aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.178John Audia2023-04-2219-112/+43
| | | | | | | | | | | Removed upstreamed: backport-5.10/430-v6.3-ubi-Fix-failure-attaching-when-vid_hdr-offset-equals.patch[1] 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.178&id=0279e82e148407feec88466990de14bcba9e12c0 All other patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.108John Audia2023-04-2226-197/+43
| | | | | | | | | | | | | | | | | Removed upstreamed: backport-5.15/430-v6.3-ubi-Fix-failure-attaching-when-vid_hdr-offset-equals.patch[1] backport-5.15/612-v6.3-skbuff-Fix-a-race-between-coalescing-and-releasing-S.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.108&id=85d7a7044b759d865d10395a357632af00de5867 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.108&id=906a6689bb0191ad2a44131a3377006aa098af59 Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: update nvmem cell mac-address-ascii supportChukun Pan2023-04-212-42/+52
| | | | | | | | Instead of use mac-address-ascii in nvmem_get_mac_address function, move it into of_get_mac_addr_nvmem function to support more devices. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ramips: MSG1500 X.00: switch to mac-address-ascii dtsChukun Pan2023-04-213-17/+30
| | | | | | | | The Config partition of some machines is special, and the openwrt script cannot read the protest_lan_mac correctly. This problem can be solved by reading the mac address (ascii) in dts. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: filogic: remove redundant code for tuf-ax4200Chukun Pan2023-04-211-2/+1
| | | | | | Remove redundant code in 02_network. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: filogic: move mac address setting togetherChukun Pan2023-04-211-4/+6
| | | | | | Simultaneously sort in the order of letters. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: filogic: fix network config for mt7986a-rfbChukun Pan2023-04-211-1/+3
| | | | | | | Fix the network configuration according to the device tree. Fixes: 5faff99 ("mediatek: filogic: fix mt7986a ethernet devicetree entries") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* tools/squashfs4: backport OpenWrt extended options patchChristian Marangi2023-04-203-1/+900
| | | | | | | | | | | | | Due to us keeping a patch around for years and never proposing it to squashfs4 repository, we resulted in having the same squashfs4 version but with different supported options. (openwrt patched -- upstream) To workaround this problem, a non-standard option was required. To not have surprise on tool bump, backport the patch and add the new config option required to enable these extended non-standard options. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ksmbd: update to latest 3.4.8 releaseAndrew Sim2023-04-201-2/+2
| | | | | | Changelog: https://github.com/cifsd-team/ksmbd/releases/tag/3.4.8 Signed-off-by: Andrew Sim <andrewsimz@gmail.com>
* tools/lz4: build with mesonRosen Penev2023-04-202-23/+12
| | | | | | | | | | | | | | | | Simplifies Makefile and speeds up compilation. Before: Executed in 68.00 secs fish external usr time 104.17 secs 1.33 millis 104.17 secs sys time 4.29 secs 0.35 millis 4.29 secs After: Executed in 27.98 secs fish external usr time 25.18 secs 1.32 millis 25.18 secs sys time 3.31 secs 0.35 millis 3.31 secs Signed-off-by: Rosen Penev <rosenp@gmail.com>
* uboot-mediatek: fix factory/reset buttonDaniel Golle2023-04-2013-22/+110
| | | | | | | | | | | U-Boot commit ea6fdc13595 ("dm: button: add support for linux_code in button-gpio.c driver") makes it mandatory to specify linux,code for all buttons. As that broke handling of the reset button in U-Boot with the update to U-Boot 2023.04, add linux,code for all butons. Reported-by: @DragonBluep Fixes: 50f7c5af4a ("uboot-mediatek: update to v2023.04") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: filogic: update kernel config-5.15Daniel Golle2023-04-201-1/+4
| | | | | | | Expose thermal-zone as hwmon sensor, remove thermal emulation driver and add some missing symbols. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: bpi-r3: allow up to 3W per SFP moduleDaniel Golle2023-04-201-0/+2
| | | | | | | | | According to SinoVoip up to 3A @ 3.3V are available for both SFP modules together. Raise energy limit from 1W (default) to 3W, however, be aware that using modules consuming more than 1W will require active cooling! Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* tools/dwarves: update to 1.25Nick Hainke2023-04-191-5/+3
| | | | | | | | | Remove AUTORELEASE and HOST_BUILD_PARALLEL. Release Notes: https://lore.kernel.org/dwarves/ZDG4qxirpIfmbiip@kernel.org/T/#u Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: fix up qrtr packaging after 5.15.107 bumpStefan Lippers-Hollmann2023-04-191-2/+1
| | | | | | | | qrtr/ns.ko is now merged into qrtr/qrtr.ko, so drop the individual module packaging. Fixes: f4989239cc91 ("kernel: bump 5.15 to 5.15.107") Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> #ipq807x/ax3600, x86_64/FW-7543B, mt7621/dap-x1860
* kernel: bump 5.15 to 5.15.107John Audia2023-04-1910-20/+20
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* tools/cmake: update to 3.26.3Nick Hainke2023-04-191-2/+2
| | | | | | | | | Release Notes: - https://www.kitware.com/cmake-3-26-1-available-for-download/ - https://www.kitware.com/cmake-3-26-2-available-for-download/ - https://www.kitware.com/cmake-3-26-3-available-for-download/ Signed-off-by: Nick Hainke <vincent@systemli.org>
* mwlwifi: update to version 10.3.9.0-20230311Kabuli Chana2023-04-196-133/+19
| | | | | | | | | | | | | upstream PR 408 improvements: -Fix AMSDU packets unused -Removed the ASMDU packets queue -Add more info in the iw tool -fix is_hw_crypto_enabled -Optimization AMPDU_TX_OPERATIONAL (avoid a spinlock) change to wongsyrone mod Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* bmips: pci-bcm6348: load IO resource from DT rangesÁlvaro Fernández Rojas2023-04-183-28/+14
| | | | | | Correctly load IO resource from DT ranges and remove the specific IO resource. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: drop unneeded ath9k fixupÁlvaro Fernández Rojas2023-04-182-243/+1
| | | | | | | We no longer need the custom ath9k fixup now that we're using the standard kmod-owl-loader. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: hg556a: switch to kmod-owl-loaderÁlvaro Fernández Rojas2023-04-183-14/+66
| | | | | | Stop using custom ath9k fixup and switch to standard kmod-owl-loader Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* tools/bzip2: add `bzip2` binariesTony Butler2023-04-184-0/+484
| | | | | | | | | | | | | | | `bzip2` is the standard executable for bzip2 compression this includes development includes and both static and shared libs (libbz2) which can be used by other packages the initramfs generator offers the BZIP2 option but there was no executable to support it, and worked only via side effect of having a system-installed version of bzip2, which could be less predictable Signed-off-by: Tony Butler <spudz76@gmail.com> [ remove unintended change ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* Revert "tools/bzip2: add `bzip2` binaries"Christian Marangi2023-04-184-484/+1
| | | | | | | | | This reverts commit 394d7134ec42f14ddb91769c737098753fa68266. The commit has unintentded change that cause compilation error with SDK or LZO compression. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mac80211: ath11k: replace 160MHz fix with upstream pending oneRobert Marko2023-04-183-31/+132
| | | | | | | | QCA has finally sent a proper fixup for the 160MHz regression upstream, so lets use the pending fix which also properly sets center frequency 2 in case 80+80 MHz is used. Signed-off-by: Robert Marko <robimarko@gmail.com>
* build: fix incorrect initramfs gzip compressionTony Butler2023-04-181-1/+1
| | | | | | | | | | | | | | | | | Requires: tools/libdeflate fix consistency of executable to use `$(STAGING_DIR_HOST)/bin/libdeflate-gzip`, and not system-installed ones from the usual environment `PATH`; this affects option `CONFIG_KERNEL_INITRAMFS_COMPRESSION_GZIP` this may have worked in the past but only via side effect of having the binaries on the host system (and whatever unpredictable version or patchset those might be), and did not use the improved but totally compatible libdeflate-gzip Fixes: 330bd380e8b6 ("image: allow building FIT and uImage with ramdisk") Signed-off-by: Tony Butler <spudz76@gmail.com>
* build: fix incorrect initramfs bzip2 compressionTony Butler2023-04-181-1/+1
| | | | | | | | | | | | | | | Requires: tools/bzip2 fix consistency of executable to use `$(STAGING_DIR_HOST)/bin/bzip2`, and not system-installed ones from the usual environment `PATH`; this affects option `CONFIG_KERNEL_INITRAMFS_COMPRESSION_BZIP2` this may have worked in the past but only via side effect of having the binaries on the host system (and whatever unpredictable version or patchset those might be) Fixes: 330bd380e8b6 ("image: allow building FIT and uImage with ramdisk") Signed-off-by: Tony Butler <spudz76@gmail.com>
* tools/bzip2: add `bzip2` binariesTony Butler2023-04-184-1/+484
| | | | | | | | | | | | | `bzip2` is the standard executable for bzip2 compression this includes development includes and both static and shared libs (libbz2) which can be used by other packages the initramfs generator offers the BZIP2 option but there was no executable to support it, and worked only via side effect of having a system-installed version of bzip2, which could be less predictable Signed-off-by: Tony Butler <spudz76@gmail.com>
* ath79: mikrotik: update kernel on NAND using YafutMichał Kępień2023-04-183-8/+5
| | | | | | | | | | | | | | | | | | | | | Instead of erasing the entire NAND partition holding the kernel during every system upgrade and then flashing a Yaffs file system image prepared using kernel2minor (not accounting for bad blocks in the process), use the Yafut utility to replace the kernel executable on MikroTik NAND devices, preserving the existing Yaffs file system (including bad block information) on the partition holding the kernel. Add Yafut to DEFAULT_PACKAGES for the ath79/mikrotik target, so that the tool is included in the initramfs images created when building for multiple profiles. However, exclude Yafut from the images built for MikroTik devices with NOR flash as the tool is currently only meant to be used on devices with NAND flash. As this addresses the concerns for MikroTik NAND devices discussed in commit 9d96b6fb72 ("ath79/mikrotik: disable building NAND images"), re-enable building images for these devices. Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
* yafut: add a kernel update tool for MikroTik NANDMichał Kępień2023-04-181-0/+35
| | | | | | | | | | | | | | | | | | | | | | Commit 9d96b6fb72 ("ath79/mikrotik: disable building NAND images") disabled building images for MikroTik devices with NAND flash due to a less than satisfactory method used for updating the kernel on those devices back then. To address the problem, add support for updating the kernel on MikroTik devices with NAND flash using a new tool, Yafut, which enables copying files from/to Yaffs file systems even if the kernel does not have native support for the Yaffs file system compiled in. Instead of erasing the entire NAND partition holding the kernel during every system upgrade (which is what the previously-used approach employing kernel2minor involved), Yafut preserves the Yaffs filesystem present on that partition and only replaces the kernel executable. This allows bad block information to be preserved across sysupgrade runs and also enables wear leveling on the NAND partition holding the kernel. Yafut does not rely on kernel2minor in any way and intends to eventually supersede the latter for NAND devices. Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
* kernel: backport MEMREAD ioctlMichał Kępień2023-04-1815-17/+908
| | | | | | | | | MEMREAD is a new ioctl for MTD character devices that was first included in Linux 6.1. It allows userspace applications to use the Linux kernel's OOB autoplacement mechanism while reading data from NAND devices. The Yafut tool needs this ioctl to do its job. Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
* ath79: mikrotik: drop unused files from ramdiskMichał Kępień2023-04-181-2/+1
| | | | | | | | | | | | | | | | | | | The ramdisk used by sysupgrade on MikroTik devices currently includes U-Boot fw_* files that are not necessary for performing a system upgrade on that platform. The relevant lines were added to target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh by commit a66eee6336 ("ath79: add mikrotik subtarget"), likely because they also existed in target/linux/ath79/nand/base-files/lib/upgrade/platform.sh, where the platform_do_upgrade_mikrotik_nand() function moved by commit a66eee6336 originally lived. However, these lines were added to target/linux/ath79/nand/base-files/lib/upgrade/platform.sh by commit 55e6c903ae ("ath79: GL-AR300M: provide NAND support; increase to 4 MB kernel"), which is not related to MikroTik devices in any way. Remove the code adding unused U-Boot fw_* files to the ramdisk used by sysupgrade on MikroTik devices. Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
* mac80211: update to v6.1.24Felix Fietkau2023-04-1844-1296/+233
| | | | | | Drop patches accepted upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath79: create Aruba AP-105 APBoot compatible imageDavid Bauer2023-04-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alter the Aruba AP-105 image generation process so OpenWrt can be loaded with the vendor Aruba APBoot. This works by prepending the OpenWrt LZMA loader to the uImage and jumping directly to the loader. Aruba does not offer bootm on these boards. This approach keeps compatibility to devices which had their U-Boot replaced. Both bootloaders can boot the same image. The same modification is most likely also possible for the Aruba AP-175. With this patch, new installations do not require replacing the bootloader and can be performed from the serial console without opening the case. Installation ------------ 1. Attach to the serial console of the AP-105. Interrupt autoboot and change the U-Boot env. $ setenv apb_rb_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; netget 0x84000000 ap105.bin; go 0x84000040" $ setenv apb_fb_openwrt "cp.b 0xbf040000 0x84000000 0x10000; go 0x84000040" $ setenv bootcmd "run apb_fb_openwrt" $ saveenv 2. Load the OpenWrt initramfs image on the device using TFTP. Place the initramfs image as "ap105.bin" in the TFTP server root directory, connect it to the AP and make the server reachable at 192.168.1.66/24. $ run apb_rb_openwrt 3. Once OpenWrt booted, transfer the sysupgrade image to the device using scp and use sysupgrade to install the firmware. Signed-off-by: David Bauer <mail@david-bauer.net>
* firmware-utils: update to latest HEADDavid Bauer2023-04-181-3/+3
| | | | | | e8191eb tplink-safeloader: increase support-list size for AX23 v1 Signed-off-by: David Bauer <mail@david-bauer.net>
* tools/libdeflate: update to 1.18Nick Hainke2023-04-171-3/+3
| | | | | | | Release Notes: https://github.com/ebiggers/libdeflate/blob/master/NEWS.md#version-118 Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: fix LED pinout for Comfast CF-E314N v2Mark Onstid2023-04-171-6/+6
| | | | | | | | | | | | In addition to standardizing LED names to match the rest of the systems, this commit fixes a possibly erroneous pinout for LEDs in Comfast CF-E314N v2. In particular, rssimediumhigh and rssihigh are moved from pins 13 and 14 to 14 and 16 respectively. In addition to working on a test device, this pinout better matches the one set out in the prototype support patch for the device in Github PR #1873. Signed-off-by: Mark Onstid <turretkeeper@mail.com>
* ramips: add Xiaomi RA75 red signal ledOleksandr Zharov2023-04-171-0/+11
| | | | | | | | | | | | | | | | | RA75 has 5 physical LEDs under 2 indicators, mixed with light pipes: Indicator "System": GPIO0: blue GPIO2: amber Indicator "Signal": GPIO44: blue GPIO37: amber GPIO46: red All except GPIO46 were already added by Jo Deisenhofer. GPIO46 is used for UART1 by default, so it needs additional pin control change in devicetree to be operational. Verified on my RA75. Signed-off-by: Oleksandr Zharov <alex.zeed@gmail.com>
* netifd: update to the latest versionFelix Fietkau2023-04-171-3/+3
| | | | | | 7de5440a520f device: fix segfault when recreating devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tcpdump: update to 4.99.4Nick Hainke2023-04-171-2/+2
| | | | | | | | | Fixes CVE-2023-1801. Changelog can be found here: https://git.tcpdump.org/tcpdump/blob/55bc126b0216cfe409b8d6bd378f65679d136ddf:/CHANGES Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq40xx: convert AP-365 to DSADavid Bauer2023-04-152-2/+2
| | | | | | | | | Re-enable the Aruba AP-365 with DSA support. Changes are trvivial, as the board design is pretty much the already updated AP-303. Run-tested on the device. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: backport fix for recently introduced UBI bugDaniel Golle2023-04-154-4/+142
| | | | | | | | | Import commit "ubi: Fix failure attaching when vid_hdr offset equals to (sub)page size" which did not yet make it to stable upstream Linux trees. Fixes: #12232 Fixes: #12339 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix build for RAVPower RP-WD009Daniel Golle2023-04-141-28/+8
| | | | | | | | | | | | Updating to U-Boot 2023.04 broke the build for the RAVPower RP-WD009 MT7628 board. This was due to upstream conversion of CONFIG_* to CFG_* which was not applied to our downstream patch adding support for the RAVPower RP-WD009 device. Apply CONFIG_* to CFG_* converion analog to what has been done also for mt7928_rfb upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport fix for a page pool related race conditionFelix Fietkau2023-04-142-0/+170
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* generic: move accepted patch to backport-5.15Daniel Golle2023-04-132-13/+37
| | | | | | | | | | The patch adding SFP quirk for MXPD 483II was accepted upstream and will be part of Linux v6.3: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=ad651d68cee75e9ac20002254c4e5d09ee67a84b Move the patch from pending-5.15 to backport-5.15. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: sync pinctrl-mt7981 and pinctrl-mt7986 driversDaniel Golle2023-04-132-25/+150
| | | | | | | Now that new pinconf features have been backported sync pinctrl-mt7981 and pinctrl-m7986 with bleeding-edge upstream versions. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: backport new pinctrl featuresDaniel Golle2023-04-137-0/+1077
| | | | | | | | Backport new features for MediaTek pinctrl/pinconf drivers from upstream. This will serve as the base to improve pinconf bias/pull-up/pull-down on MT7981 and MT7986, and also prepare for upcoming support for MT7988. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uclient: update to Git version 2023-04-13Matthias Schiffer2023-04-131-3/+3
| | | | | | | | 007d94546749 uclient: cancel state change timeout in uclient_disconnect() 644d3c7e13c6 ci: improve wolfSSL test coverage dc54d2b544a1 tests: add certificate check against letsencrypt.org Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mvebu: puzzle-mcu: add mcu write retry functionIan Chang2023-04-132-0/+126
| | | | | | | Avoid MCU getting "command reply receive timed out" message when LED configuration setting trigger function is enabled in heartbeat mode. Signed-off-by: Ian Chang <ianchang@ieiworld.com>
* uboot-mediatek: update to v2023.04Daniel Golle2023-04-1241-298/+427
| | | | | | | | | | | | | | | | | | | | | | | | Update to next U-Boot timed release. Remove now obsolete patch 100-01-board-mediatek-add-more-network-configurations.patch Default IP addresses are now dealt with in Kconfig, no longer in board- specific C header files. Add patches to restore ANSI support in bootmenu which was broken upstream, always use high-speed mode on serial UART for improved stability and fix an issue with pinconf not being applied on MT7623 resulting in eMMC being inaccessible when booting from micro SD card. In order to keep the size of the bootloader on MT7623 below 512kB remove some unneeded commands on both MT7623 boards. Tested on: * BananaPi BPi-R2 (MT7623N) * BananaPi BPi-R3 (MT7986A) * BananaPi BPi-R64 (MT7622A) * Linksys E8450 (MT7622B) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: add 'isup' to the wifi scriptAndre Heider2023-04-121-1/+18
| | | | | | | | | | | | | | This is a silent command that allows easy wifi up/down automation for scripts. It takes one or multiple devices as arguments (or all if none are passed), and the exit code indicates if any of those is not up. E.g.: wifi isup && echo "all wifi devices are up" wifi isup radio0 || echo "this wifi is down" Signed-off-by: Andre Heider <a.heider@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-27 19:49:24 +0000