aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: generic: use chosen bootconf in FIT partition parserDaniel Golle2022-03-211-4/+13
| | | | | | | | | If the selected boot configuration is stored by U-Boot in '/chosen' node as 'bootconf' attribute, use that configuration to resolve the block device used as rootfs. Fall back to use the default configuration in case 'bootconf' is not present. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add patch to allow accessing bootconf from LinuxDaniel Golle2022-03-211-0/+60
| | | | | | | | Store selected boot configuration in '/chosen' node in device tree, so it can be accessed by Linux (and used for fine-tuning the FIT partition parser). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: cortexa7: fix ethernet link detection on a20-olinuxino-lime2Petr Štetiar2022-03-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | a20-olinuxino-lime2 is currently having hard time with link detection of certain 1000Mbit partners due to usage of generic PHY driver, probably due to following missing workaround introduced in upstream in commit 3aed3e2a143c ("net: phy: micrel: add Asym Pause workaround"): The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric Pause capability is set. This issue is described in a Silicon Errata (DS80000691D or DS80000692D), which advises to always disable the capability. This patch implements the workaround by defining a KSZ9031 specific get_feature callback to force the Asymmetric Pause capability bit to be cleared. This fixes issues where the link would not come up at boot time, or when the Asym Pause bit was set later on. As a20-olinuxino-lime2 has Micrel KSZ9031RNXCC-TR Gigabit PHY since revision H, so we need to use Micrel PHY driver on those devices. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-envtools: oxnas: fix wrong eraseblock size for shuttle,kd20Daniel Golle2022-03-211-1/+1
| | | | | | | | Shuttle KD20 has NAND flash with 0x20000 (128KiB) erase blocks. Correctly set that in uboot-envtools as well to allow writing to the bootloader environment using fw_setenv. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips/mediatek: enable threaded NAPI in the ethernet driverFelix Fietkau2022-03-212-1/+42
| | | | | | Improves performance, especially under load Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: update to the latest versionFelix Fietkau2022-03-211-3/+3
| | | | | | | | | | | | | | | 391a9fbd5ace dns: fix parsing vlan encapsulated protocol 6aeeddbc91ad interface: extend dns filters to cover vlan tagged traffic as well 1ab53d4ca601 bpf: return TC_ACT_UNSPEC to allow other filters to proceed ca21e729af23 interface: switch to using clsact for filters 5d158f6b3c15 interface: run ingress bpf filter on main device ingress instead of ifb egress bdfcb11847ce interface: fix duplicated dns filter line b97405aa632a Revert "ubus: remove dnsmasq subscriber" 8fbaf39dbc95 interface: rework adding/removing filters, do not delete clsact d7ba5804eae4 interface: replace open-coded ifb-dns string with QOSIFY_DNS_IFNAME 91cf440db9e2 loader: fix use of deprecated functions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: Fix patch headerMarek Behún2022-03-211-1/+1
| | | | | | | | | | Remove "a" character from the first line of patch 738-v5.14-01-net-dsa-qca8k-fix-an-endian-bug-in-qca8k-get-ethtool.patch Otherwise `git am` fails to apply this patch which is annoying when trying to do some development / rebasing. Signed-off-by: Marek Behún <kabel@kernel.org>
* uboot-mvebu: backport patch to fix eMMCRobert Marko2022-03-211-0/+64
| | | | | | | | | | v2022.01 has a regression that broke eMMC usage on most if not all Armada SoC-s, thus breaking boards like uDPU which use eMMC for storage. Fix it by backporting a recent upstream patch. Fixes: 782d4c8306c8 ("uboot-mvebu: update to version 2022.01") Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* mvebu: udpu: include LM75 kmod by defaultRobert Marko2022-03-211-1/+1
| | | | | | | uDPU has 2 LM75 compatible temperature sensors, so include the driver for them by default in order to utilize them. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* mvebu: udpu: fix initramfs bootingRobert Marko2022-03-211-1/+1
| | | | | | | | | | uDPU provides a FIT based initramfs, but currently gets stuck after U-boot starts the kernel at "Starting kernel..". It is due to the load address being too low, so increase it in order to get the initramfs booting again. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ltq-vdsl-mei: add locking to interrupt handlerJan Hoffmann2022-03-212-1/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some users noticed repeated resyncs at random intervals, which go away when the MEI driver is configured to use polling instead of interrupts. Debugging shows that this seems to be caused by concurrent calls to MEI_ReadMailbox (in the interrupt handler) and MEI_WriteMailbox. This appears to be mostly triggered when there is an interrupt for vectoring error reports. In polling mode, calls to MEI_ReadMailbox are protected by the same semaphore as is used in MEI_WriteMailbox. When interrupts are used, MEI_WriteMailbox appears to rely on MEI_DisableDeviceInt and MEI_EnableDeviceInt to provide mutual exclusion with the interrupt handler. These functions mask/unmask interrupts, and there is an additional check of the mask in the interrupt handler itself. However, this is not sufficient on systems with SMP, as the interrupt handler may be running in parallel, and could already be past the interrupt mask check at this point. This adds a lock to the interrupt handler, and also acquires this lock in MEI_DisableDeviceInt. This should make sure that after a call to MEI_DisableDeviceInt the interrupt is masked, and the interrupt handler is either not running, has alread finished its work, or is still before the interrupt mask check, and is thus going to detect the change. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* ltq-vdsl-app: set MAC address for vectoring error reportsJan Hoffmann2022-03-211-6/+14
| | | | | | | | | | | | This tells the modem about the WAN MAC address, which is used as source address for vectoring error reports that are generated by the firmware. It needs to be set early, as the MEI driver only actually writes the value to the modem when is in reset state (i.e. the firmware has been loaded, but connection has not started yet). Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* ltq-vdsl-mei: enable vectoring error sample callbackJan Hoffmann2022-03-212-13/+2
| | | | | | | | This re-enables the vectoring error sample callback and adds a dependency to the corresponding driver. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* ltq-vectoring: add driverJan Hoffmann2022-03-214-0/+349
| | | | | | | | | | | | | | | | | | | | | | | | In order to calculate the required pre-distortion for downstream vectoring, the vectoring control entity (VCE) at the carrier office needs error samples from the modem. On Lantiq VR9 modems, error reports are generated by the firmware, but need to be multiplexed into the data stream by the driver on the main processor when L2 encapsulation is selected by the VCE. This driver provides the necessary callback function, which is called by the MEI driver after receiving an error report from the firmware. Originally, it is part of the Lantiq PPA driver, but after a few changes it also works with the PTM driver used in OpenWrt. The direct call to ndo_start_xmit needs to be replaced, as the PTM driver relies on locks from the kernel. Instead dev_queue_xmit is used, which is called from a work queue, as it is not safe to call from an interrupt handler. Additional changes include fixes to support recent kernel versions and a change of the used interface from ptm0 to dsl0. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* kernel: delete Linux 5.4 config and patchesDaniel Golle2022-03-211709-477715/+0
| | | | | | | | As the upcoming release will be based on Linux 5.10 only, remove all kernel configuration as well as patches for Linux 5.4. There were no targets still actively using Linux 5.4. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: Add support for Xiaomi Redmi Router AX6SRichard Huynh2022-03-206-2/+396
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also known as the "Xiaomi Router AX3200" in western markets, but only the AX6S is widely installation-capable at this time. SoC: MediaTek MT7622B RAM: DDR3 256 MiB (ESMT M15T2G16128A) Flash: SPI-NAND 128 MiB (ESMT F50L1G41LB or Gigadevice GD5F1GQ5xExxG) WLAN: 2.4/5 GHz 4T4R 2.4 GHz: MediaTek MT7622B 5 GHz: MediaTek MT7915E Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531B LEDs/Keys: 2/2 (Internet + System LED, Mesh button + Reset pin) UART: Marked J1 on board VCC RX GND TX, beginning from "1". 3.3v, 115200n8 Power: 12 VDC, 1.5 A Notes: U-Boot passes through the ethaddr from uboot-env partition, but also has been known to reset it to a generic mac address hardcoded in the bootloader. However, bdata is also populated with the ethernet mac addresses, but is also typically never written to. Thus this is used instead. Installation: 1. Flash stock Xiaomi "closed beta" image labelled 'miwifi_rb03_firmware_stable_1.2.7_closedbeta.bin'. (MD5: 5eedf1632ac97bb5a6bb072c08603ed7) 2. Calculate telnet password from serial number and login 3. Execute commands to prepare device nvram set ssh_en=1 nvram set uart_en=1 nvram set boot_wait=on nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit 4. Download and flash image On computer: python -m http.server On router: cd /tmp wget http://<IP>:8000/factory.bin mtd -r write factory.bin firmware Device should reboot at this point. Reverting to stock: Stock Xiaomi recovery tftp that accepts their signed images, with default ips of 192.168.31.1 + 192.168.31.100. Stock image should be renamed to tftp server ip in hex (Eg. C0A81F64.img) Triggered by holding reset pin on powerup. A simple implementation of this would be via dnsmasq's dhcp-boot option or using the vendor's (Windows only) recovery tool available on their website. Signed-off-by: Richard Huynh <voxlympha@gmail.com>
* mediatek: Add GD5F1GQ5xExxG to mtk-snandRichard Huynh2022-03-201-0/+4
| | | | | | Some units of the Xiaomi Redmi Router AX6S/Xiaomi Router AX3200 contain this part. Signed-off-by: Richard Huynh <voxlympha@gmail.com>
* ipq40xx: add support for Telco X1 ProNicholas Smith2022-03-195-2/+347
| | | | | | | | | | | | | | | | | | | | | | | | | | | Telco X1 Pro is a Cat12 LTE-A Pro modem router. Vendor firmware is based on a recent version of OpenWrt. Flashing is possible via CLI using sysupgrade -F -n The serial headers allow bootloader and console access Serial setting: 115200 8N1 Brief Specifications: IPQ4019 SoC 32MB flash 512MB RAM 4x gigabit LAN 1x gigabit WAN Dual-band Wave-2 wifi 2x SMA LTE antenna connectors 2x RP-SMA wifi antennas 1x USB 2.0 port 1x Reset button Serial headers installed 1x Nano SIM tray 1x Quectel EM-12G LTE-A Pro modem 1x M.2 slot attached to USB 3.0 1x internal micro SD card slot Signed-off-by: Nicholas Smith <nicholas@nbembedded.com>
* ramips: add support for D-Link DIR-878 R1Igor Nazarov2022-03-192-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: - SoC: MediaTek MT7621AT - RAM: 128 MB (DDR3) - Flash: 16 MB (SPI NOR) - WiFi: MT7615N (2.4GHz) and MT7615N (5Ghz) - Switch: 1 WAN, 4 LAN (Gigabit) - Buttons: Reset, WiFi Toggle, WPS - LEDs: Power, Internet, WiFi 2.4G WiFi 5G The R1 revision is identical to the A1 revision except - No Config2 Parition, therefore - factory partition resized to 64k from 128K - Firmware partition offset is 0x50000 not 0x60000 - Firmware partitions size increased by 64K - Firmware partition type is "denx,uimage", not "sge,uimage" - Padding of image creation "uimage-padhdr 96" removed Installation: Update to the last D-Link firmware through web-ui before OpenWRT installation then follow the instructions to patch your device using D-Link FailsafeUI. - D-Link FailsafeUI: Power down the router, press and hold the reset button, then re-plug it. Keep the reset button pressed until the internet LED stops flashing, then jack into any lan port and manually assign a static IP address in 192.168.0.0/24 other than 192.168.0.1 (e.g. 192.168.0.2) and go to http://192.168.0.1 Flash with the factory image. Signed-off-by: Igor Nazarov <tigron.dev@gmail.com>
* kernel: bump 5.10 to 5.10.107John Audia2022-03-195-12/+5
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* ncurses: update to 6.3Huangbin Zhan2022-03-196-37/+37
| | | | | | release notes: https://invisible-island.net/ncurses/announce-6.3.html Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
* ramips: add support for Beeline SmartBox FlashMikhail Zhilkin2022-03-197-0/+253
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Beeline SmartBox Flash is a wireless AC1300 (WiFi 5) router manufactured by Arcadyan company. Device specification -------------------- SoC Type: MediaTek MT7621AT RAM: 256 MiB, Winbond W632GU6NB Flash: 128 MiB (NAND), Winbond W29N01HVSINF Wireless 2.4 GHz (MT7615DN): b/g/n, 2x2 Wireless 5 GHz (MT7615DN): a/n/ac, 2x2 Ethernet: 3xGbE (WAN, LAN1, LAN2) USB ports: 1xUSB3.0 Button: 1 (Reset/WPS) LEDs: 1 RGB LED Power: 12 VDC, 1.5 A Connector type: Barrel Bootloader: U-Boot (Ralink UBoot Version: 5.0.0.2) OEM: Arcadyan WE42022 Installation ------------ 1. Place *factory.trx on any web server (192.168.1.2 in this example) 2. Connect to the router using telnet shell (no password required) 3. Save MAC adresses to U-Boot environment: uboot_env --set --name eth2macaddr --value $(ifconfig | grep eth2 | \ awk '{print $5}') uboot_env --set --name eth3macaddr --value $(ifconfig | grep eth3 | \ awk '{print $5}') uboot_env --set --name ra0macaddr --value $(ifconfig | grep ra0 | \ awk '{print $5}') uboot_env --set --name rax0macaddr --value $(ifconfig | grep rax0 | \ awk '{print $5}') 4. Ensure that MACs were saved correctly: uboot_env --get --name eth2macaddr uboot_env --get --name eth3macaddr uboot_env --get --name ra0macaddr uboot_env --get --name rax0macaddr 5. Download and write the OpenWrt images: cd /tmp wget http://192.168.1.2/factory.trx mtd_write erase /dev/mtd4 mtd_write write factory.trx /dev/mtd4 6. Set 1st boot partition and reboot: uboot_env --set --name bootpartition --value 0 reboot Back to Stock ------------- 1. Run in the OpenWrt shell: fw_setenv bootpartition 1 reboot 2. Optional step. Upgrade the stock firmware with any version to overwrite the OpenWrt in Slot 1. MAC addresses ------------- +-----------+-------------------+----------------+ | Interface | MAC | Source | +-----------+-------------------+----------------+ | label | 30:xx:xx:51:xx:09 | No MACs was | | LAN | 30:xx:xx:51:xx:09 | found on Flash | | WAN | 30:xx:xx:51:xx:06 | [1] | | WLAN_2g | 30:xx:xx:51:xx:07 | | | WLAN_5g | 32:xx:xx:41:xx:07 | | +-----------+-------------------+----------------+ [1]: a. Label wasb't found neither in factory nor in other places. b. MAC addresses are stored in encrypted partition "glbcfg". Encryption key hasn't known yet. To ensure the correct MACs in OpenWrt, a hack with saving of the MACs to u-boot-env during the installation was applied. c. Default Ralink ethernet MAC address (00:0C:43:28:80:36) was found in "Factory" 0xfff0. It's the same for all Smartbox Flash devices. OEM firmware also uses this MAC when initialazes ethernet driver. In OpenWrt we use it only as internal GMAC (eth0), all other MACs are unique. Therefore, there is no any barriers to the operation of several Smartbox Flash devices even within the same broadcast domain. Stock firmware image format --------------------------- +--------------+---------------+----------------------------------------+ | Offset | 1.0.15 | Description | +==============+===============+========================================+ | 0x0 | 5d 43 6f 74 | TRX magic "]Cot" | +--------------+---------------+----------------------------------------+ | 0x4 | 00 70 ff 00 | Length (reverse) | +--------------+---------------+----------------------------------------+ | | | htonl(~crc) from 0xc ("flag_version") | | 0x8 | 72 b3 93 16 | to "Length" | +--------------+---------------+----------------------------------------+ | 0xc | 00 00 01 00 | Flags | +--------------+---------------+----------------------------------------+ | | | Offset (reverse) of Kernel partition | | 0x10 | 1c 00 00 00 | from the start of the header | +--------------+---------------+----------------------------------------+ | | | Offset (reverse) of RootFS partition | | 0x14 | 00 00 42 00 | from the start of the header | +--------------+---------------+----------------------------------------+ | 0x18 | 00 00 00 00 | Zeroes | +--------------+---------------+----------------------------------------+ | 0x1c | 27 05 19 56 … | Kernel data + zero padding | +--------------+---------------+----------------------------------------+ | | | RootFS data (starting with "hsqs") + | | 0x420000 | 68 73 71 73 … | zero padding to "Length" | +--------------+---------------+----------------------------------------+ | | | Some signature data (format is | | | | unknown). Necessary for the fw | | "Lenght" | 00 00 00 00 … | update via oem fw web interface. | +--------------+---------------+----------------------------------------+ | "Lenght" + | | TRX magic "HDR0". U-Boot is | | 0x10c | 48 44 52 30 | checking it at every boot. | +--------------+---------------+----------------------------------------+ | | | 1.00: | | | | Zero padding to ("Lenght" + 0x23000) | | | | 1.0.12: | | | | Zero padding to ("Lenght" + 0x2a000) | | "Lenght" + | | 1.0.13, 1.0.15, 1.0.16: | | 0x110 | 00 00 00 00 | Zero padding to ("Lenght" + 0x10000) | +--------------+---------------+----------------------------------------+ Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* base-files: add wrapper for procd service list commandFlorian Eckert2022-03-191-0/+8
| | | | | | | | | | | | | | | | A service managed by procd does have a json object with usefull information. This information could by dumped with the following command. ubus call service list "{ 'verbose':true, 'name': '<service-name>)'". }" This line is long and complicated to enter. This commit adds a wrapper call to the procd service section tool to simplify the input and get the output faster. We could now enter the command /etc/initd/<service> info to get the info faster. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* procd: move service command to procdFlorian Eckert2022-03-193-21/+31
| | | | | | | | The service command belongs to the procd and does not belong in the shinit. In the course of the move, the script was also checked with shellcheck and cleaned up. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* kernel: bump 5.10 to 5.10.106John Audia2022-03-1921-59/+49
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.105John Audia2022-03-194-19/+22
| | | | | | | | | | | | | | | Updated default config with new sym (CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y). Manually rebased: generic/hack-5.10/220-arm-gc_sections.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* iptables: bump PKG_RELEASEEtienne Champetier2022-03-191-1/+1
| | | | | | Following {arp,eb}tables-nft addition, bump PKG_RELEASE Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: add {arp,eb}tables-nftEtienne Champetier2022-03-192-0/+145
| | | | | | | Add a patch to add some missing init_extensions{a,b}() calls Package lib{arp,eb}t_*.so Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: add xtables-nft packageEtienne Champetier2022-03-191-3/+14
| | | | | | | This allows to install ip6tables-nft without iptables-nft This prepare the addition of {arp,eb}tables-nft Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: add xtables-legacy packageEtienne Champetier2022-03-191-3/+14
| | | | | | This allows to install ip6tables-legacy without iptables-legacy Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* ebtables: rename to ebtables-legacyEtienne Champetier2022-03-191-14/+21
| | | | | | | | This prepare the introduction of ebtables-nft. Add PROVIDES so dependencies are not broken, use ALTERNATIVES. Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* arptables: rename package to arptables-legacyEtienne Champetier2022-03-191-4/+7
| | | | | | | | This prepare the introduction of arptables-nft. Add PROVIDES so dependencies are not broken, use ALTERNATIVES. Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* quilt.mk: fix typo in the Host sectionRosen Penev2022-03-191-1/+1
| | | | | | | | HOST_PATCH_DIR is used for host patches, not PATCH_DIR. Fixes refreshing patches with a custom HOST_PATCH_DIR. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* cypress-firmware: update it to version 5.4.18-2021_0812Josef Schlehofer2022-03-191-38/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Binary files were renamed to cyfmac from brcmfmac, but the files needs to be on the router with the previous naming [ 6.656165] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.665182] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.bin failed with error -2 [ 6.674928] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.bin - Cypress were acquired by Infineon Technologies Thus change the project URL and switch to download files from their GitHub repository. This is much better than the previous solution, which requires finding new threads on their community forum about new driver updates, and it will be necessary to change the URL each time. Unfortunately, it seems that there is not published changelog, but according to this forum thread [1], be careful by opening the link from solution since it contains ending bracket ), it brings fixes for various security vulnerabilities, which were fixed in 7_45_234. Fixes: - FragAttacks - Kr00k Also add LICENSE file Run tested on Seeedstudio router powered by Raspberry Pi 4 CM with package cypress-firmware-43455-sdio. Before: root@OpenWrt:~# dmesg | grep 'Firmware: BCM4345/6' [ 6.895050] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:20:01 version 7.45.206 (r725000 CY) FWID 01-febaba43 After: root@OpenWrt:~# dmesg | grep 'Firmware: BCM4345/6' [ 6.829805] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 [1] https://community.infineon.com/t5/Wi-Fi-Bluetooth-for-Linux/Outdated-brcmfmac-firmware-for-Raspberry-Pi-4-in-OpenWrt-21-02-1/m-p/331593#M2269 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* bcm27xx: bcm2711: add kmod-usb-net-lan78xxJosef Schlehofer2022-03-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some vendors like Seeedstudio in their product [1] with Raspberry Pi Compute Module 4 uses Microchip LAN7800 (USB 3.0 to Gigabit Ethernet Bridge) - USB 3.0 extended from PCIe of CM4. lsusb output: ``` Bus 002 Device 002: ID 0424:7800 Microchip LAN7800 ``` Raspberry Pi 4 and even Compute Module 4 has many resources available and for just one kernel module it is not necessary to add additional specific CM4 profiles. Let's include it by default, so the both Ethernet ports will be usable to have better user-experience. Because previous generation of Raspberry Pi included LAN7800 Gigabit Ethernet by default and it is enabled there [2] in kernel without additional kernel module, which was added recently [3]. After this commit in dmesg can be found this: ``` root@OpenWrt:~# dmesg | grep lan [ 7.038889] lan78xx 2-3:1.0 (unnamed net_device) (uninitialized): int urb period 64 [ 7.090484] usbcore: registered new interface driver lan78xx ``` Tested and works with sysupgrade image. [1] https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html [2] https://github.com/openwrt/openwrt/blob/32c74552b2310531af593ee0f859a3935a3a7cbd/target/linux/bcm27xx/bcm2709/config-5.4#L437 [3] https://github.com/openwrt/openwrt/commit/31647d8be8c60bfb6690c87c739b8abe6dc03950 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* iwinfo: update to latest Git headJosef Schlehofer2022-03-191-3/+3
| | | | | | | | | Changelog: 90bfbb9 devices: Add Cypress CYW43455 234075b devices: fix AMD RZ608 format 0e2a318 devices: add AMD RZ608 device-id Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* bpftools: fix library path on 64 bit systemsFelix Fietkau2022-03-191-3/+3
| | | | | | | drop the use of LIB_SUFFIX Fixes: 00cbf6f6ab1d ("bpftools: update to standalone bpftools + libbpf, use the latest version") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bpftools: update to standalone bpftools + libbpf, use the latest versionFelix Fietkau2022-03-196-117/+64
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport MBSSID supportFelix Fietkau2022-03-185-7/+554
| | | | | | Required for an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: enable SERIAL_8250_16550A_VARIANTSStijn Tintel2022-03-181-1/+1
| | | | | | | | | | | | | | | | | | | Kernel 5.6 introduced a new config symbol SERIAL_8250_16550A_VARIANTS. In kernel 5.8, this symbol was changed to default to on on !x86, as some embedded devices still use 16650A variants. Let's play safe here and enable this symbol in the generic config, to avoid others from running into this problem and having to spend several hours trying to bisect this problem. While we could disable the symbol in the x86 target configs, a 20ms boot time reduction really isn't worth the time wasted on bisecting this issue. Matt discovered this problem while working on adding support for the WatchGuard Firebox M200 to the qoriq target, where it caused some characters to be missing on the console output. Reported-by: Matt Fawcett <mattytap@icloud.com> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ath79: improve support for GL.iNet GL-XE300Pascal Coudurier2022-03-173-1/+10
| | | | | | | | | | - fix eth0 eth1 sharing same mac so it conforms to the behavior stated in the original commit and the way it is in vendor firmware : WAN is label, LAN is label +1 and WLAN is label +2 - add default leds config - add default network config Signed-off-by: Pascal Coudurier <coudu@wanadoo.fr>
* mpc85xx: fix missing kernel config symbol and DTS whitespace issuePetr Štetiar2022-03-172-1/+2
| | | | | | | | | | | | | Buildbot has reported following issue while crunching mpc85xx/p1010 subtarget: Extreme Networks WS-AP3825i (WS_AP3825I) [N/y/?] (NEW) Fix it by disabling that config symbol in target kernel config and while at it fix DTS whitespace issue. Fixes: 7e614820a892 ("mpc85xx: add support for Extreme Networks WS-AP3825i") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* lantiq: fritz7362sl: add partition subnode for SPI flashJan Hoffmann2022-03-161-14/+20
| | | | | | | | | | | Without a partition subnode ofpart_core still parses direct subnodes as partitions, but it ignores nodes with a compatible property. Due to this, the switch to nvmem-cells made the urlader partition inaccessible. As a result, the wireless network was broken, as the calibration data is read from that partition by a script. Fixes: #8983 Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* lantiq: fritz7362sl: fix SPI flash node reg propertyMartin Blumenstingl2022-03-161-1/+1
| | | | | | | | | | | The &spi node has #address-cells = <1> and #size-cells = <0>. Drop the extra 0 in the reg property from the SPI flash node to ensure it's number of cells matches the definition in the parent node. This also makes the reg property for the SPI flash node consistent with all other VR9 boards. Fixes: eae6cac6a30b ("lantiq: add support for AVM FRITZ!Box 7362 SL") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ipq806x: fix TP-Link Archer VR2600v bootloopingChristian Lamparter2022-03-161-1/+2
| | | | | | | | | | | | | | | | Timo Schroeder reported: "The TP-Link Archer VR2600v is stuck in a boot loop on written snapshot image. It's able to boot using the snapshot uimage though, but there ath10k firmware can't be found. 21.02.2 release version doesn't have either problem." The VR2600v has a 512 byte header at the beginning of the firmware that needs to be accounted for. Fixes: f6a01d7f5c3d ("ipq806x: convert TP-Link Archer VR2600v to denx,uimage") Reported-by: Timo Schroeder <der.timosch@gmail.com> References: <https://github.com/openwrt/openwrt/issues/9467> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mpc85xx: add support for Extreme Networks WS-AP3825iMartin Kennedy2022-03-167-1/+407
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware: - SoC: Freescale P1020 - CPU: 2x e500v2 @ 800MHz - Flash: 64MiB NOR (1x Intel JS28F512) - Memory: 256MiB (2x ProMOS DDR3 V73CAG01168RBJ-I9H 1Gb) - WiFi1: 2.4+5GHz abgn 3x3 (Atheros AR9590) - Wifi2: 5GHz an+ac 3x3 (Qualcomm Atheros QCA9890) - ETH: 2x PoE Gigabit Ethernet (2x Atheros AR8035) - Power: 12V (center-positive barrel) or 48V PoE (active or passive) - Serial: Cisco-compatible RJ45 next to 12V power socket (115200 baud) - LED Driver: TI LV164A - LEDs: (not functioning) - 2x Power (Green + Orange) - 4x ETH (ETH1 + ETH2) x (Green + Orange) - 2x WiFi (WiFi2 + WiFi1) Installation: 1. Grab the OpenWrt initramfs <openwrt-initramfs-bin>, e.g. openwrt-mpc85xx-p1020-extreme-networks_ws-ap3825i-initramfs-kernel.bin. Place it in the root directory of a DHCP+TFTP server, e.g. OpenWrt `dnsmasq` with configuration `dhcp.server.enable_tftp='1'`. 2. Connect to the serial port and boot the AP with options e.g. 115200,N,8. Stop autoboot in U-Boot by pressing Enter after 'Scanning JFFS2 FS:' begins, then waiting for the prompt to be interrupted. Credentials are identical to the one in the APs interface. By default it is admin / new2day: if these do not work, follow the OEM's reset procedure using the reset button. 3. Set the bootcmd so the AP can boot OpenWrt by executing: ```uboot setenv boot_openwrt "cp.b 0xEC000000 0x2000000 0x2000000; interrupts off; bootm start 0x2000000; bootm loados; fdt resize; fdt boardsetup; fdt chosen; bootm prep; bootm go;" setenv bootcmd "run boot_openwrt" saveenv ``` If you plan on going back to the vendor firmware - the bootcmd for it is stored in the boot_flash variable. 4. Load the initramfs image to RAM and boot by executing ```uboot setenv ipaddr <ipv4 client address>; setenv serverip <tftp server address>; tftpboot 0x2000000 <openwrt-initramfs-bin>; interrupts off; bootm start 0x2000000; bootm loados; fdt resize; fdt boardsetup; fdt chosen; bootm prep; bootm go; ``` 5. Make a backup of the "firmware" partition if you ever wish to go back to the vendor firmware. 6. Upload the OpenWrt sysupgrade image via SCP to the devices /tmp folder. 7. Flash OpenWrt using sysupgrade. ```ash sysupgrade /tmp/<openwrt-sysupgrade-bin> ``` Notes: - We must step through the `bootm` process manually to avoid fdt relocation. To explain: the stock U-boot (and stock Linux) are configured with a very large CONFIG_SYS_BOOTMAPSZ (and the device's stock Linux kernel is configured to be able to handle it). The U-boot version predates the check for the `fdt_high` variable, meaning that upon fdt relocation, the fdt can (and will) be moved to a very high address; the default appears to be 0x9ffa000. This address is so high that when the Linux kernel starts reading the fdt at the beginning of the boot process, it encounters a memory access exception and panics[5]. While it is possible to reduce the highest address the fdt will be relocated to by setting `bootm_size`, this also has the side effect of limiting the amount of RAM the kernel can use[3]. - Because it is not relocated, the flattened device tree needs to be padded in the build process to guarantee that `fdt resize` has enough space. - The primary ethernet MAC address is stored (and set) in U-boot; they are shimmed into the device tree by 'fdt boardsetup' through the 'local-mac-address' property of the respective ethernet node, so OpenWrt does not need to set this at runtime. Note that U-boot indexes the ethernet nodes by alias, which is why the device tree explicitly aliases ethernet1 to enet2. - LEDs do not function under OpenWrt. Each of 8 LEDs is connected to an output of a TI LV164A shift register, which is wired to GPIO lines and operates through bit-banged SPI. Unfortunately, I am unable to get the spi-gpio driver to recognize the `led_spi` device tree node at all, as confirmed by patching in printk messages demonstrating spi-gpio.c::spi_gpio_probe never runs. It is possible to manually articulate the shift register by exporting the GPIO lines and stepping their values through the sysfs. - Though they do not function under OpenWrt, I have left the pinout details of the LEDs and shift register in the device tree to represent real hardware. - An archive of the u-boot and Linux source for the AP3825i (which is one device of a range of devices code-named 'CHANTRY') be found here[1]. - The device has an identical case to both the Enterasys WS-AP3725i and Adtran BSAP-2030[2] (and potentially other Adtran BSAPs). Given that there is no FCC ID for the board itself (only its WLAN modules), it's likely these are generic boards, and even that the WS-AP3725i is identical, with only a change in WLAN card. I have ordered one to confirm this. - For additional information: the process of porting the board is documented in an OpenWrt forum thread[4]. [1]: magnet:?xt=urn:btih:f5306a5dfd06d42319e4554565429f84dde96bbc [2]: https://forum.openwrt.org/t/support-for-adtran-bluesocket-bsap-2030/48538 [3]: https://forum.openwrt.org/t/adding-openwrt-support-for-ws-ap3825i/101168/29 [4]: https://forum.openwrt.org/t/adding-openwrt-support-for-ws-ap3825i/101168 [5]: https://forum.openwrt.org/t/adding-openwrt-support-for-ws-ap3825i/101168/26 Tested-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Martin Kennedy <hurricos@gmail.com>
* argp-standalone: fix compilation with Alpine LinuxRosen Penev2022-03-161-1/+3
| | | | | | This package is a C89 one. Add the proper CFLAG to fix compilation. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* base-files: Align rootfs_data upgrades to 64KiB on eMMCBrian Norris2022-03-161-1/+4
| | | | | | | | | | | Rootfs overlays get created at a ROOTDEV_OVERLAY_ALIGN (64KiB) alignment after the rootfs, but emmc_do_upgrade() is assuming it comes at the very next 512-byte sector. Suggested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> (move spaces around, mention fstools' libtoolfs) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* openssl: bump to 1.1.1nMartin Schiller2022-03-161-3/+3
| | | | | | | | | | | | | This is a bugfix release. Changelog: *) Fixed a bug in the BN_mod_sqrt() function that can cause it to loop forever for non-prime moduli. (CVE-2022-0778) *) Add ciphersuites based on DHE_PSK (RFC 4279) and ECDHE_PSK (RFC 5489) to the list of ciphersuites providing Perfect Forward Secrecy as required by SECLEVEL >= 3. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ramips: add support for Netgear WN3100RPv2Rodolphe de Saint Léger2022-03-166-155/+186
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Netgear WN3100RPv2 http://www.netgear.com/support/product/wn3100rpv2.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This device seems to be same hardware as a WN3000RPv3 Flash instructions: - Use the Netgear WebUI to upgrade to OpenWRT using the factory image (see note below), - Use the sysupgrade image for upgrading versions from OpenWRT, - TFTP recovery procedure can be used to flash the factory image (preferred method). Note: - The WebUI may not reboot automatically, wait at least 5 minutes before powercycling the device Flashing using TFTP: - Set you IP address to 192.168.1.10/24 (no gateway) - Connect your machine to the Ethernet port - Power off the device and wait for 10 seconds, - Hold the reset button and power on the device (do not release reset), - Hold the reset button until the green light is flashing (Approx. 15s) - launch tftp, set mode to binary and connect to 192.168.1.1 - put the factory firmware image - All leds will switch off (like a power off), this is normal - Wait for the device to reboot in the new OpenWRT image (max 5 mins) - The first boot will take longer than usual. - After boot, the Device IP on the ethernet port is 192.168.1.1 Signed-off-by: Rodolphe de Saint Léger <rdesaintleger@gmail.com> [drop unneeded includes in dts, wrap commit message] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 16:17:53 +0000