aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* at91/image/sama5.mk: check for sama5d4_xplained deviceSandeep Sheriker M2019-08-171-3/+7
| | | | | | | check for sama5d4_xplained device while copying at91bootstrap binary to sdcard image. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91: remove Build/at91-sdcard commandSandeep Sheriker M2019-08-171-35/+0
| | | | | | | remove at91-sdcard build command from Makefile as this is moved to respective subtarget Makefile. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91: add uboot environmentsSandeep Sheriker M2019-08-172-1/+24
| | | | | | add uboot environments to sdcard image Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91: move at91-sdcard command to sama5.mkSandeep Sheriker M2019-08-171-0/+33
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfigSandeep Sheriker M2019-08-172-6/+10
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91bootstrap: add support for at91sam9x5ekSandeep Sheriker M2019-08-171-0/+14
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91bootstrap: bump v3.8.10 to v3.8.12Sandeep Sheriker M2019-08-171-3/+2
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* uboot-at91: fix -Wformat-securitySandeep Sheriker M2019-08-172-1/+14
| | | | | | add patch to fix -Wformat-security warnings. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* uboot-at91: changed som1 ek default defconfigsSandeep Sheriker M2019-08-171-5/+5
| | | | | | | replaced som1 ek spi flash with qspi defconfig and mmc with mmc1 defconfig. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* uboot-at91: add at91sam9x5ek socSandeep Sheriker M2019-08-171-0/+9
| | | | | | add support to build u-boot binaries for at91sam9x5ek socs. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* uboot-at91: bump linux4sam_5.8 to linux4sam_6.0Sandeep Sheriker M2019-08-171-2/+2
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* ramips: fix switch ports settingsChen Minqiang2019-08-171-3/+6
| | | | | | | | This change the switch settings for: HC5661: 4 lan ports + 1 wan port Y1S: 2 lan ports(G port) + 2 lan ports(E port) + 1 wan port Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* ramips: hc5xxx: use switch trigger for ledsChen Minqiang2019-08-171-3/+7
| | | | | | | | | | netdev on eth0.2 can't show link status of wan port because eth0 is connected to builtin switch and is always link up. Use swconfig trigger instead. Signed-off-by: Chen Minqiang <ptpt52@gmail.com> [redo commit message] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: create DTSI for ar9341 TP-Link devicesAdrian Schmutzler2019-08-174-356/+152
| | | | | | | | | | This patch creates a shared DTSI for the TP-Link devices based on ar9341 as those share a lot of definitions. While at it, change from gpio-keys-polled to gpio-keys, remove unused pll-data and remove some inherited stuff, too. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: migrate TP-Link TL-MR3420v2 to ath79Lim Guo Wei2019-08-174-18/+221
| | | | | | | | | | | | | | | | | | | | | Specifications: - SoC: ar9341 - RAM: 32M - Flash: 4M - Ethernet: 5x FE ports - WiFi: ar9341-wmac Flash instruction: Upload generated factory firmware on vendor's web interface. This changes the key assignment compared to ar71xx support of this device, since of the two keys on the device one is used as combined Reset/WPS and the second one as WiFi on/off button. Despite, the reset button required GPIO_ACTIVE_HIGH to work correctly. Signed-off-by: Lim Guo Wei <limguowei@gmail.com> [redo commit message] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: add support for PISEN TS-D084xixiao zheng2019-08-173-0/+127
| | | | | | | | | | | | | | | | | | | | | PISEN TS-D084 is an wireless router with a battery and integrated power supply based on Atheros AR9331. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet - 1T1R 2.4 GHz (AR9331) - 1x USB 2.0 Flash instruction: Upload generated factory image through web interface. Signed-off-by: xixiao zheng <xixiaozheng64@gmail.com> [wrap commit message, add flash instruction] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: add support for ipTIME A604MSungbo Eo2019-08-174-2/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | ipTIME A604M is a 2.4/5GHz band AC1200 router, based on MediaTek MT7628AN. Specifications: - SoC: MT7628AN - RAM: DDR2 64MB - Flash: SPI NOR 8MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7612EN - Ethernet: 5x 10/100Mbps - Switch: SoC internal - UART: - J1: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1 Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ath79: adtran,bsap1840/bsap1800-v2: move bootcount out of 02_networkChuanhong Guo2019-08-172-1/+4
| | | | | | | | | These device supports were introduced before /etc/init.d/bootcount and they had a bootcount reset done in /etc/board.d/02_network. Move it into /etc/init.d/bootcount instead. Suggested-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* treewide: sync bootcount scripts across targetsChuanhong Guo2019-08-176-18/+10
| | | | | | | | | | | | | | | This commit made the following changes to sync all bootcount scripts: 1. use boot() instead of start() This script only needs to be executed once when boot is complete. use boot() to make this explicit. 2. drop sourcing of /lib/functions.sh This is aready done in /etc/rc.common. 3. ramips: replace board name checking with a case Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ustream-ssl: update to latest git HEADHauke Mehrtens2019-08-171-3/+3
| | | | | | | e8f9c22 Revise supported ciphersuites 7e9e269 wolfssl, openssl: use TLS 1.3, set ciphersuites Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/e2fsprogs: Update to 1.45.3Daniel Engberg2019-08-174-36/+13
| | | | | | | | | Update e2fsprogs to 1.45.3 Remove OpenBSD patch Remove Darwin patch, neither macports or brew patches these files Add patch to avoid crond detection on host OS Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* target/x86/image: use qemu-img from STAGING_DIR_HOSTFlorian Eckert2019-08-171-2/+2
| | | | | | | | | | The host tool package qemu is build for the target x86. The installed tool qemu-img is needed to build vdi or vmdk images. In the image Makefile we use however the host installed qemu-img command and not the tool from the buildsystem. This commit force to use the already build qemu-img command from the openwrt toolchain. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* musl: ldso/dlsym: fix mips returning undef dlsymLuiz Angelo Daros de Luca2019-08-173-2/+138
| | | | | | | | | | | | | | | This happens only the second time a library is loaded by dlopen(). After lib1 is loaded, dlsym(lib1,"undef1") correctly resolves the undef symbol from lib1 dependencies. After the second library is loaded, dlsym(lib2,"undef1") was returning the address of "undef1" in lib2 instead of searching lib2 dependencies. Using upstream fix which now uses the same logic for relocation time and dlsym. Fixes openwrt/packages#9297 Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* gemini: Enable flash boot on reference design typeLinus Walleij2019-08-172-9/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The flash layout on the Storlink reference design for Gemini is using 2 MB flash for the kernel, and it also insists on overwriting the partition table with default values on every boot. The same is true for the SQ201. This poses a problem on recent OpenWrt firmware as the base zImage is bigger than 2 MB. At the same time there is a ramdisk partition of 6 MB that we don't really need. The partition table looks like this: Creating 7 MTD partitions on "30000000.flash": 0x000000000000-0x000000016000 : "BOOT" 0x000000120000-0x000000320000 : "Kern" 0x000000320000-0x000000920000 : "Ramdisk" 0x000000920000-0x000000f20000 : "Application" 0x000000f20000-0x000000f40000 : "VCTL" 0x000000f40000-0x000000fe0000 : "CurConf" 0x000000fe0000-0x000001000000 : "FIS directory" On boot the "Kern" partition is copied to RAM @0x01600000 and the "Ramdisk" partition is copied to RAM @0x00800000. Then the kernel is executed. The idea with this patch is to extend the "Kern" partition with the "Ramdisk" partition to get a full 8 MB to use for the kernel. Then we put the OpenWrt JFFS2 rootfs inside the "Application" partition. We create a small assembly loop that we prepend to the "Kern" image that will copy the "Kern" from 0x0160000 and the "Ramdisk" from 0x00800000 and put them in consecutive space at 0x00400000 and execute it from there, using "Application" as rootfs. We generate 3 main files: - zImage - contains the assembly bootstrap loop and the first part of the generated kernel image - rd.gz - contains the second part of the generated kernel image - hddapp.tgz - contains the root filesystem On the SQ201 I flash these manually using the native boot loader PLATO, "Y" alternative for the zImage, "R" for the rd.gz image and "A" for hddapp.tgz. This works fine and I can now boot to prompt on the SQ201 with nothing but flash. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Add copy-kernel utility packageLinus Walleij2019-08-173-0/+78
| | | | | | | | | | | This package just contains a small Gemini-only assembler bootstrap loop to copy the kernel from the two fragments (previously zImage at 0x01600000 and initramdisk at 0x00800000) into one big zImage of up to 8 MB at 0x00400000. It will be built on demand from the Gemini image Makefile. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Fix up flash accessesLinus Walleij2019-08-172-0/+140
| | | | | | | | The SL93512r and the NAS4220B have Redboot partition tables (rely on these) and need to boot from mtdblock3. Add two patches from upstream to fix this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Fix up some confused pin config on SL93512rLinus Walleij2019-08-171-0/+54
| | | | | | Upstream patch fixing the errors in the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* zynq: remove kernel 4.14 supportLuis Araneda2019-08-174-846/+0
| | | | Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: switch to kernel 4.19Luis Araneda2019-08-171-1/+1
| | | | | | Use kernel 4.19 by default Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: k4.19: fix kernel panic on smp bring-upLuis Araneda2019-08-171-0/+35
| | | | | | | | | | | This fixes a kernel panic when validating the arguments of memcpy at runtime, which is enabled by generic's CONFIG_FORTIFY_SOURCE for k4.19 This wasn't triggered on 4.14, as ARCH_HAS_FORTIFY_SOURCE was added on k4.17 for the ARM architecture Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: kernel: use some configs provided by genericLuis Araneda2019-08-171-9/+1
| | | | | | | | | - Select CONFIG_PREEMPT_NONE (server) instead of CONFIG_PREEMPT (low-latency desktop) - Remove CONFIG_USELIB - Remove CONFIG_SYSCTL_SYSCALL Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: add k4.19 configLuis Araneda2019-08-171-0/+664
| | | | | | | Copied from kernel 4.14 and refreshed with make kernel_oldconfig Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* wolfssl: bump to 4.1.0-stableEneas U de Queiroz2019-08-175-56/+16
| | | | | | | | | | | | | | | | | Always build AES-GCM support. Unnecessary patches were removed. This includes two vulnerability fixes: CVE-2019-11873: a potential buffer overflow case with the TLSv1.3 PSK extension parsing. CVE-2019-13628 (currently assigned-only): potential leak of nonce sizes when performing ECDSA signing operations. The leak is considered to be difficult to exploit but it could potentially be used maliciously to perform a lattice based timing attack. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* bzip2: Update to 1.0.8Rosen Penev2019-08-173-19/+34
| | | | | | | | | | | | | | | | It seems bzip2 was abandoned by the author and adopted by the sourceware people. The last release of bzip2 was from 2010. Several security bugs were fixed as well as others. Fixed up PKG_LICENSE to be compatible with SPDX. Changed URLs to point to the new home. Added patch that gets rid of deprecated utime function and switches it to utimensat. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* build: fix indent in image-commands.mkAdrian Schmutzler2019-08-171-1/+1
| | | | | | Convert leading spaces to tab to match rest of the file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: Update to version 5.3-rc4-1Hauke Mehrtens2019-08-1748-1450/+231
| | | | | | | | | The removed patches were applied upstream. The type of the RT2X00_LIB_EEPROM config option was changed to bool, because boolean is an invalid value and the new kconfig system complained about this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.2.8-1Hauke Mehrtens2019-08-1718-72/+29
| | | | | | | This contains multiple fixes from the upstream kernel. The removed patch was merged upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mdadm: Use upstream fix for musl 1.1.23 compileHauke Mehrtens2019-08-173-221/+28
| | | | | Fixes: ba8aeb02eae2 ("mdadm: Fix compile with musl 1.1.23") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Allow CONFIG_IEEE80211W for all but mini variantHauke Mehrtens2019-08-171-6/+2
| | | | | | | | | This commit will activate CONFIG_IEEE80211W for all, but the mini variant when at least one driver supports it. This will add ieee80211w support for the mesh variant for example. Fixes: FS#2397 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Remove ROBO switch supportHauke Mehrtens2019-08-171-2/+0
| | | | | | The driver was removed from OpenWrt a long time ago. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lua5.3: include hpp headerColby Whitney2019-08-161-1/+2
| | | | | | The install was missing the hpp header. Adding that in. Signed-off-by: Colby Whitney <colby.whitney@luxul.com>
* mvebu: sysupgrade: sdcard: fix platform_do_upgrade_sdcardKlaus Kudielka2019-08-161-18/+16
| | | | | | | | | | | | Unconditionally execute the final case statement, even if the disk layout changed. This is necessary, to keep the original Turris Omnia flash instructions working: The disk layout WILL change, when switching from TurrisOS to OpenWRT. Without updating the uboot environment at the same time, the user would end up with an unbootable system. Fixes commit 2e5a0b81ec ("mvebu: sysupgrade: sdcard: keep user added ...") Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
* brcm63xx: do not build images for 16 MiB RAM devices by defaultJonas Gorski2019-08-161-0/+24
| | | | | | | | OpenWrt will run out of RAM while booting with the default package set, so let's not provide images that will likely fail. They can still be built manually through source or IB if needed. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* firewall: improve ipset supportKevin Darbyshire-Bryant2019-08-161-4/+4
| | | | | | | | | | | | | | | | | | | | Bump to latest git HEAD 509e673 firewall3: Improve ipset support The enabled option did not work properly for ipsets, as it was not checked on create/destroy of a set. After this commit, sets are only created/destroyed if enabled is set to true. Add support for reloading, or recreating, ipsets on firewall reload. By setting "reload_set" to true, the set will be destroyed and then re-created when the firewall is reloaded. Add support for the counters and comment extensions. By setting "counters" or "comment" to true, then counters or comments are added to the set. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* lantiq: unify Fritz!Box LED mappingsDavid Bauer2019-08-154-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit unifies the LED mapping of the AVM Fritz!Box routers, which have a combined Power/DSL LED. With the stock firmware, the Power LED has the following characteristics: - Blink when DSL sync is being established - Solid when DSL sync is present We can't completely resemble this behavior in OpenWrt. Currently, the Power LED is completely off, when DSL sync is missing. This is not really helpful, as a user might have the impression, that he bricked his device. Instead, map the Info-LED to the state of the DSL connection. There is no consistent behavior for the Info-LED in the stock firmware, as the user can set it's function by himself. The DSL connection state is one possible option for the Info LED there. Also use the red Power LED to indicate a running upgrade, in case the board has a two-color Power LED. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: remove SUPPORTED_DEVICES for TP-Link Archer D50 v1Adrian Schmutzler2019-08-151-1/+0
| | | | | | | This device has not been supported in ar71xx, so there is no need for an explicit SUPPORTED_DEVICES entry. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: use Power LED as System LED for TL-WR842Nv3David Bauer2019-08-151-6/+6
| | | | | | | | | | | The TP-Link TL-WR842N v3 has a software-controllable Power LED. The WPS LED is normally only used as a System LED, when the Power LED can't be controlled by software. Additionally, the Power LED is also the System LED for this board in ar71xx. Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq40xx: fix AVM NAND caldata extractionDavid Bauer2019-08-151-3/+15
| | | | | | | | | | | | | The AVM Fritz!Box 7530 (and probably other AVM IPQ4019 NAND devices) has it's caldata not stored consistently, but instead at currently 3 known possible offsets. As we get a non-zero exit code from fritz_cal_extract, simply try all three possible offsets on both bootloader partitions, until a matching caldata for each radio is found. Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 4.19 to 4.19.66Koen Vandeputte2019-08-1411-31/+31
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.138Koen Vandeputte2019-08-146-20/+20
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 12:16:54 +0000