aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: add mesh fast-rx supportFelix Fietkau2023-03-021-0/+77
| | | | | | | This helps bring down rx CPU usage by avoiding calls to the rx handlers in the slow path. Supports forwarding and local rx, including A-MSDU. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix mtk dsa tag paddingFelix Fietkau2023-03-023-9/+7
| | | | | | | | | The padding intended to avoid corrupted non-zero padding payload was accidentally adding too many padding bytes, tripping up some setups. Fix this by using eth_skb_pad instead. Fixes #11942. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* linux-firmware: add mt7986 offload firmwareFelix Fietkau2023-03-022-1/+11
| | | | | | | This is needed for WED support on MT7986. Enable it by default for the filogic subtarget. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2023-03-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | 71d84bfb343e wifi: mt76: mt76x0u: report firmware version through ethtool 99d13130b517 wifi: mt76: support ww power config in dts node 09c614734880 Revert "wifi: mt76: mt7996: rely on mt76_connac2_mac_decode_he_radiotap" e1c9c1cb50a8 mt76: mt7921: Let PCI core handle power state and use pm_sleep_ptr() 34064dbcd72a wifi: mt76: mt7921e: add pci .shutdown() support 18ccfa73a9e2 wifi: mt76: remove redundent MCU_UNI_CMD_* definitions 282845ce7f3d wifi: mt76: mt7921: fix wrong command to set STA channel 546934dacfd4 wifi: mt76: mt7921: fix PCI DMA hang after reboot fc2ed0dfc5b0 wifi: mt76: mt7996: Remove unneeded semicolon 1b602db9c235 wifi: mt76: mt7915: unlock on error in mt7915_thermal_temp_store() ce2438aa616a wifi: mt76: mt7996: fix radiotap bitfield 17ec2146b8f0 wifi: mt76: dynamic channel bandwidth changes in AP mode ab2d3650a456 wifi: mt76: mt7915: expose device tree match table 90d78253498e wifi: mt76: mt7915: add dev->hif2 support for mt7916 WED device a69c34a60451 wifi: mt76: mt7915: rework init flow in mt7915_thermal_init() 39079b5e44a7 wifi: mt76: drop the incorrect scatter and gather frame f9ca70d6367a wifi: mt76: mt7915: add back 160MHz channel width support for MT7915 eff7666e1aa4 wifi: mt76: handle failure of vzalloc in mt7615_coredump_work 920bc6e1fc8e wifi: mt76: do not run mt76_unregister_device() on unregistered hw b0721b96927b wifi: mt76: connac: refresh tx session timer for WED device c32d6d849c43 wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add patch for allowing the driver to refresh aggregation sessionsFelix Fietkau2023-03-021-0/+60
| | | | | | Required by a mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport upstream HE/VHT capability handling changesFelix Fietkau2023-03-022-0/+136
| | | | | | Will be required by an mt76 update at some point Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: sync mesh fast xmit patch with upstream requested changesFelix Fietkau2023-03-021-19/+13
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* toolchain/binutils: switch to version 2.40 by defaultHauke Mehrtens2023-03-012-2/+2
| | | | | | | | | | | | | | | | This was build tested with all core packages on all targets successfully. This was run tested on the following systems: * lantiq/xrx200 musl * x86/64 musl * x86/64 glibc * malta/be The size of some of the initramfs images from lantiq/xrx increased by 240 bytes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/binutils: backport stable patchesHauke Mehrtens2023-03-0111-0/+2674
| | | | | | | | | | | | | | | | | | | | Add the patches with real changes from the binutils 2.40 stable branch. I am not aware that we ran into any of these problems, but I think it is better to take the existing stable patches. They were exported like this: git format-patch binutils-2_40...origin/binutils-2_40-branch I removed the patches changing the version numbers and updating the translations only. I removed the following patches: *Automatic-date-updat* 001-Re-enable-development.-Update-version-to-2.40.0.patch 004-Updated-translations-for-the-gas-and-binutils-sub-di.patch 015-Updated-Swedish-translation-for-the-binutils-sub-dir.patch 027-Updated-Swedish-translation-for-the-binutils-sub-dir.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: fix hwmon-gsc driverTim Harvey2023-03-014-337/+19
| | | | | | | | | Fix hwmon-gsc driver by replacing out-of-tree hwmon-gsc driver with in-tree driver that was merged in Linux v5.8: - remove the old out-of-tree module - add configuration for the in-tree modules Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* mt7621: move uboot-envtools to DEFAULT_PACKAGESBjørn Mork2023-03-012-178/+194
| | | | | | | | | Several devices depend on fw_printenv during sysupgrade. Make sure it always is present in all images, including initramfs images built by the buildbots. Fixes: 2449a632084b ("ramips: mt7621: Add support for ZyXEL NR7101") Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ramips: rt5350: enable lzma-loader for ALLNET ALL5003Sergio Paracuellos2023-03-011-0/+1
| | | | | | | Fixes the boot loader LZMA decompression issue: LZMA ERROR 1 - must RESET board to recover Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
* kexec-tools: update to 2.0.26Nick Hainke2023-03-012-55/+3
| | | | | | | | | | | | | | | Release Notes: - 2.0.22: https://www.spinics.net/lists/kexec/msg26864.html - 2.0.23: https://www.spinics.net/lists/kexec/msg27693.html - 2.0.24: https://www.spinics.net/lists/kexec/msg28922.html - 2.0.25: https://lore.kernel.org/all/YuYl22cyGldQQc5m@vergenet.net/ - 2.0.26: https://www.spinics.net/lists/kexec/msg30743.html Remove upstreamed patch: - 001-arm-do-not-copy-magic-4-bytes-of-appended-DTB-in-zIm.patch Tested-by: Linhui Liu <liulinhui36@gmail.com> # x86_64 Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: add tty led trigger kernel module packageFlorian Eckert2023-03-011-0/+17
| | | | | | | This allows LEDs to be controlled by activity on ttys which includes serial devices like '/dev/ttyS0'. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* kernel: bump 5.15 to 5.15.96John Audia2023-02-2824-26/+26
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.95John Audia2023-02-2818-294/+299
| | | | | | | | | | | | | | | | | | | | | Removed upstreamed: backport-5.15/807-v6.1-0003-nvmem-core-add-error-handling-for-dev_set_name.patch[1] bcm47xx/patches-5.15/070-net-bgmac-fix-BCM5358-support-by-setting-correct-fla.patch[2] Added fix: backport-5.15/883-0001-net-Remove-WARN_ON_ONCE-sk-sk_forward_alloc-from-sk_.patch[3] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.95&id=14eea6449473c1f55e196cc104ba16d144465869 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.95&id=2603a5ca6223bb3a88814e2728335eec14f715ab 3. https://lore.kernel.org/stable/20230227211548.13923-1-kuniyu@amazon.com Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* fstools: update to the latest masterRafał Miłecki2023-02-281-3/+3
| | | | | | bfe882d libblkid-tiny: add exfat superblock support Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm47xx: fix bgmac support for BCM5358Rafał Miłecki2023-02-274-0/+244
| | | | | | | Fix two long-standing regressions. Fixes: https://github.com/openwrt/openwrt/issues/8278 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm47xx: add pending devices supportRafał Miłecki2023-02-274-0/+252
| | | | | | This includes Lines E2500 V2 and Huawei B593u-12. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm47xx: reorder MIPS BCM47XX patchesRafał Miłecki2023-02-2712-36/+36
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: fix mesh path discovery based on unicast packetsFelix Fietkau2023-02-261-0/+52
| | | | | | | | | If a packet has reached its intended destination, it was bumped to the code that accepts it, without first checking if a mesh_path needs to be created based on the discovered source. Fix this by moving the destination address check further down Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: rework mesh fast xmit implementationFelix Fietkau2023-02-264-431/+506
| | | | | | | Refactor in order to make use of generic fast xmit functions Fix issues with mesh SA/DA addressing Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeontx: add f2fs and ext4 supportTim Harvey2023-02-262-1/+4
| | | | | | | | Add both ext4 and f2fs support for overlayfs. The fstools mount_root application will choose f2fs if the overlay volume space available exceeds 100MB, otherwise ext4 is used. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* octeontx: add default packages for on-board devicesTim Harvey2023-02-261-0/+4
| | | | | | | | | | | | | | | The Gateworks Newport boards supported by the octeontx target have the following on-board devices: - Gateworks System Controller - GPIO buttons - GPIO leds - GPS PPS - Accelerometer - MCP251X CAN controller Add kernel drivers for these devices in DEFAULT_PACKAGES Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ath79: add support for MikroTik RouterBOARD 911 Lite2/Lite5Tomasz Maciej Nowak2023-02-265-9/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Forward-port from ar71xx target the board introduced in commit eb9e3651dd1a (" ar71xx: add support for the MikroTik RB911-2Hn/5Hn boards"). Citing: The patch adds support for the MikroTik RB911-2Hn (911 Lite2) and the RB911-5Hn (911 Lite5) boards: https://mikrotik.com/product/RB911-2Hn https://mikrotik.com/product/RB911-5Hn The two boards are using the same hardware design, the only difference between the two is the supported wireless band. Specifications: * SoC: Atheros AR9344 (600MHz) * RAM: 64MiB * Storage: 16 MiB SPI NOR flash * Ethernet: 1x100M (Passive PoE in) * Wireless: AR9344 built-in wireless MAC, single chain 802.11b/g/n (911-2Hn) or 802.11a/g/n (911-5Hn) Notes: * Older versions of these boards might be equipped with a NAND flash chip instead of the SPI NOR device. Those boards are not supported (yet).[1] * The MikroTik RB911-5HnD (911 Lite5 Dual) board also uses the same hardware. Support for that can be added later with little effort probably.[2] End of citation. Follow intallation instruction from that commit message, using openwrt-ath79-mikrotik-mikrotik_routerboard-911-lite-initramfs-kernel.bin and openwrt-ath79-mikrotik-mikrotik_routerboard-911-lite-squashfs-sysupgrade.bin images found in ath79/mikrotik directory. Be advised that the board accepts 10-30 V on PoE input. Known issues Compared to ar71xx target image, there is still small leak of current to user LED, which makes it lit, although weaker, even if brightness is set to 0. The cause of that is still unknown. 1. https://github.com/openwrt/openwrt/pull/3652 2. RB911-5HnD should work with this commit or with [1], depending on what flash topology was used. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ath79: mikrotik: stack ar9344 devices to single dtsiTomasz Maciej Nowak2023-02-265-271/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of boards from MikroTik with AR9344 SoC (supported and un-supported) replicate the same schematic, so stack common device nodes to a single dtsi. ar9344_mikrotik_routerboard-16m-nor.dtsi: - remove include paragraph and wmac node, make it single nor flash node for others dts to include ar9344_mikrotik_routerboard-lhg-5nd.dts: - move all of the nodes to new file ar9344_mikrotik_routerboard.dtsi and leave only power, user and lan LEDs which differ from sxt-5nd-r2 and other yet unsupported devices ar9344_mikrotik_routerboard-sxt-5n.dtsi: - remove, it made no sense to keep it, as only ar9344_mikrotik_routerboard-sxt-5nd-r2.dts included this file and added only compatible and model ar9344_mikrotik_routerboard-sxt-5nd-r2.dts: - include ar9344_mikrotik_routerboard.dtsi - add nand gpio activating node, beeper, additional LEDs and flash chips which previously have been in ar9344_mikrotik_routerboard-sxt-5n.dtsi ar9344_mikrotik_routerboard.dtsi: - inherited most of the content from ar9344_mikrotik_routerboard-lhg-5nd.dts except three LEDs - add wmac node, removed from ar9344_mikrotik_routerboard-16m-nor.dtsi Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* build: fix for sourcing targets image config installed via feedsPrasun Maiti2023-02-261-0/+1
| | | | | | | | Sourcing of image/Config.in will not happen When a target is installed from target/linux/feeds/ Signed-off-by: Prasun Maiti <prasunmaiti87@gmail.com> Acked-by: Petr Štetiar <ynezz@true.cz>
* treewide: remove label = "cpu" from DSA dt-bindingArınç ÜNAL2023-02-2626-27/+0
| | | | | | | This is not used by the DSA dt-binding, so remove it from all devicetrees. Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9cc115d8d6f73dd260de1609182f3645844d6907 Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* bcm53xx: Add D-Link DWL-8610AP board settingsLinus Walleij2023-02-261-0/+3
| | | | | | | | The D-Link DWL-8610AP does not make use of the B53 switch like most equipment. It lies dormant and the machine is using eth0 and eth1 directly. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* bcm53xx: Add support for D-Link DWL-8610APLinus Walleij2023-02-261-0/+25
| | | | | | | | The D-Link DWL-8610AP is a pretty straight-forward BC53016 device, D-Link has invented a firmware package format which is a tar file, and we implement this for the factory image. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* sunxi: enable CONFIG_NVMEM_SYSFSJan-Niklas Burfeind2023-02-262-1/+1
| | | | | | | | | | in both the stable and the testing kernel h2+/h3/h5 devices have a Secure ID that can be read from `/sys/bus/nvmem/devices/sunxi-sid0/nvmem`. Enabling CONFIG_NVMEM_SYSFS grants sysfs access from userspace. Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* grub2: re-add test moduleTomasz Maciej Nowak2023-02-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | It seems more hardware needs early load of firmware when initialised to work properly (at least Intel hardware). One of previous case is CPU microcode, which this series[1] tried to change. The second one is Intel graphics IC, which needs firmware for controlling DMC circuit (switch conncted display to DC6 power state). As it stands, the i915 module is built-in and it seems the hardware can't cope with firmware loaded later from rootfs, it needs to be supplied when the module is loaded. Unfortunately we need bootloader to handle the load of firmware in this case, but as previously mentioned series[1], there was an error when initrd was hardcoded, instead of testing existence for it and then loading. To remedy this in later the 55b808e0c4be ('x86: image: add test module to bootloader') was commited. Which was later accidentally dropped when grub2 image creation was moved to packages. Therefore bring back test module, so we can test for cases of existing firmware in grub.cfg. 1. https://patchwork.ozlabs.org/project/openwrt/cover/20181120162044.16371-1-tomek_n@o2.pl Fixes: 5a5df62d95f5 ("x86/grub2: move grub2 image creation to package") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* x86: remove bootloader upgrade from preinitTomasz Maciej Nowak2023-02-262-20/+1
| | | | | | | | | This hack was to bring all existing installations to the newest GRUB version as fast as possible. Since 19.07.x is EoL we can assume this task is completed. Now sysupgrade will solely be responsible for bootloader upgrade. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* mvebu: add support for Buffalo LinkStation LS220DEDaniel González Cabanelas2023-02-267-0/+429
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Buffalo LinkStation LS220DE is a dual bay NAS, based on Marvell Armada 370 Hardware: SoC: Marvell Armada 88F6707 CPU: Cortex-A9 800 MHz, 1 core Flash 1: SPI-NOR 1 MiB (U-Boot) Flash 2: NAND 512 MiB (OS) RAM: DDR3 256 MiB Ethernet: 1x 1GbE USB: 1x 2.0 SATA: 2x 3Gb/s LEDs/Input: 5x / 2x (1x button, 1x slide-switch) Fan: 1x casing Flash instructions, from hard drive: 1. Get access to the "boot" partition at the hard drive where the stock firmware is installed. It can be done with acp-commander or by plugging the hard drive to a computer. 2. Backup the stock uImage: mv /boot/uImage.buffalo /boot/uImage.buffalo.bak 3. Move and rename the Openwrt initramfs image to the boot partition: mv openwrt-initramfs-kernel.bin /boot/uImage.buffalo 4. Power on the Linkstation with the hardrive inside. Now Openwrt will boot, but still not installed. 5. Connect via ssh to OpenWrt: ssh root@192.168.1.1 6. Rename boot files inside boot partition mount -t ext3 /dev/sda1 /mnt mv /mnt/uImage.buffalo /mnt/uImage.buffalo.openwrt.bak mv /mnt/initrd.buffalo /mnt/initrd.buffalo.bak 7. Format ubi partitions at the NAND flash ("kernel_ubi" and "ubi"): ubiformat /dev/mtd0 -y ubidetach -p /dev/mtd1 ubiformat /dev/mtd1 -y 8. Flash the sysupgrade image: sysupgrade -n openwrt-squashfs-sysupgrade.bin 9. Wait until it finish, the device will reboot with OpenWrt installed on the NAND flash. Restore the stock firmware: 1. Take the hard drive used for the installation and restore boot backup files to their original names: mount -t ext3 /dev/sda1 /mnt mv /mnt/uImage.buffalo.bak /mnt/uImage.buffalo mv /mnt/initrd.buffalo.bak /mnt/initrd.buffalo 2. Boot from the hard drive and perform a stock firmware update using the Buffalo utility. The NAND will be restored to the original state. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* octeontx: switch to Kernel 5.15Tim Harvey2023-02-263-474/+1
| | | | | | Switch over from testing version. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ramips: Alternative name Asus RT-AC750L for Asus RT-AC1200V2Karl Chan2023-02-261-0/+2
| | | | | | | | The Asus RT-AC750L is identical to the already supported Asus RT-AC1200V2. Use the ALT0 buildroot tags to show both devices. Reference : https://forum.openwrt.org/t/asus-rt-ac750l-is-the-same-as-rt-ac1200-v2/151783 Signed-off-by: Karl Chan <exkc@exkc.moe>
* mac80211: fix mesh fast xmit header cache flushFelix Fietkau2023-02-261-71/+159
| | | | | | split into multiple functions depending on sta, mpath or mpp Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ncurses: add alacritty terminfoTobias Hilbig2023-02-261-1/+2
| | | | | | | | Add terminfo file for the terminal emulator alacritty. https://github.com/alacritty/alacritty Signed-off-by: Tobias Hilbig <web.tobias@hilbig-ffb.de>
* dnsmasq: bump to v2.89Kevin Darbyshire-Bryant2023-02-253-5/+5
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ipq40xx: Linksys MR8300: fix the USB port powerDaniel González Cabanelas2023-02-251-1/+11
| | | | | | | | | | | | | The USB port on the MR8300 randomly fails to feed bus-powered devices. This is caused by a misconfigured pinmux. The GPIO68 should be used to enable the USB power (active low), but it's inside the NAND pinmux. This GPIO pin was found in the original firmware at a startup script in both MR8300 and EA8300. Therefore apply the fix for both boards. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* ramips: correct the PCIe port number for some mt7621 devicesFelix Baumann2023-02-252-2/+2
| | | | | | | | | | | | | | | | | | | | MT7621 uses a new PCIe driver in the 5.15+ kernel. Allocating wrong PCIe port will cause the PCIe NIC to not work properly. This commit fixes the wrong port numbers on Netgear R6220, WAC104 and WNDR3700 v5. According to bootlog, MT7612E (5GHz) is connected to pcie0, and MT7603E (2GHz) is connected to pcie2: [2.758986] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK) [2.772862] mt7621-pci 1e140000.pcie: PCIE0 enabled [2.782579] mt7621-pci 1e140000.pcie: PCIE2 enabled ... [3.009151] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000 [3.125715] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000 Tested-by: Maximilian Baumgartner <aufhaxer@googlemail.com> Signed-off-by: Shiji Yang <yangshiji66@qq.com> [felix.bau@gmx.de: adjust commit message for Netgear devices] Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* tools/squashfs4: fix PKG_MIRROR_HASHDaniel Golle2023-02-251-1/+1
| | | | | | | | | | | The hash currently matches neither the SHA256 of the Github download nor the hash of the archive generated by the OpenWrt build system. (and yes, they differ...) Set hash of Github-generated tarball. Fixes: 30f2d516ba ("tools/squashfs4: add new tool for squashfs4 images") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: setup effective thermal zones on Puzzle M901 and M902Daniel Golle2023-02-253-30/+70
| | | | | | | Assign fan with 4 active cooling levels to be used for the main CPU as well as external SerDes units. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: puzzle: fix fan thermal cooling driverDaniel Golle2023-02-252-46/+110
| | | | | | | | | | | | Several fixes for the Puzzle WT61P803 hwmon driver were needed to make it behave well as thermal cooling device: - wire-up cooling device with OF node in device tree - properly parse cooling-levels (u32 with range check vs. u8) - actually use cooling-levels - keep current state and only write to uC if state has changed (avoids flooding the uC with commands which will result in uC crashing) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: update to the latest versionHauke Mehrtens2023-02-251-4/+4
| | | | | | | | | | ed65a00 netifd: bridge: Fix format string position 19372d8 netifd: Fix multiple -Wsign-compare warnings 8ebf033 netifd: Do not return values in void function c77417a netifd: Explicitly zero initialize variables 463a120 netifd: Activate -Wextra compile warnings Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ustream-ssl: update to Git version 2023-02-25Hauke Mehrtens2023-02-251-4/+4
| | | | | | 498f6e2 ustream-mbedtls: Use getrandom() instead of /dev/urandom Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for GL.iNet GL-X1200Xinfa Deng2023-02-256-1/+296
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for GL-X1200. Specification: - SOC: QCA9563 (775MHz) - Flash: 16 MiB - RAM: 128 MiB DDR2 - Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN - Wireless: QCA9563(2.4GHz) and QCA9886(5GHz) - SIM: 2x SIM card slots - MicroSD: 1x microSD slot - Antenna: 2x external 5dBi antennas - USB: 1x USB 2.0 port - Button: 1x reset button - LED: 16x LEDs (3x GPIO controllable) - UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND) - OEM U-Boot supplies HTTP/GUI access Implementation Notes ==================== Both the NOR and NAND variants boot off a NOR-based kernel, consistent with the OEM's firmware. The mode LEDs are * Boot, Running system * Failsafe 2G * Upgrade 5G Installation ============ Using sysupgrade ---------------- sysupgrade may be used to install a NAND image on a device running a NAND image or a NOR image on a device running a NOR image. It is recommended to *not* preserve config when upgrading from OEM firmware or previous versions of OpenWrt. No supported sysupgrade path should require "force". Transitioning from NOR to NAND can be accomplished Using U-Boot ------------ The OEM U-Boot can be put into a graphical, firmware-upload mode by holding down the button on the side of the router while applying power and for a bit more than five seconds following with the current OEM U-Boot. The power LED will come on, then the 5G LED will flash five times, about once a second. When the 5G LED stops flashing and the 2G LED lights solid, the router's U-Boot will provide an upload page at http://192.168.1.1/ Either a browser may be used to upload an image, or a utility such as curl may be used: curl -X POST -F gl_firmware=\@*-nand-squashfs-factory.img \ http://192.168.1.1/index.html or curl -X POST -F gl_firmware=\@*-nor-squashfs-sysupgrade.bin \ http://192.168.1.1/index.html Note that NOR vs. NAND is based on the file name extension. Signed-off-by: Xinfa Deng <xinfa.deng@gl-inet.com>
* toolchain: remove references to $(LIBC)/utils subtargetMichael Pratt2023-02-251-3/+0
| | | | | | | | | | | The utils subtarget was used for uClibc and eglibc which are both obsolete and replaced in Openwrt by mainline musl and glibc, which do not have a utils Makefile target. Ref: 5d19a38d8 ("toolchain: sync eglibc headers/build split with uclibc changes") Fixes: 63fb17520 ("toolchain: remove uClibc-ng") Suggested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Michael Pratt <mcpratt@pm.me>
* toolchain: cleanup dependenciesMichael Pratt2023-02-251-4/+3
| | | | | | | Reorganize dependencies between toolchain targets to save a line. This also puts them in a linear order which is easier to read. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* toolchain: fix stampfile dependencyMichael Pratt2023-02-251-2/+2
| | | | | | | | | | | | | | | | | | Use the gcc/final/install target stampfile as the prerequisite for the toolchain/compile target stampfile. The previous filename was also incorrect, the stampfile name format was changed (see reference) but was never updated here. The issue was never noticed because the usage of timestamp.pl was broken (fixed in previous commit) causing the extra prereq files passed to 'call stampfile' to never get checked at all. Fixes: 5149ed151 ("gcc: split up the build process into three distinct stages") Signed-off-by: Michael Pratt <mcpratt@pm.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-03 20:43:54 +0000