aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.201Hauke Mehrtens2023-11-256-55/+8
| | | | | | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.201 Removed upstreamed: x86/patches-5.10/120-hwrng-geode-fix-accessing-registers.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.201&id=ffb3483c4b0bff1951e4020b9d73e4c13bf7fe93 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: add support for SNR-CPE-W4N-MT routerAlexey Bartenev2023-11-215-0/+149
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | General specification: - SoC Type: MediaTek MT7620N (580MHz) - ROM: 8 MB SPI-NOR (W25Q64FV) - RAM: 64 MB DDR (M13S5121632A) - Switch: MediaTek MT7530 - Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4) - Wireless 2.4 GHz: b/g/n - Buttons: 1 button (RESET) - Bootloader: U-Boot 1.1.3, MediaTek U-Boot: 5.0.0.5 - Power: 12 VDC, 1.0 A Flash by the native uploader in 2 stages: 1. Use the native uploader to flash an initramfs image. Choose openwrt-ramips-mt7620-snr_cpe-w4n-mt-initramfs-kernel.bin file by "Administration/Management/Firmware update/Choose File" in vendor's web interface (ip: 192.168.1.10, login: Admin, password: Admin). Wait ~160 seconds. 2. Flash a sysupgrade image via the initramfs image. Choose openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin file by "System/Backup/Flash Firmware/Flash image..." in LuCI web interface (ip: 192.168.1.1, login: root, no password). Wait ~240 seconds. Flash by U-Boot TFTP method: 1. Configure your PC with IP 192.168.1.131 2. Set up TFTP server and put the openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin image on your PC 3. Connect serial port (57600 8N1) and turn on the router. Then interrupt "U-Boot Boot Menu" by hitting 2 key (select "2: Load system code then write to Flash via TFTP."). Press Y key when show "Warning!! Erase Linux in Flash then burn new one. Are you sure? (Y/N)" Input device IP (192.168.1.1) ==:192.168.1.1 Input server IP (192.168.1.131) ==:192.168.1.131 Input Linux Kernel filename () ==: openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin 3. Wait ~120 seconds to complete flashing Signed-off-by: Alexey Bartenev <41exey@proton.me> (cherry picked from commit 7796c2d7ef5ff465c8c75ee294b0b5fb3165f4b9) [Fix merging conflict] Signed-off-by: Alexey Bartenev <41exey@proton.me>
* tools: fix firmware-utils dependsRosen Penev2023-11-211-1/+1
| | | | | | | | When firmware-utils was converted to use cmake, the dependency was not updated. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit b71affaf8bec62e3c12298b9ac399ef51cedcac7)
* tools/cmake: Build without some included libsRosen Penev2023-11-214-3/+46
| | | | | | | | | | Saves a little bit of time when compiling cmake. Added patches to fix searching liblzma and zlib. The issue is that because pkgconfig is not used, the system libraries get used. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 3848cf458ef998fc9971edd6a01cc9cdb43fbef9)
* tools/expat: build with autotools againRosen Penev2023-11-212-16/+15
| | | | | | | | Allows to set expat as a dependency to cmake and save on compilation time. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 89df3589e6237e5ad9b5cdd9f87c82987b200e37)
* tools/zlib: switch to configure scriptRosen Penev2023-11-212-15/+14
| | | | | | | A future commit will make tools/cmake use this. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit d602e7a969922121800e8f24d81cecdaab3aae75)
* kernel: bump 5.10 to 5.10.200Hauke Mehrtens2023-11-2115-25/+25
| | | | | | All patches automatically rebased. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: update to 5.6.4Nick Hainke2023-11-192-28/+3
| | | | | | | | | | | Releae Notes: https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.4-stable Remove upstreamed patch: - 001-fix-detection-of-cut-tool-in-configure.ac.patch Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit d83231603c60a1df7d0530c8766f0b71c6553b44)
* urngd: update to version 2023-11-01Hauke Mehrtens2023-11-191-3/+3
| | | | | | | | | Fix compilation with glibc 44365eb Deactivate _FORTIFY_SOURCE in jitterentropy-base.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit d62726b1e44f785d543e4625b19ca1f628adda6c)
* mbedtls: Update to version 2.28.5Hauke Mehrtens2023-11-191-2/+2
| | | | | | | | | This fixes some minor security problems. Changelog: https://github.com/Mbed-TLS/mbedtls/releases/tag/mbedtls-2.28.5 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [Removed 100-x509-crt-verify-SAN-iPAddress.patch for 22.03] (cherry picked from commit 9e1c5ad4b0c99c45927ccd44504cd8fdbbd03bb0)
* bsdiff: Add patches for CVEsHauke Mehrtens2023-11-194-13/+433
| | | | | | | | | | | | | Add two patches from Debian fixing CVEs in the bsdiff application. CVE-2014-9862: Heap vulnerability in bspatch CVE-2020-14315: Memory Corruption Vulnerability in bspatch Copied the patches from this location: https://salsa.debian.org/debian/bsdiff/-/blob/debian/latest/debian/patches/20-CVE-2014-9862.patch https://salsa.debian.org/debian/bsdiff/-/blob/debian/latest/debian/patches/33-CVE-2020-14315.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit cac723e8b8748938b8d80603578c60189fc32b24)
* wireless-regdb: update to 2023.09.01Yuu Toriyama2023-11-191-2/+2
| | | | | | | | | | | | Changes: 9dc0800 wireless-regdb: Update regulatory rules for Philippines (PH) 111ba89 wireless-regdb: Update regulatory rules for Egypt (EG) from March 2022 guidelines ae1421f wireless-regdb: Update regulatory info for Türkiye (TR) 20e5b73 wireless-regdb: Update regulatory rules for Australia (AU) for June 2023 991b1ef wireless-regdb: update regulatory database based on preceding changes Signed-off-by: Yuu Toriyama <PascalCoffeeLake@gmail.com> (cherry picked from commit 0e13363de6879a1a8b7d4d2739c92122f2df693e)
* ath79: image: allow changing kernel option in mkubntimageTomasz Maciej Nowak2023-11-191-1/+1
| | | | | | | | | | | Backport didn't include changes to mkubntimage invocation, which allowed to pass arguments. This in result produces broken routerstation factory images, which have kernel embedded as kernel partition instead of LZMA loader. Fixes: #13260 Fixes: 8e09f9ffc3cc ("ath79: switch some RedBoot based devices to OKLI loader") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* scripts/dump-target-info.pl: add new function to DUMP devicesChristian Marangi2023-11-151-1/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add new function to dump-targer-info.pl to DUMP devices provided a matching target/subtarget. Example: ./scripts/dump-targer-info.pl devices ipq806x/generic will produce the sorted list of devices defined in the following format: device_id device_name Devices may have alternative names, the script will dump each alternative name in the same line of device_id. Following the pattern: device_id "PRIMARY DEVICE NAME" "ALT0 DEVICE NAME" "ALT1 DEVICE NAME" ... Example: tplink_ad7200 "TP-Link AD7200 v1/v2" "TP-Link Talon AD7200 v1/v2" Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 943c153cdd695904b9b7fe44800fc3546644973e)
* treewide: fix shell errors during dump stagePetr Štetiar2023-11-133-0/+9
| | | | | | | | | | | | | | | | Fixes following issues: bash: -c: line 1: `echo 1686820180<LINUX_VERMAGIC> | /staging_dir/host/bin/mkhash md5 | cut -b1-8' bash: -c: line 1: `echo 1686820180<LINUX_VERMAGIC> | /staging_dir/host/bin/mkhash md5 | sed -E 's/(.{8})(.{4})(.{4})(.{4})(.{10})../\1-\2-\3-\4-\500/'' bash: -c: line 1: syntax error near unexpected token `|' bash: line 1: *1024*1024: syntax error: operand expected (error token is "*1024*1024") bash: line 1: (64 + ): syntax error: operand expected (error token is ")") expr: syntax error: missing argument after '+' Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 8fc496be860192f8bd1f16913657626014c8863f) [ fix merge conflicts, adapt to 22.03 ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* scan.mk: do not silence output of dump phasePetr Štetiar2023-11-131-1/+2
| | | | | | | | | | | | | | | Make it easier to spot currently hidden issues: $ make defconfig V=sc ... Collecting target info: target/linux/airohabash: -c: line 1: syntax error near unexpected token `|' bash: -c: line 1: `echo 1686815253<LINUX_VERMAGIC> | staging_dir/host/bin/mkhash md5 | cut -b1-8' bash: -c: line 1: syntax error near unexpected token `|' bash: -c: line 1: `echo 1686815253<LINUX_VERMAGIC> | staging_dir/host/bin/mkhash md5 | sed -E 's/(.{8})(.{4})(.{4})(.{4})(.{10})../\1-\2-\3-\4-\500/'' ... Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit b522da5b16c7e5952d364b933b921786198f9fe5)
* scripts/getver.sh: prevent asking for negative rev-parseChristian Marangi2023-11-121-1/+1
| | | | | | | | | | | | | | | With the case of asking an invalid version that is too big, getver.sh might return an invalid output in the form of HEAD~-2260475641. This is caused by BASE_REV - GET_REV using a negative number. Prevent this by checking if BASE_REV - GET_REV actually return 0 or a positive number and set REV variable accordingly. With the following change, invalid revision number will result in unknown printed instead of the invalid HEAD~-NUMBERS output. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 9e49e0a6c4535d345084cc62c594be5cad23b911)
* hostapd: permit also channel 7 for 2.5GHz to be set to HT40PLUSChristian Marangi2023-11-091-1/+1
| | | | | | | | | Also channel 7 for 2.4GHz can be set to HT40PLUS. Permit this and add it to the list of the channels. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit b1c7b1bd67ca40289dfb7acd03e12ce43618d548) [ rework for openwrt-22.03 ]
* hostapd: fix broke noscan option for meshChristian Marangi2023-11-092-3/+3
| | | | | | | | | | | noscan option for mesh was broken and actually never applied. This is caused by a typo where ssid->noscan value is check instead of conf->noscan resulting in the logic swapped and broken. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 1b5ea2e199fcf391f88afd0322de449459399be4) [ rework for openwrt-22.03 ]
* mac80211: fix not set noscan option for wpa_supplicantChristian Marangi2023-11-091-2/+2
| | | | | | | | | | noscan option was changed to hostapd_noscan but the entry in wpa_supplicant was never updated resulting in the noscan option actually never set. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 1070fbce6e496da2dacf17c6e842a4369c4be71b) [ rework for openwrt-22.03 ]
* build: export GIT_CEILING_DIRECTORIES for package buildsJeffery To2023-11-082-0/+2
| | | | | | | | | | | | | | | | | | | A package may run git as part of its build process, and if the package source code is not from a git checkout, then git may traverse up the directory tree to find buildroot's repository directory (.git). For instance, Poetry Core, a Python build backend, will read the contents of .gitignore for paths to exclude when creating a Python package. If it finds buildroot's .gitignore file, then Poetry Core will exclude all of the package's files[1]. This exports GIT_CEILING_DIRECTORIES for both package and host builds so that git will not traverse beyond $(BUILD_DIR)/$(BUILD_DIR_HOST). [1]: https://github.com/python-poetry/poetry/issues/5547 Signed-off-by: Jeffery To <jeffery.to@gmail.com> (cherry picked from commit f597f34f3afa7bba8a2606490617688f1cea5a44)
* bcm53xx: refresh kernel configRafał Miłecki2023-11-061-0/+1
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 5.10 to 5.10.199Hauke Mehrtens2023-11-0226-48/+48
| | | | | | All patches automatically rebased. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.198Hauke Mehrtens2023-11-0211-22/+22
| | | | | | All patches automatically rebased. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: gcc: backport v11.3.0 fix for false positive VLA params warningsAndrey Erokhin2023-11-021-0/+192
| | | | | | | | | | | | | | | | | | | | | | | | | | | If the vla parameter has a const specifier, the compiler will warn about mismatched bounds: $ cat mwe.c extern void mwe(const int len, char buf[len]); void mwe(const int len, char buf[len]) {} $ make CFLAGS=-Wvla-parameter mwe.o cc -Wvla-parameter -c -o mwe.o mwe.c mwe.c:2:30: warning: argument 2 of type ‘char[len]’ declared with mismatched bound ‘len’ [-Wvla-parameter] 2 | void mwe(const int len, char buf[len]) {} | ~~~~~^~~~~~~~ mwe.c:1:37: note: previously declared as ‘char[len]’ with bound ‘len’ 1 | extern void mwe(const int len, char buf[len]); | ~~~~~^~~~~~~~ On some code bases it might result in a lot of false positive warnings, which can indeed be easily disabled, but on the other this workaround might hide some real issues, so lets rather fix the compiler and make it more reliable. References: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101289 Signed-off-by: Andrey Erokhin <a.erokhin@inango-systems.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> [commit message]
* ath79: increase the rfkill debounce interval for TP-Link Archer C7 v2Shiji Yang2023-10-311-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to circuit issue or silicon defect, sometimes the WiFi switch button of the Archer C7 v2 can be accidentally triggered multiple times in one second. This will cause WiFi to be unexpectedly shut down and trigger 'irq 23: nobody cared'[1] warning. Increasing the key debounce interval to 1000 ms can fix this issue. This patch also add the missing rfkill key label. [1] Warning Log: ``` [87765.218511] irq 23: nobody cared (try booting with the "irqpoll" option) [87765.225331] CPU: 0 PID: 317 Comm: irq/23-keys Not tainted 5.15.118 #0 ... [87765.486246] handlers: [87765.488543] [<85257547>] 0x800c29a0 threaded [<5c6328a2>] 0x80ffe0b8 [gpio_button_hotplug@4cf73d00+0x1a00] [87765.498364] Disabling IRQ #23 ``` Fixes: https://github.com/openwrt/openwrt/issues/13010 Fixes: https://github.com/openwrt/openwrt/issues/12167 Fixes: https://github.com/openwrt/openwrt/issues/11191 Fixes: https://github.com/openwrt/openwrt/issues/7835 Tested-by: Hans Hasert Signed-off-by: Shiji Yang <yangshiji66@qq.com> (cherry picked from commit e32f70e7066c3110694851eced3301f50019693b)
* bcm53xx: backport 1 more late DT patch accepted for v6.7Rafał Miłecki2023-10-262-44/+63
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 732ae343ffb3ad19978b75a8105d55f5e6d1d435)
* bcm53xx: disable unused switch ports in downstream patchRafał Miłecki2023-10-261-15/+135
| | | | | | | | | This makes Linux use correct switch ports again. Fixes: e3d0c7097ee6 ("bcm53xx: backport DT changes from v6.5") Fixes: https://github.com/openwrt/openwrt/issues/13548 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a912ee74d6ca08020933dcdb9ce791e74244c25b)
* bcm53xx: backport DT changes queued for v6.7Rafał Miłecki2023-10-267-1/+686
| | | | | | | | | Among other changes this commit makes Linux use correct switch ports again. Fixes: e3d0c7097ee6 ("bcm53xx: backport DT changes from v6.5") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a67af19bc84e98588c307af9b08686bde9dd38d5)
* bcm53xx: simplify patch adding switch portsRafał Miłecki2023-10-261-128/+15
| | | | | | | | We now have all raw ports defined in bcm-ns.dtsi. Leave only lables in custom device files. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 08ce0c76d7d7daad5e9382d51960d69f4b8b8f3a)
* bcm53xx: build a single device per profileRani Hod2023-10-261-0/+1
| | | | | | | | | | | | | | | So far every build of a single bcm53xx Target Profile (it means: when NOT using CONFIG_TARGET_MULTI_PROFILE) resulted in all target devices images being built. Now it only builds the one matching selected profile. Fixes: #13572 Suggested-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Rani Hod <rani.hod@gmail.com> [rmilecki: update commit subject + body & move PROFILES line] Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 802a5f5cb4a7b42d25e82b787d7ab1323a20183f)
* bcm53xx: add support for ASUS RT-AC3100Arınç ÜNAL2023-10-261-0/+8
| | | | | | | | | | | | | | ASUS RT-AC3100 is ASUS RT-AC88U without the external switch. OpenWrt forum users effortless and ktmakwana have confirmed that there are revisions with either 4366b1 or 4366c0 wireless chips. Therefore, include firmware for 4366b1 along with 4366c0. This way, all hardware revisions of the router will be supported by having brcmfmac use the firmware file for the wireless chip it detects. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> (cherry picked from commit 2214bab3503981fe6168746acd13044a9d5e89e7)
* bcm53xx: backport DT changes for ASUS RT-AC3100 queued for v6.6Arınç ÜNAL2023-10-262-1/+432
| | | | | | | Backport the patch that adds the DT for ASUS RT-AC3100. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> (cherry picked from commit b7ee8c9f83ea0e3b861e6b71b08ed7a62066d149)
* image: Fix the CONFIG_EXTERNAL_CPIO logicLuca Barbato2023-10-241-1/+1
| | | | | | | | | Fix the qstrip call. Fixes: #13776. Signed-off-by: Luca Barbato <lu_zero@gentoo.org> (cherry picked from commit 330492a101cdb1608d1194496c1b620315ef8bd8)
* ipq40xx: switch to performance governor by defaultKoen Vandeputte2023-10-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Doing a simple ping to my device shows this: 64 bytes from 10.0.253.101: icmp_seq=1 ttl=64 time=2.00 ms 64 bytes from 10.0.253.101: icmp_seq=2 ttl=64 time=2.02 ms 64 bytes from 10.0.253.101: icmp_seq=3 ttl=64 time=1.68 ms 64 bytes from 10.0.253.101: icmp_seq=4 ttl=64 time=1.91 ms 64 bytes from 10.0.253.101: icmp_seq=5 ttl=64 time=1.92 ms 64 bytes from 10.0.253.101: icmp_seq=6 ttl=64 time=2.04 ms Some users even report higher values on older kernels: 64 bytes from 192.168.1.10: seq=0 ttl=64 time=0.612 ms 64 bytes from 192.168.1.10: seq=1 ttl=64 time=2.852 ms 64 bytes from 192.168.1.10: seq=2 ttl=64 time=2.719 ms 64 bytes from 192.168.1.10: seq=3 ttl=64 time=2.741 ms 64 bytes from 192.168.1.10: seq=4 ttl=64 time=2.808 ms The problem is that the governor is set to Ondemand, which causes the CPU to clock all the way down to 48MHz in some cases. Switching to performance governor: 64 bytes from 10.0.253.101: icmp_seq=1 ttl=64 time=0.528 ms 64 bytes from 10.0.253.101: icmp_seq=2 ttl=64 time=0.561 ms 64 bytes from 10.0.253.101: icmp_seq=3 ttl=64 time=0.633 ms 64 bytes from 10.0.253.101: icmp_seq=4 ttl=64 time=0.526 ms In theory, using the Performance governor should increase power draw, but it looks like it really does not matter for this soc. Using a calibrated precision DC power supply (cpu idle): Ondemand 24.00V * 0.134A = 3.216 Watts 48.00V * 0.096A = 4.608 Watts Performance 24.00V * 0.135A = 3.240 Watts 48.00V * 0.096A = 4.608 Watts Let's simply switch to the Performance governor by default to fix the general jittery behaviour on devices using this soc. Tested on: MikroTik wAP ac Fixes: #13649 Reviewed-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com> (cherry picked from commit b8e52852bd62236a2a84663b4592d221ebc64cb4)
* ath79: wpj563: enable 2nd USB controllerKoen Vandeputte2023-10-131-0/+8
| | | | | | | | | | | | | The compex WPJ563 actually has both usb controllers wired: usb0 --> pci-e slot usb1 --> pin header As the board exposes it for generic use, enable this controller too. fixes: #13650 Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com> (cherry picked from commit 9188c77cbee55a933d0fa75c74e175fbc52c556d)
* toolchain: Update glibc 2.34 to recent HEADHauke Mehrtens2023-10-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the following changes: 42eb735a5d Use LFS and 64 bit time for installed programs (BZ #15333) d910ba48f4 nis: Build libnsl with 64 bit time_t 01c0a0405c nscd: Use 64 bit time_t on libc nscd routines (BZ# 29402) e14a91e59d time: Use 64 bit time on tzfile d0e2ac0c59 elf/tst-tlsopt-powerpc fails when compiled with -mcpu=power10 (BZ# 29776) 71d4fe94a1 time: Set daylight to 1 for matching DST/offset change (bug 29951) bbe4bbb6e8 elf: Drop elf/tls-macros.h in favor of __thread and tls_model attributes [BZ #28152] [BZ #28205] d36f457870 intl: Avoid -Wuse-after-free [BZ #26779] 92d5c52aaa resolv: Avoid GCC 12 false positive warning [BZ #28439]. 26c7c6bac9 Fix stdlib/tst-setcontext.c for GCC 12 -Warray-compare 6ff61a5145 Fix stdio-common tests for GCC 12 -Waddress 803c959745 Fix build of nptl/tst-thread_local1.cc with GCC 12 88b3228d9f Avoid -Wuse-after-free in tests [BZ #26779]. dd0c72fb46 Regenerate ulps on x86_64 with GCC 12 80b24b8654 math: Properly cast X_TLOSS to float [BZ #28713] c5c666f349 s_sincosf.h: Change pio4 type to float [BZ #28713] 6484ae5b8c malloc: Fix -Wuse-after-free warning in tst-mallocalign1 [BZ #26779] c5c792092b cdefs: Limit definition of fortification macros 0b962177ee Use 64-bit time_t interfaces in strftime and strptime (bug 30053) 48059f2b21 Fix NEWS bug entry for 0b962177ee3b45cf775176eb454fcf6aa1b0f6e3 11ad405fd4 elf: Fix 64 time_t support for installed statically binaries 2d7550e6cf elf: Smoke-test ldconfig -p against system /etc/ld.so.cache 16c6a89c17 stdlib: Undo post review change to 16adc58e73f3 [BZ #27749] 89c017de2f x86: Check minimum/maximum of non_temporal_threshold [BZ #29953] 6a0d56b009 gshadow: Matching sgetsgent, sgetsgent_r ERANGE handling (bug 30151) 71eb9cc1ff x86_64: Fix asm constraints in feraiseexcept (bug 30305) 567f7413fb posix: Fix system blocks SIGCHLD erroneously [BZ #30163] 8e1a8e04b1 gmon: Fix allocated buffer overflow (bug 29444) 4dd89b2a8f gmon: improve mcount overflow handling [BZ# 27576] f1b15d2005 gmon: fix memory corruption issues [BZ# 30101] 0ea8174d62 gmon: Revert addition of tunables to preserve GLIBC_PRIVATE ABI 1cd6626a89 __check_pf: Add a cancellation cleanup handler [BZ #20975] cad3adf4dd Document BZ #20975 fix 23ee92deea debug: Mark libSegFault.so as NODELETE c8c0aac68f x86: Increase `non_temporal_threshold` to roughly `sizeof_L3 / 4` 521afc9637 x86: Fix slight bug in `shared_per_thread` cache size calculation. a07ab67a88 x86: Use `3/4*sizeof(per-thread-L3)` as low bound for NT threshold. 7a6b1f06e7 x86: Fix incorrect scope of setting `shared_per_thread` [BZ# 30745] 228cdb00a0 Simplify allocations and fix merge and continue actions [BZ #28931] 51948fdf0f nss: Sort tests and tests-container and put one test per line 01671608a3 gethosts: Remove unused argument _type b195fd86c6 gaih_inet: Simplify canon name resolution f7efb43738 getaddrinfo: Fix leak with AI_ALL [BZ #28852] e05e5889b8 gaih_inet: Simplify service resolution 922f2614d6 gaih_inet: make numeric lookup a separate routine 3b5a3e5009 gaih_inet: Split simple gethostbyname into its own function 5914a1d55b gaih_inet: Split nscd lookup code into its own function. ec71cb9611 gaih_inet: separate nss lookup loop into its own function 4d59769087 gaih_inet: make gethosts into a function 6e3fed9d20 gaih_inet: split loopback lookup into its own function 92478a808f gaih_inet: Split result generation into its own function cc4544ef80 gethosts: Return EAI_MEMORY on allocation failure e09ee267c0 getaddrinfo: Fix use after free in getcanonname (CVE-2023-4806) 8006457ab7 Fix leak in getaddrinfo introduced by the fix for CVE-2023-4806 [BZ #30843] c3b99f8328 Document CVE-2023-4806 and CVE-2023-5156 in NEWS dcc367f148 tunables: Terminate if end of input is reached (CVE-2023-4911) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* openssl: update to version 1.1.1wJosef Schlehofer2023-09-291-2/+2
| | | | | | | | | Fixes CVE: CVE-2023-4807 [1] [1]  https://mta.openssl.org/pipermail/openssl-announce/2023-September/000273.html Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* treewide: Add extra CPE identifierHauke Mehrtens2023-09-274-0/+4
| | | | | | | This adds some Common Platform Enumerations (CPE) identifiers which I found. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: musl: add PKG_CPE_IDArne Zachlod2023-09-271-0/+1
| | | | | | | Vulnerabilities of musl libc are tracked as cpe:/a:musl-libc:musl Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
* toolchain: assign PKG_CPE_IDAlexander Couzens2023-09-276-0/+6
| | | | | | | | | The PKG_CPE_ID links to NIST CPE version 2.2. Assign PKG_CPE_ID to all remaining package which have a CPE ID. Not every package has a CPE id. Related: https://github.com/openwrt/packages/issues/8534 Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* tools: assign PKG_CPE_IDAlexander Couzens2023-09-276-0/+6
| | | | | | | | | The PKG_CPE_ID links to NIST CPE version 2.2. Assign PKG_CPE_ID to all remaining tools which have a CPE ID. Not every tool has CPE id. Related: https://github.com/openwrt/packages/issues/8534 Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* packages: assign PKG_CPE_ID for all missing packagesAlexander Couzens2023-09-2713-0/+13
| | | | | | | | | The PKG_CPE_ID links to NIST CPE version 2.2. Assign PKG_CPE_ID to all remaining package which have a CPE ID. Not every package has CPE id. Related: https://github.com/openwrt/packages/issues/8534 Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* kernel: bump 5.10 to 5.10.197Hauke Mehrtens2023-09-246-9/+9
| | | | | | All patches automatically rebased. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.196Hauke Mehrtens2023-09-2463-437/+186
| | | | | | | | | | | | | | Removed because already in upstream: target/linux/bcm53xx/patches-5.10/030-v5.11-0002-ARM-dts-BCM5301X-Harmonize-EHCI-OHCI-DT-nodes-name.patch target/linux/bcm53xx/patches-5.10/033-v5.16-0019-ARM-dts-BCM53573-Describe-on-SoC-BCM53125-rev-4-swit.patch target/linux/bcm53xx/patches-5.10/040-v6.6-0005-ARM-dts-BCM53573-Drop-nonexistent-usb-cells.patch target/linux/bcm53xx/patches-5.10/040-v6.6-0006-ARM-dts-BCM53573-Add-cells-sizes-to-PCIe-node.patch target/linux/bcm53xx/patches-5.10/040-v6.6-0007-ARM-dts-BCM53573-Use-updated-spi-gpio-binding-proper.patch target/linux/bcm53xx/patches-5.10/040-v6.6-0008-ARM-dts-BCM5301X-Extend-RAM-to-full-256MB-for-Linksy.patch All other patches automatically rebased. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: fix packetloss on some WLR-7100Matthijs Kooijman2023-09-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some WLR-7100 routers, significant packet loss was observed. This is fixed by configuring a delay on the GMAC0 RXD and RXDV lines. The values used in this commit are copied from the values used by the stock firmare (based on register dumping). Out of four test routers, the problem was consistently observed on two. It is unclear what the relevant difference is exactly (the two working routers were v1 001 with AR1022 and v1 002 with AR9342, the two broken routers were both v1 002 with AR1022). All PCB routing also seems identical, so maybe there is some stray capacitance on some of these that adds just enough delay or so... With this change, the packet loss disappears on the broken routers, without introducing new packet loss on the previously working routers. Note that the PHY *also* has delays enabled (through `qca,ar8327-initvals`) on both RX and TX lines, but apparently that is not enough, or it is not effective (registers have been verified to be written). For detailed discussion of this issue and debug history, see https://forum.openwrt.org/t/sitecom-wlr-7100-development-progress/79641 Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> (cherry picked from commit d2ce3a61aa1cbc53988eb640cbab48e20fbfb1aa)
* x86: geode: fix hwrng register accessesJonas Gorski2023-09-141-0/+47
| | | | | | | | | | | | | | | | | | | | When the membase and pci_dev pointer were moved to a new struct in priv, the actual membase users were left untouched, and they started reading out arbitrary memory behind the struct instead of registers. This unfortunately turned the RNG into a constant number generator, depending on the content of what was at that offset. To fix this, update geode_rng_data_{read,present}() to also get the membase via amd_geode_priv, and properly read from the right addresses again. Closes #13417. Reported-by: Timur I. Davletshin <timur.davletshin@gmail.com> Tested-by: Timur I. Davletshin <timur.davletshin@gmail.com> Suggested-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> (cherry picked from commit 09d13cd8d87cc50fde67bbe81c6cca4b799b2724)
* mt76: update to the latest version from the 22.03 branchFelix Fietkau2023-09-121-3/+3
| | | | | | bdf8ea717007 mt76: mt7921: don't assume adequate headroom for SDIO headers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 5.10 to 5.10.194Hauke Mehrtens2023-09-036-10/+10
| | | | | | All patches automatically rebased. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.192Hauke Mehrtens2023-08-298-44/+12
| | | | | | | | | Removed because already in upstream: rockchip/patches-5.10/104-rockchip-use-USB-host-by-default-on-rk3399-rock-pi-4.patch All other patches automatically rebased. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 09:16:01 +0000