aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq-wifi: bump to latest git HEAD and add 8devices boardsMantas Pucka2023-03-171-3/+7
| | | | | | | | | 2dae618 ipq-wifi: update 8devices Jalapeno BDF 08e92db ipq-wifi: update 8devices Habanero BDF Signed-off-by: Mantas Pucka <mantas@8devices.com> [ split ipq40xx changes in separate commit ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* layerscape: switch to Kernel 5.15 by defaultPaul Spooren2023-03-171-2/+3
| | | | | | | Getting ready for the next release. Tested-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* rpcd: bump to latest git HEADChristian Marangi2023-03-171-4/+4
| | | | | | | | | d978830 rc: add option to get info for a single script in list method 632b4fc rc: add option to skip running check for list method 5577db9 rc: add support for scanning USE_PROCD and skip running if not supported 4de3f02 rc: fix and improve script scanning START and STOP Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* toolchain/gcc: enable zstd supportAndre Heider2023-03-171-1/+4
| | | | | | | | | | | | | LTO object files will now be compressed using zstd. Compressing debug sections with zstd will have to wait for GCC 13, which adds support for -gz=zstd. NOTE: wiping the ccache is strongly recommended, not doing so might yield build error later on: "lto1: internal compiler error: original not compressed with zstd" Signed-off-by: Andre Heider <a.heider@gmail.com>
* toolchain/binutils: enable zstd supportAndre Heider2023-03-171-1/+1
| | | | | | Debug sections can now be compressed using zstd. Signed-off-by: Andre Heider <a.heider@gmail.com>
* bcm4908: add HVC workaround for booting kernel 5.15Rafał Miłecki2023-03-161-0/+30
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: include usbport triggerRafał Miłecki2023-03-161-1/+2
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: backport v6.4 pending DTS changesRafał Miłecki2023-03-1618-2/+1582
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bmips: tweak Kconfig optionsÁlvaro Fernández Rojas2023-03-163-16/+49
| | | | | | Add patch to reduce and improve selected bmips kernel config options. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: irq-bcm6345-l1: register memory regionÁlvaro Fernández Rojas2023-03-161-0/+38
| | | | | | | Add new patch sent upstream for requesting the memory region in the bcm6345-l1 interrupt controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: update patches sent upstreamÁlvaro Fernández Rojas2023-03-162-20/+42
| | | | | | Update bmips patches with the latest version sent upstream Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* include: autotools: Add dummy GTKDOCIZEHauke Mehrtens2023-03-161-1/+2
| | | | | | | | | autoreconf wants to use the gtkdocize tool now if a configure.ac file defines GTK_DOC_CHECk(). OpenWrt does not ship the gtkdocize tool, just use true instead. This fixes the build of some applications like guntls. Fixes: 030447b8f4c7 ("tools/autoconf: bump to 2.71") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/autoconf: ensure relocatabilityJo-Philipp Wich2023-03-161-2/+5
| | | | | | | | | | | Upstream introduced a new `trailer.m4` macro file referenced by the absolute build path of autoconf. Make sure that this is covered by the `000-relocatable.patch` as well. This should fix various SDK build failures related to autoconf. Fixes: 030447b8f4 ("tools/autoconf: bump to 2.71") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* firmware: ipq-wifi: use project branch and drop local fileChristian Marangi2023-03-1536-5/+8
| | | | | | | Source BDF files out of project dedicated repository and drop local file from openwrt main repository. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ramips: add support for TP-Link Archer AX23 v1David Bauer2023-03-154-0/+223
| | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: MediaTek MT7621 DAT RAM: 128MB DDR3 (integrated) FLASH: 16MB SPI-NOR () WiFi: MediaTek MT7905 + MT7975 (2.4 / 5 DBDC) 802.11ax SERIAL: 115200 8N1 LEDs - (3V3 - GND - RX - TX) - ETH ports Installation ------------ Upload the factory image using the Web-UI. Web-Recovery ------------ The router supports a HTTP recovery mode by holding the reset-button when powering on. The interface is reachable at 192.168.0.1 and supports installation using the factory image. Signed-off-by: David Bauer <mail@david-bauer.net>
* firmware-utils: update to latest HEADDavid Bauer2023-03-151-3/+3
| | | | | | | | | | | | | | | | a2c80c5 tplink-safeloader: add Archer AX23 3c04ecf tplink-safeloader: add Cloud image detection 87e593d tplink-safeloader: add QNEW image detection 34fbf48 tplink-safeloader: add vendor info support d86cc1b tplink-safeloader: refactor image ingestion 5d3a14a tplink-safeloader: ignore NULLs in version info 71ddbcd tplink-safeloader: don't end-pad sysupgrade file a29817e tplink-safeloader: stop at nameless partition 0c8a724 tplink-safeloader: replace hardcoded offsets b82a521 tplink-safeloader: use enum for table types 201a6c0 tplink-safeloader: stricter free_image_partition() Signed-off-by: David Bauer <mail@david-bauer.net>
* odhcp6c: add "verbose" optionMark Mentovai2023-03-142-3/+6
| | | | | | | | | odhcp6c logs messages related to its activity when invoked with -v, but there is no way to configure this from within OpenWrt. This adds a UCI option to turn on odhcp6c logging, disabled by default. To enable, set, for example, network.wan6.verbose = 1. Signed-off-by: Mark Mentovai <mark@mentovai.com>
* imagebuilder: allow to specific ROOTFS_PARTSIZEPaul Spooren2023-03-141-1/+3
| | | | | | | | | | | Setting this options modifies the rootfs size of created images. When installing a large number of packages it may become necessary to increase the size to have enough storage. This option is only useful for supported devices, i.e. with an attached SD Card or installed on a hard drive. Signed-off-by: Paul Spooren <mail@aparcar.org>
* realtek: switch to Kernel 5.15 by defaultPaul Spooren2023-03-141-2/+1
| | | | | | | | | Getting ready for the next release. Tested-by: Sander Vanheule <sander@svanheule.net> Tested-by: Olliver Schinagl <oliver@schinagl.nl> Tested-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* tools/libtool: bump to 2.4.7Rosen Penev2023-03-139-242/+18
| | | | | | | | Remove upstreamed patch and refresh others. Signed-off-by: Rosen Penev <rosenp@gmail.com> [rebased and refreshed patches again] Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/libtool: bump to 2.4.6Eneas U de Queiroz2023-03-1310-326/+395
| | | | | | | | | | | | | | | | | | | | | | | | | | | This updates libtool to its current release, from 2015. Current patches were renumbered and given a description text. The fix in 160-passthrough-ssp.patch is no longer needed. A patch to speed up build was cherry-picked, and another openwrt specific patch was needed to not use quotes in $(SHELL), to acommodate our "SHELL=/usr/bin/env bash" usage. The already present call to ./bootstrap ensures that generated files are refreshed, so the patches are applied only to their sources. Also, that bootstrap call was adjusted to run at the appropriate time when QUILT=1. References below are relevant commits to upstream libtool regarding some of the changes to patches. This commit is being reapplied after previous revertion, and after some editing. The fix for the issue that prompted reverting is the parent of this commit. Ref: 435cb8d71 ("libtoolize: simplify runtime by substituting pkgauxdir") Ref: 3cf11cfe2 ("libtoolize: rewritten over funclib.sh instead of general.m4sh") Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> [refactored to simplify patch changes, expanded patches, added upstream references] Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/libtool: fix hard-coded pathsSebastian Kemper2023-03-131-12/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | libtoolize hardcodes some paths. This is fine when building libtool and then using it (for example in OpenWrt's buildroot). But when using an SDK the paths are most likely different. For example, when building util-linux within an SDK we're greeted with the following message: libtoolize: error: $pkgauxdir is not a directory: '/path/to/openwrt/staging_dir/host/share/libtool/build-aux' This is because staging_dir/host/bin/libtoolize contains the following hard-coded paths from when the SDK was built in the first place: prefix="/path/to/openwrt/staging_dir/host" datadir="/path/to/openwrt/staging_dir/host/share" pkgauxdir="/path/to/openwrt/staging_dir/host/share/libtool/build-aux" pkgltdldir="/path/to/openwrt/staging_dir/host/share/libtool" aclocaldir="/path/to/openwrt/staging_dir/host/share/aclocal" This commits updates 000-relocatable.patch to correct the paths, relative to "$STAGING_DIR_HOST". Ref: 96e05e2e3 ("libtool: Revert "libtool: bump to 2.4.6"") Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> [adapted to older libtool version before bumping, use STAGING_DIR_HOST] Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/libtool: add commit messages to patchesMichael Pratt2023-03-136-0/+71
| | | | | | | | | | | | Add commit messages to patches as intended by the last bump to libtool which had to be reverted. This allows for a cleaner diff later, removing this clutter from the complex changes to patches that are required to bump to the latest libtool version. Ref: c377d874b ("libtool: bump to 2.4.6") Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/libtool: refresh patchesMichael Pratt2023-03-133-11/+8
| | | | | | | | | Preparation for bumping libtool several versions at once, which includes some complex changes to patches. Remove an empty line change from a patch. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/automake: bump to 1.16.5Michael Pratt2023-03-133-65/+21
| | | | | | | | | | | | | | | | | | | | | Automake releases 1.16.2 to 1.16.5 are major releases, the two before are minor releases. The first patch needed rewriting, some lines moved to be consistent with the same change upstream in other files. This also simplifies the patch. Second patch refreshed. Links to changelogs in order, oldest to newest. Link: https://lists.gnu.org/archive/html/info-gnu/2018-02/msg00008.html Link: https://lists.gnu.org/archive/html/info-gnu/2018-03/msg00002.html Link: https://lists.gnu.org/archive/html/info-gnu/2020-03/msg00009.html Link: https://lists.gnu.org/archive/html/info-gnu/2020-11/msg00005.html Link: https://lists.gnu.org/archive/html/info-gnu/2021-07/msg00013.html Link: https://lists.gnu.org/archive/html/info-gnu/2021-10/msg00000.html Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/autoconf: bump to 2.71Michael Pratt2023-03-134-128/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | Autoconf release 2.71 is a bugfix release of 2.70 Links provided are the changelog of 2.70 [1] [2] and the announcement of 2.71 [3] The first patch needed to be rewritten. Some of the lines in the patch were moved to be consistent with the same change added upstream in other similar files. Second and third patches are no longer needed, Emacs can now be disabled at the configure stage, and support for musl was added upstream. The patch now causes help2man to be required for installing man pages, but we don't need them. There is no way to disable man pages build with the configure script, so use make to touch the files with the build target install-man1. Link: https://lists.gnu.org/archive/html/autotools-announce/2020-12/msg00001.html Link: https://lwn.net/Articles/839395 Link: https://lists.gnu.org/archive/html/info-gnu/2021-01/msg00017.html Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/autoconf-archive: bump to 2022.09.03Michael Pratt2023-03-131-2/+2
| | | | | | | | Changelog included in package. Link to announcement. Link: https://lists.gnu.org/archive/html/info-gnu/2022-09/msg00004.html Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/automake: use make variable to generate aclocal symlinksMichael Pratt2023-03-131-5/+8
| | | | | | | | | | | | | Instead of having a somewhat random list of aclocal symlinks which are named with the API versioning scheme, install a symlink for every API version since 1.11 (the first release after Automake was moved to git) using the API version number from the version of automake that is currently in openwrt. Automake API versioning does not include the patch level number. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/automake: clean up build recipesMichael Pratt2023-03-131-4/+4
| | | | | | | | | | | | | | | | The configure option datarootdir defaults to PREFIX/share. The Host/Clean define should be Host/Uninstall otherwise it is removing the build directory before there is a chance to try "make uninstall" in that directory. Host/Clean/Default is no longer defined. Consolidate the install stage with Host/Uninstall, since it is essentially uninstalling before installing. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/autoconf: clean up build recipesMichael Pratt2023-03-131-12/+4
| | | | | | | | | | | | | | | | The configure option datarootdir defaults to PREFIX/share. The Host/Clean define should be Host/Uninstall otherwise it is removing the build directory before there is a chance to try "make uninstall" in that directory. Host/Clean/Default is no longer defined. Use default build recipes defined in host-build.mk instead of custom ones that are equivalent. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/autoconf-archive: clean up build recipesMichael Pratt2023-03-131-14/+2
| | | | | | | | | | | | | | | | The configure option datarootdir defaults to PREFIX/share. The Host/Clean define should be Host/Uninstall otherwise it is removing the build directory before there is a chance to try "make uninstall" in that directory. Host/Clean/Default is no longer defined. Use default build recipes defined in host-build.mk instead of custom ones that are equivalent. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* build: disable automake dependency trackingMichael Pratt2023-03-132-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent versions of Automake have changed dependency tracking significantly (reference commit below) causing breakage in some package builds when using newer Automake with packages that need autoreconf that were bootstrapped with an old version of Automake. Those changes cause a great inconsistency between packages over time where some packages may or may not use this feature, and may or may not update the .ac and .am files to work with the new methods. This problem might exist in many packages where autoreconf is not currently required, but would cause build failure if autoreconf is used. Fortunately, this feature is practically useless for the purposes of Openwrt and the average developer, so we can disable it. GNU Automake manual states in part: "Because dependencies are only computed as a side-effect of compilation... no dependency information exists the first time a package is built... dependency tracking is completely useless for one-time builds..." A nice side-effect is that build times are slightly faster. Ref: 6a675ef17edf7109da189f5ae70e2dc6b7665896 (automake.git) Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: fix user LED glow on Mikrotik 911 Lite boardsLech Perczak2023-03-121-1/+1
| | | | | | | | | | GPIO3, to which the user LED is connected on RB911-Lite boards seems to still sink current, even when driven high. Enabling open drain for this pin fixes this behaviour and gets rid of the glow when LED is set to off, so enable it. Fixes: 43c7132bf8e7 ("ath79: add support for MikroTik RouterBOARD 911 Lite2/Lite5") Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* elfutils: update to 1.89Nick Hainke2023-03-122-4/+6
| | | | | | | | | | Release Notes: https://sourceware.org/pipermail/elfutils-devel/2023q1/006023.html Refresh patch: - 003-libintl-compatibility.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* tools/elfutils: update to 1.89Nick Hainke2023-03-121-2/+2
| | | | | | | Release Notes: https://sourceware.org/pipermail/elfutils-devel/2023q1/006023.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* strace: update to 6.2Nick Hainke2023-03-101-2/+2
| | | | | | | Release Notes: https://github.com/strace/strace/releases/tag/v6.2 Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: refactor devolo WiFi pro image definitionsDavid Bauer2023-03-101-18/+11
| | | | | | | | Reuse common parts for the devolo WiFi pro series. The series is discontinued and we support all existing devices, so changes due to new revisions or models are highly unlikely Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: modules: add missing kmod-mdio-devres for lan743xHauke Mehrtens2023-03-101-1/+1
| | | | | | | This fixes a build problem on some targets. Fixes: 3e9005546a ("kernel: modules: package Microchip LAN743x PCIe gigE driver") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* binutils: Deactivate msgpackHauke Mehrtens2023-03-091-0/+1
| | | | | | | | | | | | Deactivate the msgpack option. The binutils build might detect the libmsgpackc.so.2 library and will try to link against it, if it is not explicitly deactivated. This prevents the following build errors seen in the build bots. Package binutils is missing dependencies for the following libraries: libmsgpackc.so.2 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bmips: dts: fix warningsÁlvaro Fernández Rojas2023-03-097-2/+22
| | | | | | | | - Add missing interrupt-parent to ext_intc. - Add missing #address-cells and #size-cells to gpio_cntl. - Use proper gpio handle for gpios (ar-5315u). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: modules: add missing kmod-ptp for lan743xChuanhong Guo2023-03-091-1/+1
| | | | | Fixes: 3e9005546a ("kernel: modules: package Microchip LAN743x PCIe gigE driver") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: modules: package Microchip LAN743x PCIe gigE driverTim Harvey2023-03-081-0/+16
| | | | | | Package the Microchip LAN743x PCIe gigE driver Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* mvebu: add support for Fortinet FortiGate 50EINAGAKI Hiroshi2023-03-086-0/+588
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fortinet FortiGate 50E (FG-50E) is a UTM, based on Armada 385 (88F6820). Specification: - SoC : Marvell Armada 385 88F6820 - RAM : DDR3 2 GiB (4x Micron MT41K512M8DA-107, "D9SGQ") - Flash : SPI-NOR 128 MiB (Macronix MX66L1G45GMI-10G) - Ethernet : 7x 10/100/1000 Mbps - LAN 1-5 : Marvell 88E6176 - WAN 1, 2 : Marvell 88E1512 (2x) - LEDs/Keys : 18x/1x - UART : "CONSOLE" port (RJ-45, RS-232C level) - port : ttyS0 - settings : 9600bps 8n1 - assignment : 1:NC , 2:NC , 3:TXD, 4:GND, 5:GND, 6:RXD, 7:NC , 8:NC - note : compatible with Cisco console cable - HW Monitoring: nuvoTon NCT7802Y - Power : 12 VDC, 2 A - plug : Molex 5557-02R Flash instruction using initramfs image: 1. Power on FG-50E and interrupt to show bootmenu 2. Call "[R]: Review TFTP parameters.", check TFTP parameters and connect computer to "Image download port" in the parameters 3. Prepare TFTP server with the parameters obtained above 4. Rename OpenWrt initramfs image to "image.out" and put to TFTP directory 5. Call "[T]: Initiate TFTP firmware transfer." to download initramfs image from TFTP server 6. Type "r" key when the following message is showed, to boot initramfs image without flashing to spi-nor flash "Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?" 7. On initramfs image, backup mtd if needed minimum: - "firmware-info" - "kernel" - "rootfs" 7. On initramfs image, upload sysupgrade image to the device and perform sysupgrade 8. Wait ~200 seconds to complete flashing and rebooting. If the device is booted with stock firmware, login to bootmenu and call "[B]: Boot with backup firmware and set as default." to set the first OS image as default and boot it. Notes: - All "SPEED" LEDs(Green/Amber) of LAN and 1000M "SPEED" LEDs(Green) of WAN1/2 are connected to GPIO expander. There is no way to indicate link speed of networking device on Linux Kernel/OpenWrt, so those LEDs cannot be handled like stock firmware. On OpenWrt, use netdev(link) trigger instead. - Both colors of Bi-color LEDs on the front panel cannot be turned on at the same time. - "PWR" and "Logo" LEDs are connected to power source directly. - The following partitions are added for OpenWrt. These partitions are contained in "uboot" partition (0x0-0x1fffff) on stock firmware. - "firmware-info" - "dtb" - "u-boot-env" - "board-info" Image header for bootmenu tftp: 0x0 - 0xf : ? 0x10 - 0x2f : Image Name 0x30 - 0x17f: ? 0x180 - 0x183: Kernel Offset* 0x184 - 0x187: Kernel Length* 0x188 - 0x18b: RootFS Offset (ext2)* 0x18c - 0x18f: RootFS Length (ext2)* 0x190 - 0x193: DTB Offset 0x194 - 0x197: DTB Length 0x198 - 0x19b: Data Offset (jffs2) 0x19c - 0x19f: Data Length (jffs2) 0x1a0 - 0x1ff: ? *: required for initramfs image MAC addresses: (eth0): 70:4C:A5:xx:xx:7C (board-info, 0xd880 (hex)) WAN 1 : 70:4C:A5:xx:xx:7D WAN 2 : 70:4C:A5:xx:xx:7E LAN 1 : 70:4C:A5:xx:xx:7F LAN 2 : 70:4C:A5:xx:xx:80 LAN 3 : 70:4C:A5:xx:xx:81 LAN 4 : 70:4C:A5:xx:xx:82 LAN 5 : 70:4C:A5:xx:xx:83 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: add support for SNR-CPE-ME2-SFPAleksey Nasibulin2023-03-084-0/+236
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SNR-CPE-ME2-SFP is a wireless router with SFP cage manufactured by SNR/NAG company. Specification: - SoC: MediaTek MT7621A - CPU: 880MHz - Flash: 16 MB (GD25Q127CSIG) - RAM: 256 MB - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7615DN) - Ethernet: 4x 10/100/1000 Mbps - SFP cage (using RTL8211FS-CG) - USB 3.0 port - Power: 12 VDC, 2 A Flash instruction via TFTP: 1. Boot SNR-CPE-ME2 to recovery mode (press reset button and power on device, hold button for ~10 seconds) 2. Send firmware via TFTP client: TFTP Server address: 192.168.1.1 TFTP Client address: 192.168.1.131 3. Wait ~120 seconds to complete flashing 4. Do sysupgrade using web-interface MAC Addresses(stock) -------------------- +----------+------------------+-------------------+ | use | address | example | +----------+------------------+-------------------+ | Device | label | 6A:C4:DD:xx:xx:28 | | Ethernet | + 1 | 6A:C4:DD:xx:xx:29 | | 2g | + 2 | 6A:C4:DD:xx:xx:2A | | 5g | + 3 | 6A:C4:DD:xx:xx:2B | +----------+------------------+-------------------+ Notes: - Reading sfp eeprom is not supported [1] (driver issue). Stock image has the same situation. References: 1. https://forum.openwrt.org/t/mt7621-and-reading-sfp-eeprom/152249 Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru>
* ipq40xx: convert Netgear EX6100/EX6150 v2 to DSADavid Bauer2023-03-083-5/+19
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: Fix perf build with binutils 2.40Hauke Mehrtens2023-03-075-0/+550
| | | | | | | | | | Backport patches from kernel 6.0 which are fixing building of perf with binutils 2.40. perf with kernel 5.10 is also not building but the backporting is more complicated and only a few targets are still using kernel 5.10. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* qosify: update to the latest versionFelix Fietkau2023-03-071-3/+3
| | | | | | | | | ca4509cf84d2 bpf: switch to using bpf_skb_utils.h d064439009d0 qosify-bpf: skip unnecessary flow lookups 9c625ae96f2d map: fix deleting port based rules 9a47ea4b683d map: fix return code check for bpf_map_get_next_key calls Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mpc85xx: add support for Watchguard Firebox T10David Bauer2023-03-0712-1/+440
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Freescale P1010 RAM: 512MB FLASH: 1 MB SPI-NOR 512 MB NAND ETH: 3x Gigabite Ethernet (Atheros AR8033) SERIAL: Cisco RJ-45 (115200 8N1) RTC: Battery-Backed RTC (I2C) Installation ------------ 1. Patch U-Boot by dumping the content of the SPI-Flash using a SPI programmer. The SHA1 hash for the U-Boot password is currently unknown. A tool for patching U-Boot is available at https://github.com/blocktrron/t10-uboot-patcher/ You can also patch the unknown password yourself. The SHA1 hash is E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA 2. Interrupt the bootmenu by pressing CTRL+C. A password prompt appears. The patched password is '1234' (without quotation marks) 3. Download the OpenWrt initramfs image. Copy it to a TFTP server reachable at 10.0.1.13/24 and rename it to uImage. 4. Connect the TFTP server to ethernet port 0 of the Watchguard T10. 5. Download and boot the initramfs image by entering "tftpboot; bootm;" in U-Boot. 6. After OpenWrt booted, create a UBI volume on the old data partition. The "ubi" mtd partition should be mtd7, check this using $ cat /proc/mtd Create a UBI partition by executing $ ubiformat /dev/mtd7 -y 7. Increase the loadable kernel-size of U-Boot by executing $ fw_setenv SysAKernSize 800000 8. Transfer the OpenWrt sysupgrade image to the Watchguard T10 using scp. Install the image by using sysupgrade: $ sysupgrade -n <path-to-sysupgrade> Note: The LAN ports of the T10 are 1 & 2 while 0 is WAN. You might have to change the ethernet-port. 9. OpenWrt should now boot from the internal NAND. Enjoy. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: enable radius server supportFelix Fietkau2023-03-071-1/+1
| | | | | | This is useful in combination with the built-in eap server support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add missing return code for the bss_mgmt_enable ubus methodFelix Fietkau2023-03-071-0/+2
| | | | | | Fixes bogus errors on ubus calls Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 19:13:55 +0000