aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ksmbd: removeRosen Penev2023-05-182-84/+0
| | | | | | In tree ksmbd is available with 5.15 and is better updated. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* linux/modules: add ksmbd support for 5.15Rosen Penev2023-05-181-0/+37
| | | | | | | 5.15 is the first version to come with ksmbd. Use it instead of the module as the linux one is better maintained. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: modules: split smbfs-common from cifsJohn Thomson2023-05-181-3/+18
| | | | | | | | | This kernel config symbol is a shared library used for both CIFS and the in-tree SMB_SERVER. Split it out into kmod-fs-smbfs-common from kmod-fs-cifs, and depend on it, so that later in-tree ksmbd may also depend on it. Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* ramips: add basic common recipe for nand flash devicesShiji Yang2023-05-181-207/+47
| | | | | | | | These same codes are repeated for many devices now, it's better to move them to shared definition. This commit also add the missing KERNEL_SIZE of the ZyXEL NR7101 and ZyXEL LTE3301-PLUS. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: set default BLOCKSIZE to 64k for nor flash devicesShiji Yang2023-05-187-74/+2
| | | | | | | | | In kernel 5.15, the default erase sector size of the nor flash has been switched from 4k to 64k. This may cause the configuration not be preserved across upgrades. To avoid this issue, change the default BLOCKSIZE to 64k. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: enable variable sector size erasure for all subtargetShiji Yang2023-05-184-2/+4
| | | | | | | | | Make use of minor sector size (4k) on supported flash chips to improve spi read/write performance. Tested on ramips/mt7628: Motorola MWR03 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: add MODULE_ALLOW_BTF_MISMATCH optionTianling Shen2023-05-181-0/+10
| | | | | | | | | | | BTF mismatch can occur for a separately-built module even when the ABI is otherwise compatible and nothing else would prevent successfully loading. Add a new config to control how mismatches are handled. By default, preserve the current behavior of refusing to load the module. If MODULE_ALLOW_BTF_MISMATCH is enabled, load the module but ignore its BTF information. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* ipq-wifi: drop upstreamed board-2.binChristian Lamparter2023-05-183-63/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BDFs for the: Aruba AP-365 Devolo Magic 2 WiFi next Edgecore ECW5410 Edgecore OAP100 Extreme Networks WS-AP3915i GL.iNet GL-A1300 GL.iNet GL-AP1300 GL.iNet GL-S1300 Linksys EA8300 Linksys WHW03v2 Nokia Wi4A AC400i P&W R619AC Pakedge WR-1 Qxwlan E2600AC C1 Sony NCP-HG100/Cellular Teltonika RUTX10 ZTE MF18A were upstreamed to the ath10k-firmware repository and landed in linux-firmware.git. Furthermore the BDFs for the: 8devices Habanero 8devices Jalapeno Qxwlan E2600AC C2 have been updated. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mvebu: use PHY LED trigger for speed LEDs on FortiGate 50EINAGAKI Hiroshi2023-05-182-9/+12
| | | | | | | | | | | | | Use <mdio>:<addr>:<speed> trigger instead of netdev(link) trigger for Fortinet FortiGate 50E, to indicate link speed on the each phys. 1000 Mbps: Green 100 Mbps : Amber 10 Mbps : (turn off) Fixes: 102dc5a62506 ("mvebu: add support for Fortinet FortiGate 50E") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mvebu: cortexa9: enable Ethernet PHY LED triggerINAGAKI Hiroshi2023-05-181-0/+1
| | | | | | | To use <mdio>:<addr>:<speed> trigger for LEDs, enable PHY LED trigger (CONFIG_LED_TRIGGER_PHY). Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* download: create immutable subversion checkout archiveTomasz Maciej Nowak2023-05-181-1/+1
| | | | | | | | | On each generation of the archive check sum will differ, because when checking out subversion repository, current date is used for directories creation. Force tar to assign creation date of the last revision for all items inside archive. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* scripts/gen_image_generic.sh: allow passing in partition offsetTim Harvey2023-05-181-1/+1
| | | | | | | | | | Allow passing in an optional offset (PARTOFFSET) for the first partition. If not specified this will default to 256K (512 blocks) as it has before. For example if you want to start partition data at a 16M offset instead of 256K, specify 'PARTOFFSET=16M'. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* octeontx: kernel: add USB storage boot supportTim Harvey2023-05-181-0/+2
| | | | | | | | | Enable BLK_DEV_SD and USB_STORAGE so that rootfs can be on a USB Mass Storage device. This increases the kernel Image by 66KiB Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: kernel: add USB storage boot supportTim Harvey2023-05-181-0/+2
| | | | | | | | | Enable BLK_DEV_SD and USB_STORAGE so that rootfs can be on a USB Mass Storage device. This adds 23KiB to the compressed kernel size Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* nu801: add kmod-leds-uleds to MR26 + MR18Christian Lamparter2023-05-182-2/+2
| | | | | | | | | | | | | | support for MR18 and MR26 was developped before the userspace nu801 was integrated with x86's MX100 into OpenWrt. The initial nu801 + kmod-leds-uleds caused build-bot errors. The solution that worked for the MX100 was to include the kmod-leds-uleds to the device platform module. Thankfully, the MR26 and MR18 can just add the uleds package to the DEVICE_PACKAGES variable. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* libxml2: update to 2.11.3Nick Hainke2023-05-182-4/+4
| | | | | | | | | | | | Changelog: - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.10.4 - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.0 - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.1 - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.2 - https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.3 Fixes: CVE-2023-28484 CVE-2023-29469 Signed-off-by: Nick Hainke <vincent@systemli.org>
* ramips: rename to D-Team Newifi D2 and Lenovo Newifi D1Arınç ÜNAL2023-05-183-6/+6
| | | | | | | Rename Newifi D2 to D-Team Newifi D2, and Newifi D1 to Lenovo Newifi D1. Let's not make naming exceptions because of marketing whims. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* ramips: add support for TOZED ZLT S12 PROArınç ÜNAL2023-05-184-0/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TOZED ZLT S12 PRO is an AC1200 router featuring 4 Ethernet ports with a TOZED TL70-C cellular modem which supports the NCM mode. The stock firmware does SIM locking on the modem by stopping dialing when a different PLMN is detected. This is not the case on OpenWrt. Specifications: - CPU: MediaTek MT7621AT - RAM: 256MB DDR3 - NOR Flash: MX25L12833FM2I 16MB SPI Flash - Wi-Fi 2.4Ghz: MT7603E - Wi-Fi 5Ghz: MT7612E - Switch: MT7530 4x 1Gbit Ports - WWAN: Unisoc SL8563 based TOZED TL70-C LTE CAT6 cellular modem - USB: 1x optional USB2.0 external port - Switches/Buttons: WPS, Reset, Power Switch - LEDs: Power, Wi-Fi, Data, Signal 1-5, Phone Installation and TFTP Recovery: - Connect to serial console. - Boot initramfs image by choosing option 1 when U-Boot prompts. - Install sysupgrade image via OpenWrt. Serial Pins: Located at the bottom right when looking from the front, right under the Reset/WPS buttons. The pinout from the left is: - RX - GND - TX Baudrate is 115200. When connecting from a powered off state, disconnect RX as it blocks the boot process. Link: http://www.sztozed.com/en/contents/58/84.html Co-developed-by: Andre Cruz <me@1conan.com> Signed-off-by: Andre Cruz <me@1conan.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* comgt-ncm: add support for UNISOC SL8563 based TOZED TL70-CArınç ÜNAL2023-05-181-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | TOZED TL70-C is an LTE CAT6 cellular modem based on UNISOC SL8563. UNISOC was formerly called Spreadtrum hence the manufacturer name detected on the modem is spreadtrum. The connect and disconnect commands bring up and down the usb0 interface. They are Base64 encoded as that's what the AT command accepts. The modem can do up to 4 APNs by bringing the USB interfaces, usb0 to usb3, up. Setting the USB interfaces up: connmanctl ndisdial AT^NDISDUN="usb0",1,1 connmanctl ndisdial AT^NDISDUN="usb1",1,2 connmanctl ndisdial AT^NDISDUN="usb2",1,3 connmanctl ndisdial AT^NDISDUN="usb3",1,4 Setting the USB interfaces down: connmanctl ndisdial AT^NDISDUN="usb0",0,1 connmanctl ndisdial AT^NDISDUN="usb1",0,2 connmanctl ndisdial AT^NDISDUN="usb2",0,3 connmanctl ndisdial AT^NDISDUN="usb3",0,4 Co-developed-by: Andre Cruz <me@1conan.com> Signed-off-by: Andre Cruz <me@1conan.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* base-files: add protocol ncm support for ucidef_set_interface()Arınç ÜNAL2023-05-181-0/+1
| | | | | | | Make it possible to set up a default network (interface) for devices with cellular modems using NCM. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* wwan: add Medion S4222 usb lte stickJoe Cooper2023-05-182-1/+6
| | | | | | | | add description for medion usb lte webstick Signed-off-by: Joe Cooper <highjagger+github@gmail.com> [bump PKG_RELEASE] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ucode: update to the latest versionTianling Shen2023-05-181-3/+3
| | | | | | | | | 8f78aff2cb68 ubus: support multiple call return values 51f4dba67313 ucode: also link libresolv if ns_initparse() is not found 5c7d07773a59 uci: fix ctx.commit() without arguments 5163867269fc Merge pull request #148 from jow-/uci-fix-commit Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* mediatek: remove left-over reference to make_gl_metadata.pyDaniel Golle2023-05-181-3/+1
| | | | | | | | When adding support for the GL.iNet GL-MT3000 a reference to the non-existent make_gl_metadata.py script was accidentally added. Remove it, flashing from vendor firmware also works fine without that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: Fix Wireless Frequencies for HYC-G920Muhammad AL-Qadhy2023-05-181-0/+2
| | | | | | Fix wireless frequencies to show correct wireless interfaces. Signed-off-by: Muhammad AL-Qadhy <m.ismael@gmail.com>
* px5g-wolfssl: replace COMMITCOUNT with real PKG_RELEASETianling Shen2023-05-181-1/+1
| | | | | | Similar to the AUTORELEASE conversion process. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* treewide: replace AUTORELEASE with real PKG_RELEASETianling Shen2023-05-1858-58/+58
| | | | | | | | | | | | | | | | | | Based on Paul Fertser <fercerpav@gmail.com>'s guidance: Change AUTORELEASE in rules.mk to: ``` AUTORELEASE = $(if $(DUMP),0,$(shell sed -i "s/\$$(AUTORELEASE)/$(call commitcount,1)/" $(CURDIR)/Makefile)) ``` then update all affected packages by: ``` for i in $(git grep -l PKG_RELEASE:=.*AUTORELEASE | sed 's^.*/\([^/]*\)/Makefile^\1^';); do make package/$i/clean done ``` Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* firmware-utils: update to latest HEADDavid Bauer2023-05-181-3/+3
| | | | | | | | | 02cdbc6 tplink-safeloader: add Archer AX23 v1.2 (RU) de36fa6 tplink-safeloader: add AX23 support-list entry 5f6fefd tplink-safeloader: order AX23 support-list 25131d6 tplink-safeloader: add Archer C59 / C60 CA ragion code Signed-off-by: David Bauer <mail@david-bauer.net>
* libselinux: update to 3.5Linhui Liu2023-05-181-6/+5
| | | | | | | | | | | | | Switch from libpcre to libpcre2. While working on it remove the double defined HOST_BUILD_DEPENDS section. Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com> [depend on libpcre2] Signed-off-by: Nick Hainke <vincent@systemli.org>
* secilc: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* policycoreutils: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* libsemanage: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* libsepol: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* checkpolicy: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* pcre: move package to packages feedNick Hainke2023-05-182-140/+0
| | | | | | | With the update of selinux no package depends anymore on pcre in the base repository. Move it to packages feed. Signed-off-by: Nick Hainke <vincent@systemli.org>
* pcre2: import pcre2 from packages feedNick Hainke2023-05-182-0/+138
| | | | | | | pcre2 is needed by newer selinux versions, so it needs to be in the base repository. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ci: fix check kernel patches jobPetr Štetiar2023-05-181-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the check fails due to the following error: warning: Not a git repository. Use --no-index to compare two paths outside a working tree usage: git diff --no-index [<options>] <path> <path> Thats likely caused by commit 1cb8cdbf0723 ("ci: use new buildbot worker images with Debian 11") which contains a patched Git version with CVE security fixes introduced in DLA-3239-2: Multiple issues were found in Git, a distributed revision control system. An attacker may cause other local users into executing arbitrary commands, leak information from the local filesystem, and bypass restricted shell. Note: Due to new security checks, access to repositories owned and accessed by different local users may now be rejected by Git; in case changing ownership is not practical, git displays a way to bypass these checks using the new "safe.directory" configuration entry. So lets opt-out of this new behavior by setting `safe.directory=*` and thus force Git to consider all Git repositories as safe regardless of their owner, since we need to trust those sources anyway and it should be likely more robust solution, then fiddling with filesystem permissions. Fixes: 1cb8cdbf0723 ("ci: use new buildbot worker images with Debian 11") References: https://www.debian.org/lts/security/2022/dla-3239-2 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mediatek: update patch add PWM support for MT7981Daniel Golle2023-05-181-119/+29
| | | | | | Update patch with version submitted upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for the GL.iNet GL-MT3000Daniel Golle2023-05-184-3/+295
| | | | | | | | | | | | | | | | | | | | | | The MT-3000 is a pocket-sized Wi-Fi 6 router based on MediaTek MT7981. Specification: - SoC: MediaTek MT7981B - CPU: 2x 1.3 GHz Cortex-A53 - Flash: 256 MiB Macronix SPI NAND - RAM: 512 MiB Nanya DDR4 - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN) - Ethernet: - 1x 10/100/1000 Mbps built-in PHY (LAN) - 1x 10/100/1000/2500 Mbps MaxLinear GPY211 PHY (WAN) - USB 3.0 port - Buttons: 1 button, 1 switch - LEDs: 1x light-blue, 1x warm-white - Serial console: internal 4-pin header, 115200 8n1 - PWM controlled fan with tacho - Power: 5 VDC, 3 A (USB Type-C) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: fix mt7601u firmware path and refresh patchesDaniel Golle2023-05-186-8/+65
| | | | | | | Import patch fixing the updated firmware path of mt7601u.bin. Refresh patches while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Cudy WR3000 v1David Bauer2023-05-186-0/+318
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- MediaTek MT7981 WiSoC 256MB DDR3 RAM 16MB SPI-NOR (XMC XM25QH128C) MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5) UART: 115200 8N1 3.3V [LEDS] VCC-GND-RX-TX [ETH] Header is located below the heatsink Case ---- Unscrew the 4 bottom screws. Remove the top of the case by inserting a small screwdriver into the ventilation holes and lift the top cover. This works best by beginning near the ETH-ports. The top is clipped on the front near the LEDs with two plastic clips. The back has a single clip in the middle. Start at one of the back edges. MAC-Addresses ------------- 80:AF:CA:00:F9:C6 LAN 80:AF:CA:00:F9:C7 WAN 80:AF:CA:00:F9:C6 W2 82:AF:CA:30:F9:C6 W5 Installation ------------ 1. Connect to the serial port as described in the "Hardware" section. 2. Power on the device. Keep pressing the "0" key to enter the U-Boot shell. 3. Download the OpenWrt initramfs image. Place it on an TFTP server connected to the Cudy LAN ports. Make sure the server is reachable at 192.168.1.2. Rename the image to "cudy3000.bin" 4. Download and boot the OpenWrt initramfs image. $ tftpboot 0x46000000 cudy3000.bin; bootm 0x46000000 5. Transfer the OpenWrt sysupgrade image to the device using scp. Install with sysupgrade. Note: Cudy does not yet provide a image for disabling their signature-protection. This has happened in the past. Make sure to check the wiki for a possible easier installation method. Signed-off-by: David Bauer <mail@david-bauer.net>
* iwinfo: update to latest HEADDavid Bauer2023-05-181-3/+3
| | | | | | | c9f5c3f devices: add MediaTek MT7981 WMAC compatible b3888b2 devices: add compatible strings for Ralink WiSoCs Signed-off-by: David Bauer <mail@david-bauer.net>
* mt76: add MT7981 firmware packagesDavid Bauer2023-05-181-0/+16
| | | | | | Package the firmware required for MT7981 to bring up the radio. Signed-off-by: David Bauer <mail@david-bauer.net>
* mt76: update to latest HEADDavid Bauer2023-05-183-343/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 969b7b5e wifi: mt76: mt7915: add support for MT7981 cddbd796 linux-firmware: add firmware for MT7981 c69b0239 linux-firmware: update firmware for MT7921 WiFi device c85a0f2f mt7921: remove duplicated line 0cbe1376 wifi: mt76: mt7915: drop redundant prefix of mt7915_txpower_puts() b490c6c7 wifi: mt76: fix 6GHz high channel not be scanned db5a8f70 wifi: mt76: move shared mac definitions in mt76_connac2_mac.h 3963ab2f wifi: mt76: mt7921: get rid of eeprom.h c09f943d wifi: mt76: add mt76_connac_gen_ppe_thresh utility routine 28ea992c wifi: mt76: get rid of unused sta_ps callbacks 2936b036 wifi: mt76: add mt76_connac_irq_enable utility routine 482d2a76 wifi: mt76: move irq_tasklet in mt76_dev struct 88d1b002 wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu support 577fbd47 linux-firmware: update firmware for MT7916 32be54b5 linux-firmware: update firmware for MT7921 WiFi device 4e2fad04 linux-firmware: update firmware for MT7922 WiFi device f8793b1a linux-firmware: update firmware for MT7921 WiFi device 91e6ad2a linux-firmware: update firmware for MT7921 WiFi device b7a538a3 linux-firmware: update firmware for MT7922 WiFi device e3b5a8cc wifi: mt76: mt7996: enable configured beacon tx rate a18bf481 wifi: mt76: mt7996: enable BSS_CHANGED_MCAST_RATE support f863beed wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support aedc10d5 wifi: mt76: connac: add nss calculation into mt76_connac2_mac_tx_rate_val() 84a227e5 wifi: mt76: connac: fix txd multicast rate setting a0657180 wifi: mt76: mt7921e: stop chip reset worker in unregister hook fd895347 wifi: mt76: mt7921e: improve reliability of dma reset c9fa8d64 wifi: mt76: mt7921: fix missing unwind goto in `mt7921u_probe` c1baa812 mt76: mt7921: fix kernel panic by accessing unallocated eeprom.data ca180889 wifi: mt76: move mcu_uni_event and mcu_reg_event in common code 98fbca7a wifi: mt76: mt7996: enable coredump support be1ff24e wifi: mt76: mt7996: add full system reset knobs into debugfs b7a6c0ef wifi: mt76: mt7996: enable full system reset support 46f28e75 wifi: mt76: mt7921: enable p2p support 6a7e41c3 wifi: mt76: mt7921e: Set memory space enable in PCI_COMMAND if unset 084e6de7 wifi: mt76: mt7921: use driver flags rather than mac80211 flags to mcu c66e7a1a wifi: mt76: mt7921: introduce mt7921_get_mac80211_ops utility routine 821caac5 wifi: mt76: mt7996: fix eeprom tx path bitfields 9ae2569b wifi: mt76: mt7996: remove mt7996_mcu_set_pm() 3244d176 wifi: mt76: mt7996: init mpdu density cap 210a558a wifi: mt76: mt7996: fix pointer calculation in ie countdown event 207c92bb wifi: mt76: mt7996: remove unused eeprom band selection 16a24667 wifi: mt76: mt7996: let non-bufferable MMPDUs use correct hw queue d39bb7c8 wifi: mt76: mt7996: remove mt7996_mcu_beacon_check_caps() 4046b591 wifi: mt76: mt7915: remove mt7915_mcu_beacon_check_caps() d63cb85c wifi: mt76: add missing locking to protect against concurrent rx/status calls 22f1b777 mt76: adjust for ieee80211_is_bufferable_mmpdu API change 8ecf551c wifi: mt76: set NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 on supported drivers efa44cb5 wifi: mt76: ignore key disable commands 56f0cd4d wifi: mt76: mt7915 add tc offloading support 021ded36 tools: Fix compile error with glibc Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: fix typoDavid Bauer2023-05-181-1/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* bmips: improve kernel patchesÁlvaro Fernández Rojas2023-05-1714-185/+181
| | | | | | | Add missing patch headers and regenerate the ones that contain an obsolete patch header. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mdadm: fix compilation with musl 1.2.4Nick Hainke2023-05-161-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | _LARGEFILE64_SOURCE has to be defined in the source, or CFLAGS can be used to pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions. Fixes error in the form of: restripe.c: In function 'restore_stripes': restripe.c:758:43: error: 'off64_t' undeclared (first use in this function); did you mean 'off_t'? 758 | (off64_t)read_offset) { | ^~~~~~~ | off_t restripe.c:758:43: note: each undeclared identifier is reported only once for each function it appears in restripe.c:758:51: error: expected ')' before 'read_offset' 758 | (off64_t)read_offset) { | ^~~~~~~~~~~ | ) restripe.c:757:36: note: to match this '(' 757 | if (lseek64(source, read_offset, 0) != | ^ make[3]: *** [Makefile:193: restripe.o] Error 1 Fixes: fff878c5bcda ("toolchain/musl: update to 1.2.4") Signed-off-by: Nick Hainke <vincent@systemli.org>
* e2fsprogs: fix compilation with musl 1.2.4Tianling Shen2023-05-161-1/+5
| | | | | | | | | musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces and autotools failed to check the lseek64 function. Force enable ac_cv_func_lseek64 to workaround it. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* f2fs-tools: fix compilation with musl 1.2.4Tianling Shen2023-05-161-1/+5
| | | | | | | | | musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces and autotools failed to check the lseek64 function. Force enable ac_cv_func_lseek64 to workaround it. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* ath79: add support for MikroTik RB951Ui-2HnDMichał Kępień2023-05-166-0/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MikroTik RB951Ui-2HnD is a wireless SOHO router that was previously supported by the ar71xx target, see commit d19b868b12 ("ar71xx: Add support for MikroTik RB951Ui-2HnD"). Specifications -------------- - SoC: Atheros AR9344 (600 MHz) - RAM: 128 MB (2x 64 MB) - Storage: 128 MB NAND flash (various manufacturers) - Ethernet: Atheros AR8229 switch, 5x 10/100 Mbit/s - 1x PoE in (port 1, 8-30 V input) - 1x PoE out (port 5, 500 mA output) - Wireless: Atheros AR9340 (802.11b/g/n) - USB: 2.0 (1A) - 9x LED: - 1x power (green, not configurable) - 1x user (green) - 5x FE ports (green) - 1x wireless (green) - 1x PoE out (red) - 1x button (restart) See https://mikrotik.com/product/RB951Ui-2HnD for more details. Flashing -------- TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedures at https://openwrt.org/toh/mikrotik/common. Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
* libbsd: fix compilation with musl 1.2.4Robert Marko2023-05-161-1/+3
| | | | | | | | | | | musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces so just having _GNU_SOURCE defined is not enough anymore. _LARGEFILE64_SOURCE has to be defined in the source, or CFLAGS can be used to pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions. Fixes: fff878c5bcda ("toolchain/musl: update to 1.2.4") Signed-off-by: Robert Marko <robimarko@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 06:35:41 +0000