aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: add support for Yuncore A930Thibaut VARÈNE2022-04-153-0/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - QCA9533 (650 MHz), 64 or 128MB RAM, 16MB SPI NOR - 2x 10/100 Mbps Ethernet, with 802.3at PoE support (WAN) - 2T2R 802.11b/g/n 2.4GHz Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Clemens Hopfer <openwrt@wireloss.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* mac80211 adjust QCA9561 PA biasThibaut VARÈNE2022-04-151-0/+18
| | | | | | | | | | | | | | | ath9k is setting the TX PA DC bias level different on QCA9561 and QCA9565 although they have the same radio IP-core, which results in a very low output power and very low throughput as devices are further away from the AP (compared to other 2.4GHz APs.) In real life testing, without this patch the 2.4GHz throughput on Yuncore XD3200 is around 10Mbps sitting close to the AP, and close to theoretical maximum with the patch applied. Signed-off-by: Clemens Hopfer <openwrt@wireloss.net> [edit commit message] Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ath79: add support for Yuncore XD3200Thibaut VARÈNE2022-04-156-2/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - QCA9563 (775MHz), 128MB RAM, 16MB SPI NOR - 2T2R 802.11b/g/n 2.4GHz - 2T2R 802.11n/ac 5GHz - 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port) LED for 5 GHz WLAN is currently not supported as it is connected directly to the QCA9882 radio chip. Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* build: target: improve UX of CONFIG_TARGET handlingPetr Štetiar2022-04-151-7/+15
| | | | | | | | | | | | | | | | | | | | Make it clear, that for `make kernel_{menu,old}config` it's possible to use only following values for CONFIG_TARGET variable: * env * target * subtarget * subtarget_target This should prevent misuse like `make kernel_menuconfig CONFIG_TARGET=bcm2710` etc. Keep support for obsolete `platform` and `subtarget_platform` targets with deprecation notice so this compat stuff could be removed in the future. Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: Piotr Dymacz <pepe2k@gmail.com>
* kernel: usb-net-asix: fix 5.15 dependencyPetr Štetiar2022-04-151-1/+1
| | | | | | | | | | | | Upstream in commit 34a1dee6bc44 ("net: usb: asix: ax88772: add generic selftest support") in version 5.14 added dependency on generic selftest functionality and armvirt/64 when compiled with ALL_KMODS=y reports following: Package kmod-usb-net-asix is missing dependencies for the following libraries: mdio_devres.ko selftests.ko Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: netdevices: add generic selftests modulePetr Štetiar2022-04-151-0/+16
| | | | | | | | | | Upstream in commit 3e1e58d64c3d ("net: add generic selftest support") in version 5.13 added generic selftests module and usb-net-asix already depends on it, in version 5.18 via commit 1710b52d7c13 ("net: usb: smsc95xx: add generic selftest support") it will be used by usb-net-smsc95xx as well. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: usb-net-smsc95xx: fix 5.15 dependencyPetr Štetiar2022-04-151-1/+1
| | | | | | | | | armvirt/64 when compiled with ALL_KMODS=y reports following: Package kmod-usb-net-smsc95xx is missing dependencies for the following libraries: libphy.ko Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: mdio-devres: fix of-mdio dependencyPetr Štetiar2022-04-151-1/+1
| | | | | | | | | armvirt/64 when compiled with ALL_KMODS=y reports following: Package kmod-mdio-devres is missing dependencies for the following libraries: of_mdio.ko Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: of-mdio: fix 5.15 fwnode_mdio dependencyPetr Štetiar2022-04-151-1/+2
| | | | | | | | | | | | Upstream in commit bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()") in version 5.14 introduced new dependency: Package kmod-of-mdio is missing dependencies for the following libraries: fwnode_mdio.ko Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mtools: update to version 4.0.39Daniel Golle2022-04-151-2/+2
| | | | | | | | | Improvements since the 4.0.38 release are: - Rename strtoi to strosi (string to signed int). The strtoi function on BSD does something else (returns an intmax, not an int) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts/gen_image_generic.sh: fix order of files in EFI bootfsDaniel Golle2022-04-151-2/+19
| | | | | | | | | | | | mtools recursive copy (mcopy -s ...) is using READDIR(3) to iterate over the directory entries, hence they end up in the FAT filesystem in traversal order which breaks reproducibility (rather than being added to the FAT filesystem in a reproducible order). Implement recursive copy in gen_image_generic.sh in Shell code instead, as in that way we can force files to be copied in reproducible order. Fixes: aece8f5ae8 ("scripts/gen_image_generic.sh: generate reproducible EFI filesystem") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* gemini: Bump kernel to v5.15Linus Walleij2022-04-141-1/+1
| | | | | | | It's working well on all tested targets, so let's move Gemini forward to v5.15. imx is already bumped so why not. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Create patches and config for kernel v5.15Linus Walleij2022-04-143-0/+588
| | | | | | | | | This creates a v5.15 baseline for the Gemini platform. The main new attraction is the new crypto driver from Corentin Labbe that we activate in the new config. Config was refreshed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* generic: backport 5.16 RTL8366RB improvementsLinus Walleij2022-04-148-0/+920
| | | | | | | The prerequisite DSA changes for the nice RTL8366RB improvements are already backported so bring back these changes as well. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* urandom-seed: go back to seeding with shell script temporarilyJason A. Donenfeld2022-04-145-442/+35
| | | | | | | | | | | | | | | | This reverts commit 2edc017a6e0cb92b72b768aaa46c6d336ad84eff. We shouldn't be using a shell script here, but the SeedRNG integration into OpenWRT requires a bit more thought. Etienne raised some important points immediately after this was merged and planned to send some follow up commits, but became busy with other things. The points he raised are important enough that we should actually back this out until it's ready to go, and then merge it as a cohesive unit. So let's revert this for now, and come back to it later on. Cc: Etienne Champetier <champetier.etienne@gmail.com> Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* mediatek: 5.15: re-enable arch timer on MT7623 as wellDaniel Golle2022-04-141-0/+1
| | | | | | Re-enable arch timer also on MT7623, yet another time. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: 5.15: enable arm arch timer for mt7629Chuanhong Guo2022-04-142-0/+12
| | | | | | otherwise the system delay is completely broken. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: 5.15: add support for ESMT F50x1G41LBChuanhong Guo2022-04-141-0/+143
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* netifd: relax check in dhcp proto handlerDaniel Golle2022-04-131-1/+1
| | | | | | | | | Checking whether /sbin/udhcpc is a symbolic link breaks using the DHCP proto handler inside procd-ujail where bind-mounts are used for the resolved link. Check whether /sbin/udhcpc is executable instead to allow using the proto handler for DHCP-provisioned containers. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2022-04-131-3/+3
| | | | | | | | 6343c3a procd: completely remove tmp-on-zram support 5c5e63f uxc: fix potential NULL-pointer dereference eb03f03 jail: include necessary files for per-netns netifd instance Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* malta: add config-5.15Daniel Golle2022-04-131-0/+263
| | | | | | | | Adding the kernel configuration has accidentally been omitted when enabling testing kernel 5.15. Add it now. Fixes: 09f6200198 ("malta: enable testing kernel 5.15") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: more robust sysupgrade on NANDDaniel Golle2022-04-131-4/+10
| | | | | | | | | Make sure sysupgrade on NAND also works in case of UBI volumes having index >9. While at it, also make sure UBI device is detected and abort in case it isn't. Use Shell built-in shorthand ':' instead of 'true'. Fixes #9708 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firewall3: bump to latest git HEADRui Salvaterra2022-04-131-3/+3
| | | | | | | 4cd7d4f Revert "firewall3: support table load on access on Linux 5.15+" 50979cc firewall3: remove unnecessary fw3_has_table Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ath79: nand: add 5.15 support for nand subtargetKoen Vandeputte2022-04-131-0/+2
| | | | | | Tested on GL.iNet E750 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: add missing symbols for 5.15Koen Vandeputte2022-04-131-0/+7
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* netfilter: move nf-log modules into separate packagesJo-Philipp Wich2022-04-122-7/+33
| | | | | | | | Both legacy iptables and nftables require nf-log modules for rule logging, so move them into a separate package both firewall implementations can depend on. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mac80211: backport minstrel_ht fix for legacy ratesFelix Fietkau2022-04-121-0/+61
| | | | | | Fixes OFDM rates on 5 GHz Signed-off-by: Felix Fietkau <nbd@nbd.name>
* toolchain: musl: Update to version 1.2.3Hauke Mehrtens2022-04-112-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: new features: - qsort_r function (POSIX-future) - pthread_getname_np extension function - hard float on SPE FPU for powerpc-sf - SEEK_DATA and SEEK_HOLE exposed in unistd.h (Linux extensions) compatibility: - free now preserves errno (POSIX-future requirement) - setjmp is declared explicitly with returns_twice for non-GCC compilers - macro version of isascii is no longer defined for C++ - dynamic linker now tolerates zero-length LOAD segments - epoll_[p]wait is now a cancellation point - pwd/grp functions no longer fail on systems without AF_UNIX support - POSIX TZ parsing is stricter to allow more names to fallback to files - NULL is now defined as nullptr when used in C++11 or later - gettext now accepts null pointer as argument bugs fixed: - old regression in wcwidth of Hangul combining (vowel/final) letters - duplocale used wrong malloc when malloc was replaced (1.2.2 regression) - fmaf rounded wrong on archs without FE_TOWARDZERO (all softfloat archs) - popen didn't honor requirement not to leak other popen pipe fds to child - aligned_alloc and variants crashed on allocation failure - dl_iterate_phdr reported incorrect module TLS pointers - mishandling of some inputs in acoshf and expm1f and functions using them - potentially wrong-sign zero in cproj functions at infinity - multiple bugs in legacy function cuserid - minor posix_spawn file actions API conformance issues - pthread_setname_np fd leak - out-of-bound read in zoneinfo handling with distant-past times - out-of-tree builds lacked generated debug cfi for x86 asm arch-specific bugs fixed: - powerpc (32-bit) struct shmid_ds layout was wrong for some fields - time64 struct layout was wrong in sound ioctl fallback (32-bit archs) In addition it contains the following improvements: * protect stack canary from leak via read-as-string by zeroing second byte * fix excessively slow TLS performance on some mips models Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* nftables: add CONFLICT between versionsEneas U de Queiroz2022-04-111-1/+2
| | | | | | Have nftables-json conflict with nftables-nojson. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* wolfssl: bump to 5.2.0Eneas U de Queiroz2022-04-114-9/+7
| | | | | | | | | | | | | | | | Fixes two high-severity vulnerabilities: - CVE-2022-25640: A TLS v1.3 server who requires mutual authentication can be bypassed. If a malicious client does not send the certificate_verify message a client can connect without presenting a certificate even if the server requires one. - CVE-2022-25638: A TLS v1.3 client attempting to authenticate a TLS v1.3 server can have its certificate heck bypassed. If the sig_algo in the certificate_verify message is different than the certificate message checking may be bypassed. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* mediatek/mt7622: enable accelerated crypto driversEneas U de Queiroz2022-04-112-0/+20
| | | | | | | | | Use ARMv8 Crypto Extensions for AES, ghash and sha256. This results in a 16 times speed gain in speed for aes-128-ctr, 17x in aes-128-gcm, and 9 times in sha256. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* scripts/gen_image_generic.sh: generate reproducible EFI filesystemDaniel Golle2022-04-111-2/+3
| | | | | | | | | Generate FAT filesystem for EFI boot in a reproducible way: * use '--invariant' option of mkfs.fat * set timestamps of all files to SOURCE_DATE_EPOCH * make sure files are ordered locale-independent Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: Update to version 5.15.33-1Hauke Mehrtens2022-04-1033-439/+85
| | | | | | | | | | | | | | This updates mac80211 to version 5.15.33-1 which is based on kernel 5.15.33. The removed patches were applied upstream. This new release contains many fixes which were merged into the upstream Linux kernel. This also contains the following new drivers which are needed for ath11k: * net/qrtr/ * drivers/bus/mhi/ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* imagebuilder: export SOURCE_DATE_EPOCH to environmentDaniel Golle2022-04-101-0/+1
| | | | | | | | Export SOURCE_DATE_EPOCH to environment so filesystem and image creation tools will make use of it. Fixes reproducibility of images generated with the ImageBuilder. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: remove no longer needed Configure stepDaniel Golle2022-04-091-4/+0
| | | | | | | | As anyway only the default is called now we can as well also just remove the override for Build/Configure. Fixes: e2cffbb805 ("arm-trusted-firmware-mediatek: update to 2021-03-10") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* trusted-firmware-a.mk: make sure include directory existsDaniel Golle2022-04-091-0/+3
| | | | | | | | | | | | ARM Trusted Firmware builds do not depend on any target libraries as they are bare-metal builds. However, the compiler aborts due to -Werror=missing-include-dirs if the include dir doesn't exists and this can happen when building with parallelisation as that makes it likely for arm-trusted-firmware-* to be build very early before any of the libraries which would implicitely create the directory. Fix this by making sure the include dir exists before building. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.110John Audia2022-04-0961-229/+111
| | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch generic/pending-5.10/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch ipq40xx/patches-5.10/105-ipq40xx-fix-sleep-clock.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Compile-/run-tested: ath79/generic (Archer C7 v2). Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.15 to 5.15.33Rui Salvaterra2022-04-0957-344/+124
| | | | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): generic/backport-5.15/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch [1] generic/backport-5.15/730-v5.16-hv-utils-add-PTP_1588_CLOCK-to-Kconfig-to-fix-build.patch [2] generic/pending-5.15/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch [3] generic/pending-5.15/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch [4] Manually rebased: generic/pending-5.15/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch ramips/patches-5.15/710-at803x.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.33&id=d29cda15cab086d82d692de016f7249545d4b6b4 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.33&id=d5aad7d63b1b5c1f3c4b69e12c05e7c7d196fae8 [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.33&id=ed750e22e44366e264bcdf7b1cf0713f08f7980a [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.33&id=0fe94b84c43cfea867e1721606185e8686d7d32f Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [Refresh patches again] [Remove generic/pending-5.15/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.15 to 5.15.32Rui Salvaterra2022-04-0924-97/+98
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: move some symbols to generic configAleksander Jan Bajkowski2022-04-0913-70/+29
| | | | | | | | | | | | | | | | | | | This commit add some enabled symbols to generic config. LTO is only supported by clang compiler and therefore should be disabled in the generic config instead of duplicating this symbol in each target. CONFIG_LTO_NONE do this job. The second group of symbols is enabled by the options available in the generic config and is therefore added here: * CONFIG_AF_UNIX_OOB is selected by CONFIG_NET && CONFIG_UNIX, * CONFIG_BINARY_PRINTF is selected by CONFIG_BPF_SYSCALL, * CONFIG_NET_SOCK_MSG is selected by CONFIG_BPF_SYSCALL && CONFIG_NET. The other symbols are disabled and should be in the generic config. This commit also removes these symbols from subtargets. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* generic: 5.15: fix aardvak pci pending patchAnsuel Smith2022-04-094-19/+14
| | | | | | | | Fix aardvak pci controller pending patch. Use generic_handle_domain_irq and fix rebase error. Fixes: 483503603cb2 ("generic: 5.15: rework pending patch") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* armvirt: add 5.15 as testing kernelAleksander Jan Bajkowski2022-04-091-0/+1
| | | | | | Add 5.15 as testing kernel. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* armvirt: move common symbols from subtarget to target configAleksander Jan Bajkowski2022-04-093-12/+6
| | | | | | | These new symbols are common for all subtargets and can be moved into target config. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* armvirt: refresh 5.15 configAleksander Jan Bajkowski2022-04-093-14/+22
| | | | | | | | This was done by executing these commands: $ make kernel_oldconfig CONFIG_TARGET=subtarget $ make kernel_oldconfig CONFIG_TARGET=subtarget_platform Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* armvirt: copy config files from 5.10Aleksander Jan Bajkowski2022-04-093-0/+379
| | | | | | Copy config files from 5.10. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* armvirt: refresh 5.10 configAleksander Jan Bajkowski2022-04-092-1/+2
| | | | | | | | This was done by executing these commands: $ make kernel_oldconfig CONFIG_TARGET=subtarget $ make kernel_oldconfig CONFIG_TARGET=subtarget_platform Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* ipq40xx: add RT-AC2200 alternative name to RT-AC42U/RT-ACRH17Ray Wang2022-04-091-0/+2
| | | | | | RT-AC2200 is the same device with a different name. The OEM firmwares have the same MD5. Signed-off-by: Ray Wang <raywang777@foxmail.com>
* ath79: Move TPLink WPA8630Pv2 to ath79-tiny targetJoe Mullally2022-04-099-42/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | These devices only have 6MiB available for firmware, which is not enough for recent release images, so move these to the tiny target. Note for users sysupgrading from the previous ath79-generic snapshot images: The tiny target kernel has a 4Kb flash erase block size instead of the generic target's 64kb. This means the JFFS2 overlay partition containing settings must be reformatted with the new block size or else there will be data corruption. To do this, backup your settings before upgrading, then during the sysupgrade, de-select "Keep Settings". On the CLI, use "sysupgrade -n". If you forget to do this and your system becomes unstable after upgrading, you can do this to format the partition and recover: * Reboot * Press RESET when Power LED blinks during boot to enter Failsafe mode * SSH to 192.168.1.1 * Run "firstboot" and reboot Signed-off-by: Joe Mullally <jwmullally@gmail.com> Tested-by: Robert Högberg <robert.hogberg@gmail.com>
* mwlwifi: fix 5.15 kernel supportRobert Marko2022-04-094-1/+103
| | | | | | | | Fix compilation and usage under kernel 5.15 for the mwlwifi driver. For detailed description of changes, check individual patches. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* dropbear: bump to 2022.82Konstantin Demin2022-04-099-66/+90
| | | | | | | | | | | | | | | | | | | | | | - update dropbear to latest stable 2022.82; for the changes see https://matt.ucc.asn.au/dropbear/CHANGES - use $(AUTORELEASE) in PKG_RELEASE - use https for all uris - refresh all patches - rewrite patches: - 100-pubkey_path.patch - 130-ssh_ignore_x_args.patch binary/pkg size changes: - ath79/generic, mips: - binary: 215112 -> 219228 (+4116) - pkg: 111914 -> 113404 (+1490) - ath79/tiny, mips: - binary: 172501 -> 172485 (-16) - pkg: 89871 -> 90904 (+1033) Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-20 01:13:08 +0000