aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* bcm53xx: disable building Linksys EA6300 V1 imageRafał Miłecki2017-01-251-1/+2
| | | | | | | This device has 2 TRX partitions (main one and failsafe one) and Linux may not detect them properly failing to run userspace. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: update the ethernet compat stringJohn Crispin2017-01-255-6/+6
| | | | | | | mt2701 is an earlier version of the ip core, so use that compat string as baseline. Signed-off-by: John Crispin <john@phrozen.org>
* uboot-lantiq: mark SPL variants as brokenMathias Kresin2017-01-251-0/+5
| | | | | | | | | | | | | | | | | All SPL variants are lzo compressed. The lzop binary is used for compression but is not available in tools. Additionally at least the NAND SPL support is broken and doesn't create working bootloaders. The fb3370 SPI NOR SPL enabled u-boot isn't required for LEDE since the LEDE images are targeting the pre-installed EVA bootloader. Mark these u-boot variants as well as the SPL variants for the reference boards as broken till the lzma issues are fixed upstream and we can use lzma instead of lzo compression. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: fix a tool portability issueFelix Fietkau2017-01-251-3/+3
| | | | | | Use the standard off_t type instead of loff_t Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: fix sysupgrades on disks with 4k block sizeFelix Fietkau2017-01-251-9/+2
| | | | | | | Even when the disk uses 4k blocks, the partition table still uses units of 512 byte sectors. Always use ibs=512 for the offsets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Fix mikrotik subtarget default profile for device profile selectionAlex Samorukov2017-01-251-0/+1
| | | | Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
* ar71xx: improve Mikrotik hAP Lite device supportAlex Samorukov2017-01-253-4/+5
| | | | | | | | - remove CONFIG_MTD_SPI_NOR_USE_4K_SECTORS - enable jffs2 support - fix sysupgrade Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
* tools: update kernel2minor to 0.24 versionSergey Sergeev2017-01-254-61/+4
| | | | Signed-off-by: Sergey Sergeev <adron@yapic.net>
* mxs: fix image build issuesFelix Fietkau2017-01-252-5/+9
| | | | | | | stage u-boot images in KERNEL_BUILD_DIR for building images always select uboot-mxs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* u-boot.mk: add support for overriding DEFAULTFelix Fietkau2017-01-251-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* u-boot.mk: add UBOOT_MAKE_FLAGS variable similar to MAKE_FLAGSFelix Fietkau2017-01-251-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm47xx: backport arch patch with Luxul devices supportRafał Miłecki2017-01-242-14/+260
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* package-ipkg: Do not fail build without base-filesFlorian Fainelli2017-01-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | If the base-files package is not selected, we will fail executing the very first postinst script: make[3]: Leaving directory `/local/users/fainelli/openwrt/trunk' cp -fpR /local/users/fainelli/openwrt/trunk/build_dir/target-arm_xscale_musl-1.1.15_eabi/root-orion /local/users/fainelli/openwrt/trunk/build_dir/target-arm_xscale_musl-1.1.15_eabi/root.orig-orion ./usr/lib/opkg/info/busybox.postinst: line 3: /local/users/fainelli/openwrt/trunk/build_dir/target-arm_xscale_musl-1.1.15_eabi/root-orion/lib/functions.sh: No such file or directory ./usr/lib/opkg/info/busybox.postinst: line 4: default_postinst: command not found postinst script ./usr/lib/opkg/info/busybox.postinst has failed with exit code 127 make[2]: *** [package/install] Error 1 Check for the existence of lib/functions.sh, and if it does not exist, just bail out gracefully. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* base-files: fix user creation on sysupgrade with few opkg control filesMatthias Schiffer2017-01-241-1/+1
| | | | | | | | | | | If only a single opkg control file exists (which can happen with CONFIG_CLEAN_IPKG), grep would not print the file name by default. Instead of forcing it using -H, we just switch to -l (print only file names) and get rid of the cut. Add -s to suppress an error message when no control files exist. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/rootfs.mk: keep Require-User lines with CONFIG_CLEAN_IPKGMatthias Schiffer2017-01-241-1/+9
| | | | | | | | Require-User is handled by /etc/uci-defaults/13_fix_group_user on first boot, so we need to keep these when removing all opkg data with CONFIG_CLEAN_IPKG. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: brcmfmac: don't use uninitialize mem for country codesRafał Miłecki2017-01-241-2/+2
| | | | | | | There was a bug in brcmfmac patch that could result in treating random memory as source of country codes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Add back the commit "ath9k: Add airtime fairness scheduler"Felix Fietkau2017-01-249-15/+728
| | | | | | | | | This reverts commit c296ba834db4ce8c71e0ad7030aab188fe60b27b. According to several reports, the issues with the airtime fairness changes are gone in current versions. It's time to re-apply the patch now. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kirkwood: add ZyXEL NSA310bAlberto Bursi2017-01-249-13/+271
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL NSA310 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - Gigabit ethernet: Realtek (over pcie) - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II port (1 internal and 1 external) - 2 USB 2.0 ports (1 front and 1 back) - Smart fan The stock u-boot cannot read ubi so it should be replaced with the LEDE/OpenWRT's u-boot or with a u-boot from here https://github.com/mibodhi/u-boot-kirkwood This device's boot ROM supports "kwboot" tool (in mainline u-boot, built automatically if CONFIG_KIRKWOOD is declared) that sends an uboot image to the board over serial connection, it is very easy to unbrick. The stock bootloader can use usb and read from FAT filesystems, so the installation process is simple, place the uboot file on a USB flashdrive formatted as FAT (here it is "openwrt-kirkwood-nsa310.bin", then connect TTL to the board and write the following commands in the bootloader console: usb reset fatload usb 0 0x1000000 openwrt-kirkwood-nsa310.bin nand write 0x1000000 0x00000 0x100000 reset Now you are rebooting in the new u-boot, write this in its console to install the firmware: usb reset fatload usb 0 0x2000000 lede-kirkwood-nsa310b-squashfs-factory.bin nand erase.part ubi nand write 0x2000000 ubi 0x600000 If your firmware file is bigger than 6 MiBs you should write its size in hex instead of 0x600000 above, or remove that number entirely (it will take a while in this case). If you are using another uboot that can read ubi, set mtdparts like this mtdparts=mtdparts=orion_nand:0x00c0000(uboot),0x80000(uboot_env),0x7ec0000(ubi) And set your bootcmd to be like this bootcmd=run setenv bootargs; ubi part ubi; ubi read 0x800000 kernel; bootm 0x800000 Then you can install the firmware as described above. After you installed (or configured) the u-boot for booting the firmware, write the device's mac address in the ethaddr u-boot env. The MAC address is usually on a sticker under the device (one of the two codes is the serial), it should begin with "107BEF" as it is assigned to ZyXEL. write in the u-boot console (use your MAC address instead of the example) setenv ethaddr 10:7B:EF:00:00:00 saveenv to save the mac address in the u-boot. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uboot-envtools: add nsa310b envsAlberto Bursi2017-01-241-0/+1
| | | | | | | accessing the u-boot's envs on this device is required to read the mac address. These are the envs of the new u-boot, not of the stock one. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* mvebu: set fan_ctrl.sh only on mambaHans Geiblinger2017-01-242-1/+23
| | | | | Signed-off-by: Hans Geiblinger <cybrnook2002yahoo.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
* uboot-zynq: switch to u-boot.mkFelix Fietkau2017-01-241-98/+17
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-sunxi: clean up, switch to u-boot.mkFelix Fietkau2017-01-244-107/+124
| | | | | | | | Instead of referencing u-boot packages from device profiles and having a -all metapackage, make the u-boot packages hidden (they don't install to bin/ anyway), and name the files in KERNEL_BUILD_DIR appropriately Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-pxa: remove packageFelix Fietkau2017-01-242-104/+0
| | | | | | support for pxa has been gone for a long time now Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-oxnas: switch to u-boot.mkFelix Fietkau2017-01-2429-76/+10
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-omap: switch to u-boot.mkFelix Fietkau2017-01-241-75/+16
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-mxs: switch to u-boot.mkFelix Fietkau2017-01-241-66/+10
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-mvebu: switch to u-boot.mkFelix Fietkau2017-01-244-84/+14
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-layerscape-32b: simplify the package, it does not build anythingFelix Fietkau2017-01-241-64/+16
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-layerscape: switch to u-boot.mkFelix Fietkau2017-01-241-69/+22
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-imx6: switch to u-boot.mkFelix Fietkau2017-01-241-88/+29
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-at91: switch to u-boot.mkFelix Fietkau2017-01-241-71/+11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-kirkwood: switch to u-boot.mkFelix Fietkau2017-01-241-78/+38
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-ar71xx: switch to using u-boot.mkFelix Fietkau2017-01-2416-82/+19
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: switch to using u-boot.mkFelix Fietkau2017-01-241-259/+209
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add generic build template for u-boot packagesFelix Fietkau2017-01-241-0/+96
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-kirkwood: add uboot for nsa310bAlberto Bursi2017-01-243-9/+745
| | | | | | | | | | | | this commit allows to make a standalone u-boot for nsa310b. While both first-stage and second-stage u-boot work fine if installed to flash or loaded with kwboot, I could not get stock u-boot nor bodhi's u-boot to chainload any second stage u-boot (I also tried with dockstar's uboot that works fine on this device if loaded with kwboot). Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* sdk: explicitely remove ccache directories when packing SDKJo-Philipp Wich2017-01-241-0/+6
| | | | | | | | | | Upon first invocation, the ccache program will create the required directory hierarchy so there is no point in shipping these empty directories. Removing those paths also avoids shipping dangling symlinks in case the directories got linked elsewhere, e.g. into a shared global cache. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: make the touch .autoremove call non-fatalFelix Fietkau2017-01-241-1/+1
| | | | | | | Fixes build issues when there is nothing to do on the compile step (e.g. with unselected packages). Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: remove CPU_TYPE:=mips32r2, it gets overwritten anywayFelix Fietkau2017-01-241-2/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: unify CPU_TYPE for legacy and geodeFelix Fietkau2017-01-242-5/+2
| | | | | | | | | | According to some reports, -march=pentium-mmx is a better choice for older Geode CPUs than -march=geode anyway. Bump the minimum architecture of the legacy target from i486 to pentium-mmx. Anything older is not worth supporting anyway. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uml: mark as source-onlyFelix Fietkau2017-01-241-1/+1
| | | | | | Get rid of a special case in the buildbot script Signed-off-by: Felix Fietkau <nbd@nbd.name>
* malta: mark as source-only to avoid wasting build resourcesFelix Fietkau2017-01-241-1/+1
| | | | | | | | The le64 and be64 subtargets do not share a package architecture with any other targets, so they are pretty wasteful for a development-only target. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* malta: move FEATURES to the target makefileFelix Fietkau2017-01-245-4/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: remove mips16 feature flag from target makefilesFelix Fietkau2017-01-2410-9/+11
| | | | | | | It can be implicitly derived from the MIPS32 revision support in the kernel configuration Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: remove obsolete mips32r2 CPU_TYPEFelix Fietkau2017-01-241-1/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips/rt288x: switch CPU_TYPE to 24kcFelix Fietkau2017-01-241-1/+1
| | | | | | | | | | | While rt288x only has a MIPS 4KEc processor, it implements the MIPS32r2 architecture just like the 24Kc, so the instruction set should be 100% compatible. Switching it to 24kc allows it to share the package architecture with a lot of other targets instead of creating a special case, saving buildbot resources. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* odhcpd: update to git HEAD versionHans Dedecker2017-01-241-3/+3
| | | | | | e447ff9 router: fix compile issue on 64 bit systems Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* packages: mark packages depending on a target as nonsharedMathias Kresin2017-01-248-0/+16
| | | | | | | | | The packages can't be build as shared packages due to the unmet dependencies. Fixes FS#418. Signed-off-by: Mathias Kresin <dev@kresin.me>
* x86: drop ep80579-driversMathias Kresin2017-01-2429-13884/+0
| | | | | | | | The subtarget on which the driver still depends was removed with dee8986b95dcc200550faebe49c143e5d2357c60 because it was unmaintained for a long time. Signed-off-by: Mathias Kresin <dev@kresin.me>
* build: do not auto-clean packages where the autoremove step has not runFelix Fietkau2017-01-231-2/+5
| | | | | | | This avoids repeatedly unpacking and rebuilding packages that are failing the build. Re-running the failing step should be much faster. Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 23:08:19 +0000