aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* openssl: always build with GOST engine supportEneas U de Queiroz2021-02-233-18/+19
| | | | | | | | | | | | | | The packages feed has a proposed package for a GOST engine, which needs support from the main openssl library. It is a default option in OpenSSL. All that needs to be done here is to not disable it. Package increases by a net 1-byte, so it is not really really worth keeping this optional. This commit also includes a commented-out example engine configuration in openssl.cnf, as it is done for other available engines. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* ramips: overwrite reset gpio properties in DIR-860L DTSStijn Segers2021-02-231-0/+3
| | | | | | | | | | | | | | As suggested by Sergio, this adds GPIOs 19 and 8 explicitly into the DIR-860L DTS, so the PCI-E ports get reset and the N radio (radio1) on PCI-E port 1 comes up reliably. Fixes the following error that popped up in dmesg: [ 1.638942] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK) Suggested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Stijn Segers <foss@volatilesystems.org> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
* uboot-envtools: add support for ZyXEL GS-1900-8HP v1 and v2Stijn Segers2021-02-231-0/+2
| | | | | | This adds the necessary nuts and bolts for the uboot settings for both the ZyXEL GS1900-8HP v1 and v2. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* ramips: mt7621: enable SX150x driverSander Vanheule2021-02-231-0/+1
| | | | | | | | | | | | | | | | The Netgear R6800 and R6700v2 devices have a Semtech SX1503 GPIO expander controlling the device LEDs. This expander was initially supported on 4.14, but support was lost in the transition to 5.4. Since this driver cannot be built as a kernel module, enable it in the kernel config for all mt7621 devices. Run-tested on a Netgear R6800. Cc: Stijn Segers <foss@volatilesystems.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org>
* wolfssl: bump to v4.7.0-stableEneas U de Queiroz2021-02-235-92/+4
| | | | | | | | | | | | | | Biggest fix for this version is CVE-2021-3336, which has already been applied here. There are a couple of low severity security bug fixes as well. Three patches are no longer needed, and were removed; the one remaining was refreshed. This tool shows no ABI changes: https://abi-laboratory.pro/index.php?view=objects_report&l=wolfssl&v1=4.6.0&v2=4.7.0 Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* kernel: DSA roaming fix for Marvell mv88e6xxxDENG Qingfang2021-02-2330-0/+2365
| | | | | | | | | | | | | | | | | | | | | | | | | Marvell mv88e6xxx switch series cannot perform MAC learning from CPU-injected (FROM_CPU) DSA frames, which results in 2 issues. - excessive flooding, due to the fact that DSA treats those addresses as unknown - the risk of stale routes, which can lead to temporary packet loss Backport those patch series from netdev mailing list, which solve these issues by adding and clearing static entries to the switch's FDB. Add a hack patch to set default VID to 1 in port_fdb_{add,del}. Otherwise the static entries will be added to the switch's private FDB if VLAN filtering disabled, which will not work. The switch may generate an "ATU violation" warning when a client moves from the CPU port to a switch port because the static ATU entry added by DSA core still points to the CPU port. DSA core will then clear the static entry so it is not fatal. Disable the warning so it will not confuse users. Link: https://lore.kernel.org/netdev/20210106095136.224739-1-olteanv@gmail.com/ Link: https://lore.kernel.org/netdev/20210116012515.3152-1-tobias@waldekranz.com/ Ref: https://gitlab.nic.cz/turris/turris-build/-/issues/165 Signed-off-by: DENG Qingfang <dqfext@gmail.com>
* autotools.mk: fix gettext fixupRosen Penev2021-02-231-1/+1
| | | | | | | | The update to gettext 0.21 broke packages that use autotools and gettext because the sed line was failing with the new version. Fix with a better sed expression. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: add symbol CONFIG_POWER_RESET_LINKSTATIONAdrian Schmutzler2021-02-233-2/+1
| | | | | | | | Add symbol to generic config (this was added between 5.4 and 5.10), and remove it from the targets where it was added by kernel_oldconfig in the meantime. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* generic: add missing symbolsDavid Bauer2021-02-232-0/+2
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* wireguard: don't build on Linux 5.10Ilya Lipnitskiy2021-02-231-2/+2
| | | | | | | | | | | | There are efforts underway to bring wireguard in-tree for Linux 5.4 and to have a common build infrastructure for both 5.4 and 5.10 for kmod-wireguard[0]. Until then, restrict kmod-wireguard to build only on Linux 5.4, because the wireguard-compat package will not build on Linux 5.10. [0]: https://github.com/openwrt/openwrt/pull/3885 Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* kernel: 5.10: fix kmod build failuresIlya Lipnitskiy2021-02-236-16/+44
| | | | | | | | | | Modify existing modules to reflect their new location in Linux 5.10. Add missing dependenices. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> [enable CRYPTO_USER_API_ENABLE_OBSOLETE; add kmod-crypto-hash dependency to usb-net-rtl8152] Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: 5.10: fix rtl8812au-ct buildIlya Lipnitskiy2021-02-232-16/+9
| | | | | | | | Pull in upstream: https://github.com/greearb/rtl8812AU_8821AU_linux/commit/c8d243936fed0c5fe1d77a06b36d26f41c8c46f4 https://github.com/greearb/rtl8812AU_8821AU_linux/commit/1e9689c89fa627d2d764ba0e8359fd444fe8458f Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* arm-trusted-firmware-mediatek: use @OPENWRT mirror for blobsDaniel Golle2021-02-231-1/+1
| | | | | | | Now that mirrors have picked it up, switch to using the @OPENWRT mirror instead of hosting those files on Github. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: improve gpio control for Phicomm PSG1218Shiji Yang2021-02-233-20/+7
| | | | | | | | | | | Description: 1. From key and led config setting, we can find only "uartf" and "i2c" are used as gpio by check mt7620 datasheet. It's time to remove unused pin group. 2. PSG1218 only have three led, so we can remove ethernet led pinctrl. refer to Phicomm K2G. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mvebu: add 5.10 as a testing kernelRui Salvaterra2021-02-231-1/+1
| | | | | | | | | | | | | Keep 5.4 as stable until further validation. Tested on Turris Omnia (Rui Salvaterra) and ESPRESSObin v5 (Tomasz Maciej Nowak). Cortex-A{53,72} subtargets are only build-tested. Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [added comment about tests] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: fix the Turris Omnia device treeRui Salvaterra2021-02-233-0/+165
| | | | | | | | | Enable and fix hardware buffer management. Also fix the IRQ storm caused by a misconfiguration of the PCA9538 interrupt pin. Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mvebu: fix the patch numberingRui Salvaterra2021-02-233-0/+0
| | | | | | | | | | Make each logical patch group numbering contiguous. Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [add kernel version to backport] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: refresh 5.10 kconfigs/patchesRui Salvaterra2021-02-2337-2967/+33
| | | | | | | | Also delete already upstreamed patches/changes. Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mvebu: remove upstreamed DTS files in 5.10Adrian Schmutzler2021-02-233-0/+0
| | | | | | | Some armada-3720-espressobin-* files have been upstreamed, move these to files-5.4. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: copy 5.4 patches/kconfigs to 5.10Rui Salvaterra2021-02-2353-0/+5216
| | | | | | | | | | Just a simple copy, no refresh yet. Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [do not duplicate files] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: refresh the 5.4 kernel configsRui Salvaterra2021-02-233-283/+24
| | | | | | | | | Remove the implicit/inherited symbols. While not strictly necessary, this will make reviewing the diff between 5.4 and 5.10 easier. Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: add further generic kconfig symbolsRui Salvaterra2021-02-231-0/+7
| | | | | | | | | | This will make the specific kconfig smaller. Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [improved commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bmips: fix SMP CPU mappingÁlvaro Fernández Rojas2021-02-232-11/+58
| | | | | | | | SMP isn't supported on BCM6358 since it has a shared TLB. Some boards boot with CPU #1 instead of CPU #0, and this is currently not supported do to a smp-bmips bug. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: switch to accepted upstream patchÁlvaro Fernández Rojas2021-02-232-8/+25
| | | | | | This patch has been accepted and is going to be in linux v5.12. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: rename upstream patchesÁlvaro Fernández Rojas2021-02-239-0/+0
| | | | | | These patches were applied in linux v5.11, not v5.12. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* procd: update to git HEADDaniel Golle2021-02-231-3/+3
| | | | | | | 2be57ed cosmetics: provide compatible system info on Aarch64 37eed13 system: expose if system was booted from initramfs Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: bring back packageDaniel Golle2021-02-231-47/+98
| | | | | | | | * use binary provided by MediaTek to work-around 'bromimage' issue * refactor Makefile * add mt7622 1c variants (using binaries provided by MTK) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bmips: bcm6358: add watchdogÁlvaro Fernández Rojas2021-02-231-0/+9
| | | | | | | Watchdog node was missing in commit 029093a302. Fixes: 029093a302c9 ("bmips: add new target") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: remove unneeded downstream serial patchÁlvaro Fernández Rojas2021-02-232-12/+1
| | | | | | Disabling CONFIG_SERIAL_8250 makes the upstream serial driver work OOB. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: pinctrl: fix BCM6348 groupsDaniel González Cabanelas2021-02-235-58/+21
| | | | | | | | | | | | | | | | | | | | The current driver has some troubles: - Some groupings are wrong. - The pinctrl group0 owns pins never used (at least in Openwrt) for any pinmux. The driver hijacks all the pins on the group avoiding any other use, spite they're free. I.e. for buttons, causing this kernel error: [ 4.735928] gpio-keys-polled keys: unable to claim gpio 479, err=-22 [ 4.742642] gpio-keys-polled: probe of keys failed with error -22 - Minor errors about groupings on the documentation - Missing "diag" grouping in dtsi - Wrong groupings in dtsi Fix it by setting the correct groups. And relax the pin capturing, letting the gpios belonging to any group to be used for other purposes like buttons. This was the behavior with stock firmwares and old OpenWrt versions which never caused any trouble. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: bcm6358: fix EHCI/OHCI kernel panicsÁlvaro Fernández Rojas2021-02-232-0/+70
| | | | | | | ARCH_HAS_SYNC_DMA_FOR_CPU_ALL is causing kernel panics when EHCI or OHCI are enabled. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* imx6: remove redundant IMAGE_NAMEAdrian Schmutzler2021-02-231-2/+0
| | | | | | | | | | IMAGE_NAME is set twice for ventana, and the second value actually matches the default in image.mk. Remove both. Fixes: ded905ce431b ("imx6: extend cubox support to hummingboard, add support for building full images") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove redundant KERNEL_PREFIX definitionsPaul Spooren2021-02-234-7/+0
| | | | | | | | | | The variables KERNEL_INITRAMFS_PREFIX and KERNEL_PREFIX are already defined in include/image.mk and don't have to be redefined in the target Makefiles. Signed-off-by: Paul Spooren <mail@aparcar.org> [also cover imx6] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bmips: split base-files into subtargetsAdrian Schmutzler2021-02-235-6/+36
| | | | | | | | | Like done for several targets already, splitting base-files into subtarget will provide smaller images due to more specific distribution of files per subtarget and allow to use default cases more effectively. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bmips: add JFFS2 unaligned access patchÁlvaro Fernández Rojas2021-02-221-0/+26
| | | | | | This patch is also needed on bmips if SMP is enabled. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: bcm6368: fix bcm2835-rngÁlvaro Fernández Rojas2021-02-222-0/+76
| | | | | | | IPSEC needs a reset before using its HW RNG. Otherwise, the numbers generated won't be random at all. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: fix Phicomm PSG1218A switch port labelsShiji Yang2021-02-221-1/+1
| | | | | | | | The lan port sequence was reversed compared to the labels. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [improve commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: move aliases to the top in SoC DTSI filesAdrian Schmutzler2021-02-229-47/+47
| | | | | | | The aliases node is expected as one of the first entries, and having it there matches alphabetic sorting as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: drop redundant definitions of serial0 in aliasesAdrian Schmutzler2021-02-224-4/+0
| | | | | | | | These were redefines of the same value already set in the SoC dtsi files. Reported-by: Shiji Yang <yangshiji66@qq.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bmips: add new targetÁlvaro Fernández Rojas2021-02-2280-0/+12048
| | | | | | | | | | | | | | | | | This target has full device tree support, thus reducing the number of patches needed for bcm63xx, in which there's a patch for every board. The intention is to start with a minimal amount of downstream patches and start upstreaming all of them. Current status: - Enabling EHCI/OHCI on BCM6358 causes a kernel panic. - BCM63268 lacks Timer Clocks/Reset support. - No PCI/PCIe drivers. - No ethernet drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: limit name metadata to model nameÁlvaro Fernández Rojas2021-02-221-5/+1
| | | | | | | Since there are only 16 characters available, on most cases the vendor name will fit in the metadata, but the model name won't fit. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* image: add ModelNameLimit16Álvaro Fernández Rojas2021-02-221-0/+4
| | | | | | This script returns the model name limited to 16 characters. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx-cferam: select for bmips targetÁlvaro Fernández Rojas2021-02-221-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mtd: fixtrx: support CFE imagetag on bmips targetÁlvaro Fernández Rojas2021-02-221-0/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: mtdsplit: add support for BCM63XX CFE firmwareÁlvaro Fernández Rojas2021-02-225-0/+194
| | | | | | | | Broadcom CFE bootloader relies on a tag for identifying the current firmware, such as version, image start address, kernel address and size, rootfs size, board id, signatures, etc. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ramips: correct/add Phicomm K2x WAN/label MAC addressShiji Yang2021-02-221-4/+4
| | | | | | | | | | | | | | Phicomm K2G: add missing label_mac Phicomm PSG1218A & PSG1218B: The previous wan mac was set as factory@0x28 +1 (originally based on the default case for the ramips target), but the correct wan mac is factory@0x28 -1, being equal to factory@0x2e. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [minor commit title/message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: bcm63268: fix GPIO interruptsÁlvaro Fernández Rojas2021-02-221-1/+1
| | | | | | pinctrl should rely on external interrupt controller for GPIO interrupts. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* generic: add missing symbolDavid Bauer2021-02-221-0/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: enable Regulator support for targetDavid Bauer2021-02-225-3/+2
| | | | | | | | | | | | Regulator support was enabled on all subtargets except for ath79-nand. With Kernel 5.10, AT803x requires Regulator support, thus enabling on the complete target, as ath79-nand requires AT803x. While this is only required on Kernel 5.10, enable it also on 5.4. We have no major size-constraint, so enabling it on 5.4 allows us to clean up the occurences in the subtarget configuration. Signed-off-by: David Bauer <mail@david-bauer.net>
* download: remove broken mirrorsDavid Bauer2021-02-221-2/+0
| | | | | | These mirrors don't exist anymore. Remove them. Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 06:55:30 +0000