aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* build: images: squashfs: add help, fix descriptionTony Butler2022-12-061-1/+4
| | | | | | | | | | | | | | | add help text for `TARGET_SQUASHFS_BLOCK_SIZE` to match the only valid settings accepted by `mksquashfs4` ("block size not power of two or not between 4096 and 1Mbyte") thus for this setting in "KB", the set: `4, 8, 16, 32, 64, 128, 256, 512, 1024` replace `squashfs-lzma` with `squashfs` in the description for `TARGET_ROOTFS_SQUASHFS` because it has various compressions, and not just lzma as it did in the past cosmetic change with no functional effect Signed-off-by: Tony Butler <spudz76@gmail.com>
* ath79: optimize the firmware recipe for Netgear NAND devicesShiji Yang2022-12-061-11/+7
| | | | | | | | | | | | | | 1. Drop useless character '0xff' before fake filesystem header. 2. Reduce useless padding to shrink the size of the sysupgrade image. 3. Do not check the size of sysupgrade image. It does not make sense to check the size of a compressed package. 4. Do not take the size of netgear header into account because it will not be written to Flash. 5. Use the default lzma compression dictionary parameter '-d24' to get better performance. Tested on Netgear R6100 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ath79: convert Netgear R6100 radio calibration to nvmem-cellsShiji Yang2022-12-062-6/+12
| | | | | | | | use nvmem-cells implementation to avoid copying art calibration data to rootfs. Tested on Netgear R6100 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* tools/cmake: update to 3.25.1Hannu Nyman2022-12-064-5/+5
| | | | | | | | Update cmake to version 3.25.1 * refresh patches Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* kernel: ca8210: Fix crash by zero initializing dataHauke Mehrtens2022-12-062-0/+60
| | | | | | This fixes crashes at bootup on pistachio. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* e2fsprogs: Fix CVE-2022-1304Hauke Mehrtens2022-12-064-2/+102
| | | | | | | | | This fixes CVE-2022-1304: An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: add support for reyee AX3200-E5Alex Hansen2022-12-066-255/+416
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is yet another model of the Ruijie RG-EW3200GX PRO with a slightly different flash layout, install process is the same. Specifications: SoC: MT7622B RAM: 256MB Flash: XMC XM25QH128C or Winbond WQ25Q128JVSQ 16MB SPI NOR Ethernet: 5x1GbE Switch: MT7531BE WiFi: 2.4G: MT7622 5G: MT7915AN+MT7975AN 3LEDs: System LED(blue) + Mesh LED(green) + Mesh LED(red) 2Keys: Mesh button + Reset button UART: Marked J19 on board. 3.3v, 115200n1 Power: 12V 2.5A Flash instruction: 1. Serve the initramfs.img using a TFTP server with address 10.10.10.3. 2. Interrupt the uboot startup process via UART. 3. Select "System Load Linux to SDRAM via TFTP" item. 4. (important) Back up firmware(mtd7) partitions with: dd if=/dev/mtd7 of=/tmp/firmware.bin and then download the firmware.bin image via SCP. 5. Flash the OpenWrt sysupgrade firmware. Recovery stock firmware: 1. Transfer the firmware.bin image to the device. 2. Flash the image with: mtd write firmware.bin firmware Signed-off-by: Alex Hansen <mralexh123@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firewall4: update to latest Git HEADJo-Philipp Wich2022-12-061-3/+3
| | | | | | | | 700a925 fw4: prevent null access when no ipsets are defined 6443ec7 config: drop input traffic by default 119ee1a ruleset: drop ctstate invalid traffic for masq-enabled zones Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ucode: update to latest Git HEADJo-Philipp Wich2022-12-061-3/+3
| | | | | | | | | | | | | | | | | 46d93c9 tests: fixup testcases 4c654df types: adjust double printing format eac2add compiler: fix bytecode for logical assignments of properties 3903b18 fs: add `realpath()` function 8366102 math: add isnan() function eef83d3 tests: relax sleep() test 394e901 lib: uc_json(): accept trailing whitespace when parsing strings 1867c8b uloop: terminate parent uloop in task child processes d2cc003 uci: auto-load package in `ctx.foreach()` and `ctx.get_first()` 6c5ee53 compiler: ensure that arrow functions with block bodies return no value fdc9b6a compiler: fix `??=`, `||=` and `&&=` logical assignment semantics 88dcca7 add cmake to install requires for debian Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: mt7621: enable lzma-loader for netis WF2881Joonhyuk Song2022-12-061-1/+2
| | | | | | Fixes boot loader LZMA decompression issues (LZMA ERROR 1) Signed-off-by: Joonhyuk Song <thenoface303@gmail.com>
* ramips: mt7621: mikrotik 760igs (hEX S) fix SFPJohn Thomson2022-12-061-0/+1
| | | | | | | | | | | | | This device uses an AR8031/AR8033 chip to convert SoC gmac1 RGMII to 1000base-x or sgmii for the SFP fibre cage. The SFP cage requires phy-mode rgmii-rxid, and without it will not recieve any packets: ethtool -S sfp rx_fcs_errors will increase when packets should be being received, but no other _rx counters will change. Fixes: c77858aa792 ("ramips: mt7621-dts: change phy-mode of gmac1 to rgmii") Reviewed-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* mediatek: mt7623: build mt6577_auxadc driver into kernelDaniel Golle2022-12-052-1/+3
| | | | | | | | | Set CONFIG_MT6577_AUXADC=y as otherwise reading temperature of the thermal-zone doesn't work on MT7623 (it does work fine without this driver on MT7622 and MT7986). Fixes: f2ae4e2f8c ("mediatek: clean up platform kernel modules") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* trusted-firmware-a.mk: fix build with binutils 2.39Daniel Golle2022-12-051-0/+1
| | | | | | | | | Starting from version 2.39 binutils now warns about sections with rwx permissions. While this is generally desirable it breaks building ARM TrustedFirmware-A bl2 which treats warnings as errors. Disable the warning/error for now to fix build. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: use ARTIFACTS for initramfs-factory of I-O DATA WN-AX1167GRINAGAKI Hiroshi2022-12-051-19/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use ARTIFACTS to generate initramfs-based factory image of I-O DATA WN-AX1167GR instead of redundant recipe which generate on KERNEL_INITRAMFS. Note: WN-AX1167GR has 2x OS images on stock firmware. stock log: flash manufacture id: c2, device id 20 18 MX25L12805D(c2 2018c220) (16384 Kbytes) mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 Creating 10 MTD partitions on "raspi": 0x000000000000-0x000001000000 : "ALL" 0x000000000000-0x000000030000 : "Bootloader" 0x000000030000-0x000000040000 : "Config " 0x000000040000-0x000000050000 : "Factory" 0x000000050000-0x000000060000 : "iNIC_rf" 0x000000060000-0x0000007e0000 : "Kernel" 0x000000800000-0x000000f80000 : "app" 0x000000f90000-0x000000fa0000 : "Key" 0x000000fa0000-0x000000fb0000 : "backup" 0x000000fb0000-0x000001000000 : "storage" 1st image is "Kernel" and 2nd is "app" when booted from 1st image. In OpenWrt, those 2x partitions are combined to "firmware" with undefined (empty) areas (0x7e0000-0x7fffff, 0xf80000-0xf8ffff). The size of an OS image partition is 0x780000 (7680 KiB = 7.5 MiB), so check-size for initramfs-factory image needs to be called with the size. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* build: make sure that $(STAGING_DIR_IMAGE) existsDaniel Golle2022-12-051-0/+1
| | | | | | | Call 'mkdir -p $(STAGING_DIR_IMAGE)' before trying to store files in this potentially non-existing folder. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* CI: trigger check also on build and check-kernel-patches workflow changeChristian Marangi2022-12-042-0/+6
| | | | | | | | | Since kernel and packages workflow now use a shared build workflow, they also need to react on changes on these shared workflow. Fix this and add these shared workflow to the event paths to check. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: build: fix matching for openwrt release branch for toolchain parsingChristian Marangi2022-12-041-6/+8
| | | | | | | | | | | | | The current match logic doesn't handle test for push events related to stable release (example openwrt-22.03) but only fork with the related prefix (example openwrt-22.03-fixup) Fix wrong matching and while at it also add extra checks to other matching (check if the branch name actually start with the requested prefix) Fixes: e24a1e6f6d7f ("CI: build: add support for external toolchains from stable branch") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: fix matching for openwrt release branch for container selectionChristian Marangi2022-12-042-8/+12
| | | | | | | | | | | | | The current match logic doesn't handle test for push events related to stable release (example openwrt-22.03) but only fork with the related prefix (example openwrt-22.03-fixup) Fix wrong matching and while at it also add extra checks to other matching (check if the branch name actually start with the requested prefix) Fixes: abe8a4824210 ("CI: build: add support for per branch tools container") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: build: add support to fallback to sdk for external toolchainChristian Marangi2022-12-041-8/+33
| | | | | | | Add support to use sdk as external toolchain if the packaged external toolchain tar is not found on openwrt servers for build shared workflow. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: build: add support for external toolchains from stable branchChristian Marangi2022-12-041-2/+27
| | | | | | | | | | | | | Add support to use external toolchains from stable branch if we are testing commit targeting stable openwrt branch in kernel and packages workflow. With pr the target branch is parsed and the right toolchain is used. To use the stable toolchain for local testing the branch needs to have the prefix openwrt-[0-9][0-9].[0-9][0-9]- (example openwrt-21.02-fixup) Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: build: add support for per branch tools containerChristian Marangi2022-12-042-2/+56
| | | | | | | | | | | Add support in build shared workflow for per branch tools container. With pr the target branch is parsed and the right container is used. To use the stable container for local testing the branch needs to have the prefix openwrt-[0-9][0-9].[0-9][0-9]- (example openwrt-21.02-fixup) Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: tools: support per branch tools containerChristian Marangi2022-12-041-1/+26
| | | | | | | | | | | | | | | | | | | Add support to push per branch container tools. For anything not official stick to latest tag that correspond to test run from master. If we are testing something for one of the openwrt stable branch, parse the branch name or the tag and push dedicated tools containers. To use the stable container for local testing the branch needs to have the prefix openwrt-[0-9][0-9].[0-9][0-9] (example openwrt-21.02-fixup) Any branch that will match this pattern openwrt-[0-9][0-9].[0-9][0-9] will refresh the tools container with the matching tag. (example branch openwrt-22.03 -> tools:openwrt-22.03) (example branch openwrt-22.03-test -> tools:openwrt-22.03) Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* iucode-tool: fix compile error with musl libc and USE_CPUID_DEVICEChristian Marangi2022-12-041-0/+29
| | | | | | | | | | | Add patch to fix compilation error with USE_CPUID_DEVICE enabled and musl used as libc. Musl doesn't add limits.h header by default and this is required if USE_CPUID_DEVICE is used. The package currently compile because fortify headers include limits.h by default. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ramips: add support for HiWiFi HC5611Senis John2022-12-045-0/+44
| | | | | | | | | | | | | | | | | | | | | | | CPU: MediaTek MT7628AN @ 575 MHz Flash: 16 MB RAM: 128 MB Ethernet: 10/100Mbps x 1 Wlan: 300 Mbps USB: USB 2.0 x 1 LED: red/green x 1 Button: reset x 1 1. Open https://www.hiwifi.wtf/, Get Cloud token and unlock ssh 2. Upload the openwrt firmware to the router via SCP 3. Login the router via SSH 4. Run `mtd -r write path_to_firmware.bin firmware` I have tested on my device. - The LED will display RED on power-on, After system start completed, trun GREEN - Reset button working now. Long press after 5s will reset factory. Short press less 1s will reboot the device - USB can working under official u-boot Signed-off-by: Senis John <thank243@gmail.com>
* rockchip: enable watchdog driverKien Truong2022-12-041-1/+2
| | | | | | | | Enable Synopsys DesignWare watchdog driver for rockchip device Tested on NanoPi R2S Signed-off-by: Kien Truong <duckientruong@gmail.com>
* Revert "mvebu: switch default kernel to 5.15"Petr Štetiar2022-12-041-1/+2
| | | | | | | | | | | | | | This reverts commit 5429411f732ba76eced30b5b596ec9c0374d0965 as upstream in commit e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") has changed `PTP_1588_CLOCK` dependency handling in 5.15 kernel. That currently leads to `CONFIG_NET_DSA_MV88E6XXX=m` in images produced by buildbots due to `CONFIG_ALL_KMODS=y` config option being used in those builds, which leads to a broken LAN bridge network on several devices. References: https://lists.infradead.org/pipermail/openwrt-devel/2022-December/039950.html Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: mt7621: enable lzma-loader for ZyXEL WAP6805Bjørn Mork2022-12-031-1/+2
| | | | | | | Fixing "Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover". Signed-off-by: Bjørn Mork <bjorn@mork.no>
* build: config: cleanup impossible dependency logicTony Butler2022-12-032-2/+1
| | | | | | | | | some config `depends on` lines contained outdated kernel version checks that can no longer happen and had become non-operational; clean them up cosmetic change with no functional effect Signed-off-by: Tony Butler <spudz76@gmail.com>
* tools/xz: update to 5.2.9Nick Hainke2022-12-031-2/+2
| | | | | | Update to latest release. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: Update to version 5.15.81Hauke Mehrtens2022-12-0328-359/+56
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* CI: Build all boards and testing kernelHauke Mehrtens2022-12-032-0/+29
| | | | | | | | This adds options to build all boards of a selected target and an additional option to build the testing kernel instead of the normal kernel. This can be used by other trigger work flows. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* CI: Allow building with internal toolchainHauke Mehrtens2022-12-031-1/+20
| | | | | | | | | | | This adds an option to build with internal toolchain. This can be used to build targets which are currently not build by the OpenWrt build bots and which needs their own toolchain build for every build. Building the toolchain takes about 30 minutes compared to using the external toolchain which takes some seconds. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* CI: Extract the OpenWrt building to own sub workflowHauke Mehrtens2022-12-034-341/+331
| | | | | | | | Extract the building of OpenWrt into an own workflow which is then triggered by the kernel.yml and packages.yml workflow with different inputs. This allows us to share much of the code of the workflow. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* CI: Simplify if conditionsHauke Mehrtens2022-12-032-2/+2
| | | | | | There is no need to put a ${{ }} around the if conditions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: switch default kernel to 5.15Stijn Segers2022-12-021-2/+1
| | | | | | | | | | | | | In light of https://github.com/openwrt/openwrt/issues/11077, switch mvebu to 5.15 which has been the testing kernel on this target since April - over half a year. Run-tested on the following subtargets: * cortexa9 (Turris Omnia - 03f41b1eb2f15ab06d5800274be6a67c64e2a629) * cortexa72 (MikroTik RB5009UG+S+IN) Tested-by: Enrico Mioso <mrkiko.rs@gmail.com> [GL-MV1000] Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* realtek: fix dell typoJan-Niklas Burfeind2022-12-011-3/+3
| | | | | | | should be add/delete or abbreviated add/del Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* realtek: refactor keep vlan tag setup, fix tagged forwardingLuiz Angelo Daros de Luca2022-12-017-23/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code in dsa.c:rtl83xx_port_enable() was trying to set vlan_port_tag_sts_ctrl while dealing with differences between SoCs. However, not only that register has a different address, the register structure and even the 2-bit value semantic changes for each SoC. The vlan_port_tag_sts_ctrl field was dropped and converted into a vlan_port_keep_incoming_tag_set() function that abstracts the different between SoCs. The macro referencing that register migrated to the SoC specific c file as it will be privately used by each file. All magic numbers were converted into macros using BITMASK and FIELD_PREP. The vlan_port_tag_sts_ctrl debugfs was dropped for now as it is already broken for rtl93xx. The best place for SoC specific code might be in each respective c file and not in if/else clauses. The final result is: rtl838x: set ITAG_STS=TAGGED, same as before rtl839x: set ITAG_STS=TAGGED instead of IGR_P_ITAG_KEEP=0x1, fixing forwarding of tagged packets rtl930x: set EGR_ITAG_STS=TAGGED instead of IGR_P_ITAG=0x1, possibly fixing forwarding of tagged packets rtl931x: set EGR_ITAG_STS=TAGGED instead of OTPID_KEEP=0x1, possibly fixing forwarding of tagged packets Without (EGR_)ITAG_STS=TAGGED, at least for rtl839x, forwarded packets will drop the vlan tag while packets from the CPU will still have the correct tag. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* realtek: Fix rtl930x speed status accessorOlliver Schinagl2022-12-011-3/+3
| | | | | | | | | | | | | | The rtl930x speed status registers require 4 bits to indicate the speed status. As such, we want to divide by 8. To make things consistent with the rest of this code, use a bitshift however. This bug probably won't affect many users yet, as there aren't many rtl930x switches in the wild yet with more then 10 ports, and thus a low-impact bugfix. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> [also fix port field extraction] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* CI: labeler: fix wrong label for pr targeting stable branchChristian Marangi2022-12-011-3/+3
| | | | | | | | | The label used for stable branch is in the form of release/[0-9][0-9].[0-9][0-9] Currently we apply the name of the target branch as the label, fix this and correctly use the current label. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* CI: add support to tag pr targeting stable branchChristian Marangi2022-12-011-0/+14
| | | | | | | | Add support to tag pr targeting stable branch matching the simple regex of openwrt-[0-9][0-9].[0-9][0-9]. The tag that will be added will match the pr target branch. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* uboot-mediatek: bpi-r3: raise CONFIG_LMB_MAX_REGIONS to 64Daniel Golle2022-11-291-6/+8
| | | | | | | | Raise CONFIG_LMB_MAX_REGIONS to 64 as there are going to be more than 8 (the default value) reserved regions to allow supporting offloading Wireless-to-Ethernet traffic on MT7986. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: add option to expose additional paths to jailDaniel Golle2022-11-272-1/+8
| | | | | | | | | | Add new UCI list 'addn_mount' allowing the expose additional filesystem paths to the jailed dnsmasq process. This is useful e.g. in case of manually configured includes to the configuration file or symlinks pointing outside of the exposed paths as used by e.g. the safe-search package in the packages feed. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: add support for Mikrotik wAP R ac / LTE / LTE6Alexander Couzens2022-11-279-217/+347
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The Mikrotik wAP R AC is an outdoor, dual band, dual radio (802.11ac) AP with a miniPCIe slot for a LTE modem. The wAP R AC is similar to the wAP AC but with the miniPCIe slot. The wAP R AC requires installing a LTE modem. The wAP LTE and wAP LTE6 comes with a LTE modem installed. See https://mikrotik.com/product/wap_r_ac for more info. Specifications: - SoC: Qualcomm Atheros IPQ4018 - CPU: 4x ARM Cortex A7 - RAM: 128MB - Storage: 16MB NOR flash - Wireless: - Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, internal antenna - Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, internal antenna - Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 2x 1000/100/10 ports one with 802.3af/at PoE in - 1x Mini PCI-E port (USB2) Installation: Boot the initramfs image via TFTP, then flash the sysupgrade image using sysupgrade. Details at https://openwrt.org/toh/mikrotik/common. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* airoha: disable swconfigAleksander Jan Bajkowski2022-11-271-1/+0
| | | | | | | | Swconfig isn't used by this target and can be disabled for this reason. Airoha doesn't even have an Ethernet driver. In the future, this target should get a DSA driver. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* airoha: refresh configAleksander Jan Bajkowski2022-11-271-4/+4
| | | | | | | This was done by executing these command: $ time make kernel_oldconfig CONFIG_TARGET=platform Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* layerscape: kmod-ppfe: Use ppfe driver as modulePawel Dembicki2022-11-273-5/+5
| | | | | | | | | | | In 8274451cb86 kmod-ppfe was changed to built-in because CONFIG_FSL_PPFE was binary. In 5.10 and 5.15 kernel, PPFE driver can be build as module. This patch switch kmod-ppfe from build-in to loadable module. Loadable module helps to avoid hazard: driver is looking for firmware file before mount root. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* layerscape: switch kernel testing to 5.15Pawel Dembicki2022-11-271-1/+1
| | | | | | | | | Let's test layerscape with 5.15 kernel. Run tested: LS1012A-FRDM, LS1046A-RDB (nor and sd-boot images), LS1021A-IOT (By @ArtelMike with u-boot fix) Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* layerscape: Switch LS1012A-FRDM initramfs to gzipPawel Dembicki2022-11-272-2/+1
| | | | | | | | | | At this moment LS1012A-FRDM have uncompressed initramfs image. Error was caused, because gzip extract area overlap image. Let's change loadaddr and enable gzip initramfs images again. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* layerscape: remove kernel 5.4 dependencesPawel Dembicki2022-11-271-28/+0
| | | | | | 5.4 kernel was removed. Let's clean old dependences. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* layerscape: 5.15: refresh kernel configPawel Dembicki2022-11-272-28/+42
| | | | | | Done by 'make kernel_oldconfig'. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-20 15:02:09 +0000