aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: add missing LEDs to Asus RT-AX53UMarian Sarcinschi2023-01-043-3/+19
| | | | | | | | | | | | | | | | This patch adds the missing LEDs to Asus RT-AX53U. Based on PR #10400 and patch provided in #11068 - enable the two LEDs controlled by mt7915e for wireless; - add label to power LED so it works properly and fix formatting; - add the USB LED; - switch LEDs are best left to be controlled by hardware for now. Co-Authored-By: Ivan Rozhuk <rozhuk.im@gmail.com> Co-Authored-By: Shiji Yang <yangshiji66@qq.com> Co-Authored-By: Hartmut Birr <e9hack@gmail.com> Tested-by: Felix Baumann <felix.bau@gmx.de> Tested-by: Marian Sarcinschi <znevna@gmail.com> Signed-off-by: Marian Sarcinschi <znevna@gmail.com>
* CI: build: fix external toolchain use with release tag testsChristian Marangi2023-01-041-1/+1
| | | | | | | | | | | | | | When a new tag for a release is created, the just checkout repo from github actions will already have such tag locally created. This will result in git fetch --tags failing with error rejecting the remote tag with (would clobber existing tag). Add -f option to overwrite any local tags and always fetch them from remote. Fixes: e24a1e6f6d7f ("CI: build: add support for external toolchains from stable branch") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: fix wlan mac address for Aruba AP-303HBjoern Dobe2023-01-041-4/+6
| | | | | | | | | | | Assigns the correct mac address from nvmen to the wlan interfaces. This Mac address corresponds to the label "Wireless MAC" on the device and the stock firmware. Removes duplicate entry of calibration variant for both radios. Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjoern Dobe <bjoern@dobecom.de>
* generic: 5.15: backport qca8k fixup for mgmt and mdio read/writeChristian Marangi2023-01-045-0/+531
| | | | | | | | Backport qca8k fixup for mgmt and mdio read/write for kernel 5.15 fixup port dropping and configuration issue. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* generic: 5.10: backport Treat IPv4 segment's lowest address as unicastSeth David Schoen2023-01-041-0/+32
| | | | | | | | | | | | | | | | | | | Backport patch from kernel 5.14. Treat only the highest, not the lowest, IPv4 address within a local subnet as a broadcast address, as subnets do not need two different broadcast addresses and networking documentation consistently prefers the highest address as broadcast. This patch was merged in upstream net-next tree in May 2021 at https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=94c821c74bf5 This eventually frees up one address per subnet. It matches behavior suggested in our Internet-Draft, and also the default behavior of OpenBSD and FreeBSD. Signed-off-by: Seth David Schoen <schoen@loyalty.org>
* kernel: bump 5.15 to 5.15.86John Audia2023-01-0355-226/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.15/101-Use-stddefs.h-instead-of-compiler.h.patch[1] ipq806x/patches-5.15/122-01-clk-qcom-clk-krait-fix-wrong-div2-functions.patch[2] bcm27xx/patches-5.15/950-0198-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch[3] Manually rebased: ramips/patches-5.15/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch[4] Added patch/backported: ramips/patches-5.15/107-PCI-mt7621-Add-sentinel-to-quirks-table.patch[5] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=c160505c9b574b346031fdf2c649d19e7939ca11 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=a051e10bfc6906d29dae7a31f0773f2702edfe1b 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=ec1727f89ecd6f2252c0c75e200058819f7ce47a 4. Quilt gave this output when I applied the patch to rebase it: % quilt push -f Applying patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch patching file arch/mips/ralink/Kconfig patching file drivers/pci/controller/Kconfig patching file drivers/pci/controller/Makefile patching file drivers/staging/Kconfig patching file drivers/staging/Makefile patching file drivers/staging/mt7621-pci/Kconfig patching file drivers/staging/mt7621-pci/Makefile patching file drivers/staging/mt7621-pci/TODO patching file drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt patching file drivers/staging/mt7621-pci/pci-mt7621.c Hunk #1 FAILED at 1. Not deleting file drivers/staging/mt7621-pci/pci-mt7621.c as content differs from patch 1 out of 1 hunk FAILED -- saving rejects to file drivers/staging/mt7621-pci/pci-mt7621.c.rej patching file drivers/pci/controller/pcie-mt7621.c Applied patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch (forced; needs refresh) Upon inspecting drivers/staging/mt7621-pci/pci-mt7621.c.rej, it seems that the original patch wants to delete drivers/staging/mt7621-pci/pci-mt7621.c but upstream's version was not an exact match. I opted to delete that file. 5. Suggestion by hauke: https://github.com/torvalds/linux/commit/19098934f910b4d47cb30251dd39ffa57bef9523 "This patch is in upstream kernel, but it was backported to the old staging driver in kernel 5.15." Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* oxnas: sata_oxnas: use ata_link_errRobert Marko2023-01-031-1/+1
| | | | | | | | | | | | | | Kernel 5.15.86 has backported ("ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros") and this is now causing compilation errors for oxnas SATA driver due to usage of ata_link_printk(). Upstream has migrated to using the appropriate ata_link_{err, warn, notice, info} calls a while ago so its not affected. Lets do the same for oxnas SATA driver and use ata_link_err() instead of ata_link_printk(). Signed-off-by: Robert Marko <robimarko@gmail.com>
* octeontx: add 5.15 testing kernelNick Hainke2023-01-033-14/+24
| | | | | | | | | | Add 5.15 as testing. Refreshed: - 0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
* octeontx: 5.15: copy configNick Hainke2023-01-032-0/+471
| | | | | | Copy config from kernel 5.10 to kernel 5.15. Signed-off-by: Nick Hainke <vincent@systemli.org>
* zynq: add 5.15 testing kernelNick Hainke2023-01-032-10/+14
| | | | | | | | Enable testing kernel. Reviewed-by: Luis Araneda <luaraneda@gmail.com> Tested-by: Luis Araneda <luaraneda@gmail.com> (Digilent Zybo Z7-20) Signed-off-by: Nick Hainke <vincent@systemli.org>
* zynq: 5.15: copy configNick Hainke2023-01-031-0/+548
| | | | | | Copy config from kernel 5.10 to kernel 5.15. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq40xx: delete files used for building 5.10 kernelNick Hainke2023-01-0325-2442/+0
| | | | | | | The kernel 5.15 now defaults. Remove unnecessary files. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
* bridger: update to the latest versionFelix Fietkau2023-01-031-3/+3
| | | | | | | | | def7755c459d add missing copyright headers f68307fd96d7 add hairpin mode support 9ee8f433ba4e nl: do not pass NDA_VLAN with vid=0 978c1f9eed07 add support for the bridge port isolated flag Signed-off-by: Felix Fietkau <nbd@nbd.name>
* realtek: Migrate to libdeflateOlliver Schinagl2023-01-023-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Libdeflate is a more advanced gzip compressor, which allows for faster decompression, higher compression speed (factor 3-4), while being fully gzip compatible. Some comparison gzip | libdeflate-gzip | delta | image [openwrt-realtek-rtl839x-*] --------+-----------------+--------+----------------------------------------------- 6589174 | 6298794 | 290380 | d-link_dgs-1210-52-initramfs-kernel.bin 6291632 | 6029488 | 262144 | d-link_dgs-1210-52-squashfs-factory_image1.bin 6292270 | 6030128 | 262142 | d-link_dgs-1210-52-squashfs-sysupgrade.bin 6589142 | 6298760 | 290382 | zyxel_gs1900-48-initramfs-kernel.bin 6292264 | 6030122 | 262142 | zyxel_gs1900-48-squashfs-sysupgrade.bin and changing lzma to (libdeflate-)gzip on existing rtl930x target: gzip | libdeflate-gzip | delta | image [openwrt-realtek-rtl930x-*] --------+-----------------+--------+-------------------------------------- 6816230 | 6510382 | 305848 | zyxel_xgs1250-12-initramfs-kernel.bin Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Reviewed-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Sander Vanheule <sander@svanheule.net>
* tools: Add gzip-libdeflate advanced compressorMarkus Stockhausen2023-01-023-0/+38
| | | | | | | | | | | | | | | | | Several devices provide U-Boot versions with only gzip compressed kernel support (e.g. Realtek switches). This compression method produces larger images than lzma. To save space on flash and avoid going the hard way with lzma-loader we can make use of enhanced gzip tool based on libdeflate compression library from https://github.com/ebiggers/libdeflate. It keeps 100% deflate/gzip compatibility while improving compression ratio. The image can be unpacked by the default inflate routines inside U-Boot. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [Switched to v1.15 and made it work with cmake] Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Reviewed-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Sander Vanheule <sander@svanheule.net>
* realtek: Disable boston clockOlliver Schinagl2023-01-018-8/+4
| | | | | | | We are not on the 'boston' platform so no point in having that clock driver enabled. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* treewide: Trigger reinstall of all wolfssl dependenciesHauke Mehrtens2023-01-014-4/+4
| | | | | | | | The ABI of the wolfssl library changed a bit between version 5.5.3 and 5.5.4. This release update will trigger a rebuild of all packages which are using wolfssl to make sure they are adapted to the new ABI. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: update to 5.5.4-stableNick Hainke2023-01-013-36/+3
| | | | | | | | | | | | | Remove upstreamed: - 001-Fix-enable-devcrypto-build-error.patch Refresh patch: - 100-disable-hardening-check.patch Release notes: https://github.com/wolfSSL/wolfssl/releases/tag/v5.5.4-stable Signed-off-by: Nick Hainke <vincent@systemli.org>
* toolchain/binutils: switch to version 2.39 by defaultHauke Mehrtens2023-01-012-2/+2
| | | | | | | | | | | | | | | | This was build tested with all core packages on all targets successfully. This was run tested on the following systems: * lantiq/xrx200 musl * sunxi/cortex53 musl * x86/64 musl * x86/64 glibc Some trusted firmware arm builds needed some fixes to build with binutils 2.39, this was merged before. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/binutils: backport stable patchesHauke Mehrtens2022-12-3111-0/+1260
| | | | | | | | | | | | Add the patches with real changes from the binutils 2.39 stable branch. I am not aware that we ran into any of these problems, but I think it is better to take the existing stable patches. They were exported like this: git format-patch binutils-2_39...origin/binutils-2_39-branch I removed the patches changing the version numbers only. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tfa-layerscape: Use trusted-firmware-a.mkHauke Mehrtens2022-12-312-84/+69
| | | | | | | | This converts the trusted firmware arm build Makefile to make use of the common trusted-firmware-a.mk file. This also fixes the build with binutils 2.39. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-mvebu: Use host flags for cryptest compilationHauke Mehrtens2022-12-312-0/+15
| | | | | | | | | Without these changes it used the system LDFLAGS for the compilation of the cryptopp library. This does not always work when we add "-no-warn-rwx-segments" which is done to support binutils 2.39 inside of OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-sunxi: Use common trusted-firmware-a.mkHauke Mehrtens2022-12-312-39/+27
| | | | | | | Make use of the definitions from trusted-firmware-a.mk to build the Trusted firmware arm. This fixes the build with binutils 2.39. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: sysupgrade: allow flashing Linksys factory firmwareTony Ambardar2022-12-311-0/+18
| | | | | | | | | | | | | | | | | Allow forced flashing of a factory firmware image, after checking for the correct FIT magic header and Linksys board-specific footer. Details of the footer are already described in scripts/linksys-image.sh. This is convenient as it avoids using a TFTP server or OEM GUI, and allows restoring OEM firmware or installing a "breaking" OpenWrt update (e.g DSA migration and kernel repartition) directly from the command line. Devices supported at this time include EA6350v3, EA8300, MR8300 and WHW01. Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Wyatt Martin <wawowl@gmail.com> # WHW01 Tested-by: Tony Ambardar <itugrok@yahoo.com> # EA6350v3 Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* base-files: stage2: add 'tail' to sysupgrade environmentTony Ambardar2022-12-311-1/+1
| | | | | | | This is used to access footer data in firmare files, and is simpler and less error-prone than using 'dd' with calculated offsets. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq40xx: migrate Linksys WHW01 to DSA and re-enableTony Ambardar2022-12-313-2/+22
| | | | | | | | | Convert Linksys WHW01 network configuration to DSA and re-enable builds. Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Wyatt Martin <wawowl@gmail.com> Signed-off-by: Wyatt Martin <wawowl@gmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq40xx: fix up Linksys WHW01 board name, device definitionTony Ambardar2022-12-315-12/+9
| | | | | | | | | | | | | | Update the board name defined in DTS to match online documentation and the name encoded into factory firmware. This helps supports flashing firmware factory images using 'sysupgrade'. Original WHW01 device definition assumes the rootfs IMAGE_SIZE is 33 MB instead of the correct 74 MB, and defines factory images which include extra adjustments/padding that do not match OEM factory images and may cause problems flashing. Update image size and build recipe to fix these. Suggested-by: Wyatt Martin <wawowl@gmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ipq40xx: re-enable EA6350v3, EA8300, MR8300 buildsTony Ambardar2022-12-314-23/+38
| | | | | | | | | | | | | | | | | | | | | | | | | Raise the kernel size from 3 MB to 5 MB for EA6350v3, EA8300 and MR8300, and correspondingly reduce the rootfs size by 2 MB: * modify partition definitions in related .dts files * modify device kernel/image sizes in generic.mk Update to compat-version 2.0 to force factory image usage on sysupgrade, noting the current version 1.1 is an unreleased update for DSA migration. Also update the compat-version message, explaining the need to run one of the following console commands to update U-Boot's kernel-size variable before flashing the OpenWrt factory image. fw_setenv kernsize 500000 # (OpenWrt command line) setenv kernsize 500000 ; saveenv # (U-Boot serial console) Finally, re-enable the 3 devices. Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Nicolas TORMO <badulesia.granieri@gmail.com> # MR8300 Tested-by: Tony Ambardar <itugrok@yahoo.com> # EA6350v3 Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* mbedtls: update to version 2.28.2Hauke Mehrtens2022-12-312-6/+6
| | | | | | | | | | | | | | | | | | | Changelog: https://github.com/Mbed-TLS/mbedtls/releases/tag/v2.28.2 This release of Mbed TLS provides bug fixes and minor enhancements. This release includes fixes for security issues. Fixes the following CVEs: * CVE-2022-46393: Fix potential heap buffer overread and overwrite in DTLS if MBEDTLS_SSL_DTLS_CONNECTION_ID is enabled and MBEDTLS_SSL_CID_IN_LEN_MAX > 2 * MBEDTLS_SSL_CID_OUT_LEN_MAX. * CVE-2022-46392: An adversary with access to precise enough information about memory accesses (typically, an untrusted operating system attacking a secure enclave) could recover an RSA private key after observing the victim performing a single private-key operation if the window size used for the exponentiation was 3 or smaller. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: fix receiving multicast packets on multiple sta interfacesFelix Fietkau2022-12-301-26/+30
| | | | | | Also fix MLO sta sdata link initialization Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm47xx: replace "Devices-database-update-patch" with upstream patchesNick Hainke2022-12-307-268/+428
| | | | | | | | | | | | | Replace "320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch" with upstream patches: - 320-v5.17-MIPS-BCM47XX-Add-board-entry-for-Linksys-WRT320N-v1.patch - 321-v5.17-MIPS-BCM47XX-Add-support-for-Netgear-R6300-v1.patch - 322-v5.17-MIPS-BCM47XX-Add-support-for-Netgear-WN2500RP-v1-v2.patch - 323-v6.0-MIPS-BCM47XX-Add-support-for-Netgear-WNR3500L-v2.patch - 324-v5.17-MIPS-BCM47XX-Add-LEDs-and-buttons-for-Asus-RTN-10U.patch - 325-v5.17-MIPS-BCM47XX-Define-Linksys-WRT310N-V2-buttons.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* bcm47xx: add tags to upstreamed patchesNick Hainke2022-12-309-0/+0
| | | | | | All of the mtd patches are upstreamed to 5.18. Add tags indicating this. Signed-off-by: Nick Hainke <vincent@systemli.org>
* netifd: update to the latest versionFelix Fietkau2022-12-301-3/+3
| | | | | | | | | | | | 2cffe0c44e62 treewide: correctly apply IFNAMSIZ limit 96bcbb2e4eb6 wireless: allow set_retry ubus notify command to trigger a wdev restart a2e8cd75dbf6 wireless: add support for disabling multicast-to-unicast per virtual interface e9f44189ade7 system: move netdev types to system-linux.c where they are used a3fab0119ef1 utils: include utils.h last 7ce73fc16765 vlandev: propagate topology changes 81c1fbcba2f2 device: fix vlan device issues with disappearing lower devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* CI: labeler: Add target label to target packagesHauke Mehrtens2022-12-301-0/+29
| | | | | | | | This adds the target label also to changes in packages which are target specific like the boot loader of a target or some drivers which are only use on one target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: enable BBT on NAND in I-O DATA devicesINAGAKI Hiroshi2022-12-302-0/+10
| | | | | | | | | | | This patch enables MediaTek NAND BBT on I-O DATA devices manufactured by MSTC (MitraStar Technology Corp.). [WN-AX2033GR] Tested-by: Yanase Yuki <dev@zpc.sakura.ne.jp> [WN-AX1167GR2, WN-DX1167R, WN-DX1200GR, WN-DX2033GR] Tested-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mediatek: drop redmi-ax6000 variant with modified envChuanhong Guo2022-12-305-61/+0
| | | | | | | | | | | | | | | | | | | This variant uses xiaomi factory u-boot and modified u-boot-env & bootcmd. By modifying uboot-env, the xiaomi firmware recovery provided in the vendor u-boot doesn't work anymore. It's possible to put u-boot into a state where it refuese to take any serial input. If the u-boot is in this state, users can't restore their firmware without taking the flash off the board. We now have a -stock variant where the vendor u-boot is used in a way that xiaomi firmware recovery still works, and a -ubootmod variant where we get rid of all xiaomi components, have more usable space and no uart console lock. These two should cover all use cases and we don't need this variant anymore. Drop this redmi-ax6000 variant. Existing users of this variant should perform a u-boot mod or restore to the -stock layout. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: Refresh patchesHauke Mehrtens2022-12-291-2/+2
| | | | | | The patch was not applying cleanly any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tree-wide: Do not use package librt and libpthreadHauke Mehrtens2022-12-297-16/+6
| | | | | | | | | | | The libraries libpthread, libdl, libutil, libanl have been integrated into the libc library in version 2.34. it is not needed to explicitly link them any more. Most of the functions have been moved from the librt.so into libc.so some time ago already. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: convert Aruba AP-303H to DSA and enable target againNick Hainke2022-12-293-2/+34
| | | | | | | | | The target was disabled since noone did the DSA conversion. Add the conversion and enable it again. Tested-by: John Walshaw <jjw@myself.com> Signed-off-by: Bjoern Dobe <bjoern@dobecom.de> Signed-off-by: Nick Hainke <vincent@systemli.org>
* mpc85xx: change CPU_TYPE from 8540 to 8548Šimon Bořek2022-12-291-1/+1
| | | | | | | | | | | | | | | | | | All subtargets as p1010, p1020, p2020 uses e500v2 cores [1] [2] [3] [4], so let's force cpu type to 8545 for all mpc85xx target even though there might exist device with e500v1, but there is no such router supported in OpenWrt and because of that it does not make sense to to set CPU_TYPE for each subtarget. All MPC85xx SoC can be found here: https://www.nxp.com/products/processors-and-microcontrollers/legacy-mpu-mcus/powerquicc-processors:POWERQUICC_HOME#powerquicc-iii-mpc85xx [1] https://www.nxp.com/docs/en/application-note/AN2807.pdf [2] https://www.nxp.com/docs/en/fact-sheet/QP1010FS.pdf [3] https://www.nxp.com/docs/en/product-brief/P1020PB.pdf [4] https://www.nxp.com/docs/en/fact-sheet/QP20XXFS.pdf Co-authored-by: Pali Rohár <pali@kernel.org> Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
* mpc85xx: add support for cpu type 8548Šimon Bořek2022-12-291-0/+1
| | | | | | | | | | | | 8540 cpu type corresponds to e500v1 core while 8548 cpu type corresponds to e500v2 core See https://www.nxp.com/products/processors-and-microcontrollers/legacy-mpu-mcus/powerquicc-processors:POWERQUICC_HOME#powerquicc-iii-mpc85xx and https://www.nxp.com/docs/en/application-note/AN2807.pdf . Co-authored-by: Josef Schlehofer <josef.schlehofer@nic.cz> Co-authored-by: Pali Rohár <pali@kernel.org> Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
* linux-firmware: disable strippingRobert Marko2022-12-291-1/+4
| | | | | | | | | | | It has been brought to my attention that recently added WCN6855 firmware is broken as it is getting stripped during building due to being 2 ELF binaries. I am sure WCN6750 and any other ELF binaries are having the same issue, so since stripping firmware binaries is clearly unwanted disable it. Fixes: b4d3694f81f4 ("linux-firmware: package ath11k consumer cards firmware") Signed-off-by: Robert Marko <robimarko@gmail.com>
* uboot-mediatek: add support for Xiaomi Redmi Router AX6000Furong Xu2022-12-293-0/+412
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot flash instructions: 0. OpenWrt U-Boot does not support stock layout, it comes with recovery boot support, automatic tftp recovery and never blocks UART. A new flash layout is introduced, we call it OpenWrt U-Boot layout, stock flash layout and the old OpenWrt layout are not supported. During the whole flash procedure, please do not reboot or power off unless requested explicitly, or you will break your device. 1. Your device should already running OpenWrt. If not, follow the instructions to flash OpenWrt: https://github.com/openwrt/openwrt/pull/11115 2. Backup BL2 Nvram Bdata Factory and FIP in case you break something or in case you want to go back to stock firmware one day. cat /dev/mtdblock0 > /tmp/BL2.bin cat /dev/mtdblock1 > /tmp/Nvram.bin cat /dev/mtdblock2 > /tmp/Bdata.bin cat /dev/mtdblock3 > /tmp/Factory.bin cat /dev/mtdblock4 > /tmp/FIP.bin And save all whose bin files to somewhere safe. Then backup your configurations, since ubiformat for entire mtd device is required to create new ubootenv volume for OpenWrt U-Boot. 3. Run the following cmd to boot into an initramfs with the new OpenWrt U-Boot layout that expand ubi partion to the end of flash: ubiformat /dev/mtd7 -y -f /tmp/ax6000-ubootmod-initramfs-factory.ubi 4. After boot into initramfs, check mtd partion info. The ubi partion should be mtd5 root@OpenWrt:~# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 BL2 mtd1: 00040000 00020000 Nvram mtd2: 00040000 00020000 Bdata mtd3: 00200000 00020000 Factory mtd4: 00200000 00020000 FIP mtd5: 07a80000 00020000 ubi 5. Load kmod-mtd-rw to temporarily make the bootloader partions writable. The kmod-mtd-rw is from the feeds, it is not packed in initramfs-factory by default. To install kmod-mtd-rw via opkg: opkg update && opkg install kmod-mtd-rw Or, download kmod-mtd-rw.ipk from OpenWrt server and install it manually e.g: https://downloads.openwrt.org/snapshots/targets/mediatek/filogic/kmods/ Select your OpenWrt release version and kernel version accordingly. Load kmod-mtd-rw: insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1 6. Run the following cmd to clean all pending crash dumps in pstore, or OpenWrt U-Boot may boot into NAND recovery or tftp recovery. rm -f /sys/fs/pstore/* 7. Format ubi and create new ubootenv volume: ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5 ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB 8. This is optional. Skip this if you do not want to have NAND recovery boot feature offered by OpenWrt U-Boot. Don't worry, you always have automatic tftp recovery feature enabled. ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB ubiupdatevol /dev/ubi0_2 /tmp/ax6000-ubootmod-initramfs-recovery.itb 9. Now, flash new U-Boot. Bye-bye ugly stock U-Boot. mtd write /tmp/ax6000-ubootmod-preloader.bin BL2 mtd write /tmp/ax6000-ubootmod-bl31-uboot.fip FIP 10. Flash the squashfs-sysupgrade.bin as usual: sysupgrade -n /tmp/ax6000-ubootmod-squashfs-sysupgrade.itb Enjoy! Signed-off-by: Furong Xu <xfr@outlook.com>
* mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-BootFurong Xu2022-12-298-20/+92
| | | | | | | | | This new layout is only bootable with OpenWrt U-Boot. It reuses the two crash partions and expands the ubi partion to the end of whole flash. Do not use this layout with stock U-Boot! Signed-off-by: Furong Xu <xfr@outlook.com>
* realtek: deduplicate GS1900 recipesSander Vanheule2022-12-283-23/+18
| | | | | | | | | | ZyXEL GS1900 devices with SoCs from both the RTL838x and RTL839x families share the same image structure and size of the firmware partition. Additionally, the GS1900-48 recipe provided a parameter for the zyxel-vers command, but this parameter is not used. Deduplicate the recipes by moving it to target/linux/realtek/image/common.mk. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: fix GS1900-48 firwmare partitionSander Vanheule2022-12-283-5/+5
| | | | | | | | | | The listed partition size doesn't match the original partition size, and actually overlaps with the following partition. The partition node name for the "firmware" partition also has an extra 'b' compared to the partition offset. Fixes: 47f5a0a3eed5 ("realtek: Add support for ZyXEL GS1900-48 Switch") Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: fix ZYXELS_VERS for GS1900-48Sander Vanheule2022-12-281-1/+1
| | | | | | | | | | | | | | | | | The GS1900-48 firmware image is identified by the 'AAHN' ID, while the GS1900-48HP is identified by 'AAHO' [1]. The latter was used, resulting in the following error message when upgrading via the stock web UI: Device only can support firmware from V1.00(AAHN.0) and later version Fix image generation by using the correct ID. [1] https://download.zyxel.com/GS1900-48/firmware/GS1900-48_2.70(AAHN.3)C0_2.pdf Link: https://forum.openwrt.org/t/146533 Fixes: 47f5a0a3eed5 ("realtek: Add support for ZyXEL GS1900-48 Switch") Suggested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: fix default image generationSander Vanheule2022-12-281-3/+3
| | | | | | | | | | | | While cleaning up the makefiles for the realtek target, the order of the default image generating commands was accidentally changed. This caused the image signature to end up somewhere in the middle, misaligning the rootfs. As a result, sysupgrade couldn't verify upgrade images anymore, and devices end up in a boot loop due to the unaligned (and not found) rootfs. Fixes: 94d8b4852b9f ("realtek: Cleanup Makefiles") Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: fix calibration-art for some boardsNick Hainke2022-12-281-4/+4
| | | | | | | | | "0x1000" looks suspicious. By looking at data provided by @DragonBluep I was able to identify the correct size for AR9380, AR9287 WiFis. Furthermore, PowerCloud Systems CAP324 has a AR9344 WiFi. Signed-off-by: Nick Hainke <vincent@systemli.org>
* linux-firmware: ath11k: add symlink for WCN6855 hw2.1Robert Marko2022-12-282-1/+2
| | | | | | | | WCN6855 exists in 2 HW revisions, but both use the same FW so upstream just has a symlink for hw2.1 to hw2.0 that I forgot to make. Fixes: b4d3694f81f4 ("linux-firmware: package ath11k consumer cards firmware") Signed-off-by: Robert Marko <robimarko@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 18:06:50 +0000