usable sector is 34, last usable sector is 7634910 Number Start (sector) End (sector) Size Name 1 34 1057 512K 0:SBL1 2 1058 2081 512K 0:BOOTCONFIG 3 2082 3105 512K 0:QSEE 4 3106 4129 512K 0:QSEE_1 5 4130 4641 256K 0:CDT 6 4642 5153 256K 0:CDT_1 7 5154 6177 512K 0:BOOTCONFIG1 8 6178 6689 256K 0:APPSBLENV 9 6690 8737 1024K 0:APPSBL 10 8738 10785 1024K 0:APPSBL_1 11 10786 11297 256K 0:ART 12 11298 11809 256K 0:HSEE 13 11810 28193 8192K 0:HLOS 14 28194 44577 8192K 0:HLOS_1 15 44578 306721 128M rootfs 16 306722 568865 128M rootfs_1 17 568866 3958065 1654M rootfs_data [initial work] Signed-off-by: Iwao Yuki <dev.clef@gmail.com> Co-developed-by: Iwao Yuki <dev.clef@gmail.com> [adjustments, cleanups, commit message, sending patch] Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> (dropped clk_unused_ignore, dropped 901-* patches, renamed key nodes, changed LEDs chan/labels to match func-en, made :net -> (w)wan leds) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: base-files: properly close caseTomasz Maciej Nowak2022-09-241-0/+1
| | | | | | | | Fix this occurrence during boot: /bin/board_detect: line 10: Unsupported: not found Fixes: 80baffd2aa91 (" ipq40xx: add support for Pakedge WR-1") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ipq40xx: luma_wrtq-329acn: differentiate ethernet mac addressesTomasz Maciej Nowak2022-09-241-0/+12
| | | | | | | | On OEM firmware both addresses for In and Out ports are different. Set them as such also in OpenWrt. Fixes: e24635710c7e (" ipq40xx: add support for Luma Home WRTQ-329ACN") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* apm821xx: make 5.15 kernel defaultChristian Lamparter2022-09-241-2/+1
| | | | | | 5.15 has been available for some time for testing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: refresh 5.15 configChristian Lamparter2022-09-241-2/+2
| | | | | | | | | | | use the toolchain's default CPU (464fp) as the CPU option. This fixes a CPU selection prompt which shows up now. CPU selection > 1. Generic 32 bits powerpc (POWERPC_CPU) (NEW) 2. Rely on the toolchain's implicit default CPU (TOOLCHAIN_DEFAULT_CPU) (NEW) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: fix RUTX10 Wi-Fi woesKasparas Elzbutas2022-09-242-30/+8
| | | | | | | | | | | | | This partially reverts: commit cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") U-Boot on these devices mangles the device tree, so nvmem-cell type calibration doesn't work. Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") Signed-off-by: Kasparas Elzbutas <elzkas@gmail.com> (added reference to commit, rewrote commit message) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: intel-microcode: update to 20220809Christian Lamparter2022-09-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Debian's changelog by Henrique de Moraes Holschuh <hmh@debian.org>: * New upstream microcode datafile 20220809 * Fixes INTEL-SA-00657, CVE-2022-21233 Stale data from APIC leaks SGX memory (AEPIC leak) * Fixes unspecified errata (functional issues) on Xeon Scalable * Updated Microcodes: sig 0x00050653, pf_mask 0x97, 2022-03-14, rev 0x100015e, size 34816 sig 0x00050654, pf_mask 0xb7, 2022-03-08, rev 0x2006e05, size 44032 sig 0x000606a6, pf_mask 0x87, 2022-04-07, rev 0xd000375, size 293888 sig 0x000706a1, pf_mask 0x01, 2022-03-23, rev 0x003c, size 75776 sig 0x000706a8, pf_mask 0x01, 2022-03-23, rev 0x0020, size 75776 sig 0x000706e5, pf_mask 0x80, 2022-03-17, rev 0x00b2, size 112640 sig 0x000806c2, pf_mask 0xc2, 2022-03-19, rev 0x0028, size 97280 sig 0x000806d1, pf_mask 0xc2, 2022-03-28, rev 0x0040, size 102400 sig 0x00090672, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 sig 0x00090675, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 sig 0x000906a3, pf_mask 0x80, 2022-06-15, rev 0x0421, size 216064 sig 0x000906a4, pf_mask 0x80, 2022-06-15, rev 0x0421, size 216064 sig 0x000a0671, pf_mask 0x02, 2022-03-17, rev 0x0054, size 103424 sig 0x000b06f2, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 sig 0x000b06f5, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uml: add Kernel 5.15 support via testingChristian Lamparter2022-09-247-1/+597
| | | | | | Add the latest default Kernel for testing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uml: fix 5.10 buildChristian Lamparter2022-09-241-0/+32
| | | | | | | | | | | | | the 5.10 uml build currently breaks with: /usr/bin/ld: arch/um/os-Linux/signal.o: in function `sigusr1_handler': arch/um/os-Linux/signal.c:141: undefined reference to `uml_pm_wake' But there's an upstream fix for this. Backport the fix for now but also let upstream know so it finds its way through the -stable releases. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uml: headers are not exportableChristian Lamparter2022-09-241-1/+1
| | | | | | | | | | | | | | | | | | When building UML this showed up as of late (2022-09-01): | Makefile:1335: *** Headers not exportable for UML. Stop. This message popped up because of an upstream patch that fixed this error not showing up sooner. For more information see: <https://lore.kernel.org/lkml/20220901011252.550830-1-masahiroy@kernel.org/T/> Now, I don't think we can just skip the kernel headers. Some userspace applications are going to need these. So, The next best alternative I can think of, is to go with the headers by the host arch the UML is compiled for. (Technically, ARCH= should be safe for all other targets as well... But let's not poke a hornet's nest) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: fix parameter reading for AC_BE tx burstingAlberto Martinez-Alvarez2022-09-241-2/+2
| | | | | | | | | | | | | | | The "tx_burst" option which should control the value was expecting more of a list and hence tx_queue_data2_burst value wasn't updated. Yes, it would make sense to have a list for this, the existing code only updates tx_queue_data2_burst and not the other tx_queue_data[0134]_burst values. Signed-off-by: Alberto Martinez-Alvarez <amteza@gmail.com> (formatted commit message, wrote extra information into commit, moved tx_burst to existing json_get_vars) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: Move some IOMMU options to genericHauke Mehrtens2022-09-2412-16/+10
| | | | | | | | | | | | This adds some missing IOMMU related options for x86/64 and moves some of them to generic for all targets. On x86 IOMMU_DEFAULT_DMA_LAZY is used by default, on all other platforms IOMMU_DEFAULT_DMA_STRICT is the default. we just follow the default kernel configuration here. Fixes: 8fea4a102ccd ("x86/64: enable IOMMU support") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: switch to 5.15 as default kernelNick Hainke2022-09-241-2/+1
| | | | | | | | | | | | | | | | | | | The 5.15 kernel has new interesting features like MGLRU. Most of the targets already have added support for testing kernel 5.15 since April 2022. Set 5.15 as default for all subtargets. Testing support was added here: - ae6bfb7d67c1 ("ath79: tiny: add 5.15 support for tiny subtarget") - 9a0155bc4fa3 ("ath79: add 5.15 support for generic subtarget") - 5af9aafabbc0 ("ath79: mikrotik: add 5.15 support for mikrotik subtarget") - f3fa68e5153b ("ath79: nand: add 5.15 support for nand subtarget") Tested on: - Nanostation M5 XM (tiny) - TP-Link EAP-225 Outdoor (generic) - TP-Link CPE210 (generic) Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: fix mac-address-increment on driver probe deferWill Moss2022-09-232-0/+62
| | | | | | | | Fixes situations where MAC address gets incremented multiple times if device initialization fails at first and then is deferred. Fixes: d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to generic implementation") Signed-off-by: Will Moss <willormos@gmail.com>
* mac80211: remove broken CFG80211_WEXT select from the r8723bs driverFelix Fietkau2022-09-231-0/+10
| | | | | | Fixes a build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: mark lib80211 as hiddenFelix Fietkau2022-09-231-0/+1
| | | | | | | Prevents build errors by ensuring that it is only selected when a wext based driver that needs it is also selected Signed-off-by: Felix Fietkau <nbd@nbd.name>
* generic: 5.15: add missing PAGE_POOL_STATS configChristian Marangi2022-09-231-0/+1
| | | | | | Add new PAGE_POOL_STATS config backported for the mtk offload patches. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: pick patches for MediaTek Ethernet from linux-nextDaniel Golle2022-09-2240-19/+5839
| | | | | | | | | | | | | | | | | | | Pick patches with several fixes and improvements, preparation for upcoming WED (TX) [1] as well as basic XDP support [2] with MediaTek's Filogic SoCs to the mtk_eth_soc driver. Also pick follow-up patch fixing Ethernet on MT7621 [3]. Tested on Bananapi BPi-R3 (MT7986), Bananapi BPi-R64 (MT7622), Bananapi BPi-R2 (MT7623), MikroTik RouterBoard M11G (MT7621). [1]: https://patchwork.kernel.org/project/netdevbpf/list/?series=662108&state=* [2]: https://patchwork.kernel.org/project/netdevbpf/list/?series=675368&state=* (the first part of the series adding wed nodes to mt7986a.dtsi was applied to the copy of mt7986a.dtsi in our tree) [3]: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=5e69163d3b9931098922b3fc2f8e786af8c1f37e Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* prism54-firmware: set DL_DIR to package specific subdirectoryMichael Pratt2022-09-221-0/+2
| | | | | | | | | | | | | | This package downloads raw files which have names that are not corresponding to the name and version of the package as it is defined in the Makefile. Use the option DL_SUBDIR to set the DL_DIR to be a subdirectory named with PKG_NAME and PKG_RELEASE to better organize the downloads. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* b43legacy-firmware: set DL_DIR to package specific subdirectoryMichael Pratt2022-09-221-0/+2
| | | | | | | | | | | | | | This package downloads raw files which have names that are not corresponding to the name and version of the package as it is defined in the Makefile. Use the option DL_SUBDIR to set the DL_DIR to be a subdirectory named with PKG_NAME and PKG_VERSION to better organize the downloads. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath10k-ct-firmware: set DL_DIR to package specific subdirectoryMichael Pratt2022-09-221-0/+2
| | | | | | | | | | | | | | This package downloads raw files which have names that are not corresponding to the name and version of the package as it is defined in the Makefile. Use the option DL_SUBDIR to set the DL_DIR to be a subdirectory named with PKG_NAME and PKG_VERSION to better organize the downloads. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* acx-mac80211: set DL_DIR to package specific subdirectoryMichael Pratt2022-09-221-0/+2
| | | | | | | | | | | | | | | | | This package downloads raw files which have names that are not corresponding to the name and version of the package as it is defined in the Makefile. Use the option DL_SUBDIR to set the DL_DIR to be a subdirectory named with PKG_NAME and PKG_SOURCE_DATE to better organize the downloads. Define PKG_VERSION here using PKG_SOURCE_DATE. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* scripts/dl_cleanup: add support for subdirectoriesMichael Pratt2022-09-221-9/+18
| | | | | | | | | | | Allow comparing subdirectories exactly like files. Handle a corner case where the new subdirectory has the same tarball inside of it as the one that was downloaded before a subdirectory for that package was established. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* rules.mk: add option to download files into a subdirectoryMichael Pratt2022-09-221-1/+1
| | | | | | | | | | | | | | | | | | Some packages download a single raw file or set of raw files instead of an archive. The filenames of these download files have names and version numbers that do not directly correspond to the name and version of the package as it is defined in its Makefile. To better organize downloaded files, this adds the option of creating a subdirectory in the download directory for these files that can be named with package specific variables. DL_DIR is now a recursively expanded variable since the value now depends on whether DL_SUBDIR is defined. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* base-files: Actually set default nameOlliver Schinagl2022-09-221-1/+1
| | | | | | | | | | | The currently used shell expansion doesn't seem to exist [0] and also does not work. This surely was not intended, so lets allow default naming to actually work. [0]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html Fixes: be09c5a3cd65 ("base-files: add board.d support for bridge device") Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* iwinfo: update to the latest versionFelix Fietkau2022-09-221-3/+3
| | | | | | | | | | 46f04f3808e8 devices: add MediaTek MT7986 WiSoC b3e08c8b5a8f ops: make support for wireless extensions optional 1f695d9c7f82 nl80211: allow phy names that don't start with 'phy' b7f9f06e1594 nl80211: fix phy/netdev index lookup 4a43b0d40ba5 nl80211: look up the phy name instead of assuming name == phy<idx> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add ubus notification on sta authorizedFelix Fietkau2022-09-223-2/+79
| | | | | | | Also include the station auth_type in the ubus and log message in order to detect, if clients used FT or FILS to associate Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: disable drivers that rely on wireless extensionsFelix Fietkau2022-09-223-0/+5
| | | | | | They are unmaintained and don't work properly with current wifi scripts Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: disable wireless extensions only when neededFelix Fietkau2022-09-226-12/+28
| | | | | | They are only needed by a few very old drivers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 5.15 to 5.15.69John Audia2022-09-229-174/+174
| | | | | | | | | | All patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.144John Audia2022-09-222-7/+7
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: Reorder kernel configurationHauke Mehrtens2022-09-221-3/+2
| | | | | | | | This was done by running this: ./scripts/kconfig.pl '+' target/linux/generic/config-5.15 /dev/null > target/linux/generic/config-5.15-new mv target/linux/generic/config-5.15-new target/linux/generic/config-5.15 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Deactivate CONFIG_DEFAULT_FQ_PIE by defaultHauke Mehrtens2022-09-222-0/+2
| | | | | | | | When building OpenWrt with CONFIG_ALL_KMODS the kernel build will ask for CONFIG_DEFAULT_FQ_PIE option. This deactivates it by default. Fixes: c3e4a0d99b97 ("kernel: netsupport: Add FQ-PIE as an optional sched kmod and extract PIE") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add VFIO kernel packagesNicola Corna2022-09-211-0/+43
| | | | | | Add kmod-vfio and kmod-vfio-pci packages. Signed-off-by: Nicola Corna <nicola@corna.info>
* x86/64: enable IOMMU supportNicola Corna2022-09-212-0/+38
| | | | | | | | | | | Enable IOMMU support for Intel and AMD x86 platforms. With this, when the vfio module is present, physical PCI devices can be passed to VMs, for example with `qemu-system-x86_64 -device vfio-pci,host=05:00.0 ...`. IOMMU support increases the kernel size by a small amount (~370KB, from 5239840 B to 5611200 B, a ~7% increase in size). Signed-off-by: Nicola Corna <nicola@corna.info>
* arm-trusted-firmware-mvebu: stop cluttering Image BuilderTomasz Maciej Nowak2022-09-211-21/+20
| | | | | | | | | | | | | | All contents of staging_dir/image are included in Image Builder (IB) in case some binary needs to be included in final image. But in case of this package, all sources are stored there and those clutter the final tarball of IB for no reason. Those sources are not used during image creation and are just dead weight. To put it in perspective, the IB for 21.02.0 is 158 MiB, 22.03.0-rc6 is 366 MiB and snapshot is over 620 MiB! To fix it, put them in package build directory, so they won't end up included in IB tarball. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> Reviewed-by: Andre Heider <a.heider@gmail.com>
* bcm4908: fix -EPROBE_DEFER support in bcm4908_enetRafał Miłecki2022-09-212-1/+58
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: update U-Boot NVMEM driverRafał Miłecki2022-09-206-0/+118
| | | | | | | 1. Fix casting 2. Support DT-defined variables Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: backport mtd parser for Broadcom's U-Boot partitionRafał Miłecki2022-09-202-0/+138
| | | | | | | Broadcom's U-Boot contains environment data blocks. They need to be found (offsets aren't predefined) to access env variables. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: fix Unifi 6LR network configStijn Tintel2022-09-201-2/+1
| | | | | | | | | | | | | | | | When the v1 and v2 variants of the U6LR were introduced, the board network config was not adapted to the new device names. Due to this, the wrong network config is applied during initial boot. The resulting config has lan, wan and a switch, while this device only has a single ethernet interface without a switch. Fix this by using a wildcard that matches all the variants. Fixes: 15a02471bb85 ("mediatek: new target mt7622-ubnt-unifi-6-lr-v1") Fixes: 5c8d3893a78f ("mediatek: new target ubnt_unifi-6-lr-v1-ubootmod") Fixes: 31d86a1a1192 ("mediatek: add Ubiquiti UniFi 6 LR v2 targets") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Daniel Golle <daniel@makrotopia.org>
* ci: show build failures directly in job log outputPetr Štetiar2022-09-203-5/+20
| | | | | | | | | | | | | | | | | | | | | Instead of waiting for complete workflow finish, then downloading the artifacts, unpacking them and inspecting them, lets try to make the build failure immediately visible in the log output: ====== Make errors from logs/target/linux/compile.txt ====== * Legacy (non-UHI/non-FIT) Boards * Support MIPS SEAD-3 boards (LEGACY_BOARD_SEAD3) [N/y/?] (NEW) Error in reading or end of file. make[6]: *** [scripts/kconfig/Makefile:77: syncconfig] Error 1 make[5]: *** [Makefile:616: syncconfig] Error 2 make[4]: *** [Makefile:736: include/config/auto.conf.cmd] Error 2 make[3]: *** [Makefile:24: build_dir/target-mipsel-openwrt-linux-musl_musl/linux-ramips_mt7620/linux-5.15.62/.modules] Error 2 make[2]: *** [Makefile:11: compile] Error 2 time: target/linux/compile#30.09#11.30#37.92 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ci: move scripts into separate directoryPetr Štetiar2022-09-202-1/+1
| | | | | | So it's clean and tidy. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: backport MTK ethernet/WLAN offload fixesFelix Fietkau2022-09-203-0/+122
| | | | | | Fixes issues with offloading to WED, especially with VLAN bridges involved Signed-off-by: Felix Fietkau <nbd@nbd.name>
* xdp-tools: update to version 1.2.8Daniel Golle2022-09-201-2/+2
| | | | | | | | | | | | | 82628d8 libxdp: Fix resource leaks 7fb0af0 libxdp: always clone program fd before taking ownership of it d8cd007 headers: Update kernel btf.h header file 2265125 (tag: v1.2.7) xdp-filter: Update examples in documentation 2b65008 libxdp: Fix libxdp compilation error 2387514 xsk: remove unused variable outstanding_tx 00b5a95 Fix section names in xsk programs d4ff1f9 (tag: v1.2.8) Bump TOOLS_VERSION to 1.2.8 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: update to 2022-07-29David Bauer2022-09-2042-266/+242
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | b704dc72e tests: sigma_dut and updated ConfResult value for Configurator failures 89de431f2 DPP: Add config response status value to DPP-CONF-SENT 10104915a tests: sigma_dut and DPP PB session overlap 80d5e264c Enhance QCA vendor roam event to indicate MLO links after reassociation 662249306 Update copyright notices for the QCA vendor definitions 8adcdd659 tests: Temporary workaround for dpp_chirp_ap_5g ddcd15c2d tests: Fix fuzzing/sae build 7fa67861a tests: Fix p2p_channel_avoid3 ee3567d65 tests: Add more time for scan/connection 1d08b238c nl80211: Allow more time for the initial scan with 6 GHz ac9e6a2ab tests: Allow 6 GHz opclasses in MBO checks faf9c04cb Remove a host of unnecessary OPENSSL_IS_BORINGSSL ifdefs b9cd5a82f Always process pending QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH data ef4cd8e33 QoS: Use common classifier_mask for ipv4/ipv6 93be02592 Add fixed FDD mode to qca_btc_chain_mode QCA vendor attribute e7cbfa1c1 tests: sigma_dut and DPP Enrollee unsupported curves 5565fbee2 DPP: Check Enrollee supported curves when building Config Response ceae05cec tests: sigma_dut and DPP MUDURL setting for hostapd 4cfb484e9 DPP: Allow dpp_controller_start without arguments in CLIs c97000933 Fix ifdef condition for imsi_privacy_cert 2a9a61d6c tests: SAE with extended key AKM e35f6ed1d tests: More detailed report on SAE PMKSA caching error case f70db167a SAE: Derive a variable length PMK with the new AKM suites 91010e6f6 SAE: Indicate AKM suite selector in commit for new AKM suites e81ec0962 SAE: Use H2E unconditionally with the new AKM suites f8eed2e8b SAE: Store PMK length and AKM in SAE data 9dc4e9d13 SAE: EAPOL-Key and key/MIC length information for the new AKM suites a32ef3cfb SAE: Driver capability flags for the new SAE AKM suites 91df8c9c6 SAE: Internal WPA_KEY_MGMT_* defines for extended key AKMs 5c8a714b1 SAE: Use wpa_key_mgmt_sae() helper 5456b0f26 Define new RSN AKM suite selector values def33101c DPP: Clear push button announcement state on wpa_supplicant FLUSH 35587fa8f tests: DPP Controller/Relay with need to discover Controller d22dfe918 DPP: Event message for indicating when Relay would need a Controller ca7892e98 tests: DPP Relay and adding/removing connection to a Controller bfe3cfc38 DPP: Allow Relay connections to Controllers to be added and removed 808834b18 Add a comparison function for hostapd_ip_addr f7763880b DPP: Advertise Configurator connectivity on Relay automatically ff7cc1d49 tests: DPP Relay and dynamic Controller addition ca682f80a DPP: Dynamic Controller initiated connection on Relay d2388bcca DPP: Strict validation of PKEX peer bootstrapping key during auth a7b8cef8b DPP3: Fix push button boostrapping key passing through PKEX 69d7c8e6b DPP: Add peer=id entry for PKEX-over-TCP case b607d2723 tests: sigma_dut and DPP PB Configurator in wpa_supplicant 1ff9251a8 DPP3: Push button Configurator in wpa_supplicant b94e46bc7 tests: PB Configurator in wpa_supplicant ca4e82cbf tests: sigma_dut DPP/PKEX initiator as Configurator over TCP and Wi-Fi e9137950f DPP: Recognize own PKEX Exchange Request if it ends up being received 692956446 DPP: Note PKEX code/identifier deletion in debug log dfa9183b1 tests: DPP reconfig after Controller-initiated operation through Relay ae4a3a6f6 DPP: Add DPP-CONF-REQ-RX event for Controller 17216b524 tests: sigma_dut DPP/PKEX initiator as Configurator (TCP) through Relay fb2937b85 DPP: Allow Controller to initiate PKEX through Relay 15af83cf1 DPP: Delete PKEX code and identifier on success completion of PKEX d86ed5b72 tests: Allow DPP_PKEX_REMOVE success in dpp_pkex_hostapd_errors 0a4f391b1 tests: sigma_dut and DPP Connector Privacy 479e412a6 DPP3: Default value for dpp_connector_privacy 7d12871ba test: DPP Private Peer Introduction protocol 148de3e0d DPP3: Private Peer Introduction protocol 786ea402b HPKE base mode with single-shot API f0273bc81 OpenSSL: Remove a forgotten debug print f2bb0839f test: DPP 3rd party config information 68209ddbe DPP: Allow 3rd party information to be added into config object 0e2217c95 DPP: Allow 3rd party information to be added into config request obj 3d82fbe05 Add QCA vendor subcommand and attributes for SCS rule configuration 16b62ddfa QCA vendor attribute for DBAM configuration 004b1ff47 tests: DPP Controller initiating through Relay 451ede2c3 DPP: Allow AP/Relay to be configured to listed for new TCP connections 248654d36 tests: sigma_dut DPP PB test cases 697b7d7ec tests: DPP push button 7bbe85987 DPP3: Allow external configuration to be specified on AP for PB 8db786a43 DPP3: Testing functionality for push button announcements 37bccfcab DPP3: Push button bootstrap mechanism a0054fe7c Add AP and STA specific P802.11az security capabilities (vendor command) 159e63613 QCA vendor command for CoAP offload processing 3b7bb17f6 Add QCA vendor attribute for TIM beacon statistics 09a281e52 Add QCA vendor interface for PASN offload to userspace 809fb96fa Add a vendor attribute to configure concurrency policy for AP interface a5754f531 Rename QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY 085a3fc76 EHT: Add 320 channel width support bafe35df0 Move CHANWIDTH_* definitions from ieee80211_defs.h to defs.h 92f549901 tests: Remove the 80+80 vs. 160 part from wpa2_ocv_ap_vht160_mismatch c580c2aec tests: Make OCV negative test error cases more robust 3c2ba98ad Add QCA vendor event to indicate driver recovery after internal failures 6b461f68c Set current_ssid before changing state to ASSOCIATING 8dd826741 QCA vendor attribute to configure direct data path for audio traffic 504be2f9d QCA vendor command support to get WLAN radio combinations d5905dbc8 OCV: Check the Frequency Segment 1 Channel Number only on 80+80 MHz Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-12 00:03:14 +0000