aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* libtracefs: add Linux kernel trace file system libraryNick Hainke2022-08-061-0/+49
| | | | | | Needed by trace-cmd. Signed-off-by: Nick Hainke <vincent@systemli.org>
* libtraceevent: add Linux kernel trace event libraryNick Hainke2022-08-061-0/+74
| | | | | | Needed by trace-cmd. Signed-off-by: Nick Hainke <vincent@systemli.org>
* elfutils: update to 0.187Nick Hainke2022-08-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | Changes: debuginfod: Support -C option for connection thread pooling. debuginfod-client: Negative cache file are now zero sized instead of no-permission files. addr2line: The -A, --absolute option, which shows file names including the full compilation directory is now the default. To get the old behavior use the new option --relative. readelf, elflint: Recognize FDO Packaging Metadata ELF notes libdw, debuginfo-client: Load libcurl lazily only when files need to be fetched remotely. libcurl is now never loaded when DEBUGINFOD_URLS is unset. And when DEBUGINFOD_URLS is set, libcurl is only loaded when the debuginfod_begin function is called. Signed-off-by: Nick Hainke <vincent@systemli.org>
* base-files: LED/trigger/heartbeat: Add support for inversionOlliver Schinagl2022-08-061-0/+4
| | | | | | | | | The heartbeat trigger has the option to be inverted, however openwrt/uci/luci have no way to set this. This patch adds this support. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* base-files: LED/gpio: Ensure inverted is read as a booleanOlliver Schinagl2022-08-061-1/+1
| | | | | | | The sysfs interface for the GPIO takes a boolean value. Ensure we get one from uci. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* kernel: bump 5.10 to 5.10.135John Audia2022-08-063-7/+7
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.59John Audia2022-08-065-10/+10
| | | | | | | | | | Patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* zlib: backport fix for heap-based buffer over-read (CVE-2022-37434)Petr Štetiar2022-08-061-0/+32
| | | | | | | | | | | | zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader. Fixes: CVE-2022-37434 References: https://github.com/ivd38/zlib_overflow Signed-off-by: Petr Štetiar <ynezz@true.cz>
* generic: 5.15: disable CONFIG_DEBUG_INFO_REDUCED symbolPetr Štetiar2022-08-061-0/+1
| | | | | | | This came up during build testing of mvebu/cortexa9 target with 5.15 kernel. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* realtek: add support for Panasonic Switch-M48eG PN28480KINAGAKI Hiroshi2022-08-062-0/+391
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Panasonic Switch-M48eG PN28480K is a 48 + 4 port gigabit switch, based on RTL8393M. Specification: - SoC : Realtek RTL8393M - RAM : DDR3 128 MiB (Winbond W631GG8KB-15) - Flash : SPI-NOR 32 MiB (Macronix MX25L25635FMI-10G) - Ethernet : 10/100/1000 Mbps x48 + 2 - port 1-40 : TP, RTL8218B x5 - port 41-48 : RTL8218FB - port 41-44: TP - port 45-48: TP/SFP (Combo) - LEDs/Keys : 7x / 1x - UART : RS-232 port on the front panel (connector: RJ-45) - 3:TX, 4:GND, 5:GND, 6:RX (pin number: RJ-45) - 9600n8 - Power : 100-240 VAC, 50/60 Hz, 0.5 A - Plug : IEC 60320-C13 - Stock OS : VxWorks based Flash instruction using initramfs image: 1. Prepare the TFTP server with the IP address 192.168.1.111 2. Rename the OpenWrt initramfs image to "0101A8C0.img" and place it to the TFTP directory 3. Download the official upgrading firmware (ex: pn28480k_v30000.rom) and place it to the TFTP directory 4. Boot M48eG and interrupt the U-Boot with Ctrl + C keys 5. Execute the following commands and boot with the OpenWrt initramfs image rtk network on tftpboot 0x81000000 bootm 6. Backup mtdblock files to the computer by scp or anything and reboot 7. Interrupt the U-Boot and execute the following commands to re-create filesystem in the flash ffsmount c:/ ffsfmt c:/ this step takes a long time, about ~ 4 mins 8. Execute the following commands to put the official images to the filesystem updatert <official image> example: updatert pn28480k_v30000.rom this step takes about ~ 40 secs 9. Set the environment variables of the U-Boot by the following commands setenv loadaddr 0xb4e00000 setenv bootcmd 'sleep 10; bootm;' saveenv 'sleep 10;' is required as dummy to execute 'bootm' command correctly 10: Download the OpenWrt initramfs image and boot with it tftpboot 0x81000000 0101A8C0.img bootm 11: On the initramfs image, download the sysupgrade image and perform sysupgrade with it sysupgrade <imagename> 12: Wait ~ 120 seconds to complete flashing Known Issues: - 4x SFP ports are provided as combo ports by the RTL8218FB chip, but the phy driver has no support for it. Currently, only TP ports work by the RTL8218B support. Note: - "Switch-M48eG" is a model name, and "PN28480K" is a model number. Switch-M48eG has an another (old) model number ("PN28480"), it's not a Realtek based hardware. - Switch-M48eG has a "POWER" LED (Green), but it's not connected to any GPIO pin. - U-Boot checks the runtime images in the flash when booting and fails to execute "bootcmd" variable if the images are not existing. - A filesystem is formed in the flash (0x100000-0x1DFFFFF) on the stock firmware and it includes the stock images, configuration files and checksum files. It's unknown format, can't be managed on the OpenWrt. To get the enough space for OpenWrt, move the filesystem to the head of "fs_reserved" partition by execution of "ffsfmt" and "updatert". - A GPIO pin on PCA9539 is used for resetting external RTL8218B phys and RTL8218FB phy. This should be specified as "reset-gpios" property in MDIO node, but the current configuration of RTL8218B phy in the driver seems to be incomplete and RTL8218FB won't be configured on RTL8218D support. So, ethernet ports on these phys will be broken after hard-resetting. At the moment, configure this pin as gpio-hog to avoid breaking by resetting. - This model has 2x Microchip TCN75A thermal sensors. Linux Kernel supports TCN75 chip on lm75 driver, but no support for TCN75'A' variant. At the moment, use TCN75 support for the chips instead. Back to the stock firmware: 1. Delete "loadaddr" variable and set "bootcmd" to the original value on U-Boot: setenv loadaddr setenv bootcmd 'ffsrdm c:/runtime.had 0x81000000;alphadec c:/runtime.had 0x81000240 0x80010000;' on OpenWrt: fw_setenv loadaddr fw_setenv bootcmd 'ffsrdm c:/runtime.had 0x81000000;alphadec c:/runtime.had 0x81000240 0x80010000;' 2. Perform reset or reboot on U-Boot: reset on OpenWrt: reboot Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: enable pca953x GPIO driver for rtl839x subtargetINAGAKI Hiroshi2022-08-061-0/+3
| | | | | | | | | The system status LED on Panasonic Switch-M48eG PN28480K is connected to a PCA9539PW. To use the LED as a status LED of OpenWrt while booting, enable the pca953x driver and built-in to the kernel. Also enable CONFIG_GPIO_PCA953X_IRQ to use interrupt via RTL83xx GPIO. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: add support for Panasonic Switch-M24eG PN28240KINAGAKI Hiroshi2022-08-062-0/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Panasonic Switch-M24eG PN28240K is a 24 + 2 port gigabit switch, based on RTL8382M. Specification: - SoC : Realtek RTL8382M - RAM : DDR3 128 MiB (Winbond W631GG8KB-15) - Flash : SPI-NOR 32 MiB (Macronix MX25L25635FMI-10G) - Ethernet : 10/100/1000 Mbps x24 + 2 - port 1-8 : TP, RTL8218B - port 9-16 : TP, RTL8218B (SoC) - port 17-24 : RTL8218FB - port 17-22: TP - port 23-24: TP/SFP (Combo) - LEDs/Keys : 7x / 1x - UART : RS-232 port on the front panel (connector: RJ-45) - 3:TX, 4:GND, 5:GND, 6:RX (pin number: RJ-45) - 9600n8 - Power : 100-240 VAC, 50/60 Hz, 0.5 A - Plug : IEC 60320-C13 - Stock OS : VxWorks based Flash instruction using initramfs image: 1. Prepare the TFTP server with the IP address 192.168.1.111 2. Rename the OpenWrt initramfs image to "0101A8C0.img" and place it to the TFTP directory 3. Download the official upgrading firmware (ex: pn28240k_v30000.rom) and place it to the TFTP directory 4. Boot M24eG and interrupt the U-Boot with Ctrl + C keys 5. Execute the following commands and boot with the OpenWrt initramfs image rtk network on tftpboot 0x81000000 bootm 6. Backup mtdblock files to the computer by scp or anything and reboot 7. Interrupt the U-Boot and execute the following commands to re-create filesystem in the flash ffsmount c:/ ffsfmt c:/ this step takes a long time, about ~ 4 mins 8. Execute the following commands to put the official images to the filesystem updatert <official image> example: updatert pn28240k_v30000.rom this step takes about ~ 40 secs 9. Set the environment variables of the U-Boot by the following commands setenv loadaddr 0xb4e00000 setenv bootcmd bootm saveenv 10: Download the OpenWrt initramfs image and boot with it tftpboot 0x81000000 0101A8C0.img bootm 11: On the initramfs image, download the sysupgrade image and perform sysupgrade with it sysupgrade <imagename> 12: Wait ~ 120 seconds to complete flashing Known Issues: - 2x SFP ports are provided as combo ports by the RTL8218FB chip, but the phy driver has no support for it. Currently, only TP ports work by the RTL8218D support. Note: - "Switch-M24eG" is a model name, and "PN28240K" is a model number. Switch-M24eG has an another (old) model number ("PN28240"), it's not a Realtek based hardware. - Switch-M24eG has a "POWER" LED (Green), but it's not connected to any GPIO pin. - U-Boot checks the runtime images in the flash when booting and fails to execute "bootcmd" variable if the images are not existing. - A filesystem is formed in the flash (0x100000-0x1DFFFFF) on the stock firmware and it includes the stock images, configuration files and checksum files. It's unknown format, can't be managed on the OpenWrt. To get the enough space for OpenWrt, move the filesystem to the head of "fs_reserved" partition by execution of "ffsfmt" and "updatert". - A GPIO pin on PCA9539 is used for resetting external RTL8218B phy and RTL8218FB phy. This should be specified as "reset-gpios" property in MDIO node, but the current configuration of RTL8218B phy in the phy driver seems to be incomplete and RTL8218FB won't be configured on RTL8218D support. So, ethernet ports on these phys will be broken after hard-resetting. At the moment, configure this pin as gpio-hog to avoid breaking by resetting. Back to the stock firmware: 1. Delete "loadaddr" variable and set "bootcmd" to the original value on U-Boot: setenv loadaddr setenv bootcmd 'bootm 0x81000000' on OpenWrt: fw_setenv loadaddr fw_setenv bootcmd 'bootm 0x81000000' 2. Perform reset or reboot on U-Boot: reset on OpenWrt: reboot Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: add support for Panasonic Switch-M16eG PN28160KINAGAKI Hiroshi2022-08-063-0/+182
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Panasonic Switch-M16eG PN28160K is a 16 + 2 port gigabit switch, based on RTL8382M. Specification: - SoC : Realtek RTL8382M - RAM : DDR3 128 MiB (Winbond W631GG8KB-15) - Flash : SPI-NOR 32 MiB (Macronix MX25L25635FMI-10G) - Ethernet : 10/100/1000 Mbps x16 + 2 - port 1-8 : TP, RTL8218B (SoC) - port 9-16 : RTL8218FB - port 9-14: TP - port 15-16: TP/SFP (Combo) - LEDs/Keys : 7x / 1x - UART : RS-232 port on the front panel (connector: RJ-45) - 3:TX, 4:GND, 5:GND, 6:RX (pin number: RJ-45) - 9600n8 - Power : 100-240 VAC, 50/60 Hz, 0.5 A - Plug : IEC 60320-C13 - Stock OS : VxWorks based Flash instruction using initramfs image: 1. Prepare the TFTP server with the IP address 192.168.1.111 2. Rename the OpenWrt initramfs image to "0101A8C0.img" and place it to the TFTP directory 3. Download the official upgrading firmware (ex: pn28160k_v30003.rom) and place it to the TFTP directory 4. Boot M16eG and interrupt the U-Boot with Ctrl + C keys 5. Execute the following commands and boot with the OpenWrt initramfs image rtk network on tftpboot 0x81000000 bootm 6. Backup mtdblock files to the computer by scp or anything and reboot 7. Interrupt the U-Boot and execute the following commands to re-create filesystem in the flash ffsmount c:/ ffsfmt c:/ this step takes a long time, about ~ 4 mins 8. Execute the following commands to put the official images to the filesystem updatert <official image> example: updatert pn28160k_v30003.rom this step takes about ~ 40 secs 9. Set the environment variables of the U-Boot by the following commands setenv loadaddr 0xb4e00000 setenv bootcmd bootm saveenv 10: Download the OpenWrt initramfs image and boot with it tftpboot 0x81000000 0101A8C0.img bootm 11: On the initramfs image, download the sysupgrade image and perform sysupgrade with it sysupgrade <imagename> 12: Wait ~ 120 seconds to complete flashing Known Issues: - 2x SFP ports are provided as combo ports by the RTL8218FB chip, but the phy driver has no support for it. Currently, only TP ports work by the RTL8218D support. Note: - "Switch-M16eG" is a model name, and "PN28160K" is a model number. Switch-M16eG has an another (old) model number ("PN28160"), it's not a Realtek based hardware. - Switch-M16eG has a "POWER" LED (Green), but it's not connected to any GPIO pin. - U-Boot checks the runtime images in the flash when booting and fails to execute "bootcmd" variable if the images are not existing. - A filesystem is formed in the flash (0x100000-0x1DFFFFF) on the stock firmware and it includes the stock images, configuration files and checksum files. It's unknown format, can't be managed on the OpenWrt. To get the enough space for OpenWrt, move the filesystem to the head of "fs_reserved" partition by execution of "ffsfmt" and "updatert". - A GPIO pin on PCA9539 is used for resetting external RTL8218FB phy. This should be specified as "reset-gpios" property in MDIO node, but RTL8218FB won't be configured on RTL8218D support in the phy driver. So, ethernet ports on the phy will be broken after hard-resetting. At the moment, configure this pin as gpio-hog to avoid breaking by resetting. Back to the stock firmware: 1. Delete "loadaddr" variable and set "bootcmd" to the original value on U-Boot: setenv loadaddr setenv bootcmd 'bootm 0x81000000' on OpenWrt: fw_setenv loadaddr fw_setenv bootcmd 'bootm 0x81000000' 2. Perform reset or reboot on U-Boot: reset on OpenWrt: reboot Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* odhcp6c: update to git HEADHans Dedecker2022-08-051-3/+3
| | | | | | 7d21e8d dhcpv6: add option to ignore stateless advertise Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: silence refresh warningChristian Lamparter2022-08-052-2/+2
| | | | | | |Warning: trailing whitespace in line 66 of drivers/mtd/parsers/Kconfig Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* lantiq: fix lan port 3+4 phy-mode settings for Fritzbox 3390Daniel Kestrel2022-08-051-2/+2
| | | | | | | | There are forum reports that 2 LAN ports are still not working, the phy-mode settings are adjusted to fix the problem. Fixes: #10371 Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* realtek: Fix typo in Kconfig promptOlliver Schinagl2022-08-051-1/+1
| | | | | | | | | As the symbol RTL930x shows, the bool enables the RTL930x platform, not the RTL839x one. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> (slightly changed commit subject) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* umdns: add missing syscall to seccomp filterChen Minqiang2022-08-051-0/+4
| | | | | | | | | | | | | There is some syscall missing: 'getdents64' 'getrandom' 'statx' 'newfstatat' Found with: 'mkdir /etc/umdns; ln -s /tmp/1.json /etc/umdns/; utrace /usr/sbin/umdns' Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* ath79: add LTE led for GL.iNet GL-XE300Leo Soares2022-08-051-0/+1
| | | | | | | This commit adds the LTE led for GL.iNet GL-XE300 to the default leds config. Signed-off-by: Leo Soares <leo@hyper.ag>
* ramips: fix fw_setsysWenli Looi2022-08-051-1/+1
| | | | | | | | | This change was included in the original pull request but later omitted for some reason: https://github.com/openwrt/openwrt/pull/4936 Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
* ramips: support fw_printenv for Netgear WAX202Wenli Looi2022-08-051-1/+2
| | | | | | | | Config partition contains uboot env for the first 0x20000 bytes. The rest of the partition contains other data including the device MAC address and the password printed on the label. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
* kernel: add kmod-usb-hid-mcp2221Leo Soares2022-08-051-0/+17
| | | | | | | | | | "The MCP2221 is a USB-to-UART/I2C serial converter which enables USB connectivity in applications that have a UART and I2C interfaces." <https://www.microchip.com/en-us/product/MCP2221> Signed-off-by: Leo Soares <leo@hyper.ag> (replaced GPIOLIB KConfig with @GPIO_SUPPORT) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: usb-serial-cp210x: @GPIO_SUPPORTChristian Lamparter2022-08-051-2/+2
| | | | | | | | | | all other drivers depend on @GPIO_SUPPORT rather than forcing CONFIG_GPIOLIB=y. (I wonder what would happen if someone decides to try UML with USBIP?) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: add missing Lex 3I380NX network detectionPaul Spooren2022-08-052-0/+104
| | | | | | | | | | | | | | | | | | | The Lex 3I380NX industrial PC has 4 ethernet controllers on board which need pmc_plt_clk0 - 3 to function, add it to the critclk_systems DMI table, so that drivers/clk/x86/clk-pmc-atom.c will mark the clocks as CLK_CRITICAL and they will not get turned off. This commit is nearly redundant to 3d0818f5eba8 ("platform/x86: pmc_atom: Add Lex 3I380D industrial PC to critclk_systems DMI table") but for all Lex Baytrail devices. The original vendor firmware is only available using the WaybackMachine: http://www.lex.com.tw/products/3I380NX.html Signed-off-by: Michael Schöne <michael.schoene@rhebo.com> Signed-off-by: Paul Spooren <paul.spooren@rhebo.com> (Hans broader version for more Lex Baytrail systems, v5.15) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ltq-vdsl-app: Fix counter overflow resulting in negative valuesRoland Barenbrug2022-08-051-1/+1
| | | | | | | | | | | | The re-transmit counters can overflow the 32 bit representation resulting in negative values being displayed. Background being that the numbers are treated at some point as signed INT rather than unsigned INT. Change the counters from 32 bit to 64 bit, should provide sufficient room to avoid any overflow. Not the nicest solution but it works Fixes: #10077 Signed-off-by: Roland Barenbrug <roland@treslong.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* libmnl: fix build when bash is not located at /bin/bashMark Mentovai2022-07-311-0/+11
| | | | | | | | | | | | This fixes the libmnl build on macOS, which ships with an outdated bash at /bin/bash. During the OpenWrt build, a modern host bash is built and made available at staging_dir/host/bin/bash, which is present before /bin/bash in the build's PATH. This is similar to 8f7ce3aa6dda, presently appearing at package/kernel/mac80211/patches/build/001-fix_build.patch. Signed-off-by: Mark Mentovai <mark@mentovai.com>
* ramips: add support for H3C TX1800 Plus / TX1801 Plus / TX1806Shiji Yang2022-07-319-3/+255
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | H3C TX180x series WiFi6 routers are customized by different carrier. While these three devices look different, they use the same motherboard inside. Another minor difference comes from the model name definition in the u-boot environment variable. Specifications: SOC: MT7621 + MT7915 ROM: 128 MiB RAM: 256 MiB LED: status *2 Button: reset *1 + wps/mesh *1 Ethernet: lan *3 + wan *1 (10/100/1000Mbps) TTL Baudrate: 115200 TFTP server IP: 192.168.124.99 MAC Address: use address(sample 1) address(sample 2) source label 88:xx:xx:98:xx:12 88:xx:xx:a2:xx:a5 u-boot-env@ethaddr lan 88:xx:xx:98:xx:13 88:xx:xx:a2:xx:a6 $label +1 wan 88:xx:xx:98:xx:12 88:xx:xx:a2:xx:a5 $label WiFi4_2G 8a:xx:xx:58:xx:14 8a:xx:xx:52:xx:a7 (Compatibility mode) WiFi5_5G 8a:xx:xx:b8:xx:14 8a:xx:xx:b2:xx:a7 (Compatibility mode) WiFi6_2G 8a:xx:xx:18:xx:14 8a:xx:xx:12:xx:a7 WiFi6_5G 8a:xx:xx:78:xx:14 8a:xx:xx:72:xx:a7 Compatibility mode is used to guarantee the connection of old devices that only support WiFi4 or WiFi5. TFTP + TTL Installation: Although a TTL connection is required for installation, we do not need to tear down it. We can find the TTL port from the cooling hole at the bottom. It is located below LAN3 and the pins are defined as follows: |LAN1|LAN2|LAN3|----|WAN| -------------------- |GND|TX|RX|VCC| 1. Set tftp server IP to 192.168.124.99 and put initramfs firmware in server's root directory, rename it to a simple name "initramfs.bin". 2. Plug in the power supply and wait for power on, connect the TTL cable and open a TTL session, enter "reboot", then enter "Y" to confirm. Finally push "0" to interruput boot while booting. 3. Execute command to install a initramfs system: # tftp 0x80010000 192.168.124.99:initramfs.bin # bootm 0x80010000 4. Backup nand flash by OpenWrt LuCI or dd instruction. We need those partitions if we want to back to stock firmwre due to official website does not provide download link. # dd if=/dev/mtd1 of=/tmp/u-boot-env.bin # dd if=/dev/mtd4 of=/tmp/firmware.bin 5. Edit u-boot env to ensure use default bootargs and first image slot: # fw_setenv bootargs # fw_setenv bootflag 0 6. Upgrade sysupgrade firmware. 7. About restore stock firmware: flash the "firmware" and "u-boot-env" partitions that we backed up in step 4. # mtd write /tmp/u-boot-env.bin u-boot-env # mtd write /tmp/firmware.bin firmware Additional Info: The H3C stock firmware has a 160-byte firmware header that appears to use a non-standard CRC32 verification algorithm. For this part of the data, the u-boot does not check it so we can just directly replace it with a placeholder. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* kernel: bump 5.15 to 5.15.58John Audia2022-07-319-21/+21
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* x86: update defconfig for 5.15.57John Audia2022-07-311-0/+7
| | | | | | | | Add some new/missing symbols relating to speculative execution mitigations[1]. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v5.15.57&id2=v5.15.56 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.57John Audia2022-07-313-4/+4
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.56John Audia2022-07-3114-90/+29
| | | | | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.15/950-0470-sound-usb-add-device-quirks-for-A4Tech-FHD-1080p-web.patch Remove upstreamed: bcm27xx/patches-5.15/950-0060-tty-amba-pl011-Add-un-throttle-support.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.56&id=2db3b95166f72e6481a79b82b1d6f94f4b18fcc1 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.55John Audia2022-07-3119-185/+47
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.54John Audia2022-07-3126-45/+45
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* arm-trusted-firmware-mvebu: update cm3 gcc to 11.2Andre Heider2022-07-311-4/+4
| | | | | | https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update to v2.7Andre Heider2022-07-317-436/+23
| | | | | | | Remove the backported patches and add another to allow building with the OpenWrt build system. Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: bump mox-boot-builder to v2022.06.11Andre Heider2022-07-312-15/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the gold patch, since upstream doesn't hardcode it anymore. 406454d wtmi: Don't print another newline on standalone build ec97868 Bump mox-imager commit e4c4b9d wtmi: Call main from C code in startup 4c1d3ff wtmi: Move startup assmebly to C file as inline assmebly ee570ea wtmi: Indent Makefiles 18a7c0b wtmi: Use -f{function,data}-sections and --gc-sections 47ad100 wtmi: Use bfd linker instead of gold 5e34aa1 wtmi: Keep .data* and .bss* sections in linker scripts 7a4e3d2 wtmi: compressed, reload_helper: Discard .ARM* section d943726 wtmi: compressed: Keep main function in linker script d4f0fc6 wtmi: Keep main function in linker script 092148c wtmi: Fix -Warray-bounds warning 469e1b6 wtmi: Add do_div() implementation from Linux 90f46a0 Bump mox-imager commit 8bc6254 wtmi: Always use gold and link with --rosegment and --gc-sections flags 0b68a33 wtmi: Implement Marvell's OTP write commands 53d2a1c Bump mox-imager commit b4c34b4 Rename arm-trusted-firmware to trusted-firmware-a 5f79ace Sync mox-imager submodule URL a1cdd32 Sync TF-A submodule URL 58ef1af Sync u-boot submodule URL 90d28e1 wtmi: Check argument validity in Marvell's CMD_OTP_READ_1B command more 3a48cf1 Bump mox-imager commit 807a3e1 wtmi: Implement Marvell's OTP read commands 77b1232 wtmi: Enable OTP read/write mailbox commands 9724d41 wtmi: Add is_secure_boot() 03de0c1 Bump mox-imager commit 2133601 wtmi: Fix efuse_write_row_with_ecc_lock() for masked ECC rows 545a89f wtmi: Don't allow masked rows in efuse_write_row_with_ecc_lock() 94ebc98 wtmi: Don't program already programmed bits in efuse_raw_write() 2369750 wtmi: Remove inline specifier from is_row_masked() 53e2636 wtmi: Use ARRAY_SIZE() cc3e23b wtmi: Remove duplicate checks 89d24be Makefile: ignore clean target errors 9ee8b8d Bump mox-imager commit 489262b Bump mox-imager commit 79d2f32 deploy: Print board type in deploy output 78f15b0 deploy: Print board version without board type bits in deploy output e69fdfa deploy: Always determine 512 MiB RAM when deploying RIPE Atlas Probe d1f7d07 deploy: Write eMMC Boot Mode into OTP when deploying RIPE Atlas Probe d43a089 Bump mox-imager commit 49ac21d deploy: Use get_ram_size() from ddr.c 1e7705d Print DDR type and size when initializing 6f85e72 Move get_ram_size() to ddr.c edb1079 wtmi: Rename Atlas_RIPE to RIPE_Atlas e6a3aee wtmi: Inform about board type in CMD_BOARD_INFO 50aeae5 wtmi: Read only bits 53:48 of row eFuse 42 as board version b882398 wtmi: Add README.md (document OTP content) c068431 wtmi: Add ARRAY_SIZE() macro 4af2317 wtmi: Use 50 MHz as SPI clock rate 226fc5c wtmi: Add fast spi_write() function 518c914 wtmi: clock: Check for zero loops, not argument, in ndelay() / udelay() 89a21c5 wtmi: Fix comment 7b3e11a wtmi: Add clk command to print xtal and TBG clock rates 5127638 wtmi: Use the signed keyword when defining signed types fb31ed2 wtmi: Fix DDR training failure check 1b1b938 wtmi: clock: Check for zero in ndelay() / udelay() c0ee09a wtmi: Print correct DDR version in debug message edfb875 Bump mox-imager commit 85cb5e3 Bump mox-imager commit c4e9334 wtmi: debug: interpret char 127 as backspace a778fd9 Bump mox-imager commit Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: bump mv-ddr-marvell to current versionAndre Heider2022-07-311-3/+3
| | | | | | | | | | 6ff988f mv_ddr: a3700: Use the right size for memset to not overflow 0f3e893 mv_ddr: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision 4bae770 mv_ddr: a38x: fix SPLIT_OUT_MIX state decision cdefd8b mv_ddr: a38x: Fix Synchronous vs Asynchronous mode determination 8c42ad9 mv_ddr_4_training: cast uint64_t to unsigned long long Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: bump a3700-utils to current versionAndre Heider2022-07-311-3/+3
| | | | | | | | | | | | | | | | | 1d97715 wtmi: Discard ELF symbols from firmware binary 2d2a21c wtmi: Allow access to the 43th OTP row e733e9f Fix boot from SATA build 4392eaf wtmi: Fix sending status code of cmd execution 14b3c61 Wtpdownloader: Remove out-of-dated x86-64 ELF binary WtpDownload_linux e345b95 Wtpdownloader: Fix setting tty c_cflag options 0c502d5 Wtpdownloader: Call HandlePendingMessages() after Port->WtpCmd is freed d91761a Wtpdownloader: Fix memory leaks bc11d18 Wtpdownloader: Check for number of read bytes prior touching read buffer 58db335 Wtpdownloader: Add missing check in SendContinuousForceConsoleMode() if byte was really read a4029c0 Wtpdownloader: Fix 32/64-bit host detection 3679034 Wtpdownloader: Print missing newline at the end of output Signed-off-by: Andre Heider <a.heider@gmail.com>
* uboot-mvebu: update to v2022.07Andre Heider2022-07-312-33/+2
| | | | | | | Remove one merged patch. Signed-off-by: Andre Heider <a.heider@gmail.com> Tested-by: Josef Schlehofer <pepe.schlehofer@gmail.com> [Turris Omnia]
* tools/libressl: disable assembly code for all hostsMichael Pratt2022-07-311-4/+1
| | | | | | | | | | | | | | | | | | | This SSL library is for hosts only and not shipped as a build product, therefore its performance quality (speed) is not critical. Assembly code is broken in LibreSSL for some x86_64 hosts (part of git history) and for some RISC host archs like armv7l, aarch64, powerpc, ppc64, etc... so let's just disable it for all hosts. For example, this fixes an instance on ARM hosts where the host Python 3 builds broken modules which link to LibreSSL, even with patches that enable LibreSSL support with the import error "unexpected reloc type 3". Ref: a395563f6 ("build: fix libressl build on x32 (amd64ilp32) host ") Suggested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Michael Pratt <mcpratt@pm.me>
* tools/libressl: ensure PIC-only object compilationMichael Pratt2022-07-311-1/+7
| | | | | | | | | | | | Line up configure arguments for cleaner git diff and editing and grepping. LibreSSL must be built with PIC, and has the flags for it already in CFLAGS. Add the configure option native to LibreSSL to use only PIC in objects, which further enforces that each object in the library has the PIC flag to prevent a mixture of PIC / non-PIC objects within it. Ref: 96a940308 ("tools: libressl: always build as PIC") Signed-off-by: Michael Pratt <mcpratt@pm.me>
* mac80211: Update to version 5.15.58-1Hauke Mehrtens2022-07-3130-247/+91
| | | | | | | | This updates mac80211 to version 5.15.58-1 which is based on kernel 5.15.58. The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools: bump 7z package to 22.01Sander Vanheule2022-07-311-3/+3
| | | | | | | | | | | | | | | | | | | | | Version 22.00 of 7z causes build failures on systems using GCC 12 with the following error: ../../../../C/LzmaEnc.c: In function 'LzmaEnc_CodeOneMemBlock': ../../../../C/LzmaEnc.c:2996:19: error: storing the address of local variable 'outStream' in '*p.rc.outStream' [-Werror=dangling-pointer=] 2996 | p->rc.outStream = &outStream.vt; | ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~ ../../../../C/LzmaEnc.c:2979:28: note: 'outStream' declared here 2979 | CLzmaEnc_SeqOutStreamBuf outStream; | ^~~~~~~~~ ../../../../C/LzmaEnc.c:2979:28: note: 'pp' declared here Upgrade to version 22.01 which contains the required fix. Fixes: 5fcc6f0f1942 ("tools: add 7z host package") Suggested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ustream-ssl: prevent unused crypto lib dependencies from being compiledBoris Krasnovskiy2022-07-311-1/+1
| | | | | | Prevented unused crypto lib dependencies from being compiled Signed-off-by: Boris Krasnovskiy <borkra@gmail.com>
* hostapd: prevent unused crypto lib dependencies from being compiledBoris Krasnovskiy2022-07-311-16/+16
| | | | | | Prevented unused crypto lib dependencies from being compiled Signed-off-by: Boris Krasnovskiy <borkra@gmail.com>
* wolfssl: fix math library buildJohn Audia2022-07-311-0/+23
| | | | | | | | | | | | | Apply upstream patch[1] to fix breakage around math libraries. This can likely be removed when 5.5.0-stable is tagged and released. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B 1. https://github.com/wolfSSL/wolfssl/pull/5390 Signed-off-by: John Audia <therealgraysky@proton.me>
* libcap: update to 2.65Nick Hainke2022-07-301-2/+2
| | | | | | | | | | | | | Changes: a47d86d Up the release version to 2.65 fc99e56 Include more signatures in pgp.keys.asc. 52288cc Close out this comment in the go/Makefile eb0f1df Prevent 'capsh --user=xxx --' from generating a bash error. 9a95791 Improve documentation for cap_get_pid and cap_reset_ambient. 21d08b0 Fix syntax error in DEBUG protected setcap.c code. 9425048 More useful captree usage string and man page. Signed-off-by: Nick Hainke <vincent@systemli.org>
* libcap: update to 2.64Nick Hainke2022-07-301-2/+2
| | | | | | | | | | | | | Changes: 38cfa2e Up the release version to 2.64 7617af6 Avoid a deadlock in forked psx thread exit. fc029cb Include LIBCAP_{MAJOR,MINOR} #define's in sys/capability.h ceaa591 Clarify how the cap_get_pid() argument is interpreted. 15cacf2 Fix prctl return code/errno handling in libcap. aae9374 Be explicit about CGO_ENABLED=1 for compare-cap build. 66a8a14 psx: free allocated memory at exit. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mtools: update to 4.0.40Nick Hainke2022-07-301-2/+2
| | | | | | | | | Changes: - Remove libbsd dependency - Better compatibility with legacy platforms such as AT&T UnixPC - Upgraded to autoconf 2.71 Signed-off-by: Nick Hainke <vincent@systemli.org>
* odhcp6c: update to latest git HEADDávid Benko2022-07-301-3/+3
| | | | | | 9212bfc odhcp6c: fix IA discard when T1 > 0 and T2 = 0 Signed-off-by: Dávid Benko <davidbenko@davidbenko.dev>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-15 22:47:54 +0000