aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ncm: add error check and retry mechanism for gcom callMike Wilson2023-03-281-4/+19
| | | | | | | | | | | | This patch solves the problem of receiving "error" responses when initially calling gcom. This avoids unnecessary NO_DEVICE failures. A retry loop retries the call after an "error" response within the specified delay. A successful response will continue with the connection immediately without waiting for max specified delay, bringing the interface up sooner. Signed-off-by: Mike Wilson <mikewse@hotmail.com>
* kernel: remove unnecessary change from backlog threading fixFelix Fietkau2023-03-281-19/+9
| | | | | Fixes: f1c9bd6f6f41 ("kernel: fix kernel warning and network issue in the backlog threading patch") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix kernel warning and network issue in the backlog threading patchFelix Fietkau2023-03-281-8/+26
| | | | | | Fixes enabling it early during the boot Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: broaden filogic target descriptionDaniel Golle2023-03-272-5/+7
| | | | | | | The filogic subtarget now also supports MT7981 and will in future also support MT7988. Reflect that in the target description. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add device tree include for the MT7981 SoCDaniel Golle2023-03-271-0/+766
| | | | | | Add mt7981.dtsi so we can start adding MT7981 devices. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: fix Macronix SPI-NAND driverDaniel Golle2023-03-271-0/+35
| | | | | | | | | Use scratch buffer for DMA operetations. Passing a pointer to a stack variable won't work and results in bogus bit flips being reported. Patch was submitted upstream and is part of Linux 6.3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for SPI calibrationDaniel Golle2023-03-277-2/+590
| | | | | | | Newer MediaTek's SoCs need SPI calibration routines for SPI to work reliably. Import patches for that from MediaTek's SDK. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add PWM support for MT7981 SoCDaniel Golle2023-03-271-0/+212
| | | | | | | Add patch to support PWM on the MT7981 SoC. This patch will also be submitted to upstream Linux soon. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add I2C for MT7981 SoCDaniel Golle2023-03-271-0/+74
| | | | | | | Add patch to support I2C on the MT7981 SoC. This change will also be submitted to upstream Linux soon. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: simplify MaxLinear GPY PHY driverDaniel Golle2023-03-271-0/+166
| | | | | | | | | | | | | | | The mxl-gpy driver apparently was built in the assumption that SGMII auto-negotiation is always switched on at the MAC. This may be true for few rather recent drivers (why?), but certainly isn't for most drivers unless 'managed = "in-band-status"' is set in device tree. Add patch to the mediatek target which reduces mxl-gpy to behave more like an ordinary PHY driver using out-of-band status. This allows to use these PHYs without rate-adaptation which seems to be at least partially broken/racy in some revisions of the PHY and/or internal PHY firmware. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: dsa: make use of pcs-mtk-lynxi also for mt7530Daniel Golle2023-03-271-0/+514
| | | | | | | | The MT7531 switch IC comes with SerDes ports with PCS identical to what is also used in MediaTek's SoCs. Make use of the shared driver to ease maintainance and reduce code duplication. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: backport regmap reg_base and downshift featuresDaniel Golle2023-03-274-1/+243
| | | | | | | Backport new regmap features from Linux 5.18 which are needed to let mt7530 use pcs-mtk-lynxi. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: mtk_eth_soc: switch to external PCS driverDaniel Golle2023-03-278-25/+537
| | | | | | Backport patch to make use of the new PCS driver in mtk_eth_soc. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: pcs-mtk-lynxi: add hack to use 2500Base-X without ANDaniel Golle2023-03-271-0/+40
| | | | | | | | | | Using 2500Base-T SFP modules e.g. on the BananaPi R3 requires manually disabling auto-negotiation, e.g. using ethtool. While a proper fix using SFP quirks is being discussed upstream, bring a work-around to restore user experience to what it was before the switch to the dedicated SGMII PCS driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: net: pcs: add driver for MediaTek SGMII PCSDaniel Golle2023-03-2710-13/+407
| | | | | | Backport dedicated PCS driver for MediaTek LynxI SGMII/SerDes unit. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: mtk_eth_soc: allow setting MDIO clock frequencyDaniel Golle2023-03-278-23/+99
| | | | | | | | Backport patch allowing to set the MDIO bus clock frequency. By default the MDIO bus clock runs on 2.5 MHz, allow increasing it up to 25 MHz. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for built-in GE PHYs of newer SoCsDaniel Golle2023-03-274-0/+1446
| | | | | | | | | | | MT7981 and the upcoming MT7988 have built-in Gigabit Ethernet PHYs. While they share some design properties with the PHYs present in MT753x, they do need calibration data from the SoC's efuse. Add driver to support them. Upstreaming it is planned, but there are still some ongoing discussions with MediaTek. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: backport support for MT7981 EthernetDaniel Golle2023-03-272-1/+184
| | | | | | Backport support for the MT7981 SoC to mtk_eth_soc. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: backport pinctrl driver for MT7981 SoCDaniel Golle2023-03-274-0/+1021
| | | | | | | Backport the pinctrl driver for the MT7981 SoC. The driver has also been submitted upstream and is part of Linux 6.3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: backport clk driver for MT7981 SoCDaniel Golle2023-03-2710-0/+1185
| | | | | | | Backport driver for common clocks in MT7981 SoC. The driver has also been submitted upstream and became part of Linux 6.3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: replace mtk_sgmii patches with versions accepted upstreamDaniel Golle2023-03-2721-223/+875
| | | | | | | | | Replace patches for MediaTek Ethernet driver SGMII/SerDes unit with their corresponding upstream patches. Not all of the patches in our tree went upstream as-is, some are slightly different implementations, and they require the phylink_pcs helpers now made available. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: backport some phylink helper functionsDaniel Golle2023-03-272-1/+151
| | | | | | | | | | | | | | It isn't feasible to literally backport all upstream phylink_pcs changes down to Linux 5.15: It's just too many patches, and many downstream drivers and hacks are likely to break. We are too close to branching off to risk this, and it's also just too much work. Instead just add helper functions used by modern PCS drivers while keeping the original functions instact as well. While this may add a kilobyte or two of extra kernel size, it has the advantage that we get the best of both worlds: None of the existing codepaths are touched, but yet we have the option to backport singular improvements to Ethernet drivers where needed. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq-wifi: bump to latest git HEADChristian Marangi2023-03-271-3/+3
| | | | | | | | ccd7e46 ipq40xx: add support for Wallystech DR40x9 2ce60e1 Revert "ipq40xx: add support for Wallystech DR40x9" ea962ca ipq40xx: add Emplus WAP551 BDF Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: refresh kernel patchesChristian Marangi2023-03-2730-553/+261
| | | | | | | Refresh kernel patches for generic kernel 5.15 due to new backport version of MGLRU patchset. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: Update MGLRU patchsetKazuki H2023-03-2737-4805/+9996
| | | | | | | | The current patches are old, update them from mainline. Backports taken from https://github.com/yuzhaogoogle/linux/commits/mglru-5.15 Tested-by: Kazuki H <kazukih0205@gmail.com> #mt7622/Linksys E8450 UBI Signed-off-by: Kazuki H <kazukih0205@gmail.com>
* ramips: add support for Keenetic Lite III rev. AAlexey Bartenev2023-03-275-1/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | General specification: SoC Type: MediaTek MT7620N (580MHz) ROM: 8 MB SPI-NOR (W25Q64FV) RAM: 64 MB DDR (EM6AB160TSD-5G) Switch: MediaTek MT7530 Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4) Wireless: 2.4 GHz (MediaTek RT5390): b/g/n Buttons: 3 button (POWER, RESET, WPS) Slide switch: 4 position (BASE, ADAPTER, BOOSTER, ACCESS POINT) Bootloader: U-Boot 1.1.3 Power: 9 VDC, 0.6 A MAC in stock: |- + | | LAN | RF-EEPROM + 0x04 | | WLAN | RF-EEPROM + 0x04 | | WAN | RF-EEPROM + 0x28 | OEM easy installation 1. Use a PC to browse to http://my.keenetic.net. 2. Go to the System section and open the Files tab. 3. Under the Files tab, there will be a list of system files. Click on the Firmware file. 4. When a modal window appears, click on the Choose File button and upload the firmware image. 5. Wait for the router to flash and reboot. OEM installation using the TFTP method 1. Download the latest firmware image and rename it to klite3_recovery.bin. 2. Set up a Tftp server on a PC (e.g. Tftpd32) and place the firmware image to the root directory of the server. 3. Power off the router and use a twisted pair cable to connect the PC to any of the router's LAN ports. 4. Configure the network adapter of the PC to use IP address 192.168.1.2 and subnet mask 255.255.255.0. 5. Power up the router while holding the reset button pressed. 6. Wait approximately for 5 seconds and then release the reset button. 7. The router should download the firmware via TFTP and complete flashing in a few minutes. After flashing is complete, use the PC to browse to http://192.168.1.1 or ssh to proceed with the configuration. Signed-off-by: Alexey Bartenev <41exey@proton.me>
* bcm47xx: enable adm6996 only on legacy subtargetAleksander Jan Bajkowski2023-03-274-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The generic subtarget supports only a few devices. None of these devices are equipped with a ADM6996 switch. On the mips74k subtarget, the driver for the adm6996 switch is disabled. So it seems that the ADM6996 driver should be enabled only on the legacy subtarget. Support for ADM6996 switches was enabled in commit 68081fc1c8c7814b1c064431eb2e364f9226801a. At the time when this driver was enabled the bcm47xx target had only one subtarget. Switches used by individual devices suported by the generic subtarget are listed below. Device Switch Edimax PS-1208MFG int. SoC Linksys WRT300N v1.1 Broadcom BCM5325 Linksys WRT310N v1 Broadcom BCM5397 Linksys WRT350N v1 Broadcom BCM5397 Linksys WRT610N v1 Broadcom BCM53115 Linksys WRT610N v2 Broadcom BCM53115 Linksys E3000 v1 Broadcom BCM53115 Reduce uncompressed kernel size by 8320 Bytes. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* bcm47xx: refresh configAleksander Jan Bajkowski2023-03-272-10/+6
| | | | | | | This was done by executing these command: $ make kernel_oldconfig CONFIG_TARGET=subtarget Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* rules.mk: add FILECMD variableMichael Pratt2023-03-271-0/+1
| | | | | | | | | | | | Some packages using Libtool have the possibility of using this environment variable if set, instead of the direct command for "file" using PATH, or the need to patch a hard-coded path. This is a new feature of Libtool 2.4.7 Ref: bf261073d ("tools/libtool: bump to 2.4.7") Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/libtool: clean up build recipesMichael Pratt2023-03-271-6/+3
| | | | | | | | | Host/Clean/Default is no longer defined. Use the uninstall makefile target to remove the obsolete m4 files, and more. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* autotools: remove specialized version of libtoolMichael Pratt2023-03-272-15/+0
| | | | | | | | | | | | | Remove the specialized copy of libtool which was used for linking to uClibc++, which is now removed. Also remove references to the deprecated fixup targets that invoked this specialized libtool, which no package uses. Ref: 6b2ed6101 ("uclibc++: remove") Ref: c10515db6 ("re-enable the libtool PKG_BUILD_DEPENDS for PKG_FIXUP") Ref: 246a5b334 ("More libtool madness") Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/automake: verbose variable compatibilityMichael Pratt2023-03-271-0/+59
| | | | | | | | | | | | | | | An old patch attempted to harmonize the way that both Openwrt and Automake uses the $(V) variable. However, it was reverted because of the side-effects. This method is more simple and just allows Automake to accept any string as part of the verbosity toggle, falling back to the default if null. Ref: e6901bf90 ("tools/automake: Revert "Do not use $(V) - force AM_V=1"") Ref: 43365ca66 ("Do not use $(V) - force AM_V=1") Signed-off-by: Michael Pratt <mcpratt@pm.me>
* lantiq: xway: add support for AVM FRITZ!Box 7330Aleksander Jan Bajkowski2023-03-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The AVM FRITZ!Box 7330 shares hardware with the AVM Fritzbox 7320 except for the second ethernet port, which only supports 100M. Hardware: - SoC: Lantiq ARX 188 - CPU: 2x MIPS 34Kc 393 MHz - RAM: 64 MiB 196 MHz - Flash: 16 MiB NAND - Ethernet: Built-in Gigabit Ethernet switch, 1x 1GbE, 1x 100M - Wifi: Atheros AR9227-BC2A b/g/n with 2 pcb/internal antennas - USB: 2x USB 2.0 - DSL: Built-in ADSL2+ modem - DECT: Dialog SC14441 - LEDs: 1 two-color, 4 one-color - Buttons: 1x DECT, 1x WIFI - Telephone connectors: 1 FXS port via TAE or RJ11 connector Installation: The installation process is described on the wiki. Unsupported (same as AVM 7320): - VoIP (DECT and FXS), - Second Ethernet port. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* ath79: Add Aruba AP-175 supportMartin Kennedy2023-03-274-10/+266
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is very similar to the Aruba AP-105, but is outdoor-first. It is very similar to the MSR2000 (though certain MSR2000 models have a different PHY[^1]). A U-Boot replacement is required to install OpenWrt on these devices[^2]. Specifications -------------- * Device: Aruba AP-175 * SoC: Atheros AR7161 680 MHz MIPS * RAM: 128MB - 2x Mira P3S12D40ETP * Flash: 16MB MXIC MX25L12845EMI-10G (SPI-NOR) * WiFi: 2 x DNMA-H92 Atheros AR9220-AC1A 802.11abgn * ETH: IC+ IP1001 Gigabit + PoE PHY * LED: 2x int., plus 12 ext. on TCA6416 GPIO expander * Console: CP210X linking USB-A Port to CPU console @ 115200 * RTC: DS1374C, with internal battery * Temp: LM75 temperature sensor Factory installation: - Needs a u-boot replacement. The process is almost identical to that of the AP105, except that the case is easier to open, and that you need to compile u-boot from a slightly different branch: https://github.com/Hurricos/u-boot-ap105/tree/ap175 The instructions for performing an in-circuit reflash with an SPI-Flasher like a CH314A can be found on the OpenWrt Wiki (https://openwrt.org/toh/aruba/ap-105); in addition a detailed guide may be found on YouTube[^3]. - Once u-boot has been replaced, a USB-A-to-A cable may be used to connect your PC to the CP210X inside the AP at 115200 baud; at this point, the normal u-boot serial flashing procedure will work (set up networking; tftpboot and boot an OpenWrt initramfs; sysupgrade to OpenWrt proper.) - There is no built-in functionality to revert back to stock firmware, because the AP-175 has been declared by the vendor[^4] end-of-life as of 31 Jul 2020. If for some reason you wish to return to stock firmware, take a backup of the 16MiB flash before flashing u-boot. [^1]: https://github.com/shalzz/aruba-ap-310/blob/master/platform/bootloader/apboot-11n/include/configs/msr2k.h#L186 [^2]: https://github.com/Hurricos/u-boot-ap105/tree/ap175 [^3]: https://www.youtube.com/watch?v=Vof__dPiprs [^4]: https://www.arubanetworks.com/support-services/end-of-life/#product=access-points&version=0 Signed-off-by: Martin Kennedy <hurricos@gmail.com>
* ramips: mt7621: enable unused PCIe port to fix potential boot failureShiji Yang2023-03-264-16/+0
| | | | | | | | | | | | | One user reported that his SIMAX1800T couldn't boot like the others. After debugging, I found that this was caused by the disabled PCIe port. I cannot reproduce this issue on my SIMAX1800T. But when I disabled pcie2 on the ASUS RT-AC57U, I got the same result. It seems that disabling these unused PCIe ports on some mt7621 revisions will cause PCIe to fail to initialize. So we'd better to re-enable them on all related mt7621 devices. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: fix 5g mac for TOTOLINK X5000RChuanhong Guo2023-03-261-0/+4
| | | | | | | | | There's no valid mac address for the second band in the eeprom. The vendor fw uses 2.4G mac + 4 as the mac for 5G radio. Do the same in our firmware. Fixes: 23be410b3d ("ramips: add support for TOTOLINK X5000R") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mac80211: fix receiving mesh packets in forwarding=0 networksFelix Fietkau2023-03-261-0/+50
| | | | | | | | When forwarding is set to 0, frames are typically sent with ttl=1. Move the ttl decrement check below the check for local receive in order to fix packet drops. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath79: calibrate dlink dir-825 b1 with nvmemEdward Chow2023-03-263-5/+31
| | | | | | | | | | | | | | | | | Driver for both soc (2.4GHz Wifi) and pci (5 GHz) now pull the calibration data from the nvmem subsystem. This allows us to move the userspace caldata extraction for the pci-e ath9k supported wifi into the device-tree definition of the device. Currently, only ethernet devices uses the mac address of "mac-address-ascii" cells, while PCI ath9k devices uses the mac address within calibration data. Signed-off-by: Edward Chow <equu@openmail.cc> (restored switch configuration in 02_network, integrated caldata into partition) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* lantiq: xrx200: convert FritzBox 7360v2's wifi to nvmemChristian Lamparter2023-03-263-11/+18
| | | | | | | | | | | | | | | | this was thoroughly tested (warm and cold boots). on a real 7360v2. This is because there have been documented hick-ups with other lantiq devices that need the owl-loader too. It's likely that the 7360(sl) could be converted in the same way as well. However the 7362sl uses a reversed caldata format, so the "qca,no-eeprom" stays in place. The patch also moves the urloader nvmem partition definition into the partition section. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: Migrate to libdeflateChristian Lamparter2023-03-262-7/+7
| | | | | | | | | | libdeflate's gzip compressor provides a better compression ratio and uboot's decompressor has no problem with the data streams. Tested on MX60, WNDR4700, WNDAP660 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: Fix Linksys upgrade, restore config stepJeff Kletsky2023-03-261-1/+6
| | | | | | | | | | | | | | | | | | | | It appears that the refactor of the upgrade process for NAND devices resulted in the nand_do_upgrade_success step not being called for devices using the linksys.sh script. As a result, configuration was not preserved over sysupgrade steps. This was restored for some devices in commit 84ff6c90dda1 ("base-files: bring back nand_do_upgrade_success"). This restored preservation of config for ipq40xx devices using the linksys.sh script. Other devices and targets have not been examined. Closes: #11677 Fixes: e25e6d8e54 ("base-files: fix and clean up nand sysupgrade code") Tested-on: EA8300 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> (checkpatch nitpick) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* util-linux: add rev utility packageOskari Rauta2023-03-251-1/+18
| | | | | | | | | | | | I found use for this in my scripts; I noticed that it is already compiled with util-linux - there just isn't package for it - let's package it then. Description: The rev utility copies the specified files to the standard output, reversing the order of characters in everyline. Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
* kernel: bump 5.10 to 5.10.176John Audia2023-03-2518-35/+35
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.104John Audia2023-03-2510-20/+20
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.103John Audia2023-03-25120-1393/+721
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: backport-5.15/704-15-v5.19-net-mtk_eth_soc-move-MAC_MCR-setting-to-mac_finish.patch Removed upstreamed: backport-5.15/060-v6.0-01-tools-build-Add-feature-test-for-init_disassemble_in.patch[1] backport-5.15/060-v6.0-02-tools-include-add-dis-asm-compat.h-to-handle-version.patch[2] backport-5.15/060-v6.0-03-tools-perf-Fix-compilation-error-with-new-binutils.patch[3] backport-5.15/060-v6.0-04-tools-bpf_jit_disasm-Fix-compilation-error-with-new-.patch[4] backport-5.15/060-v6.0-05-tools-bpftool-Fix-compilation-error-with-new-binutil.patch[5] pending-5.15/733-02-net-ethernet-mtk_eth_soc-fix-RX-data-corruption-issu.patch[6] bcm47xx/patches-5.15/170-bgmac-fix-initial-chip-reset-to-support-BCM5358.patch[7] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=51b99dc38c1a053e2e732d7f9e2740e343ae7eae 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=451c9d7b16169645ed291ebb2ca9844caa088f2d 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=97f005c0bdbaf656a7808586d234965385a06c58 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=1c27fab243333821375e4d63128d60093fdbe149 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=4441a90091931fd81607567961dc122f24f735bb 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=2adc29350a5b4669544566f71f208d2abaec60ab 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=04bfc5bcdfc0fdb73587487c71b04d63807ae15a Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: fix mtk flow offload list corruption issue with l2 flowsFelix Fietkau2023-03-254-31/+48
| | | | | | | The same node was accidentally used for two different lists, causing an invalid pointer chain. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: refresh mxl-gpy LED patchÁlvaro Fernández Rojas2023-03-251-6/+1
| | | | | | | Make the patches apply cleanly again. Fixes: 90691f450543 ("generic: mxl-gpy: allow configuring LED registers") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: backport dsa b53 patchesÁlvaro Fernández Rojas2023-03-254-244/+95
| | | | | | These patches have been merged upstream, so let's move them to backport. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: sercomm,h500-s: fix upgradeÁlvaro Fernández Rojas2023-03-251-3/+1
| | | | | | | | Sercomm H500-s devices don't need the JFFS2 cleanmarkers as opposed to the other bmips NAND devices. Fixes: 6df12200d903 ("bmips: add support for Sercomm H-500s") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* filogic: add support for ASUS TUF-AX4200David Bauer2023-03-247-0/+368
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SOC: MediaTek MT7986 RAM: 512MB DDR3 FLASH: 256MB SPI-NAND (Winbond W25N02KV) WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz ETH: MediaTek MT7531 Switch MaxLinear GPY211C 2.5 N-Base-T PHY UART: 3V3 115200 8N1 (Pinout silkscreened / Do not ocnnect VCC) Installation ------------ 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server reachable at 192.168.1.66/24. Rename the image to tufax4200.bin. 2. Connect the TFTP server to the AX4200. Conect to the serial console, interrupt the autoboot process by pressing '4' when prompted. 3. Download & Boot the OpenWrt initramfs image. $ setenv ipaddr 192.168.1.1 $ setenv serverip 192.168.1.66 $ tftpboot 0x46000000 tufax4200.bin $ bootm 0x46000000 4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Missing features ---------------- - The LAN port LEDs are driven by the switch but OpenWrt does not correctly configure the output. Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-25 02:28:48 +0000