aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* x86: remove obsolete Kernel 5.4Paul Spooren2021-10-0210-2009/+0
| | | | | | | With the upgrade to Kernel 5.10 per default the old version is no longer required to be in tree. Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: bump 5.4 to 5.4.150Hauke Mehrtens2021-10-0256-154/+120
| | | | | | | | | | | | | | | | Manually rebased: generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch Removed upstreamed: layerscape/patches-5.4/819-uart-0004-MLK-18137-fsl_lpuart-Fix-loopback-mode.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: add Globalscale MOCHAbinRobert Marko2021-10-026-1/+471
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Globalscale MOCHAbin is a Armada 7040 based development board. Specifications: * Armada 7040 Quad core ARMv8 Cortex A-72 @ 1.4GHz * 2 / 4 / 8 GB of DDR4 DRAM * 16 GB eMMC * 4MB SPI-NOR (Bootloader) * 1x M.2-2280 B-key socket (for SSD expansion, SATA3 only) * 1x M.2-2250 B-key socket (for modems, USB2.0 and I2C only) * 1x Mini-PCIe 3.0 (x1, USB2.0 and I2C) * 1x SATA 7+15 socket (SATA3) * 1x 16-pin (2×8) MikroBus Connector * 1x SIM card slot (Connected to the mini-PCIe and both M.2 slots) * 2x USB3.0 Type-A ports via SMSC USB5434B hub * Cortex 2x5 JTAG * microUSB port for UART (PL2303GL/PL2303SA onboard) * 1x 10G SFP+ * 1x 1G SFP (Connected to 88E1512 PHY) * 1x 1G RJ45 with PoE PD (Connected to 88E1512 PHY) * 4x 1G RJ45 ports via Topaz 88E6141 switch * RTC with battery holder (SoC provided, requires CR2032 battery) * 1x 12V DC IN * 1x Power switch * 1x 12V fan header (3-pin, power only) * 1x mini-PCIe LED header (2x0.1" pins) * 1x M.2-2280 LED header (2x0.1" pins) * 6x Bootstrap jumpers * 1x Power LED (Green) * 3x Tri-color RGB LEDs (Controllable) * 1x Microchip ATECC608B secure element Note that 1G SFP and 1G WAN cannot be used at the same time as they are in parallel connected to the same PHY. Installation: Copy dtb from build_dir to bin/ and run tftpserver there: $ cp ./build_dir/target-aarch64_cortex-a72_musl/linux-mvebu_cortexa72/image-armada-7040-mochabin.dtb bin/targets/mvebu/cortexa72/ $ in.tftpd -L -s bin/targets/mvebu/cortexa72/ Connect to the device UART via microUSB port and power on the device. Power on the device and hit any key to stop the autoboot. Set serverip (host IP) and ipaddr (any free IP address on the same subnet), e.g: $ setenv serverip 192.168.1.10 # Host $ setenv ipaddr 192.168.1.15 # Device Set the ethernet device (Example for the 1G WAN): $ setenv ethact mvpp2-2 Ping server to confirm network is working: $ ping $serverip Using mvpp2-2 device host 192.168.1.15 is alive Tftpboot the firmware: $ tftpboot $kernel_addr_r openwrt-mvebu-cortexa72-globalscale_mochabin-initramfs-kernel.bin $ tftpboot $fdt_addr_r image-armada-7040-mochabin.dtb Boot the image: $ booti $kernel_addr_r - $fdt_addr_r Once the initramfs is booted, transfer openwrt-mvebu-cortexa72-globalscale_mochabin-squashfs-sdcard.img.gz to /tmp dir on the device. Gunzip and dd the image: $ gunzip /tmp/openwrt-mvebu-cortexa72-globalscale_mochabin-squashfs-sdcard.img.gz $ dd if=/tmp/openwrt-mvebu-cortexa72-globalscale_mochabin-squashfs-sdcard.img of=/dev/mmcblk0 && sync Reboot the device. Hit any key to stop the autoboot. Reset U-boot env and set the bootcmd: $ env default -a $ setenv bootcmd 'load mmc 0 ${loadaddr} boot.scr && source ${loadaddr}' Optionally I would advise to edit the console env variable to remove earlycon as that causes the kernel to never use the driver for the serial console. Earlycon should be used only for debugging before the kernel can configure the console and will otherwise cause various issues with the console. $ setenv console 'console=ttyS0,115200' Save and reset $ saveenv $ reset OpenWrt should boot from eMMC now. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* lantiq: kernel: xway-nand: Move ECC engine setting to new DT bindingDaniel Kestrel2021-10-0213-7/+50
| | | | | | | | | | | | | | | | When trying to add support for another device with Micron NAND chips, it was discovered that the default setting in the kernel source does not work with Micron Chips, since the device trees setting is overwritten and hard coded by the kernel xway_nand driver. This was the original reason for this PR. A kernel patch sets the default ECC mode to soft without overwriting the device tree settings and the device tree for devices using it are updated with new parameters because the old ones are deprecated by torvalds/linux@533af69. A patch for kernel 5.4 is provided to support the new settings because kernel 5.4 does not support it. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lantiq: kernel: xway-nand: Fix setting on-die ECC engines in dtsHauke Mehrtens2021-10-022-2/+70
| | | | | | | This backports a fix proposed for upstream kernel to fix overwriting the NAND ECC engine in device tree. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-lantiq: fix sha1.h header clash when system libmd installedAlan Swanson2021-10-021-0/+172
| | | | | | | | Backport of u-boot commit "includes: move openssl headers to include/u-boot" https://github.com/u-boot/u-boot/commit/2b9912e6a7df7b1f60beb7942bd0e6fa5f9d0167 Fixes: FS#3955 Signed-off-by: Alan Swanson <reiver@improbability.net>
* mediatek: mt7623: bpi-r2: add LED aliasesDaniel Golle2021-10-011-0/+29
| | | | | | Add aliases for LEDs in device tree of the BPi-R2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: remove files and patches for Linux 5.4Daniel Golle2021-10-01183-111722/+0
| | | | | | | All subtargets only provide files and patches for Linux 5.10 by now so there is little use for the old Linux 5.4 stuff. Remove it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* armvirt: switch to Kernel 5.10Paul Spooren2021-10-011-2/+1
| | | | | | | | | | | | Armvirt is a development and testing platform and should therefore use the latest OpenWrt Kernel by default. Tested via qemu. Acked-by: Rosen Penev <rosenp@gmail.com> Acked-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* malta: switch to Kernel 5.10Paul Spooren2021-10-011-2/+1
| | | | | | | | | | Malta is a development and testing platform and should therefore use the latest OpenWrt Kernel by default. Acked-by: Rosen Penev <rosenp@gmail.com> Acked-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* prereq-build: revert "fix `which` detection on Fedora"Paul Spooren2021-09-301-1/+1
| | | | | | | | This reverts commit fca5ad55d292f8e481406123d0e95b3c85d39733. Causes problems on MacOS host systems. Signed-off-by: Paul Spooren <mail@aparcar.org>
* prereq-build: fix `which` detection on FedoraJani Partanen2021-09-301-1/+1
| | | | | | | | | Fix Fedora 34/35 issue where 'which' detection of 'which' wasn't working because Fedora use alias and proc Signed-off-by: Jani Partanen <rtfm@iki.fi> [fix commit subject and message] Signed-off-by: Paul Spooren <mail@aparcar.org>
* mediatek: add FEATURES and order them alphabeticallyDaniel Golle2021-09-302-2/+2
| | | | | | | | Add common features 'gpio', 'nand', 'pci', 'pcie', 'squashfs' and 'usb' for all mediatek targets, add 'display' and 'usbgadget' for MT7623. Sort features alphabetically while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix and make use of LEDs on BPi-R2Daniel Golle2021-09-302-5/+36
| | | | | | | Fix BPi-R2 GPIO LEDs to indicate boot into production or recovery firmware in DTS and define them in default environment. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: provide power on mPCIe in SATA modeDaniel Golle2021-09-301-17/+2
| | | | | | | | | User reported that R64 doesn't provide power to the mPCIe slot in case the PCIe port is disabled as it is when selecting the SATA configuration. As users may still want to use USB-connected mPCIe modules in CN8 slot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.70Rui Salvaterra2021-09-308-54/+13
| | | | | | | Deleted (upstreamed): bcm53xx/patches-5.10/181-Revert-USB-bcma-Add-a-check-for-devm_gpiod_get.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.69Rui Salvaterra2021-09-305-26/+3
| | | | | | Patches automatically refreshed. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.68Rui Salvaterra2021-09-3022-536/+27
| | | | | | | | | | | | | Deleted (upstreamed): generic/backport-5.10/610-v5.13-02-netfilter-Fix-fall-through-warnings-for-Clang.patch generic/backport-5.10/792-v5.15-0001-net-dsa-b53-Fix-calculating-number-of-switch-ports.patch generic/backport-5.10/792-v5.15-0002-net-dsa-b53-Set-correct-number-of-ports-in-the-DSA-s.patch generic/backport-5.10/792-v5.15-0003-net-dsa-b53-Fix-IMP-port-setup-on-BCM5301x.patch generic/backport-5.10/840-0001-PCI-of-Don-t-fail-devm_pci_alloc_host_bridge-on-miss.patch generic/backport-5.10/840-0002-PCI-iproc-Fix-BCMA-probe-resource-handling.patch generic/pending-5.10/498-mtd-mtdconcat-select-readwrite-function.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.67Rui Salvaterra2021-09-3018-71/+29
| | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0312-vc4_hdmi-Set-HD_CTL_WHOLSMP-and-HD_CTL_CHALIGN_SET.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.66Rui Salvaterra2021-09-301-2/+2
| | | | | | No patches refreshed. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.65Rui Salvaterra2021-09-3021-66/+74
| | | | | | | | | Manually refreshed: generic/pending-5.10/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch bcm27xx/patches-5.10/950-0053-firmware-bcm2835-Support-ARCH_BCM270x.patch bcm27xx/patches-5.10/950-0087-firmware-raspberrypi-Add-backward-compatible-get_thr.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* netifd: update to the latest versionFelix Fietkau2021-09-301-3/+3
| | | | | | | | | | | 186f6eaeba70 wireless: display log messages for setup/teardown/retry fac471c4934a wireless: process and close script file descriptor when rerunning setup 62e2bb56f48e main: poll process log stream even if processes are killed 0e311d3f2d1a wireless: reset number of retries on config change e467e0ff44c0 wireless: reset retry counter when setup succeeds 448ffc154fe7 wireless: fix index for stations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: allow retry of wifi setup if an iw interface add command failsFelix Fietkau2021-09-301-1/+1
| | | | | | In some cases, spurious failures might be cleared by teardown and retry Signed-off-by: Felix Fietkau <nbd@nbd.name>
* cryptodev-linux: update to 1.12Rosen Penev2021-09-292-35/+3
| | | | | | | | Remove upstream backport. Use AUTORELEASE for simplicity. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: add missing symbol to kmod-kvmStijn Tintel2021-09-291-0/+1
| | | | | | | | Even though TRACEPOINTS is not enabled in my kernel config, my build fails due to KVM_MMU_AUDIT being missing. Add this symbol to kmod-kvm to fix this. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: order kmod-kvm symbols alphabeticallyStijn Tintel2021-09-291-2/+2
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* prereq-build: recognize Python 3.10Marcin Juszkiewicz2021-09-281-0/+2
| | | | | | | | Fedora 35 contains Python 3.10 as default version. Make use of it. Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> [fix commit subject] Signed-off-by: Paul Spooren <mail@aparcar.org>
* netifd: update to the latest versionFelix Fietkau2021-09-281-3/+3
| | | | | | 4d0c2ad3fd26 wireless: fix applying wireless devices attributes on hotplug events Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2021-09-271-3/+3
| | | | | | 5a4ac30c7a15 netifd: rework/fix device free handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add support for Netgear R7450Dale Hui2021-09-264-1/+30
| | | | | | | | | | | | | | | | | | | | | | | | | Netgear R7450 is a clone of Netgear R6700v2 Specifications ============== SoC: MediaTek MT7621AT RAM: 256M DDR3 FLASH: 128M NAND WiFi: MediaTek MT7615N an+ac MediaTek MT7615N bgn ETH: MediaTek MT7621AT BTN: 1x Connect (WPS), 1x WLAN, 1x Reset LED: Power (white/amber), WAN(white/amber), 2.4G(white), 5G(white), USB(white) , GuestWifi(white) 4x LAN(white/amber), Wifi Button(white), WPS Button(white) Flash Instructions ================== Login to netgear webinterface and flash factory.img Signed-off-by: Dale Hui <strokes-races0b@icloud.com> [fix model/compatible in DTS] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for Netgear R6900v2Dale Hui2021-09-264-0/+30
| | | | | | | | | | | | | | | | | | | | | | | Netgear R6900v2 is a clone of Netgear R6700v2 Specifications ============== SoC: MediaTek MT7621AT RAM: 256M DDR3 FLASH: 128M NAND WiFi: MediaTek MT7615N an+ac MediaTek MT7615N bgn ETH: MediaTek MT7621AT BTN: 1x Connect (WPS), 1x WLAN, 1x Reset LED: Power (white/amber), WAN(white/amber), 2.4G(white), 5G(white), USB(white) , GuestWifi(white) 4x LAN(white/amber), Wifi Button(white), WPS Button(white) Flash Instructions ================== Login to netgear webinterface and flash factory.img Signed-off-by: Dale Hui <strokes-races0b@icloud.com>
* ramips: add Nighthawk AC2100 as name for Netgear R6700v2Dale Hui2021-09-261-0/+3
| | | | | | | | Netgear Nighthawk AC2100 is another name of the Netgear R6700v2. Signed-off-by: Dale Hui <strokes-races0b@icloud.com> [adjust commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: make Netgear R7200 a separate device from R6700v2Dale Hui2021-09-264-4/+30
| | | | | | | | | With the various variants of Netgear R**** devices, make it more obvious which image should be used for the R7200. Signed-off-by: Dale Hui <strokes-races0b@icloud.com> [provide proper commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* realtek: add Kernel 5.10 as testing versionINAGAKI Hiroshi2021-09-261-0/+1
| | | | | | | This patch adds "KERNEL_TESTING_PATCHVER:=5.10" to the Makefile in realtek target to allow using Kernel 5.10 for testing. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: enable uart1 on the devices with PoE support in 5.10INAGAKI Hiroshi2021-09-267-0/+28
| | | | | | | | | | | | | | | | On the devices with PoE support, the secondary UART (uart1) on the SoC is used to communicate between the SoC and controller. Enable the secondary UART on the following devices: - D-Link DGS-1210-10P - Netgear GS110TPP v1 - Netgear GS310TP v1 - ZyXEL GS1900-8HP v1/v2 - ZyXEL GS1900-10HP - ZyXEL GS1900-24HP v2 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: use physical addresses in soc dtsi in 5.10INAGAKI Hiroshi2021-09-262-12/+12
| | | | | | Use physical addresses instead of virtual address in dts files. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: use gpio-keys instead of "-polled" if SoC GPIO is used in 5.10INAGAKI Hiroshi2021-09-262-4/+2
| | | | | | | | The new backported GPIO driver supports interrupt, so use gpio-keys instead of gpio-keys-polled for keys connected to the internal GPIO controller. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: update GPIO bindings in the dts files in dts-5.10INAGAKI Hiroshi2021-09-266-33/+29
| | | | | | | | | | | | | | | | | | | this patch includes the following changes: - adjust mapping for the new driver - GPIO 24 -> GPIO 0 - GPIO 47 -> GPIO 0 (+ disabling system LED) - disable pins in the invalid range (out of the range 0-31 of the new driver) - are these pins on the external RTL8231 (&gpio1)? - GPIO 67 (-> GPIO 3 on &gpio1?) - GPIO 94 (-> GPIO 30 on &gpio1?) - drop "indirect-access-bus-id" property from gpio0 node in device dts files Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: fix kernel panic in DSA driver for 5.10INAGAKI Hiroshi2021-09-261-2/+8
| | | | | | | | | | dsa_to_port function in 5.10 returns dsa_port from the port list in dsa_switch_tree, but the tree is built when the switch is registered by dsa_register_switch and it's null in rtl83xx_mdio_probe. So, we need to use dsa_to_port after the registration of the switch. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: add pinmux node of LED_GLB_CTRL to rtl838x.dtsi in dts-5.10INAGAKI Hiroshi2021-09-261-0/+16
| | | | | | | This patch adds a pinctrl-single pinmux node to allow disabling system LED and enabling GPIO 0 (old driver: GPIO 24). Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: fix compile errors in dsa driver for 5.10INAGAKI Hiroshi2021-09-262-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | this patch fixes the following errors when compiling: - dsa_switch_alloc is removed[1] - a parameter "enum dsa_tag_protocol mprot" is added to dsa_tag_protocol in dsa_switch_ops (include/net/dsa.h) - several paramters are added to "phylink_mac_link_up" in dsa_switch_ops (include/net/dsa.h) added: - int speed - int duplex - bool tx_pause - bool rx_pause - a parameter "struct switchdev_trans *trans" is added to port_vlan_filtering in dsa_switch_ops (include/net/dsa.h) [1]: https://lore.kernel.org/lkml/20191020031941.3805884-17-vivien.didelot@gmail.com/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: fix compile errors in rtl838x_eth.c for 5.10INAGAKI Hiroshi2021-09-261-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | this patch fixes the following errors when compiling: - "unsigned int txqueue" is added as an additional parameter of ndo_tx_timeout in net_device_ops (include/linux/netdevice.h) - "mac_link_state" in phylink_mac_ops (include/linux/phylink.h) is renamed to "mac_pcs_get_state" and changed the return value to void from int - several parameters are added to "mac_link_up" in phylink_mac_ops (include/linux/phylink.h) and the order of the parameters is changed added: - int speed - int duplex - bool tx_pause - bool rx_pause - a parameter "phy_interface_t *interface" is added to of_get_phy_mode (drivers/of/of_net.c) and returns the state instead of phy mode Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: add "soc" node to soc dtsi in dts-5.10INAGAKI Hiroshi2021-09-262-129/+147
| | | | | | Add a "soc" node as a simple-bus to rtl838x.dtsi and rtl930x.dtsi. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: update soc dtsi in 5.10 for backported driversINAGAKI Hiroshi2021-09-262-6/+41
| | | | | | | | | | | | | | | this patch updates SoC dtsi (rtl838x.dtsi, rtl930x.dtsi) for the following backported drivers: - gpio-realtek-otto (5.13) - spi-realtek-rtl (5.12) - irq-realtek-rtl (5.12) And, disable SoC GPIO node (gpio0) in rtl930x.dtsi in dts-5.10. Currently, the upstreamed driver doesn't support the GPIO controller on RTL930x SoC. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: cleanup and update soc dtsi in 5.10INAGAKI Hiroshi2021-09-262-28/+11
| | | | | | | | | | the following changes are included in this patch: - node is enabled by default, drop 'status = "okay"' - adjust order of "compatible" lines and "reg" lines - add a new blank line before fixed-link node in rtl830x.dtsi Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: copy dts directory for Kernel 5.10INAGAKI Hiroshi2021-09-2643-1/+1708
| | | | | | | | | | | | | This patch adds "dts-5.10" directory to use backported drivers. There are several specification changes in the new drivers, so there are some compatibility issues in using dts/dtsi files for 5.4. The old DTS files are moved to "dts-5.4", so their corresponding kernel version is obvious as well. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [change "dts" to "dts-5.4", adjust Makefile] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* realtek: refresh and update config-5.10INAGAKI Hiroshi2021-09-261-16/+15
| | | | | | | | | | This patch adjusts config-5.10 by running kernel_menuconfig. Note: - disable psb6970 phy driver (unused in realtek target?) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: refresh patches for Kernel 5.10INAGAKI Hiroshi2021-09-2610-51/+44
| | | | | | | This patch refresh all patches in patches-5.10/ to adjust for Kernel 5.10. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: remove unnecessary line from rtl838x/Platform in 5.10INAGAKI Hiroshi2021-09-261-1/+0
| | | | | | | | | The following line is already defined in arch/mips/Kbuild.platforms by 300-mips-add-rtl838x-platform.patch. platform-$(CONFIG_RTL838X) += rtl838x/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: drop fixup_bigphys_addr from ioremap.h in 5.10INAGAKI Hiroshi2021-09-261-5/+0
| | | | | | | A macro with the same name is provided in asm/pgtable.h in Kernel 5.10, use it and drop from ioremap.h. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 00:50:23 +0000