aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.158John Audia2022-12-116-10/+10
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.157John Audia2022-12-1122-91/+58
| | | | | | | | | | | | | | | Manually rebased: backport-5.10/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch hack-5.10/645-netfilter-connmark-introduce-set-dscpmark.patch Removed upstreamed: pending-5.10/706-netfilter-nf_flow_table-add-missing-locking.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.157&id=b8e494240e69f91517256adcd6fda62d0671772d Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: add symbol in generic config for 5.10.157John Audia2022-12-111-0/+1
| | | | | | Add CONFIG_INET_TABLE_PERTURB_ORDER=16 to generic config Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.82John Audia2022-12-1117-204/+204
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-stock Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-stock Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.81John Audia2022-12-1149-180/+144
| | | | | | | | | | | | | | | | | | | | Manually rebased: backport-5.15/715-v6.0-net-ethernet-mtk_eth_soc-add-the-capability-to-run-m.patch hack-5.15/645-netfilter-connmark-introduce-set-dscpmark.patch[1] Removed upstreamed: pending-5.15/701-netfilter-nf_flow_table-add-missing-locking.patch[2] All other patches automatically rebased 1. Rebase by Kevin 'ldir' Darbyshire-Bryant<ldir@darbyshire-bryant.me.uk> 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.81&id=8db9e60cdfdae5b049e32e82323da8f0f989066a Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-stock Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-stock Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: add symbol in generic config for 5.15.81John Audia2022-12-111-0/+1
| | | | | | Add CONFIG_INET_TABLE_PERTURB_ORDER=16 to generic config Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: backport the dev_set_threaded export to 5.10Felix Fietkau2022-12-101-0/+24
| | | | | | Fixes mt76 build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: backport mtk_wed.h from 5.15 to 5.10Felix Fietkau2022-12-101-0/+209
| | | | | | Fixes mt76 build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2022-12-102-1611/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ec46d7486ab9 sync with upstream 2575de3aea33 wifi: mt76: mt7921: introduce chanctx support 473cebb3c3e1 wifi: mt76: fix bandwidth 80MHz link fail in 6GHz band de3e77227f62 wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices f0c191a9f6cd wifi: mt76: mt7996: add missing argument in mt7996_queue_rx_skb() d3838a52df62 wifi: mt76: mt7996: enable use_cts_prot support 98492dff3bec wifi: mt76: mt7996: enable ack signal support 2a41e7a82f86 wifi: mt76: mt7996: add support to configure spatial reuse parameter set 194cb3392829 mt76: mt7915: add missing of_node_put() f91d6f3b73ac wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host 1ce4970d799f wifi: mt76: mt7915: fix mt7915_rate_txpower_get() resource leaks 379f3fc0fc43 wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_ie_countdown() 233c272f0f86 wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_rx_radar_detected() 5616c4cc1d5d wifi: mt76: mt7996: fix integer handling issue of mt7996_rf_regval_set() f9598e6d4c2c wifi: mt76: mt7915: split mcu chan_mib array up b252d94bd763 wifi: mt76: mt7915: check return value before accessing free_block_num f1cc3696d725 wifi: mt76: mt7996: check return value before accessing free_block_num b94ba58fa698 wifi: mt76: mt7915: check the correctness of event data 35843a1670c0 wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr() 01a256c1dc41 wifi: mt76: mt7996: drop always true condition of __mt7996_reg_addr() 5185bbab8953 wifi: mt76: mt7996: fix endianness warning in mt7996_mcu_sta_he_tlv eeb6949c4d06 wifi: mt76: mt76x0: fix oob access in mt76x0_phy_get_target_power 063823aba978 wifi: mt76: mt7921: add support to update fw capability with MTFG table a44109267e4e wifi: mt76: mt7996: fix unintended sign extension of mt7996_hw_queue_read() be5dbb781068 wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read() adf9042b6f63 wifi: mt76: fix coverity uninit_use_in_call in mt76_connac2_reverse_frag0_hdr_trans() 551201379efe wifi: mt76: move leds field in leds struct 14fbb6d6e85e wifi: mt76: move leds struct in mt76_phy 81edc468fc62 wifi: mt76: mt7915: enable per-phy led support bbad827e447f wifi: mt76: mt7615: enable per-phy led support 8e7e7e52fc09 wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails 95c66d651133 wifi: mt76: handle possible mt76_rx_token_consume failures 52d04463a66e wifi: mt76: dma: rely on queue page_frag_cache for wed rx queues 7fae1de12ae7 wifi: mt76: mt7921: resource leaks at mt7921_check_offload_capability() Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to linux 6.1-rc8Felix Fietkau2022-12-10127-10176/+4391
| | | | | | This should help stay in sync with upstream development Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to version 2022-12-01Felix Fietkau2022-12-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 3deafbad7061 wifi: mt76: mt7915: fix uninitialized irq_mask 6ca31dc64da4 wifi: mt76: mt7921: introduce remain_on_channel support 7962005b0734 wifi: mt76: connac: rework macros for unified command 3b2882ca704e wifi: mt76: connac: update struct sta_rec_phy c4d46cb1dd45 wifi: mt76: connac: rework fields for larger bandwidth support in sta_rec_bf 532c322fd72f wifi: mt76: connac: add more unified command IDs 4c43e060726b wifi: mt76: connac: introduce unified event table 4c423058920d wifi: mt76: connac: add more bss info command tags 143d7ab8ef92 wifi: mt76: connac: add more starec command tags 733ef9887b2c wifi: mt76: connac: introduce helper for mt7996 chipset 8e309b5560e1 wifi: mt76: mt7921: fix wrong power after multiple SAR set d791ed1f5877 wifi: mt76: mt7915: add missing MODULE_PARM_DESC 3b8eed9c3866 wifi: mt76: mt7915: add support to configure spatial reuse parameter set 417cca39bab2 wifi: mt76: introduce rxwi and rx token utility routines 629f8631f54f wifi: mt76: add WED RX support to mt76_dma_{add,get}_buf 13c2dc8993b6 wifi: mt76: add WED RX support to mt76_dma_rx_fill 86e94f4162b7 wifi: mt76: add WED RX support to dma queue alloc 1361519851f3 wifi: mt76: add info parameter to rx_skb signature a2e5e0667553 wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine f38faf294310 wifi: mt76: mt7915: enable WED RX support a887a5feb3d1 wifi: mt76: mt7915: enable WED RX stats 4c23061ebcfc wifi: mt76: mt7915: add basedband Txpower info into debugfs a9c88ded5cac wifi: mt76: mt7915: enable .sta_set_txpwr support 2c172bb6cd9f wifi: mt76: mt7915: fix band_idx usage 1b88dd07f153 linux-firmware: update firmware for MT7915 6196f6080506 linux-firmware: update firmware for MT7916 daae6ca5d81f linux-firmware: update firmware for MT7986 e7a9f7a0440c wifi: mt76: mt7915: fix unused-but-set warning 340f3be65397 wifi: mt76: fix coverity overrun-call in mt76_get_txpower() aa7132da0326 wifi: mt76: mt7915: fix endianness of mt7915_mcu_set_obss_spr_pd() a36017d09324 wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clc 66dc48bea883 wifi: mt76: do not send firmware FW_FEATURE_NON_DL region fa79eeeadc2d mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2() ff94604b2edd wifi: mt76: mt7915: introduce mt7915_get_power_bound() 5082a58f8082 wifi: mt76: mt7915: enable per bandwidth power limit support a7b915302147 wifi: mt76: mt7915: fix scene detection flow of spatial reuse 525592c28d6b wifi: mt76: mt7915: rely on band_idx of mt76_phy cdd7229e769b wifi: mt76: mt7915: mmio: fix naming convention Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: use wpa_supplicant for unencrypted mesh connectionsFelix Fietkau2022-12-103-3/+7
| | | | | | It's more reliable than using iw Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath79: fix Teltonika RUT230 v1 MAC assignmentDavid Bauer2022-12-091-2/+2
| | | | | | | | | The MAC-Address setup for the Teltonika RUT230 v1 was swapped for the LAN / WAN ports. Also the Label-MAC was assigned incorrect, as the WiFi MAC is printed on the case as part of the SSID, however only the LAN MAC-Address is designated as a MAC-Address. Signed-off-by: David Bauer <mail@david-bauer.net>
* realtek: update GPIO bindings for DGS-1210-10PJan-Niklas Burfeind2022-12-091-4/+26
| | | | | | | | | | | | | | | | add three missing LEDs - PoE-Max - Link/Act - PoE add two missing buttons - mode - reset The last was dropped in commit 61a3d0075b15 ("realtek: update GPIO bindings in the dts files in dts-5.10") Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* realtek: d-link: add support for dgs-1210-28mp-fAndreas Böhler2022-12-084-90/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | General hardware info: ---------------------- D-Link DGS-1210-28MP rev. F1 is a switch with 24 ethernet ports and 4 combo ports, all ports Gbit capable. It is based on a RTL8382 SoC @ 500MHz, DRAM 128MB and 32MB flash. 24 ethernet ports are 802.3af/at PoE capable with a total PoE power budget of 370W. Power over Ethernet: -------------------- The PSE hardware consists of three BCM59121 PSE chips, serving 8 ports each. They are controlled by a Nuvoton MCU. In order to enable PoE, the realtek-poe package is required. It is installed by default, but currently it requires the manual editing of /etc/config/poe. Keep in mind that the port number assignment does not match on this switch, alway 8 ports are in reversed order: 8-1, 16-9 and 24-17. LEDs and Buttons: ----------------- On stock firmware, the mode button is supposed to switch the LED indicators of all port LEDs between Link Activity and PoE status. The currently selected mode is visualized using the respective LEDs. PoE Max indicates that the maximum PoE budget has been reached. Since there is currently no support for this behavior, these LEDs and the mode button can be used independently. Serial connection: ------------------ The UART for the SoC (115200 8N1) is available via unpopulated standard 0.1" pin header marked J6. Pin1 is marked with arrow and square. Pin 1: Vcc 3.3V Pin 2: Tx Pin 3: Rx Pin 4: Gnd OEM installation from Web Interface: ------------------------------------ 1. Make sure you are booting using OEM in image 2 slot. If not, switch to image2 using the menus System > Firmware Information > Boot from image2 Tools > reboot 2. Upload image in vendor firmware via Tools > Backup / Upgrade Firmware > image1 3. Toogle startup image via System > Firmware Information > Boot from image1 4. Tools > reboot Other installation methods not tested, but since the device shares the board with the DGS-1210-28, the following should work: Boot initramfs image from U-Boot: --------------------------------- 1. Press Escape key during `Hit Esc key to stop autoboot` prompt 2. Press CTRL+C keys to get into real U-Boot prompt 3. Init network with `rtk network on` command 4. Load image with `tftpboot 0x8f000000 openwrt-rtl838x-generic-d-link_dgs-1210-28mp-f-initramfs-kernel.bin` command 5. Boot the image with `bootm` command Signed-off-by: Andreas Böhler <dev@aboehler.at>
* uboot-bcm4908: update to the latest genericRafał Miłecki2022-12-081-3/+3
| | | | | | 4435700d18 Remove redundant YYLOC global declaration Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ustream-ssl: update to Git version 2022-12-07Hauke Mehrtens2022-12-081-4/+4
| | | | | | | | | 9217ab4 ustream-openssl: Disable renegotiation in TLSv1.2 and earlier 2ce1d48 ci: fix building with i.MX6 SDK 584f1f6 ustream-openssl: wolfSSL: provide detailed information in debug builds aa8c48e cmake: add a possibility to set library version Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* CI: kernel: don't checkout and install feedsChristian Marangi2022-12-071-1/+0
| | | | | | | We don't need to checkout feed and install feeds for kernel tests. This saves up to 2 minutes for each target kernel build test. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: build: skip sdk adapt to external toolchain on cache hitChristian Marangi2022-12-071-1/+1
| | | | | | | | | | | | On cache hit, skip sdk adapt to external toolchain. This is needed because we cache the already extracted sdk and that is already adapted to be used as external toolchain. Rerunning the adap step will result in the test to fail for missing file as the file are already got wrapped to the external toolchain format. Fixes: 42f0ab028e2e ("CI: build: fix use of sdk as toolchain") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ramips: add support for Wavlink WS-WN572HP3 4GJan-Niklas Burfeind2022-12-073-0/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wavlink WS-WN572HP3 4G is an 802.11ac dual-band outdoor router with LTE support. Specifications; * Soc: MT7621DAT * RAM: 128MiB * Flash: NOR 16MiB GD-25Q128ESIG3 * Wi-Fi: * MT7613BEN: 5GHz * MT7603EN: 2.4GHz * Ethernet: 2x 1GbE * USB: None - only used internally * LTE Modem: Quectel EC200T-EU * UART: 115200 baud * LEDs: * 7 blue at the front * 1 Power * 2 LAN / WAN * 1 Status * 3 RSSI (annotated 4G) * 1 green at the bottom (4G LED) * Buttons: 1 reset button Installation: * press and hold the reset button while powering on the device * keep it pressed for ten seconds * connect to 192.168.10.1 via webbrowser (chromium/chrome works, at least Firefox 106.0.3 does not) * upload the sysupgrade image, confirm the checksum, wait 2 minutes until the device reboots Revert to stock firmware: * same as installation but use the recovery image for WL-WN572HP3 Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* comgt-ncm: add support for quectel modem EC200T-EUJan-Niklas Burfeind2022-12-072-0/+22
| | | | | | | | | context_type is an integer mapping of pdptype: 1: IPV4 2: IPV6 3: IPV4V6 Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* ramips: define loadaddr for all UniFi devicesDavid Bauer2022-12-071-0/+2
| | | | | | | | Define the load-address for the DTB of all Ubiquiti UniFi devices using FIT images. From the GPL code we can assume these boards are affected by the same relocating issue with the vendor bootloader. Signed-off-by: David Bauer <mail@david-bauer.net>
* fritz-tools: fritz_tffs_nand: cache already read sector idsAndre Heider2022-12-071-1/+17
| | | | | | | This speeds up the tool significantly, especially when using the "-a" argument. Signed-off-by: Andre Heider <a.heider@gmail.com>
* fritz-tools: fritz_tffs_nand: get rid of struct tffs_sectorsAndre Heider2022-12-071-12/+8
| | | | | | This doesn't help and "[0]" gets in the way of bounds checks. Signed-off-by: Andre Heider <a.heider@gmail.com>
* fritz-tools: fritz_tffs_nand: exclude oob code when disabledAndre Heider2022-12-071-6/+9
| | | | | | Skip unnecessary stuff if checking the oob data is disabled. Signed-off-by: Andre Heider <a.heider@gmail.com>
* firewall4: add missing PKG_MIRROR_HASHJo-Philipp Wich2022-12-071-1/+1
| | | | | Fixes: 84183f0d98 ("firewall4: update to latest Git HEAD") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mediatek: also move &slot0 from dtsi down to board dtsDaniel Golle2022-12-073-10/+20
| | | | | | | | | As the referenced MTD partition is only present in the dts, also move &slot0 down to the dts files. Fixes: 64e9b62829 ("mediatek: remove redundant flash entry from dtsi") Fixes: 7dbac3433f ("mediatek: add support for reyee AX3200-E5") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: remove redundant flash entry from dtsiDaniel Golle2022-12-073-74/+16
| | | | | | | | | | Splitting-off the common parts of Ruijie RG-EW3200GX PRO and reyee AX3200-E5 went wrong because the flash descriptiom was kept also in the dtsi. Remove it there, as flash definition is added by both board dts files. Fixes: 7dbac3433f ("mediatek: add support for reyee AX3200-E5") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: add gzip to prereq-build.mkTony Butler2022-12-061-0/+3
| | | | | | | gzip has never been checked for, a system without it would be rare, fix it anyway Signed-off-by: Tony Butler <spudz76@gmail.com>
* CI: build: fix use of sdk as toolchainChristian Marangi2022-12-061-0/+28
| | | | | | | | | | | | | | | | | | | | | | The toolchain included in a sdk have a different format than an external toolchain tar. Since sdk is a more integrated setup doesn't use and include wrapper bin that use the external toolchain config and use an alternative and more standard way to include all the toolchain headers. External toolchain use wrapper.sh to append the configured include header when each tool is called. Fix the sdk toolchain by reverting their own sdk wrapper scripts and to simulate an external toolchain build copying what is done in the toolchain target makefile. This handle compilation error and warning caused by not using fortify header on building packages. Fixes: 006e52545d14 ("CI: build: add support to fallback to sdk for external toolchain") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* build: images: squashfs: add help, fix descriptionTony Butler2022-12-061-1/+4
| | | | | | | | | | | | | | | add help text for `TARGET_SQUASHFS_BLOCK_SIZE` to match the only valid settings accepted by `mksquashfs4` ("block size not power of two or not between 4096 and 1Mbyte") thus for this setting in "KB", the set: `4, 8, 16, 32, 64, 128, 256, 512, 1024` replace `squashfs-lzma` with `squashfs` in the description for `TARGET_ROOTFS_SQUASHFS` because it has various compressions, and not just lzma as it did in the past cosmetic change with no functional effect Signed-off-by: Tony Butler <spudz76@gmail.com>
* ath79: optimize the firmware recipe for Netgear NAND devicesShiji Yang2022-12-061-11/+7
| | | | | | | | | | | | | | 1. Drop useless character '0xff' before fake filesystem header. 2. Reduce useless padding to shrink the size of the sysupgrade image. 3. Do not check the size of sysupgrade image. It does not make sense to check the size of a compressed package. 4. Do not take the size of netgear header into account because it will not be written to Flash. 5. Use the default lzma compression dictionary parameter '-d24' to get better performance. Tested on Netgear R6100 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert Netgear R6100 radio calibration to nvmem-cellsShiji Yang2022-12-062-6/+12
| | | | | | | | use nvmem-cells implementation to avoid copying art calibration data to rootfs. Tested on Netgear R6100 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* tools/cmake: update to 3.25.1Hannu Nyman2022-12-064-5/+5
| | | | | | | | Update cmake to version 3.25.1 * refresh patches Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* kernel: ca8210: Fix crash by zero initializing dataHauke Mehrtens2022-12-062-0/+60
| | | | | | This fixes crashes at bootup on pistachio. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* e2fsprogs: Fix CVE-2022-1304Hauke Mehrtens2022-12-064-2/+102
| | | | | | | | | This fixes CVE-2022-1304: An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: add support for reyee AX3200-E5Alex Hansen2022-12-066-255/+416
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is yet another model of the Ruijie RG-EW3200GX PRO with a slightly different flash layout, install process is the same. Specifications: SoC: MT7622B RAM: 256MB Flash: XMC XM25QH128C or Winbond WQ25Q128JVSQ 16MB SPI NOR Ethernet: 5x1GbE Switch: MT7531BE WiFi: 2.4G: MT7622 5G: MT7915AN+MT7975AN 3LEDs: System LED(blue) + Mesh LED(green) + Mesh LED(red) 2Keys: Mesh button + Reset button UART: Marked J19 on board. 3.3v, 115200n1 Power: 12V 2.5A Flash instruction: 1. Serve the initramfs.img using a TFTP server with address 10.10.10.3. 2. Interrupt the uboot startup process via UART. 3. Select "System Load Linux to SDRAM via TFTP" item. 4. (important) Back up firmware(mtd7) partitions with: dd if=/dev/mtd7 of=/tmp/firmware.bin and then download the firmware.bin image via SCP. 5. Flash the OpenWrt sysupgrade firmware. Recovery stock firmware: 1. Transfer the firmware.bin image to the device. 2. Flash the image with: mtd write firmware.bin firmware Signed-off-by: Alex Hansen <mralexh123@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firewall4: update to latest Git HEADJo-Philipp Wich2022-12-061-3/+3
| | | | | | | | 700a925 fw4: prevent null access when no ipsets are defined 6443ec7 config: drop input traffic by default 119ee1a ruleset: drop ctstate invalid traffic for masq-enabled zones Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ucode: update to latest Git HEADJo-Philipp Wich2022-12-061-3/+3
| | | | | | | | | | | | | | | | | 46d93c9 tests: fixup testcases 4c654df types: adjust double printing format eac2add compiler: fix bytecode for logical assignments of properties 3903b18 fs: add `realpath()` function 8366102 math: add isnan() function eef83d3 tests: relax sleep() test 394e901 lib: uc_json(): accept trailing whitespace when parsing strings 1867c8b uloop: terminate parent uloop in task child processes d2cc003 uci: auto-load package in `ctx.foreach()` and `ctx.get_first()` 6c5ee53 compiler: ensure that arrow functions with block bodies return no value fdc9b6a compiler: fix `??=`, `||=` and `&&=` logical assignment semantics 88dcca7 add cmake to install requires for debian Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: mt7621: enable lzma-loader for netis WF2881Joonhyuk Song2022-12-061-1/+2
| | | | | | Fixes boot loader LZMA decompression issues (LZMA ERROR 1) Signed-off-by: Joonhyuk Song <thenoface303@gmail.com>
* ramips: mt7621: mikrotik 760igs (hEX S) fix SFPJohn Thomson2022-12-061-0/+1
| | | | | | | | | | | | | This device uses an AR8031/AR8033 chip to convert SoC gmac1 RGMII to 1000base-x or sgmii for the SFP fibre cage. The SFP cage requires phy-mode rgmii-rxid, and without it will not recieve any packets: ethtool -S sfp rx_fcs_errors will increase when packets should be being received, but no other _rx counters will change. Fixes: c77858aa792 ("ramips: mt7621-dts: change phy-mode of gmac1 to rgmii") Reviewed-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* mediatek: mt7623: build mt6577_auxadc driver into kernelDaniel Golle2022-12-052-1/+3
| | | | | | | | | Set CONFIG_MT6577_AUXADC=y as otherwise reading temperature of the thermal-zone doesn't work on MT7623 (it does work fine without this driver on MT7622 and MT7986). Fixes: f2ae4e2f8c ("mediatek: clean up platform kernel modules") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* trusted-firmware-a.mk: fix build with binutils 2.39Daniel Golle2022-12-051-0/+1
| | | | | | | | | Starting from version 2.39 binutils now warns about sections with rwx permissions. While this is generally desirable it breaks building ARM TrustedFirmware-A bl2 which treats warnings as errors. Disable the warning/error for now to fix build. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: use ARTIFACTS for initramfs-factory of I-O DATA WN-AX1167GRINAGAKI Hiroshi2022-12-051-19/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use ARTIFACTS to generate initramfs-based factory image of I-O DATA WN-AX1167GR instead of redundant recipe which generate on KERNEL_INITRAMFS. Note: WN-AX1167GR has 2x OS images on stock firmware. stock log: flash manufacture id: c2, device id 20 18 MX25L12805D(c2 2018c220) (16384 Kbytes) mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 Creating 10 MTD partitions on "raspi": 0x000000000000-0x000001000000 : "ALL" 0x000000000000-0x000000030000 : "Bootloader" 0x000000030000-0x000000040000 : "Config " 0x000000040000-0x000000050000 : "Factory" 0x000000050000-0x000000060000 : "iNIC_rf" 0x000000060000-0x0000007e0000 : "Kernel" 0x000000800000-0x000000f80000 : "app" 0x000000f90000-0x000000fa0000 : "Key" 0x000000fa0000-0x000000fb0000 : "backup" 0x000000fb0000-0x000001000000 : "storage" 1st image is "Kernel" and 2nd is "app" when booted from 1st image. In OpenWrt, those 2x partitions are combined to "firmware" with undefined (empty) areas (0x7e0000-0x7fffff, 0xf80000-0xf8ffff). The size of an OS image partition is 0x780000 (7680 KiB = 7.5 MiB), so check-size for initramfs-factory image needs to be called with the size. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* build: make sure that $(STAGING_DIR_IMAGE) existsDaniel Golle2022-12-051-0/+1
| | | | | | | Call 'mkdir -p $(STAGING_DIR_IMAGE)' before trying to store files in this potentially non-existing folder. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* CI: trigger check also on build and check-kernel-patches workflow changeChristian Marangi2022-12-042-0/+6
| | | | | | | | | Since kernel and packages workflow now use a shared build workflow, they also need to react on changes on these shared workflow. Fix this and add these shared workflow to the event paths to check. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: build: fix matching for openwrt release branch for toolchain parsingChristian Marangi2022-12-041-6/+8
| | | | | | | | | | | | | The current match logic doesn't handle test for push events related to stable release (example openwrt-22.03) but only fork with the related prefix (example openwrt-22.03-fixup) Fix wrong matching and while at it also add extra checks to other matching (check if the branch name actually start with the requested prefix) Fixes: e24a1e6f6d7f ("CI: build: add support for external toolchains from stable branch") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: fix matching for openwrt release branch for container selectionChristian Marangi2022-12-042-8/+12
| | | | | | | | | | | | | The current match logic doesn't handle test for push events related to stable release (example openwrt-22.03) but only fork with the related prefix (example openwrt-22.03-fixup) Fix wrong matching and while at it also add extra checks to other matching (check if the branch name actually start with the requested prefix) Fixes: abe8a4824210 ("CI: build: add support for per branch tools container") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: build: add support to fallback to sdk for external toolchainChristian Marangi2022-12-041-8/+33
| | | | | | | Add support to use sdk as external toolchain if the packaged external toolchain tar is not found on openwrt servers for build shared workflow. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: build: add support for external toolchains from stable branchChristian Marangi2022-12-041-2/+27
| | | | | | | | | | | | | Add support to use external toolchains from stable branch if we are testing commit targeting stable openwrt branch in kernel and packages workflow. With pr the target branch is parsed and the right toolchain is used. To use the stable toolchain for local testing the branch needs to have the prefix openwrt-[0-9][0-9].[0-9][0-9]- (example openwrt-21.02-fixup) Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-25 16:26:52 +0000