aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* realtek: 5.15: Improve error handling in rtl838x_pie_rule_write()Pascal Ernster2023-01-051-6/+10
| | | | | | | In target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c, make rtl838x_pie_rule_write() return non-zero value case of error. Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: 5.15: Improve rtl838x dsa driver error handlingPascal Ernster2023-01-051-24/+32
| | | | | | | | | Make sure functions calling rtl838x_smi_wait_op() return its return value in target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c. This brings the code style in line with the rtl839x implementation. Suggested-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: return correct error value for phy opsPascal Ernster2023-01-051-2/+2
| | | | | | | | | | | | | | | | | | | | | A behavioural change was introduced with commit 758c88b96963 ("realtek: Whitespace and codestyle cleanup") causing rtl838x_read_phy() and rtl838x_write_phy() to unconditionally return -ETIMEDOUT. As a result, probing the device during boot fails: Error setting up netdev, freeing it again. rtl838x-eth: probe of 1b00a300.ethernet failed with error -5 Fix the bootloop caused by this regression with kernel 5.15 on rtl838x devices, by properly returning 0 on success. Tested on a Netgear GS108T v3, a Netgear GS310TP v1, a Zyxel GS1900-8HP v1 and an HPE 1920-8G. Fixes: 758c88b969639d0e6b684669d2e54dd1be3102f4 ("realtek: Whitespace and codestyle cleanup") Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Pascal Ernster <git@hardfalcon.net>
* realtek: Migrate to upstream generic MIPS addressesOlliver Schinagl2023-01-053-4/+4
| | | | | | | | | | Upstream generic MIPS uses 0x80100000 and 0x80100400 for the LOADADDR and ENTRY addresses. As we do not want to diverge from upstream and patch upstream when not needed, adjust our addresses as well to be future proof. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Tested-by: Jan Hoffmann <jan@3e8.eu> # HPE 1920-8G, HPE 1920-48G
* ncurses: update to 6.4Linhui Liu2023-01-056-21/+21
| | | | | | Update to the latest released version. Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* ramips: add Unielec U7621-06 32M build targetIgnas Poklad2023-01-052-0/+90
| | | | | | | | | Add 32M build target Rest of the details as per commit 46ab81e405d2 ("ramips add support for UniElec U7621-06") Signed-off-by: Ignas Poklad <ignas2526@gmail.com>
* ath79: convert Netgear WNDAP360 WiFis to nvmem-cellsNick Hainke2023-01-043-31/+32
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Merge art into partition node. Signed-off-by: Nick Hainke <vincent@systemli.org>
* lantiq-xrx200: fix wan LED on o2 box 6431Florian Maurer2023-01-041-1/+4
| | | | | | | | | | | The WIFI LED already worked for me with the latest openwrt 22.03 version. Wifi LED did not with an older 22.x version (in gluon - there phy0radio did nothing but phy0tpt did show activity the WAN interface has the name "wan" and not "pppoe-wan" on this device fixes #7757 (and FS#2987) Signed-off-by: Florian Maurer <f.maurer@outlook.de>
* toolchain/nasm: update to 2.16.01Linhui Liu2023-01-041-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ChangeLog: Version 2.16.01 _This is a documentation update release only._ (*) Fix the creation of the table of contents in the HTML version of the documentation. Version 2.16 (*) Support for the `rdf' format has been discontinued and all the RDOFF utilities has been removed. (*) The `--reproducible' option now leaves the filename field in the COFF object format blank. This was always rather useless since it is only 18 characters long; as such debug formats have to carry their own filename information anyway. (*) Fix handling of MASM-syntax reserved memory (e.g. `dw ?') when used in structure definitions. (*) The preprocessor now supports functions, which can be less verbose and more convenient than the equivalent code implemented using directives. See section 4.4. (*) Fix the handling of `%00' in the preprocessor. (*) Fix incorrect handling of path names affecting error messages, dependency generation, and debug format output. (*) Support for the RDOFF output format and the RDOFF tools have been removed. The RDOFF tools had already been broken since at least NASM 2.14. For flat code the ELF output format recommended; for segmented code the `obj' (OMF) output format. (*) New facility: preprocessor functions. Preprocessor functions, which are expanded similarly to single-line macros, can greatly simplify code that in the past would have required a lengthy list of directives and intermediate macros. See section 4.4. (*) Single-line macros can now declare parameters (using a `&&' prefix) that creates a quoted string, but does _not_ requote an already quoted string. See section 4.2.1. (*) Instruction table updated per public information available as of November 2022. (*) All warnings in the preprocessor have now been assigned warning classes. See appendix A. (*) Fix the invalid use of `RELA'-type relocations instead of `REL'- type relocations when generating DWARF debug information for the `elf32' output format. (*) Fix the handling `at' in `istruc' when the structure contains local labels. See section 5.9.2. (*) When assembling with `--reproducible', don't encode the filename in the COFF header for the `coff', `win32' or `win64' output formats. The COFF header only has space for an 18-character filename, which makes this field rather useless in the first place. Debug output data, if enabled, is not affected. (*) Fix incorrect size calculation when using MASM syntax for non- byte reservations (e.g. `dw ?'.) (*) Allow forcing an instruction in 64-bit mode to have a (possibly redundant) REX prefix, using the syntax `{rex}' as a prefix. (*) Add a `{vex}' prefix to enforce VEX (AVX) encoding of an instruction, either using the 2- or 3-byte VEX prefixes. (*) The `CPU' directive has been augmented to allow control of generation of VEX (AVX) versus EVEX (AVX-512) instruction formats, see section 7.11. (*) Some recent instructions that previously have been only available using EVEX encodings are now also encodable using VEX (AVX) encodings. For backwards compatibility these encodings are not enabled by default, but can be generated either via an explicit `{vex}' prefix or by specifying either `CPU LATEVEX' or `CPU NOEVEX'; see section 7.11. (*) Document the already existing `%unimacro' directive. See section 4.5.12. (*) Fix a code range generation bug in the DWARF debug format (incorrect information in the `DW_AT_high_pc' field) for the ELF output formats. This bug happened to cancel out with a bug in older versions of the GNU binutils linker, but breaks with other linkers and updated or other linkers that expect the spec to be followed. (*) Fix segment symbols with addends, e.g. `jmp _TEXT+10h:0' in output formats that support segment relocations, e.g. the `obj' format. (*) Fix various crashes and hangs on invalid input. Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* ramips: enable Wi-Fi LED support for Afoundry EW1200Shiji Yang2023-01-041-2/+14
| | | | | | Add LED properties to PCIe node to enable Wi-Fi LED support. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: enable Wi-Fi LED support for Zbtlink ZBT-WE1326Shiji Yang2023-01-041-2/+14
| | | | | | Add LED properties to PCIe node to enable Wi-Fi LED support. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: add basic support for tp-link er605-v2Nikolay Martynov2023-01-045-0/+224
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a MT7621-based device with 128MB NAND flash, 256MB RAM, and a USB port. The board has headers to attach console. In order for them to work two solder bridges near those pads need to be made. The defice has the following partition table: ``` 0x000000000000-0x000000080000 : "u-boot" 0x000000080000-0x000000100000 : "u-boot-env" 0x000000100000-0x000000140000 : "factory" 0x000000140000-0x000007e00000 : "firmware" 0x000007e00000-0x000008000000 : "panic-ops" ``` `firmware` partition contains UBI volumes. Unfortunately I accidentally wiped partition and I no longer have access to it. `firmware` partition contains 'secondary' U-Boot which is run by 'first' u-boot. It also contains various configuration partitions that include device info and MAC address. There also seems to be 'primary' and 'backup' set of 'main' volumes. U-boot has `mtkupgrade` command that just overrides data on firmware partitions. Firmware file provided by TP-Link cannot be used with that command. U-boot also has 'recovery' http server. Unfortunately I was not able to make it work with manufacturer's firmware. Manufacturer's firmware essentially contains multiple UBI volumes along with 'partition table'. Unfortunately I no longer can properly run manufacturer's firmware so I cannot at the moment try to a support for building 'factory' images. This patch adds support for initramfs image as well as sysupgrade image. This seems to be pretty standard MT7621 board otherwise. Things that work: * network * leds * usb * factory MAC detection Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
* ramips: add missing LEDs to Asus RT-AX53UMarian Sarcinschi2023-01-043-3/+19
| | | | | | | | | | | | | | | | This patch adds the missing LEDs to Asus RT-AX53U. Based on PR #10400 and patch provided in #11068 - enable the two LEDs controlled by mt7915e for wireless; - add label to power LED so it works properly and fix formatting; - add the USB LED; - switch LEDs are best left to be controlled by hardware for now. Co-Authored-By: Ivan Rozhuk <rozhuk.im@gmail.com> Co-Authored-By: Shiji Yang <yangshiji66@qq.com> Co-Authored-By: Hartmut Birr <e9hack@gmail.com> Tested-by: Felix Baumann <felix.bau@gmx.de> Tested-by: Marian Sarcinschi <znevna@gmail.com> Signed-off-by: Marian Sarcinschi <znevna@gmail.com>
* CI: build: fix external toolchain use with release tag testsChristian Marangi2023-01-041-1/+1
| | | | | | | | | | | | | | When a new tag for a release is created, the just checkout repo from github actions will already have such tag locally created. This will result in git fetch --tags failing with error rejecting the remote tag with (would clobber existing tag). Add -f option to overwrite any local tags and always fetch them from remote. Fixes: e24a1e6f6d7f ("CI: build: add support for external toolchains from stable branch") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: fix wlan mac address for Aruba AP-303HBjoern Dobe2023-01-041-4/+6
| | | | | | | | | | | Assigns the correct mac address from nvmen to the wlan interfaces. This Mac address corresponds to the label "Wireless MAC" on the device and the stock firmware. Removes duplicate entry of calibration variant for both radios. Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjoern Dobe <bjoern@dobecom.de>
* generic: 5.15: backport qca8k fixup for mgmt and mdio read/writeChristian Marangi2023-01-045-0/+531
| | | | | | | | Backport qca8k fixup for mgmt and mdio read/write for kernel 5.15 fixup port dropping and configuration issue. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* generic: 5.10: backport Treat IPv4 segment's lowest address as unicastSeth David Schoen2023-01-041-0/+32
| | | | | | | | | | | | | | | | | | | Backport patch from kernel 5.14. Treat only the highest, not the lowest, IPv4 address within a local subnet as a broadcast address, as subnets do not need two different broadcast addresses and networking documentation consistently prefers the highest address as broadcast. This patch was merged in upstream net-next tree in May 2021 at https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=94c821c74bf5 This eventually frees up one address per subnet. It matches behavior suggested in our Internet-Draft, and also the default behavior of OpenBSD and FreeBSD. Signed-off-by: Seth David Schoen <schoen@loyalty.org>
* kernel: bump 5.15 to 5.15.86John Audia2023-01-0355-226/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.15/101-Use-stddefs.h-instead-of-compiler.h.patch[1] ipq806x/patches-5.15/122-01-clk-qcom-clk-krait-fix-wrong-div2-functions.patch[2] bcm27xx/patches-5.15/950-0198-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch[3] Manually rebased: ramips/patches-5.15/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch[4] Added patch/backported: ramips/patches-5.15/107-PCI-mt7621-Add-sentinel-to-quirks-table.patch[5] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=c160505c9b574b346031fdf2c649d19e7939ca11 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=a051e10bfc6906d29dae7a31f0773f2702edfe1b 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=ec1727f89ecd6f2252c0c75e200058819f7ce47a 4. Quilt gave this output when I applied the patch to rebase it: % quilt push -f Applying patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch patching file arch/mips/ralink/Kconfig patching file drivers/pci/controller/Kconfig patching file drivers/pci/controller/Makefile patching file drivers/staging/Kconfig patching file drivers/staging/Makefile patching file drivers/staging/mt7621-pci/Kconfig patching file drivers/staging/mt7621-pci/Makefile patching file drivers/staging/mt7621-pci/TODO patching file drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt patching file drivers/staging/mt7621-pci/pci-mt7621.c Hunk #1 FAILED at 1. Not deleting file drivers/staging/mt7621-pci/pci-mt7621.c as content differs from patch 1 out of 1 hunk FAILED -- saving rejects to file drivers/staging/mt7621-pci/pci-mt7621.c.rej patching file drivers/pci/controller/pcie-mt7621.c Applied patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch (forced; needs refresh) Upon inspecting drivers/staging/mt7621-pci/pci-mt7621.c.rej, it seems that the original patch wants to delete drivers/staging/mt7621-pci/pci-mt7621.c but upstream's version was not an exact match. I opted to delete that file. 5. Suggestion by hauke: https://github.com/torvalds/linux/commit/19098934f910b4d47cb30251dd39ffa57bef9523 "This patch is in upstream kernel, but it was backported to the old staging driver in kernel 5.15." Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* oxnas: sata_oxnas: use ata_link_errRobert Marko2023-01-031-1/+1
| | | | | | | | | | | | | | Kernel 5.15.86 has backported ("ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros") and this is now causing compilation errors for oxnas SATA driver due to usage of ata_link_printk(). Upstream has migrated to using the appropriate ata_link_{err, warn, notice, info} calls a while ago so its not affected. Lets do the same for oxnas SATA driver and use ata_link_err() instead of ata_link_printk(). Signed-off-by: Robert Marko <robimarko@gmail.com>
* octeontx: add 5.15 testing kernelNick Hainke2023-01-033-14/+24
| | | | | | | | | | Add 5.15 as testing. Refreshed: - 0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
* octeontx: 5.15: copy configNick Hainke2023-01-032-0/+471
| | | | | | Copy config from kernel 5.10 to kernel 5.15. Signed-off-by: Nick Hainke <vincent@systemli.org>
* zynq: add 5.15 testing kernelNick Hainke2023-01-032-10/+14
| | | | | | | | Enable testing kernel. Reviewed-by: Luis Araneda <luaraneda@gmail.com> Tested-by: Luis Araneda <luaraneda@gmail.com> (Digilent Zybo Z7-20) Signed-off-by: Nick Hainke <vincent@systemli.org>
* zynq: 5.15: copy configNick Hainke2023-01-031-0/+548
| | | | | | Copy config from kernel 5.10 to kernel 5.15. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq40xx: delete files used for building 5.10 kernelNick Hainke2023-01-0325-2442/+0
| | | | | | | The kernel 5.15 now defaults. Remove unnecessary files. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
* bridger: update to the latest versionFelix Fietkau2023-01-031-3/+3
| | | | | | | | | def7755c459d add missing copyright headers f68307fd96d7 add hairpin mode support 9ee8f433ba4e nl: do not pass NDA_VLAN with vid=0 978c1f9eed07 add support for the bridge port isolated flag Signed-off-by: Felix Fietkau <nbd@nbd.name>
* realtek: Migrate to libdeflateOlliver Schinagl2023-01-023-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Libdeflate is a more advanced gzip compressor, which allows for faster decompression, higher compression speed (factor 3-4), while being fully gzip compatible. Some comparison gzip | libdeflate-gzip | delta | image [openwrt-realtek-rtl839x-*] --------+-----------------+--------+----------------------------------------------- 6589174 | 6298794 | 290380 | d-link_dgs-1210-52-initramfs-kernel.bin 6291632 | 6029488 | 262144 | d-link_dgs-1210-52-squashfs-factory_image1.bin 6292270 | 6030128 | 262142 | d-link_dgs-1210-52-squashfs-sysupgrade.bin 6589142 | 6298760 | 290382 | zyxel_gs1900-48-initramfs-kernel.bin 6292264 | 6030122 | 262142 | zyxel_gs1900-48-squashfs-sysupgrade.bin and changing lzma to (libdeflate-)gzip on existing rtl930x target: gzip | libdeflate-gzip | delta | image [openwrt-realtek-rtl930x-*] --------+-----------------+--------+-------------------------------------- 6816230 | 6510382 | 305848 | zyxel_xgs1250-12-initramfs-kernel.bin Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Reviewed-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Sander Vanheule <sander@svanheule.net>
* tools: Add gzip-libdeflate advanced compressorMarkus Stockhausen2023-01-023-0/+38
| | | | | | | | | | | | | | | | | Several devices provide U-Boot versions with only gzip compressed kernel support (e.g. Realtek switches). This compression method produces larger images than lzma. To save space on flash and avoid going the hard way with lzma-loader we can make use of enhanced gzip tool based on libdeflate compression library from https://github.com/ebiggers/libdeflate. It keeps 100% deflate/gzip compatibility while improving compression ratio. The image can be unpacked by the default inflate routines inside U-Boot. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [Switched to v1.15 and made it work with cmake] Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Reviewed-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Sander Vanheule <sander@svanheule.net>
* realtek: Disable boston clockOlliver Schinagl2023-01-018-8/+4
| | | | | | | We are not on the 'boston' platform so no point in having that clock driver enabled. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* treewide: Trigger reinstall of all wolfssl dependenciesHauke Mehrtens2023-01-014-4/+4
| | | | | | | | The ABI of the wolfssl library changed a bit between version 5.5.3 and 5.5.4. This release update will trigger a rebuild of all packages which are using wolfssl to make sure they are adapted to the new ABI. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: update to 5.5.4-stableNick Hainke2023-01-013-36/+3
| | | | | | | | | | | | | Remove upstreamed: - 001-Fix-enable-devcrypto-build-error.patch Refresh patch: - 100-disable-hardening-check.patch Release notes: https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.4-stable Signed-off-by: Nick Hainke <vincent@systemli.org>
* toolchain/binutils: switch to version 2.39 by defaultHauke Mehrtens2023-01-012-2/+2
| | | | | | | | | | | | | | | | This was build tested with all core packages on all targets successfully. This was run tested on the following systems: * lantiq/xrx200 musl * sunxi/cortex53 musl * x86/64 musl * x86/64 glibc Some trusted firmware arm builds needed some fixes to build with binutils 2.39, this was merged before. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/binutils: backport stable patchesHauke Mehrtens2022-12-3111-0/+1260
| | | | | | | | | | | | Add the patches with real changes from the binutils 2.39 stable branch. I am not aware that we ran into any of these problems, but I think it is better to take the existing stable patches. They were exported like this: git format-patch binutils-2_39...origin/binutils-2_39-branch I removed the patches changing the version numbers only. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tfa-layerscape: Use trusted-firmware-a.mkHauke Mehrtens2022-12-312-84/+69
| | | | | | | | This converts the trusted firmware arm build Makefile to make use of the common trusted-firmware-a.mk file. This also fixes the build with binutils 2.39. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-mvebu: Use host flags for cryptest compilationHauke Mehrtens2022-12-312-0/+15
| | | | | | | | | Without these changes it used the system LDFLAGS for the compilation of the cryptopp library. This does not always work when we add "-no-warn-rwx-segments" which is done to support binutils 2.39 inside of OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-sunxi: Use common trusted-firmware-a.mkHauke Mehrtens2022-12-312-39/+27
| | | | | | | Make use of the definitions from trusted-firmware-a.mk to build the Trusted firmware arm. This fixes the build with binutils 2.39. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: sysupgrade: allow flashing Linksys factory firmwareTony Ambardar2022-12-311-0/+18
| | | | | | | | | | | | | | | | | Allow forced flashing of a factory firmware image, after checking for the correct FIT magic header and Linksys board-specific footer. Details of the footer are already described in scripts/linksys-image.sh. This is convenient as it avoids using a TFTP server or OEM GUI, and allows restoring OEM firmware or installing a "breaking" OpenWrt update (e.g DSA migration and kernel repartition) directly from the command line. Devices supported at this time include EA6350v3, EA8300, MR8300 and WHW01. Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Wyatt Martin <wawowl@gmail.com> # WHW01 Tested-by: Tony Ambardar <itugrok@yahoo.com> # EA6350v3 Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* base-files: stage2: add 'tail' to sysupgrade environmentTony Ambardar2022-12-311-1/+1
| | | | | | | This is used to access footer data in firmare files, and is simpler and less error-prone than using 'dd' with calculated offsets. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq40xx: migrate Linksys WHW01 to DSA and re-enableTony Ambardar2022-12-313-2/+22
| | | | | | | | | Convert Linksys WHW01 network configuration to DSA and re-enable builds. Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Wyatt Martin <wawowl@gmail.com> Signed-off-by: Wyatt Martin <wawowl@gmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq40xx: fix up Linksys WHW01 board name, device definitionTony Ambardar2022-12-315-12/+9
| | | | | | | | | | | | | | Update the board name defined in DTS to match online documentation and the name encoded into factory firmware. This helps supports flashing firmware factory images using 'sysupgrade'. Original WHW01 device definition assumes the rootfs IMAGE_SIZE is 33 MB instead of the correct 74 MB, and defines factory images which include extra adjustments/padding that do not match OEM factory images and may cause problems flashing. Update image size and build recipe to fix these. Suggested-by: Wyatt Martin <wawowl@gmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq40xx: re-enable EA6350v3, EA8300, MR8300 buildsTony Ambardar2022-12-314-23/+38
| | | | | | | | | | | | | | | | | | | | | | | | | Raise the kernel size from 3 MB to 5 MB for EA6350v3, EA8300 and MR8300, and correspondingly reduce the rootfs size by 2 MB: * modify partition definitions in related .dts files * modify device kernel/image sizes in generic.mk Update to compat-version 2.0 to force factory image usage on sysupgrade, noting the current version 1.1 is an unreleased update for DSA migration. Also update the compat-version message, explaining the need to run one of the following console commands to update U-Boot's kernel-size variable before flashing the OpenWrt factory image. fw_setenv kernsize 500000 # (OpenWrt command line) setenv kernsize 500000 ; saveenv # (U-Boot serial console) Finally, re-enable the 3 devices. Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Nicolas TORMO <badulesia.granieri@gmail.com> # MR8300 Tested-by: Tony Ambardar <itugrok@yahoo.com> # EA6350v3 Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* mbedtls: update to version 2.28.2Hauke Mehrtens2022-12-312-6/+6
| | | | | | | | | | | | | | | | | | | Changelog: https://github.com/Mbed-TLS/mbedtls/releases/tag/v2.28.2 This release of Mbed TLS provides bug fixes and minor enhancements. This release includes fixes for security issues. Fixes the following CVEs: * CVE-2022-46393: Fix potential heap buffer overread and overwrite in DTLS if MBEDTLS_SSL_DTLS_CONNECTION_ID is enabled and MBEDTLS_SSL_CID_IN_LEN_MAX > 2 * MBEDTLS_SSL_CID_OUT_LEN_MAX. * CVE-2022-46392: An adversary with access to precise enough information about memory accesses (typically, an untrusted operating system attacking a secure enclave) could recover an RSA private key after observing the victim performing a single private-key operation if the window size used for the exponentiation was 3 or smaller. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: fix receiving multicast packets on multiple sta interfacesFelix Fietkau2022-12-301-26/+30
| | | | | | Also fix MLO sta sdata link initialization Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm47xx: replace "Devices-database-update-patch" with upstream patchesNick Hainke2022-12-307-268/+428
| | | | | | | | | | | | | Replace "320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch" with upstream patches: - 320-v5.17-MIPS-BCM47XX-Add-board-entry-for-Linksys-WRT320N-v1.patch - 321-v5.17-MIPS-BCM47XX-Add-support-for-Netgear-R6300-v1.patch - 322-v5.17-MIPS-BCM47XX-Add-support-for-Netgear-WN2500RP-v1-v2.patch - 323-v6.0-MIPS-BCM47XX-Add-support-for-Netgear-WNR3500L-v2.patch - 324-v5.17-MIPS-BCM47XX-Add-LEDs-and-buttons-for-Asus-RTN-10U.patch - 325-v5.17-MIPS-BCM47XX-Define-Linksys-WRT310N-V2-buttons.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* bcm47xx: add tags to upstreamed patchesNick Hainke2022-12-309-0/+0
| | | | | | All of the mtd patches are upstreamed to 5.18. Add tags indicating this. Signed-off-by: Nick Hainke <vincent@systemli.org>
* netifd: update to the latest versionFelix Fietkau2022-12-301-3/+3
| | | | | | | | | | | | 2cffe0c44e62 treewide: correctly apply IFNAMSIZ limit 96bcbb2e4eb6 wireless: allow set_retry ubus notify command to trigger a wdev restart a2e8cd75dbf6 wireless: add support for disabling multicast-to-unicast per virtual interface e9f44189ade7 system: move netdev types to system-linux.c where they are used a3fab0119ef1 utils: include utils.h last 7ce73fc16765 vlandev: propagate topology changes 81c1fbcba2f2 device: fix vlan device issues with disappearing lower devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* CI: labeler: Add target label to target packagesHauke Mehrtens2022-12-301-0/+29
| | | | | | | | This adds the target label also to changes in packages which are target specific like the boot loader of a target or some drivers which are only use on one target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: enable BBT on NAND in I-O DATA devicesINAGAKI Hiroshi2022-12-302-0/+10
| | | | | | | | | | | This patch enables MediaTek NAND BBT on I-O DATA devices manufactured by MSTC (MitraStar Technology Corp.). [WN-AX2033GR] Tested-by: Yanase Yuki <dev@zpc.sakura.ne.jp> [WN-AX1167GR2, WN-DX1167R, WN-DX1200GR, WN-DX2033GR] Tested-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mediatek: drop redmi-ax6000 variant with modified envChuanhong Guo2022-12-305-61/+0
| | | | | | | | | | | | | | | | | | | This variant uses xiaomi factory u-boot and modified u-boot-env & bootcmd. By modifying uboot-env, the xiaomi firmware recovery provided in the vendor u-boot doesn't work anymore. It's possible to put u-boot into a state where it refuese to take any serial input. If the u-boot is in this state, users can't restore their firmware without taking the flash off the board. We now have a -stock variant where the vendor u-boot is used in a way that xiaomi firmware recovery still works, and a -ubootmod variant where we get rid of all xiaomi components, have more usable space and no uart console lock. These two should cover all use cases and we don't need this variant anymore. Drop this redmi-ax6000 variant. Existing users of this variant should perform a u-boot mod or restore to the -stock layout. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: Refresh patchesHauke Mehrtens2022-12-291-2/+2
| | | | | | The patch was not applying cleanly any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tree-wide: Do not use package librt and libpthreadHauke Mehrtens2022-12-297-16/+6
| | | | | | | | | | | The libraries libpthread, libdl, libutil, libanl have been integrated into the libc library in version 2.34. it is not needed to explicitly link them any more. Most of the functions have been moved from the librt.so into libc.so some time ago already. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 15:17:49 +0000