aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* kernel: drop mips highmem offset start overridesFelix Fietkau2023-07-242-38/+0
| | | | | | | | | | | | The maximum offset that can be supported is 0x20000000 Do not override it to to something bigger than that on MT7621, as that could cause issues based on the fixed memory mappings. This makes the last 64 MB RAM unusable on MT7621 devices with 512 MB but avoids incurring a heavy performance hit Fixes: cd2b74e01e8d ("ramips: mt7621: disable highmem support and remove highmem offset patch") Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit a110de8152df46a1e2adf7010ba75fb3b1236cd8)
* ramips: mt7621: disable highmem support and remove highmem offset patchFelix Fietkau2023-07-242-3/+19
| | | | | | | | | | | On MT7621 it was observed, that enabling highmem support causes a significant performance drop, as documented in: https://github.com/openwrt/openwrt/issues/13151 By adjusting the highmem start offset, we avoid leaving any RAM unaddressable, even on devices with 512 MB Fixes: https://github.com/openwrt/openwrt/issues/13151 Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit cd2b74e01e8d5f5b80b82db1cb204c13ed99dd58)
* mediatek: add support for ZyXEL NWA50AX ProDavid Bauer2023-07-236-1/+298
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Mediatek MT7981 RAM: 512M DDR4 FLASH: 256M NAND ETH: MaxLinear GPY211 (2.5GbE N Base-T) WiFi: Mediatek MT7981 (2.4GHz 2T2R:2 5GHz 3T3R:2 802.11ax) BTN: 1x Reset LED: 1x Multi-Color UART Console ------------ Available below the rubber cover next to the ethernet port. Settings: 115200 8N1 Layout: <12V> <LAN> GND-RX-TX-VCC Logic-Level is 3V3. Don't connect VCC to your UART adapter! Installation Web-UI ------------------- Upload the Factory image using the devices Web-Interface. As the device uses a dual-image partition layout, OpenWrt can only installed on Slot A. This requires the current active image prior flashing the device to be on Slot B. In case this is not the case, OpenWrt will boot only one time, returning to the ZyXEL firmware the second boot. If this happens, first install a ZyXEL firmware upgrade of any version and install OpenWrt after that. Installation TFTP / Recovery ---------------------------- This installation routine is especially useful in case of a bricked device. Attach to the UART console header of the device. Interrupt the boot procedure by pressing Enter. The bootloader has a reduced command-set available from CLI, but more commands can be executed by abusing the atns command. Boot a OpenWrt initramfs image available on a TFTP server at 192.168.1.66. Rename the image to nwa50axpro-openwrt-initramfs.bin. $ atnf nwa50axpro-openwrt-initramfs.bin $ atna 192.168.1.88 $ atns "192.168.1.66; tftpboot; setenv fdt_high 0xffffffffffffffff; bootm" Upon booting, set the booted image to the correct slot: $ zyxel-bootconfig /dev/mtd9 get-status $ zyxel-bootconfig /dev/mtd9 set-image-status 0 valid $ zyxel-bootconfig /dev/mtd9 set-active-image 0 Copy the OpenWrt sysupgrade image to the device using scp. Write the sysupgrade image to NAND using sysupgrade. $ sysupgrade -n image.bin Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f0445746f6fd96fc7c5394b238153bd2ff22bc5b)
* mediatek: filogic: set DEVICE_DTS_LOADADDR for BPi-R3Daniel Golle2023-07-221-0/+1
| | | | | | | | U-Boot complains that the overlayed DT needs relocation, so set DEVICE_DTS_LOADADDR to have it relocated. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit b1d10e0174f71099016a7e6dcd27b65a77fd51b4)
* libbpf: Update to v1.2.2Tony Ambardar2023-07-201-3/+3
| | | | | | | | Update to the latest upstream release to include recent bugfixes: Link: https://github.com/libbpf/libbpf/compare/v1.2.0...v1.2.2 Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit 1d5e7b85ccc58f3d010a54e82ccea81fc102262b)
* nftables: update to 1.0.8Nick Hainke2023-07-201-2/+2
| | | | | | | | ChangeLog: https://www.netfilter.org/projects/nftables/files/changes-nftables-1.0.8.txt Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 58c498247b3d06c0ff1967d2f48ba84084a6cf25)
* libnftnl: update to 1.2.6Nick Hainke2023-07-201-3/+3
| | | | | | | | Release Notes: https://lists.netfilter.org/pipermail/netfilter-announce/2023/000250.html Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit e57a752217113d066cdea2073f35e8c7c1fafaa6)
* hostapd: update to 2023-06-22Andre Heider2023-07-2032-202/+162
| | | | | | | | | | | | | | | Removed, merged upstream: - 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch Manually refreshed: - 040-mesh-allow-processing-authentication-frames-in-block.patch - 600-ubus_support.patch - 761-shared_das_port.patch Fixes: #12661 Fixes: 304423a4 ("hostapd: update to 2023-03-29") Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit cd804c1ebb34c9740f8ad9fe393a81f3efb7b009)
* linux-firmware: update to 20230625John Audia2023-07-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change from git log --oneline: ee91452d (tag: 20230625) Makefile, copy-firmware: support xz/zstd compressed firmware ad2ce8be copy-firmware: silence the last shellcheck warnings 67bf50e7 copy-firmware: drop obsolete backticks, quote 77f31a80 copy-firmware: tweak sed invocation 40fa2b20 copy-firmware: quote deskdir and dirname 77f92e0b check_whence: error if symlinks are in-tree f2671b1f check_whence: error if File: is actually a link 4b539e7a check_whence: strip quotation marks 32693d3b linux-firmware: wilc1000: update WILC1000 firmware to v16.0 109b23c5 ice: update ice DDP wireless_edge package to 1.3.10.0 ade163aa amdgpu: DMCUB updates for DCN 3.1.4 and 3.1.5 045b2136 amdgpu: update DMCUB to v0.0.172.0 for various AMDGPU ASICs 5a1842ce Merge branch 'rb3-update' of https://github.com/lumag/linux-firmware 2f81bd9f fix broken cirrus firmware symlinks 01a7a844 qcom: Update the microcode files for Adreno a630 GPUs. 94120467 qcom: sdm845: rename the modem firmware 1c599488 qcom: sdm845: update remoteproc firmware 1cd1c871 rtl_bt: Update RTL8852A BT USB firmware to 0xDAC7_480D 55e74485 rtl_bt: Update RTL8852C BT USB firmware to 0x040D_7225 9dbd8ec2 amdgpu: DMCUB updates for various AMDGPU asics 9a47adc7 Merge branch 'mtl_huc_v8.5.0' of git://anongit.freedesktop.org/drm/drm-firmware eb3ae841 linux-firmware: update firmware for MT7922 WiFi device 5ce06b9e linux-firmware: update firmware for MT7921 WiFi device 2c50361c linux-firmware: update firmware for mediatek bluetooth chip (MT7922) 185f49df linux-firmware: update firmware for mediatek bluetooth chip (MT7921) 05f94af7 Merge branch 'v2.0.21478' of https://github.com/yunfei-mtk/linux_fw_scp 5de33fb4 i915: Add HuC v8.5.0 for MTL 795aea91 mediatek: Update mt8195 SCP firmware to support hevc fc90c59b Merge branch 'db410c' of https://github.com/lumag/linux-firmware 9d4c9a52 qcom: apq8016: add Dragonboard 410c WiFi and modem firmware 1f9667eb Merge branch 'for-upstream' of http://git.chelsio.net/pub/git/linux-firmware b544e2b0 Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware 244d6b5c cirrus: Add firmware for new Asus ROG Laptops d11ae984 brcm: Add symlinks from Pine64 devices to AW-CM256SM.txt 1c513ec7 amdgpu: Update GC 11.0.1 and 11.0.4 8449fcd0 Merge https://github.com/pkshih/linux-firmware c10facaf rtw89: 8851b: add firmware v0.29.41.0 1ba3519e Merge branch 'dev-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/firmware 2e775450 amdgpu: update yellow carp firmware for amd.5.5 release 5eccb3c1 amdgpu: update navi14 firmware for amd.5.5 release c70d3c3b amdgpu: update navi12 firmware for amd.5.5 release 0e4f17cc amdgpu: update vega20 firmware for amd.5.5 release 413348f3 amdgpu: update vega12 firmware for amd.5.5 release c167587d amdgpu: update navi10 firmware for amd.5.5 release 3c98630a amdgpu: update vega10 firmware for amd.5.5 release d13ef0cb amdgpu: update PSP 13.0.11 firmware for amd.5.5 release 31f8f526 amdgpu: update GC 11.0.4 firmware for amd.5.5 release f0ce7026 amdgpu: update SDMA 6.0.1 firmware for amd.5.5 release 47424464 amdgpu: update PSP 13.0.4 firmware for amd.5.5 release 60dc78a7 amdgpu: update GC 11.0.1 firmware for amd.5.5 release ba70041c amdgpu: update 13.0.8 firmware for amd.5.5 release 9c48881f amdgpu: update GC 10.3.7 firmware for amd.5.5 release bb4d7250 amdgpu: update vangogh firmware for amd.5.5 release 102a4138 amdgpu: update VCN 4.0.4 firmware for amd.5.5 release a7fe4aa1 amdgpu: update SMU 13.0.7 firmware for amd.5.5 release 80b2d561 amdgpu: update PSP 13.0.7 firmware for amd.5.5 release a5d7b4df amdgpu: update GC 11.0.2 firmware for amd.5.5 release c1db00c5 amdgpu: update renoir firmware for amd.5.5 release 683c91f7 amdgpu: update VCN 4.0.0 firmware for amd.5.5 release 39d6fcc7 amdgpu: update SMU 13.0.0 firmware for amd.5.5 release 56832557 amdgpu: update PSP 13.0.0 firmware for amd.5.5 release ffe1a41e amdgpu: update GC 11.0.0 firmware for amd.5.5 release 72d525d7 amdgpu: update green sardine firmware for amd.5.5 release ceba765d amdgpu: update beige goby firmware for amd.5.5 release 95eb53c9 amdgpu: update dimgrey cavefish firmware for amd.5.5 release 909cef98 amdgpu: update arcturus firmware for amd.5.5 release 91251d16 amdgpu: update vcn 3.1.2 firmware for amd.5.5 release 9eaff866 amdgpu: update psp 13.0.5 firmware for amd.5.5 release 44772528 amdgpu: update GC 10.3.6 firmware for amd.5.5 release 3bffc9f8 amdgpu: update navy flounder firmware for amd.5.5 release 3b920773 amdgpu: update sienna cichlid firmware for amd.5.5 release 84d5550e amdgpu: update aldebaran firmware for amd.5.5 release dcd30473 amdgpu: DMCUB updates for various AMDGPU asics c9e4034a ice: update ice DDP comms package to 1.3.40.0 601c1813 Merge https://github.com/pkshih/linux-firmware 08b854f0 rtlwifi: Add firmware v6.0 for RTL8192FU b72c69dd rtlwifi: Update firmware for RTL8188EU to v28.0 51290942 (tag: 20230515) Merge branch 'main' of https://github.com/CirrusLogic/linux-firmware Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit a5005508f069c9bd0c1d33970e9b3ecbe5040380)
* octeon: ubnt-edgerouter-4/6p: devicetree cleanupCarsten Spieß2023-07-153-30/+10
| | | | | | | | | | | removed redundant eeprom partition nodes from cn7130_ubnt_edgerouter-4.dts and cn7130_ubnt_edgerouter-6p.dts as they are identically defined in cn7130_ubnt_edgerouter-e300.dtsi. Signed-off-by: Carsten Spieß <mail@carsten-spiess.de> (integrated eeprom referenced node in the .dtsi) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 700f11aaadb7baa38285ed8f928e976a29a72eed)
* octeon: ubnt-edgerouter-e300: fix missing MTD partitionCarsten Spieß2023-07-151-16/+22
| | | | | | | | | | | | | | | The MAC addresses should be read from 3rd MTD partition, but only two MTD partitions are populated. To fix it, a partitions node has to surround the partition nodes in device tree. Tested with Edgerouter 6P Signed-off-by: Carsten Spieß <mail@carsten-spiess.de> (fixed checkpatch complains) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 2b1d7965c7e74e1b31ff29a966eaf6334b0d7057)
* octeon: ubnt-edgerouter-e300: fix LED settingsCarsten Spieß2023-07-151-2/+2
| | | | | | | | | | | | | | LEDs on Edgerouter 6P didn't work correctly: blue /white LED swapped, on/off state inverted Fixed in device tree: swap the GPIO ports for power:blue and power:white LEDs change LED activity from LOW to HIGH Tested on Edgerouter 6P Signed-off-by: Carsten Spieß <mail@carsten-spiess.de> (cherry picked from commit 9009672930f7bda99ec8f6f09a92eb49b6c9aac8)
* ib: split out processing user provided packagesTomasz Maciej Nowak2023-07-151-1/+3
| | | | | | | | | | Some device recipes remove default target packages. If user tries to add them back they will be ignored, since packages list is processed in one go. Process the device recipe packages first and do user ones later, so additions won't get filtered out. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (cherry picked from commit e40b9a7fa002154e85459791101a0444d99dfb86)
* sdk: rename README + update MakefileTomasz Maciej Nowak2023-07-152-1/+1
| | | | | | | | | | | | | 'help' target fails not finding a file, so follow up on a change[2] made as a fix for main README[1]. 1. d0113711a31f ("README: port to 21st century") 2. 751486b31fd9 ("build: fix README.md reference after rename") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (cherry picked from commit 2d5f7035cf45801158bed6f5d0ac0de0002c1810) (cherry picked from commit e9911f10e482f3174f745a36c0c9fd7964758caf) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* build: fix generation of large .vdi imagesAdones Pitogo2023-07-151-2/+8
| | | | | | | | | | | | Instead of loading the whole image into the memory when generating the sha256 sum, we load the file in chunks and update the hash incrementally to avoid MemoryError in python. Also remove a stray empty line. Fixes: #13056 Signed-off-by: Adones Pitogo <pitogo.adones@gmail.com> (mention empty line removal, adds Fixes from PR) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit bdb4b78210cfb6bc8a6cda62fc990dd45ec3054c)
* armsr: v8: fix NVMEM_IMX_OCOTP_ELE build errorChristian Lamparter2023-07-151-0/+1
| | | | | | | | | | | there's a new symbol NVMEM_IMX_OCOTP_ELE that needs to be defined. otherwise the build will fail: | i.MX On-Chip OTP Controller support (NVMEM_IMX_OCOTP_ELE) [N/m/y/?] (NEW) | make[6]: *** [scripts/kconfig/Makefile:77: syncconfig] Error 1 | make[5]: *** [Makefile:628: syncconfig] Error 2 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* bcm53xx: backport DT changes queued for v6.6Rafał Miłecki2023-07-1410-4/+450
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 37ff916af789911fdefb802ce9903e866eb82435)
* scripts/mkits.sh: DT overlays don't need a loadaddrDaniel Golle2023-07-131-7/+0
| | | | | | | | DT overlays do not need relocation in order to be applied, so drop defining the load address for dtbos. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit cff3786bd54cec8276f1fd08d5c6697846f393a5)
* uboot-mediatek: support classic uImage.FIT with internal images in imszbDaniel Golle2023-07-131-4/+3
| | | | | | | | | The side-effect and main motivation is to also drop the FIT structure size limit because with multiple device tree overlays it may easily grow beyond the previous 4kB limit in the future. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 98e3f82c3fb729c1d9de78fef215322528b50cb4)
* mediatek: replace hack for MaxLinear 2.5G PHYDaniel Golle2023-07-133-166/+63
| | | | | | | Replace hack with proper patch also for Linux 5.15. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 712fa3eff82086da8a13e7e5bc577df17892a581)
* mediatek: dts: mt7988a: remove boottrap hackDaniel Golle2023-07-131-5/+0
| | | | | | | | The PHY driver now uses regmap created from pio syscon, we no longer need the boottrap device. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit f321a49fd523a8d393be8e3cd2de41d67855da91)
* mediatek: use backported Ethernet PHY driver also for 5.15Daniel Golle2023-07-134-1345/+1417
| | | | | | | | Backport in-SoC Gigabit Ethernet PHY driver instead of carrying the driver in files-5.15. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 9fac59009657068d5a58b3d0255d4ca1507dd457)
* mediatek: dts: mt7988a: wire-up mediatek,pio for PHY LEDsDaniel Golle2023-07-132-1/+2
| | | | | | | | | | | The PHY driver needs to read a register containing the values of the bootstrap pins (which happen to be the PHY LEDs) to determine the LED polarities. Allow regmap access to first pinctrl bank by adding the 'syscon' compatible, and reference the pinctrl in the MDIO bus where the PHY driver will look for it. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 1f1e0b1144ebaa4ba8b948a12d989a0a6fc9b76f)
* mediatek: filogic: add H3C Magic NX30 Pro supportChukun Pan2023-07-135-0/+278
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: W25N01GVZEIG 128MB RAM: NT5CB128M16JR-FL 256MB Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, WPS Power: DC 12V 1A Flash instructions: 1. PC run command: "telnet 192.168.124.1 99" Username: H3C, password is the web login password of the router. 2. Download preloader.bin and bl31-uboot.fip 3. PC run command: "python3 -m http.server 80" 4. Download files in the telnet window: "wget http://192.168.124.xx/xxx.bin" Replace xx with your PC's IP and the preloader.bin and bl31-uboot.fip. 5. Flushing openwrt's uboot: "mtd write xxx-preloader.bin BL2" "mtd write xxx-bl31-uboot.fip FIP" 6. Connect to the router via the Lan port, set a static ip of your PC. (ip 192.168.1.254, gateway 192.168.1.1) 7. Download initramfs image, reboot router, waiting for tftp recovery to complete. 8. After openwrt boots up, perform sysupgrade. Note: 1. The u-boot-env partition on mtd is empty, OEM stores their env on ubi:u-boot-env. 2. Back up all mtd partitions before flashing. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit e78d1a06c8a47be9ea5a306bfb43f3d7ceb89646)
* uboot-mediatek: add H3C Magic NX30 Pro supportChukun Pan2023-07-133-0/+454
| | | | | | | | The OEM uboot limit brush into 3rd-party firmware. So add a custom uboot build to support openwrt. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit 437e79ad6d01100afac9786d287976de6d5cf363)
* mediatek: add support for Netgear EX6250v2 seriesWenli Looi2023-07-135-1/+281
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear EX6250v2, EX6400v3, EX6410v2, EX6470 are wall-plug 802.11ac (Wi-Fi 5) extenders. Like other MT7629 devices, Wi-Fi does not work currently as there is no driver. Related: https://github.com/openwrt/openwrt/pull/5084 For future reference, 2.4GHz MAC = LAN+1, 5GHz MAC = LAN+2. Specifications: * MT7629, 256 MiB RAM, 16 MiB SPI NOR * MT7761N (2.4GHz) / MT7762N (5GHz) - no driver * Ethernet: 1 port 10/100/1000 * UART: 115200 baud (labeled on board) Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. * After installation, perform a factory reset. Wait for the device to boot, then hold the reset button for 10 seconds. This is needed because sysupgrade in the stock firmware will attempt to preserve its configuration using sysupgrade.tgz. See https://github.com/openwrt/openwrt/pull/4182 Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> (cherry picked from commit 73de41898fcd06d837b013449c370c493bcdc595)
* image: add additional fields to Netgear encrypted imageWenli Looi2023-07-134-2/+26
| | | | | | | | | | | | | | | | | These fields are used for EAX12 and EX6250v2 series, and perhaps other devices. Compatibility is preserved with the WAX202 and WAX206. In addition, adds the related vars to DEVICE_VARS so that the variables work correctly with multiple devices. References in GPL source: https://www.downloads.netgear.com/files/GPL/EAX12_EAX11v2_EAX15v2_GPL_V1.0.3.34_src.tar.gz * tools/imgencoder/src/gj_enc.c Contains code that generates the encrypted image. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> (cherry picked from commit 0a1ebccc8702cadc50bc096f1e185472f3927786)
* ath79: DTS improvement for buzzer on RB951G-2HnDPavel Pernička2023-07-121-0/+6
| | | | | | | | | | | Mikrotik RB951 router has a buzzer on the board, which makes annoying noises due to the interference caused by PoE input or Wifi transmission when no GPIO pin state is set. I added buzzer node to device's DTS in order to set deault level to 1 and to provide easier access for it. Signed-off-by: Pavel Pernička <pernicka.pa@gmail.com> (cherry picked from commit dac0a133cf8dbf0bd9afabecdc1092456c451ec7)
* ath79: add support for MikroTik RB951G-2HnDMichał Kępień2023-07-125-0/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MikroTik RB951G-2HnD is a wireless SOHO router that was previously supported by the ar71xx target, see commit 7a709573d7 ("ar71xx: add kernel support for the Mikrotik RB951G board"). Specifications -------------- - SoC: Atheros AR9344 (600 MHz) - RAM: 128 MB (2x 64 MB) - Storage: 128 MB NAND flash (various manufacturers) - Ethernet: Atheros AR8327 switch, 5x 10/100/1000 Mbit/s - 1x PoE in (port 1, 8-30 V input) - Wireless: Atheros AR9340 (802.11b/g/n) - USB: 2.0 (1A) - 8x LED: - 1x power (green, not configurable) - 1x user (green, not configurable) - 5x GE ports (green, not configurable) - 1x wireless (green, not configurable) - 1x button (restart) Unlike on the RB951Ui-2HnD, none of the LEDs on this device seem to be GPIO-controllable, which was also the case for older OpenWRT versions that supported this board via a mach file. The Ethernet port LEDs are controlled by the switch chip. See https://mikrotik.com/product/RB951G-2HnD for more details. Flashing -------- TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedures at https://openwrt.org/toh/mikrotik/common. Signed-off-by: Michał Kępień <openwrt@kempniu.pl> (cherry picked from commit db02cecd6ad2e5962e6e9d8307da34855a083ad6)
* ath79: mikrotik: extract common bits for RB951x-2HnD devicesMichał Kępień2023-07-122-80/+83
| | | | | | | | | Mikrotik RouterBOARD 951Ui-2HnD and Mikrotik RouterBOARD RB951G-2HnD are very similar devices. Extract the DTS bits that are identical for these two boards to a separate DTSI file. Signed-off-by: Michał Kępień <openwrt@kempniu.pl> (cherry picked from commit c6ef4170945c6ab5432382110389f31fea92a76c)
* bcm53xx: backport DT changes from v6.5Rafał Miłecki2023-07-1125-9/+4634
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 8674b41c0d84f09e14bf8ebe08e1d6dc6ac5fa64)
* kernel: bgmac: fix regressed support for BCM53573 SoCsRafał Miłecki2023-07-101-0/+45
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d54f3b2cfdbd34aa61ca67fd590eebfdf3db51cf)
* bcm47xx: fix bgmac MTU patch filenameRafał Miłecki2023-07-101-0/+0
| | | | | | Fixes: 4970dd027bce ("bcm47xx: revert bgmac back to the old limited max frame size") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 83aeb0bbd47638b42ee6cdda351d0c51e014d790)
* kernel: backport NVMEM patches queued for the v6.5Rafał Miłecki2023-07-1013-1/+920
| | | | | | | This includes some driver changes and support for fixed cells layout. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 07bdc5551558287f7a99f6ae8e6d82d7d09d5781)
* kernel: net: phy: realtek: fix rtl822x_probe on unsupported devicesMartin Schiller2023-07-082-21/+5
| | | | | | | | | Calling rtl822x_probe() on phy devices which uses the rtl822x_read_mmd() and rtl822x_write_mmd() functions makes no sense and the probe ends with an EOPNOTSUPP error. Signed-off-by: Martin Schiller <ms@dev.tdt.de> (cherry picked from commit 5af7d47cd7fb936dc7d640e1ba63443152d0416a)
* ramips/mt7621: disable the cpufreq driverFelix Fietkau2023-07-081-7/+3
| | | | | | | It causes a noticeable performance decrease Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit dc38199b96ee3ef0ac52873893c42e28fa0564fa)
* kernel: sort generic configurationAleksander Jan Bajkowski2023-07-081-1/+1
| | | | | | | | | | | | | This was done by executing these commands: $ ./scripts/kconfig.pl '+' target/linux/generic/config-5.15 /dev/null > target/linux/generic/config-5.15-new $ mv target/linux/generic/config-5.15-new target/linux/generic/config-5.15 $ ./scripts/kconfig.pl '+' target/linux/generic/config-6.1 /dev/null > target/linux/generic/config-6.1-new $ mv target/linux/generic/config-6.1-new target/linux/generic/config-6.1 Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit 4f197f91342bc5e1f202c091c2c2f90e949d0749)
* kernel: bump 5.15 to 5.15.120John Audia2023-07-086-8/+8
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 0dc0504fc8e5f0c3cafe6c1da7192f51a09c5bc3)
* wolfssl: update to 5.6.3Nick Hainke2023-07-083-6/+31
| | | | | | | | | | | | | | | | Release Notes: - https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.0-stable - https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.2-stable - https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.3-stable Refresh patch: - 100-disable-hardening-check.patch Backport patch: - 001-fix-detection-of-cut-tool-in-configure.ac.patch Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 0e83b5e6cc8e2970905a2b32c990fa7491ff733c)
* kernel: fix KernelPackage when all KCONFIG are versionedJohn Thomson2023-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | If a kernel package was defined where all KCONFIG symbols were dynamic, and versioned, no FILES would be installed, as the foreach evaluation was providing the value of the variable defined by the KCONFIG symbol name including the version test Fix this by calling the version_filter function on the list of KCONFIG variable names run through by foreach Example, kernel 6.1: KCONFIG:=CONFIG_OLD@lt6.1 CONFIG_NEW@ge6.1 filter-out any KCONFIG settings forced by package: CONFIG_OLD@lt6.1 CONFIG_NEW@ge6.1 there are dynamic settings, so for each of them, get the value of the make variable defined by symbol name: CONFIG_OLD@lt6.1 is not set CONFIG_NEW@ge6.1 is not set versus CONFIG_OLD is not set CONFIG_NEW=m test if any of these are m, or y if yes, install files, otherwise, nothing to install Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> (cherry picked from commit b3448b3fdb59d25dce05991dc8f322c1020b090b)
* x86: set CONFIG_X86_AMD_PLATFORM_DEVICEJohn Audia2023-07-082-2/+2
| | | | | | | Needed by AMD processors using Carrizo and later chipsets Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 946100ba4128dbee8faf3c03afb692bca74d75fa)
* mxs: rework image generationZoltan HERPAI2023-07-066-103/+65
| | | | | | | | Migrate to "new" image generation method. Device profiles will be generated based on image/Makefile instead of profiles/ , which will also allow to automatically build images for all supported devices via buildbot. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ipq-wifi: fix upstream board-2.bin ZTE M289F snafuChristian Lamparter2023-07-042-2/+4
| | | | | | | | | | | | | | | | | | | | | The upstream board-2.bin file in the linux-firmware.git repository for the QCA4019 contains a packed board-2.bin for this device for both 2.4G and 5G wifis. This isn't something that the ath10k driver supports. Until this feature either gets implemented - which is very unlikely -, or the upstream boardfile is mended (both, the original submitter and ath10k-firmware custodian have been notified). OpenWrt will go back and use its own bespoke boardfile. This unfortunately means that 2.4G and on some revisions the 5G WiFi is not available in the initramfs image for this device. Fixes: #12886 Reported-by: Christian Heuff <christian@heuff.at> Debugged-by: Georgios Kourachanis <geo.kourachanis@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 75505c5ec724b9b961dcb411bac1d4b9aede3e1d)
* mt76: update to the latest versionFelix Fietkau2023-07-041-3/+3
| | | | | | | f704e4f83c6f mt76: mt7915: fix copy&paste issue on capability check rework Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 816933bee6e6b68156f6aeea083117208bf859f8)
* ramips: mt7621: add TP-Link EAP613 v1Sander Vanheule2023-07-034-0/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TP-Link EAP613 v1 is a ceiling-mount 802.11ax access point. It can be powered via PoE or a DC barrel connector (12V). Connecting to the UART requires fine soldering and careful manipulation of any soldered wires. Device details: * SoC: MT7621AT * Flash: 16 MiB SPI NOR * RAM: 256 MiB DDR3L * Wi-Fi: * MT7905DA + MT7975D: 2.4 GHz + 5 GHz (DBDC), 2x2:2 * Two stamped metal antennas (ANT1, ANT2) * One PCB antenna (ANT3) * One unpopulated antenna (ANT4) * Ethernet: * 1× 10/100/1000 Mbps port with PoE * LEDs: * Array of four blue LEDs with one control line * Buttons: * Reset * Board test points: * UART: next to CPU RF-shield and power circuits * JTAG: under CPU RF-shield (untested) * Watchdog: 3PEAK TPV706 (not implemented) Althought three antennas are populated, the MT7905DA does not support the additional Rx chain for background DFS detection (or Bluetooth) according to commit 6cbcc34f50a3 ("ramips: disable unsupported background radar detection"). MAC addresses: * LAN: 48:22:54:xx:xx:a2 (device label) * WLAN 2.4 GHz: 48:22:54:xx:xx:a2 * WLAN 5 GHz: 48:22:54:xx:xx:a3 The radio calibration blob stored in flash also contains valid MAC addresses for both radio bands (OUI 00:0c:43). Factory install: 1. Enable SSH on the device via web interface 2. Log in with SSH, and run `cliclientd stopcs` 3. Upload -factory.bin image via web interface. It may be necessary to shorten the filename of the image to e.g. 'factory.bin'. Recovery: 1. Open the device by unscrewing four screws from the backside 2. Carefully remove board from the housing 3. Connect to UART (3.3V): * Find test points labelled "VCC", "GND", "UART_TX", "UART_RX" * Solder wires to test points or connect otherwise. Be careful not to damage the PCB e.g. by pulling on soldered wires. * Open console with 115200n8 settings 4. Interrupt bootloader and use tftpboot to start an initramfs: setenv ipaddr $DEVICE_IP setenv serverip $SERVER_IP tftpboot 84000000 openwrt-initramfs-kernel.bin bootm DO NOT use saveenv to store modified u-boot environment variables. The environment is saved at flash offset 0x30000, which erases part of the (secondary) bootloader. The device uses two bootloader stages. The first stage will load the second stage from a uImage stored at flash offset 0x10000. In case of a damaged second stage, the first stage should allow uploading a new image via y-modem (untested). Signed-off-by: Sander Vanheule <sander@svanheule.net> (cherry picked from commit 11588c52b47c2c3b2cdc7849ce9e4804bfdb8bb5)
* firmware-utils: bump to git HEADSander Vanheule2023-07-031-3/+3
| | | | | | | | | | | Add support for a number of new TP-Link devices. 9e2de8515be1 tplink-safeloader: add EAP610 v3 and EAP613 v1 bb12cf5c3fa9 tplink-safeloader: Add support for TP-Link Deco M5 a2d49fb1e188 tplink-safeloader: add RU support-list entry for Archer C6U v1 Signed-off-by: Sander Vanheule <sander@svanheule.net> (cherry picked from commit 0cdcf0338290a83d7679005e80cf7f547860bfc5)
* mediatek: define NMBM management region for WAX220David Bauer2023-07-021-0/+5
| | | | | | | | | The NETGEAR WAX220 employs NMBM on SPI-NAND. In order to avoid dealing with invalid factory data, enable NMBM in the area preceding the UBI volume. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 92eec257dd562547bc08ee76c1901eb22b66937c)
* libnl-tiny: update to latest git HEADHauke Mehrtens2023-07-021-3/+3
| | | | | | | d433990 Make struct nla_policy and struct nlattr const Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 513bcfdf78d7ffbcf244da2e6910a3d04b17ae01)
* linux-firmware: ibt-firmware: install sfi/ddc files for AX210 cardMathew McBride2023-07-022-1/+3
| | | | | | | | | | | | | | | | | | | When using an Intel AX210 card, the Bluetooth hci interface failed to start due to a missing "ibt-0041-0041.sfi" file. Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-0041-0041.sfi (-2) A device specific configuration file (DDC) is also required: Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi Bluetooth: hci0: Waiting for firmware download to complete ... Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc Bluetooth: hci0: Applying Intel DDC parameters completed Bluetooth: hci0: Firmware timestamp 2023.13 buildtype 1 build 62562 Fixes: #8558 Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit fff6833d4c01205156f9431a111a51f96642b476)
* generic: filter out CONFIG_FRAME_WARNRobert Marko2023-07-021-0/+1
| | | | | | | | | | | | | | CONFIG_FRAME_WARN value is set by config/Config-kernel.in based on the target type dynamically since commit: 16a2051 ("kernel: Set CONFIG_FRAME_WARN depending on target"). However, CONFIG_FRAME_WARN was not set to get filtered out so it ended up in multiple target configs during refreshes. So, lets filter out CONFIG_FRAME_WARN as its set dynamically to prevent it ending up in more target configs. Signed-off-by: Robert Marko <robert.marko@sartura.hr> (cherry picked from commit 7a9a4168bb7f4b77c300afb99c163c793305e84f)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 04:42:21 +0000