aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* tools/b43-tools: update to latest git HEADLinhui Liu2023-01-141-7/+4
| | | | | | 2fe10ea b43-fwdump: Fix forwarding of arguments to disassembler Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* realtek: Follow kernel comment style recommendationMarkus Stockhausen2023-01-131-21/+27
| | | | | | | While Linus is fine with longer code lines, comments should still be within the 80 char limit. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
* realtek: add support for Netgear GS750EDavide Fioravanti2023-01-133-0/+524
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an RTL8393-based switch with 48 RJ-45 and 2 SFP ports. Hardware -------- SoC: Realtek RTL8393M RAM: 128MB DDR3 (Nanya NT5CC64M16GP-DI) FLASH: 8MB NOR (Macronix MX25L6433F) ETH: 48x 10/100/1000 Mbps RJ-45 Ethernet SFP: 2x SFP BTN: - 1x Reset button LEDS: - 50x Green-Amber leds: lan/sfp status - 1x Green led: power (Always on) UART: - 115200-8-N-1 (CN3, pin-out on PCB) Everything works correctly except for the 2 SFP ports that are not working unless you enable it every boot in U-Boot with the command: rtk network on Installation ------------ You can install Openwrt using one of the following methods. Warning: flashing OpenWrt will delete your current configuration. Warning 2: if the -factory.bix file is not available anymore, you must follow Method 2. Method 1: Check the firmware version currently running on your switch. If you are running FW V1.0.1.10 or greater, you have to download the firmware V1.0.1.8 from Netgear website and then flash this version. When the switch restarts, it should be on version V1.0.1.8. Now you can get the OpenWrt -factory.bix file and then flash it using the OEM web interface. Method 2 (requires the UART connection): Boot the -initramfs-kernel.bin image from U-Boot with these commands: rtk network on; tftpboot 0x8f000000 openwrt-realtek-rtl839x-netgear_gs750e-initramfs-kernel.bin; bootm; And then flash the -sysupgrade.bin file from OpenWrt. Revert to stock --------------- Get the stock firmware from the Netgear website and flash it using the OpenWrt web interface. Remember to not keep the current configuration and check the "Force upgrade" checkbox Once reverted to stock the firmware could complain in the UART console about mtdblock3 and/or mtdblock4 not being mounted correctly but it seems to work anyway without any problems. Sample error: mount: Mounting /dev/mtdblock4 on /mntlog failed: Input/output error If you want to get rid of these error messages you can boot the -initramfs-kernel.bin image from U-Boot with these commands: rtk network on; tftpboot 0x8f000000 openwrt-realtek-rtl839x-netgear_gs750e-initramfs-kernel.bin; bootm; And then erase the corresponding partitions using the command: For mtdblock3: mtd erase jffs2_cfg For mtdblock4: mtd erase jffs2_log Now you can reboot the switch and the errors should be gone Note ---- To get the SFP ports fully working, all the right GPIOs must be found. In the GPL sources I found these: - GPIO_14: SFP_TX_DIS1; - GPIO_19: SFP_TX_DIS0; Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* realtek: rtl839x: enable driver for virtual mtd_concat devices in configDavide Fioravanti2023-01-132-0/+2
| | | | | | | Enable the driver for the rtl839x target. It's required at least for Netgear GS750E Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* image: add FACTORY_SIZE to DEFAULT_DEVICE_VARSSander Vanheule2023-01-131-1/+1
| | | | | | | | | | | | | FACTORY_SIZE is used as a device recipe variable on both the D-Link DIR-825-B1 and Trendnet TEW-673GRU, but is not listed as a device variable, neither globally, nor for ath79. Being assigned the same value, this probably hasn't caused any issues. Add FACTORY_SIZE to the global list DEFAULT_DEVICE_VARS, to ensure the variable is reset for every device, and to allow it to be used outside of the ath79 target. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* tools/xz: update to 5.4.1Linhui Liu2023-01-131-2/+2
| | | | | | | Release notes: https://git.tukaani.org/?p=xz.git;a=blob;f=NEWS;hb=HEAD Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* tools/patchelf: update to 0.17.2Linhui Liu2023-01-131-2/+2
| | | | | | | | | | | | Changes from version 0.17.1 to version 0.17.2: - fix incorrect version in 0.17.1 Changes from version 0.17.0 to version 0.17.1: - Also pass STRIP to the tests - Fix Out-of-bounds read in the function modifySoname - Split segment size fix Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* tools/llvm: update to 15.0.7Linhui Liu2023-01-131-2/+2
| | | | | | | Release Notes: https://discourse.llvm.org/t/llvm-15-0-7-release/67638 Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* kernel: bump 5.15 to 5.15.87John Audia2023-01-1319-89/+45
| | | | | | | | | | | | | Removed upstreamed: generic/hack-5.15/290-net-dsa-mv88e6xxx-depend-on-PTP-conditionally.patch[1] Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.87&id=945e58bdaf6faf6e3f957d182244fa830acddab4 Signed-off-by: John Audia <therealgraysky@proton.me>
* trace-cmd: update to v3.1.6Nick Hainke2023-01-131-2/+2
| | | | | | Update to latest release. Signed-off-by: Nick Hainke <vincent@systemli.org>
* libtracefs: update to 1.6.4Nick Hainke2023-01-131-2/+2
| | | | | | Update to latest release. Signed-off-by: Nick Hainke <vincent@systemli.org>
* libtraceevent: update to 1.7.1Nick Hainke2023-01-131-2/+2
| | | | | | Update to latest release. Signed-off-by: Nick Hainke <vincent@systemli.org>
* archs38: enable 5.15 testing kernelNick Hainke2023-01-132-45/+26
| | | | | | | Add 5.15 as testing kernel. Tested-by: Evgeniy Didin <didin@synopsys.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
* archs38: 5.15: copy config from 5.10Nick Hainke2023-01-131-0/+277
| | | | | | Copy config from 5.10 to 5.15. Signed-off-by: Nick Hainke <vincent@systemli.org>
* uboot-mediatek: update to U-Boot 2023.01Daniel Golle2023-01-1370-12398/+118
| | | | | | | | Support for MT7981 and MT7986 has been merged, remove patches. Tested on a couple of MT7986, MT7622 and MT7623 boards. MIPS builds are untested. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: update to 2023.01Linhui Liu2023-01-131-3/+3
| | | | | | Update to latest version. Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* tools/mkimage: update to 2023.01Linhui Liu2023-01-135-1616/+4
| | | | | | | | | Remove upstreamed patches: - 020-tools-mtk_image-split-gfh-header-verification-into-a.patch - 021-tools-mtk_image-split-the-code-of-generating-NAND-he.patch - 022-tools-mtk_image-add-support-for-nand-headers-used-by.patch Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* mac80211: ath11k: fix monitor bringupRobert Marko2023-01-122-0/+240
| | | | | | | | | | Currently, ath11k will crash the crash if we try to bringup the monitor mode interface. Luckily, it has already been fixed upstream, so backport the patches fixing it. Fixes: 93ae4353cdf6 ("mac80211: add ath11k PCI support") Signed-off-by: Robert Marko <robimarko@gmail.com>
* scripts/dl_github_archieve.py: fix generating unreproducible tarChristian Marangi2023-01-121-1/+1
| | | | | | | | | | | | | | | Allign dl_github_archieve.py to 8252511dc0b5a71e9e64b96f233a27ad73e28b7f change. On supported system the sigid bit is applied to files and tar archieve that on tar creation. This cause unreproducible tar for these system and these bit should be dropped to produce reproducible tar. Add the missing option following the command options used in other scripts. Fixes: 75ab064d2b38 ("build: download code from github using archive API") Suggested-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Tested-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* lldpd: use release tar instead of codeloadChristian Marangi2023-01-121-2/+2
| | | | | | | | | | | | | | | | | | | There is currently a problem with making reproducible version of lldpd. The tool version is generated based on 3 source: 1. .dist-version file in release tar 2. git hash with presence of .git directory 3. current date Using the codeload tar from github results in getting the repo without the .git directory and since they are not release tar, we don't have .dist-version. This results in having lldpd bin with a version set to the current build time. Switch to release tar so that we correctly have a .dist-version file and the version is not based on the build time. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* CI: remove pcre from macOSRosen Penev2023-01-111-2/+1
| | | | | | | ff02e1561f2073b39814f2d73205a5209471b115 added a host version of pcre for packages that need it. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* CI: remove already installed packagesRosen Penev2023-01-111-11/+1
| | | | | | The GitHub image already includes these. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* CI: remove various tools from macOSRosen Penev2023-01-111-7/+1
| | | | | | | | | zstd, openssl, and quilt are already built in tools/. No need to install them. The rest are unused. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ksmbd: Fix ZDI-CAN-18259Hauke Mehrtens2023-01-113-1/+100
| | | | | | | | | | | This fixes a security problem in ksmbd. It currently has the ZDI-CAN-18259 ID assigned, but no CVE yet. Backported from: https://github.com/cifsd-team/ksmbd/commit/8824b7af409f51f1316e92e9887c2fd48c0b26d6 https://github.com/cifsd-team/ksmbd/commit/cc4f3b5a6ab4693aba94a45cc073188df4d67175 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: xrx200: Fix wifi LED on o2 box 6431Florian Maurer2023-01-112-1/+1
| | | | | | | Wifi LED did not work using phy0radio, which somehow slipped through in the previous testing Signed-off-by: Florian Maurer <f.maurer@outlook.de>
* mvebu: backport upstream patch to fix COMPHY resetMichal Hrusecky2023-01-111-0/+50
| | | | | | | | | | | | | | | | | | | | Upstream commit [1] included in the Linux kernel version 6.2 was backported to Linux kernels 6.1.4, 6.0.18. It should be possible that it is going to be backported even to the 5.15 series, but before it happens, let's include it here. It was discovered that on SOC Marvell Armada 3720, which is using e.g. Turris MOX, and if you are also using it with older ARM Trusted Firmware v1.5, it is not possible to detect connected USB 3.0 devices, but they are working just fine when connected with USB 2.0 cable. This patch fixes it. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/phy/marvell/phy-mvebu-a3700-comphy.c?id=b01d622d76134e9401970ffd3fbbb9a7051f976a Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com> Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> [improve commit description, added tag to the patch]
* CI: kernel: test each target with additional changes than target/linuxChristian Marangi2023-01-111-12/+10
| | | | | | | | | | | | Test each target if there are additional changes than target/linux. This is needed to do wide test with changes to kmods, include/kernel and changes to the workflow files. While at it also cleanup and rework the code to drop duplication. Also drop since_last_remote_commit to better track changes. Fixes: 04ada8bc4118 ("CI: kernel: build only changed targets") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* at91: sam9x,sama5: fix racy SD card image generationPetr Štetiar2023-01-112-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | We've few low spec (make -j3) build workers attached to the 22.03 buildbot instance which from time to time exhibit following build failure during image generation (shortened for brewity): + dd bs=512 if=root.ext4 of=openwrt-22.03...sdcard.img.gz.img dd: failed to open 'root.ext4': No such file or directory Thats happening likely due to the fact, that on buildbots we've `TARGET_PER_DEVICE_ROOTFS=y` which produces differently named filesystem image in the SD card image target dependency chain: make_ext4fs -L rootfs ... root.ext4+pkg=68b329da and that hardcoded `root.ext4` image filename becomes available from other Make targets in the later stages. So lets fix this issue by using IMAGE_ROOTFS Make variable which should contain proper path to the root filesystem image. Fixing remaining subtargets ommited in commit 5c3679e39b61 ("at91: sama7: fix racy SD card image generation"). Fixes: 5c3679e39b61 ("at91: sama7: fix racy SD card image generation") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86: Add APU6 board support for startup detectionPhilip Prindeville2023-01-112-1/+7
| | | | | | | The APU6 is similar to the APU4 except for eth0 having an SFP cage instead of RJ45. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* x86: Add definitions for APU6 platformPhilip Prindeville2023-01-111-0/+280
| | | | | | | The board is similar to an APU4 except it has an SFP cage for eth0. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> [patch refresh]
* at91: sama7: fix racy SD card image generationPetr Štetiar2023-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | We've few low spec (make -j3) build workers attached to the 22.03 buildbot instance which from time to time exhibit following build failure during image generation: + dd bs=512 if=root.ext4 of=openwrt-22.03-snapshot-r20028-43d71ad93e-at91-sama7-microchip_sama7g5-ek-ext4-sdcard.img.gz.img seek=135168 conv=notrunc dd: failed to open 'root.ext4': No such file or directory Thats likely due to the fact, that on buildbots we've `TARGET_PER_DEVICE_ROOTFS=y` which produces differently named filesystem image in the SD card image target dependency chain: make_ext4fs -L rootfs ... root.ext4+pkg=68b329da and that hardcoded root.ext4 becomes available from other target in the later stages. So lets fix this issue by using IMAGE_ROOTFS Make variable which should contain proper path to the root filesystem image. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* CI: add concurrency limits for pr testChristian Marangi2023-01-114-0/+16
| | | | | | | | | | | Add concurrency limits for pull request test so that on pull request refresh old jobs are cancelled. The group is created based on the github ref + workflow name and the workflow is cancelled only it it comes from a pull_request event. Push events are not affected by this limit. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* Revert "TODROP: test for ipq4019 target"Christian Marangi2023-01-111-1/+1
| | | | | | | | This reverts commit 4eb587f7e0a49b9c404857b18571f45981b3a7fc. Pushed by mistake while merging a pr using script. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* TODROP: test for ipq4019 targetChristian Marangi2023-01-111-1/+1
| | | | | | COMMIT TO DROP Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: kernel: build only changed targetsChristian Marangi2023-01-111-13/+46
| | | | | | | | | | Detect changes in commit and build only changed targets. If a change is related to the generic target, build test each target. The matrix json is split. For target check patch only the first subtarget is selected, for build test each target subtarget is built. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: build: fallback to compile toolchain if external toolchain failChristian Marangi2023-01-111-3/+5
| | | | | | | | | | If for whatever reason external toolchain can't be found or downloaded, fallback to internal toolchain build. This can be useful when new target are introduced and external toolchain are not present in openwrt fileserver. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: refresh upstreamed patch with kernel version tagChristian Marangi2023-01-1022-497/+782
| | | | | | | | | Refresh upstreamed patch with kernel version tag and replace them with the upstream version. For krait-cc patch rework them with the upstream changes. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* prereq-build: limit argp/fts/obstack/libintl.h to Linux OSChristian Marangi2023-01-101-4/+6
| | | | | | | | BSD based OS have different fixup and doesn't require these header. Limit these Header to Linux based OS. Fixes: 36bc306ae611 ("prereq-build: add extra check for elfutils required header") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* iwinfo: update to latest Git HEADChristian Marangi2023-01-101-3/+3
| | | | | | | c7b420a devices: add Qualcomm Atheros QCN6024/9024/9074 cards 5914d71 iwinfo: devices: add Qualcomm Atheros IPQ8074 WiSoC Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* treewide: derive host and hostpkg path from STAGING_DIRChristian Marangi2023-01-094-12/+12
| | | | | | | | | | | | | | | | | | | | | STAGING_DIR may be provided from command line. We currently hardcoded STAGING_DIR_HOST and STAGING_DIR_HOSTPKG to the default location but we currently have some relocatable patch that derive the path from STAGING_DIR. Fix this and correctly derive STAGING_DIR_HOST and STAGING_DIR_HOSTPKG from STAGING_DIR. The intention is to fix inconsistency from the relocatable patch and the use of STAGING_DIR_HOST that is always hardcoded. This with a wrong configuration may end up in broken state with some host tools expecing a PATH from STAGING_DIR and others using library from the default staging_dir/host path. To save downstream project the original implementation is saved while fixing the inconsistency between patch and .mk. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* toolchain/gdb: use STAGING_DIR_HOST instead of hardcoding defaultChristian Marangi2023-01-091-4/+4
| | | | | | | Use STAGING_DIR_HOST to reference staging host directory instead of hardcoding it to default path. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* toolchain/gcc: use STAGING_DIR_HOST instead of hardcoding defaultChristian Marangi2023-01-092-5/+5
| | | | | | | Use STAGING_DIR_HOST to reference staging host directory instead of hardcoding it to default path. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* tools/mpc: use STAGING_DIR_HOST instead of hardcoding defaultChristian Marangi2023-01-091-2/+2
| | | | | | | Use STAGING_DIR_HOST to reference the staging dir for host tools instead of hardcoding it to the default location. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* libtool: use STAGING_DIR_HOST in relocatable patchChristian Marangi2023-01-091-25/+25
| | | | | | | | Instead of using STAGING_DIR and then go up one dir with '../' use directly STAGING_DIR_HOST env variable. This should produce cleaner symbolic links. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* autoconf: use STAGING_DIR_HOST in relocatable patchChristian Marangi2023-01-091-20/+20
| | | | | | | | Instead of using STAGING_DIR and then go up one dir with '../' use directly STAGING_DIR_HOST env variable. This should produce cleaner symbolic links. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* automake: use STAGING_DIR_HOST in relocatable patchChristian Marangi2023-01-092-6/+6
| | | | | | | | Instead of using STAGING_DIR and then go up one dir with '../' use directly STAGING_DIR_HOST env variable. This should produce cleaner symbolic links. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* toolchain/gcc: fix broken gcc version selectionChristian Marangi2023-01-091-1/+1
| | | | | | | | | | | | | | | Config evaluation require default with if to be put before the generic default config with no condition. Putting the default config before any conditional default results in always selecting the non conditional one. This results in the version be hardcoded to gcc 12 even if gcc 11 is selected in the Advanced build options. Fix this by putting the gcc 12 default option as last after ANY conditional default config. Fixes: d9de5252a44e ("toolchain/gcc: switch to version 12 by default") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* prereq-build: add extra check for elfutils required headerChristian Marangi2023-01-091-0/+12
| | | | | | | | | | While testing tools build on an alpine image it was found that with musl libc some header are missing for elfutils tool. Add extra prereq-build check to make sure these header are present in the system to correctly compile host tools. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* prereq-build: use RequireCHeader test for ncurses prereqChristian Marangi2023-01-091-3/+2
| | | | | | | RequireCHeader is a generilized version of the ncurses prereq test. Use that indetad. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* include/prereq.mk: add RequireCHeader helperChristian Marangi2023-01-091-0/+12
| | | | | | | | | | | | Add RequireCHeader helper that will try to compile a fake c program with the requested header included. This is useful to check if a specific header is present in the system without checking for the specific path. This is a generilized version of the current ncurses test. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-14 02:23:32 +0000