aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: tl-wpa8630: Fix kernel lenghtHenryk Heisig2016-11-081-1/+1
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ar71xx: wpa8630: change board name to tl-wpa8630Henryk Heisig2016-11-0813-200/+202
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: Add support for Wavlink WL-WN575A3Roger Pueyo Centelles2016-11-086-0/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Wavlink WL-WN575A3, a dual-band wall-plug wireless router with the following specifications: - CPU: MediaTek MT7628AN 580MHz - Flash: 8MB - RAM: 64MB - Ethernet: 2x 10/100 Mbps (switched) - 2.4 GHz: 802.11b/g/n SoC, MIMO 2x2, 20 dBm - 5 GHz: 802.11a/n/ac MT7612E, MIMO 2x2, 20 dBm - Antennas: 4x external (2 per radio), non-detachable - LEDs: 4 programmable + LAN, WAN, POWER - Buttons: reset, WPS Flashing instructions: Factory U-boot launches a TFTP client if WPS button is pressed during power-on. Rename the sysupgrade file and configure a TFTP as follows: - Client (WL-WN575A3) IP: 192.168.10.101 - Server IP: 192.168.10.100 - Filename: firmware.bin Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* dnsmasq: Support add-mac optionHans Dedecker2016-11-082-1/+7
| | | | | | | | | | | | | | | | Adds the mac address of the DNS requestor to DNS queries which are forwarded upstream and can be used to do filtering by the upstream servers. This only works if the requestor is on the same subnet as the dnsmasq server The addmac parameter can hold the following values: 0 : mac address is not added 1 : mac address is added in binary format base64 : mac address is added base64 encoded text: : mac address is added in human readable format as hex and colons Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: fix Newifi D1 profileBangLang Huang2016-11-081-1/+1
| | | | | | the images were generated for the wrong flash size. Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
* mdadm: move to Disc submenuAlberto Bursi2016-11-081-0/+1
| | | | | | As in Disc there is also lvm2 and other hard drive tools in the Openwrt package feeds. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* yamonenv: move to Boot Loaders submenuAlberto Bursi2016-11-081-0/+1
| | | | | | Boot Loaders submenu is the place where all other boot loaders are. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* comgt: move to WWAN submenu, fixed linkAlberto Bursi2016-11-081-3/+4
| | | | | | | | moving comgt and its modules to WWAN submenu to join uqmi as both are tools for WWAN modems. I replaced the link with comgt's ubuntu manpage because the old link isn't working anymore. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uqmi: moved to WWAN submenuAlberto Bursi2016-11-081-0/+1
| | | | | | Moving uqmi to WWAN submenu Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* build: remove stale .ipk files if package dir changesFelix Fietkau2016-11-083-6/+6
| | | | | | | | | If a package nonshared status is changed, a stale .ipk file might still be present in the old package directory. Remove the .ipk file from all package directories when building a new one (or explicitly running clean) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ca-certificates: update to version 20161102Christian Schoenebeck2016-11-081-2/+2
| | | | Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* kernel: add kernel module package for the DS1374 RTCFlorian Larysch2016-11-081-0/+18
| | | | | | | Package the driver for the DS1374 chip present on the T4240RDB. Signed-off-by: Florian Larysch <fl@n621.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix missing symbol]
* kernel: package module for the W83793 hwmon chipsFlorian Larysch2016-11-081-0/+15
| | | | | | Package the driver for the W83793 hwmon chip present on the T4240RDB. Signed-off-by: Florian Larysch <fl@n621.de>
* devel/strace: fix build on mpc85xx targetAlexandru Ardelean2016-11-081-0/+14
| | | | | | | | | | | | | | | builbot faillog: https://downloads.lede-project.org/snapshots/faillogs/powerpc_8540/base/strace/compile.txt Seems that for PPC, the <linux/ptrace.h> header [from uapi] collides with musl's <sys/user.h>, for the pt_regs struct. Seems I tried to upstream this patch a while back: https://lists.openwrt.org/pipermail/openwrt-devel/2016-April/041093.html It seems to work on current LEDE trunk too. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* gcom: Fix 'mode' option for ncmCezary Jackiewicz2016-11-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For Huawei devices like E3372 proper command for set lte mode is: AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,, Eval is required for proper quotation. Without this fix: Fri Nov 4 19:07:49 2016 daemon.notice netifd: Interface 'wan' is setting up now Fri Nov 4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> AT Fri Nov 4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> ATZ Fri Nov 4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATQ0 Fri Nov 4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATV1 Fri Nov 4 19:07:54 2016 daemon.notice netifd: wan (2060): sending -> ATE1 Fri Nov 4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> ATS0=0 Fri Nov 4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> AT+CGDCONT=1,"IP","internet" Fri Nov 4 19:07:57 2016 daemon.notice netifd: wan (2060): sending -> AT^SYSCFGEX=\"03\",3fffffff,2,4,7fffffffffffffff,, Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2060): Error running AT-command Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2060): Failed to set operating mode Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2092): Stopping network ... With this fix: Fri Nov 4 19:10:59 2016 daemon.notice netifd: Interface 'wan' is setting up now Fri Nov 4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> AT Fri Nov 4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> ATZ Fri Nov 4 19:11:02 2016 daemon.notice netifd: wan (2539): sending -> ATQ0 Fri Nov 4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATV1 Fri Nov 4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATE1 Fri Nov 4 19:11:04 2016 daemon.notice netifd: wan (2539): sending -> ATS0=0 Fri Nov 4 19:11:05 2016 daemon.notice netifd: wan (2539): sending -> AT+CGDCONT=1,"IP","internet" Fri Nov 4 19:11:06 2016 daemon.notice netifd: wan (2539): sending -> AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,, Fri Nov 4 19:11:07 2016 daemon.notice netifd: wan (2539): sending -> AT^NDISDUP=1,1,"internet" Fri Nov 4 19:11:08 2016 daemon.notice netifd: wan (2539): Connected, starting DHCP on wwan0 Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan' is now up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Network device 'wwan0' link is up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Network alias 'wwan0' link is up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is enabled Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' has link connectivity Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is setting up now ... Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* bgmac: backport small DMA fixRafał Miłecki2016-11-074-4/+88
| | | | | | | | It's supposed to significantly improve performance but doesn't seem to affect Northstar unfortunately. It seems only some other platforms were limited because of this DMA setup mistake. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix bgmac regression causing BCM47186B0 SoC hangsRafał Miłecki2016-11-072-0/+65
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix kmod-sound-core build errorMathias Kresin2016-11-051-1/+1
| | | | | | Fix build error introduced with 2ab6aac. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: add SND_PCM_TIMER to kmod-sound-coreDmitry Sutyagin2016-11-051-0/+1
| | | | | | | | | | | | | | | | | | | FS#256 Fix audio not working due to unset SND_PCM_TIMER. CONFIG_SND_PCM_TIMER is required for ALSA to work (at least for some audio devices), otherwise applications using sound may fail. Can be reproduced by installing "alsa-utils-tests" and running "speaker-test": ... ALSA lib pcm_direct.c:1159:(snd1_pcm_direct_initialize_poll_fd) unable to open timer 'hw:CLASS=3,SCLASS=0,CARD=0,DEV=0,SUBDEV=0' ALSA lib pcm_dmix.c:1106:(snd_pcm_dmix_open) unable to initialize poll_fd Playback open error: -19,No such device The kernel size does not increase, only the size of the kernel module increases. Signed-off-by: Dmitry Sutyagin <f3flight@gmail.com>
* arm64: switch boot-wrapper to working repositoryJo-Philipp Wich2016-11-051-1/+1
| | | | | | | | The original repo in this Makefile disappeared from the internet so use another copy of this repository on kernel.org. Also switch from git:// to https:// while being at it. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* cns3xxx: fix UART resource overlapKoen Vandeputte2016-11-051-2/+2
| | | | | | | | | | | | Port 1 registers the same IO resources as port 2 in the kernel resource tree, which is wrong. Fix this by using it's own resources as indicated in the overview (cns3xxx.h). Compiled & Tested on several GW2388-4 laguna boards which utilizes all 3 ports. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* Revert "mt76: update to the latest version, adds a tx queue configuration fix"Felix Fietkau2016-11-051-2/+2
| | | | | | | This reverts commit 32867540ea18db2c8b025723768093cd5c12f22b. A report indicates that this causes a tx/rx throughput regression Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sdk: depend on linux/installJo-Philipp Wich2016-11-041-0/+1
| | | | | | | | | | Since commit 484cb91 "sdk: bundle required firmware files" there is an implicit dependency of the SDK on a prior Kernel compilation. Change target/Makefile to make this dependency explicit to avoid race conditions with parallel builds. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "mwl8k: remove synchronous device init hack"Felix Fietkau2016-11-041-0/+20
| | | | | | | This reverts commit cb037d1842d93b37457c896a8949e135ed6e0065. See 6aa07b82027f for more information Signed-off-by: Felix Fietkau <nbd@nbd.name>
* include: Cortex-A53 is also an AArch64 CPUFlorian Fainelli2016-11-041-0/+1
| | | | | | | | Specifying a mtune option with cortex-a53 is also valid for an aarch64 toolchain Fixes: SVN 48964 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ipq806x: fix zyxel image build errorFelix Fietkau2016-11-041-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: clean up the kernel config and reduce kernel image size by ↵Felix Fietkau2016-11-041-50/+7
| | | | | | disabling some unnecessary code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: fix a kconfig issueFelix Fietkau2016-11-041-0/+30
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "mac80211: remove ath10k delayed initialization hack"Felix Fietkau2016-11-041-0/+33
| | | | | | | | | This reverts commit efd9dec3195c603289ebb552f8650da9dd869828. ath10k can take a long time to probe, long enough for netifd to fail to initialize already configured wireless devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target/sdk: Switch to xz compression instead of bz2Daniel Engberg2016-11-041-4/+4
| | | | | | Switch to xz compression instead of using bz2. This makes a considerable difference in size, ar71xx SDK from 60M to 35M. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* apm821xx: add back end-of-UBI marker for the WNDR4700 and MR24Christian Lamparter2016-11-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch "build: drop UBI EOF marker from images by default" (commit d27bce8d28eb129af0abd9c80a7756301b7d588a) removed the end-of-UBI marker. Without this marker, the boards will panic during boot: [ 1.683458] ubi0: attaching mtd4 [ 1.696181] ubi0 warning: scan_peb: valid VID header but corrupted EC header at PEB 31 [ 1.704367] ubi0 error: scan_peb: bad image sequence number 549886691 in PEB 32, expected 184585623 [ 1.713377] Erase counter header dump: [ 1.717110] magic 0x55424923 [ 1.720843] version 1 [ 1.723797] ec 0 [ 1.726752] vid_hdr_offset 512 [ 1.729880] data_offset 2048 [ 1.733094] image_seq 549886691 [ 1.736740] hdr_crc 0x92ba8130 [ 1.740472] erase counter header hexdump: [ 1.744493] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd4, error -22 [ 1.751528] UBI error: cannot attach mtd4 [ 1.755373] hctosys: unable to open rtc device (rtc0) [ 1.761130] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 1.768604] Please append a correct "root=" boot option; here are the available partitions: [...] [ 1.856992] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.866519] Rebooting in 1 seconds..Auto calibration --- Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mt76: update to the latest version, adds a tx queue configuration fixFelix Fietkau2016-11-041-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix A-MSDU tx aggregation (FS#174)Felix Fietkau2016-11-041-0/+34
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: minor cleanupFelix Fietkau2016-11-041-0/+29
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix a tx A-MPDU aggregation issueFelix Fietkau2016-11-041-0/+30
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: use external pci clock on ARV7506PW11Mathias Kresin2016-11-031-0/+1
| | | | | | | Fixes a ralink wireless driver related kernel crash as soon as a lot of data is tranfered via wireless. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: cleanup dts filesMathias Kresin2016-11-0333-312/+35
| | | | | | | | | | | | | | - remove not existing properties - remove properties having the same values as the included dtsi - remove nodes which are disabled in the included dtsi and not enabled in dts - replace the deprecated pinctrl-* compatible strings - use the same labels for nodes as the included dtsi - move common used vr9 pci properties to vr9.dtsi - remove the unused stp node from HomeHub 2B devcie tree source file - fix spaces vs. tabs and remove superfluous linebreaks Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: replace the previous fix with a revert of the faulty upstream commitFelix Fietkau2016-11-031-5/+6
| | | | | | This avoids potential breakage in rt2x00usb Signed-off-by: Felix Fietkau <nbd@nbd.name>
* elfutils: bump to 0.167Luiz Angelo Daros de Luca2016-11-038-134/+16
| | | | Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* mwl8k: remove synchronous device init hackFelix Fietkau2016-11-031-20/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove ath10k delayed initialization hackMathias Kresin2016-11-031-33/+0
| | | | | | | | | LEDE no longer requires all PHYs to be initialized to create the configuration files during bootup. This patch removes the now obsolete ath10k patch. Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files, mac80211, broadcom-wl: wifi detection and configurationChristian Lamparter2016-11-035-6/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the wifi detection script is executed as part of the (early) boot process. Pluggable wifi USB devices, which are inserted at a later time are not automatically detected and therefore they don't show up in LuCI. A user has to deal with wifi detection manually, or restart the router. However, the current "sleep 1" window - which the boot process waits for wifi devices to "settle down" - is too short to detect wifi devices for some routers anyway. For example, this can happen with USB WLAN devices on the WNDR4700. This is because the usb controller needs to load its firmware from UBI and initialize, before it can operate. The issue can be seen on a BT HomeHub 5A as well as soon as the caldata are on an ubi volume. This is because the ath9k card has to be initialized by owl-loader first. Which has to wait for the firmware extraction script to retrieve the pci initialization values inside the caldata. This patch moves the wifi configuration to hotplug scripts. For mac80211, the wifi configuration will now automatically run any time a "ieee80211" device is added. Likewise broadcom-wl's script checks for new "net" devices which have the "wl$NUMBER" moniker. Issues with spawning multiple interface configuration - in case the detection script is run concurrently - have been resolved by using a named section for the initial configuration. Concurrent configuration scripts will now simply overwrite the same existing configuration. A workaround which preserves the "sleep 1" window for just the first boot has been added. This allows the existing brcm47xx boot and mvebu uci-default scripts to correctly setup the initial mac addresses and regulatory domain. And finally, the patch renames the "wifi detect" into "wifi config". As the script no longer produces any output that has to be redirected or appended to the configuration file. Thanks to Martin Blumenstingl for helping with the implementation and testing of the patch. Acked-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files, mac80211, broadcom-wl: use uci to populate wireless configChristian Lamparter2016-11-033-42/+37
| | | | | | | | | | | | | | | | | | | | Previously, wifi detect simply dumped its generated wireless configuration to STDOUT. A second step was needed to append the configuration to /etc/config/wireless (or create it, if it didn't exist). With this patch, The wifi detection script will now use uci to update the wireless configuration directly. This patch also makes the initially created wifi-iface a named section ('default_radio$X' for mac80211 and 'default_wl$X' for broadcom). With this change, uci will not print the cfgHASH to STDOUT (which would now corrupt the wireless configuration). It will also prevent adding duplicated wifi interface configurations, if the wifi configuration is run concurrently. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: generate /etc/config/wireless, if it doesn't existMathias Kresin2016-11-031-0/+2
| | | | | | | | | | | | This patch adds a check in "wifi detect" to test if the wireless configuration file does exist. If it doesn't exist, an empty /etc/config/wireless file will be created. This is necessary because uci doesn't create new files, instead the tool just exits with "uci: Entry not found". Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: fix regdomain change issues with CONFIG_ATH_USER_REGDFelix Fietkau2016-11-032-21/+38
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix a minor issue in the header padding patchFelix Fietkau2016-11-031-0/+9
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix AP powersave issues introduced in the last wireless-testing ↵Felix Fietkau2016-11-031-0/+27
| | | | | | update (FS#241) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/feeds: use 10 chars for feed name column widthRafał Miłecki2016-11-031-1/+1
| | | | | | | | It's always hard to find a reasonable width that will make everyone happy. This one at least makes "telephony" (one of default feeds) name fit the column and hopefully isn't too big. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq806x: update DT in accordance to new drivers And add some more DT nodesPavel Kubelun2016-11-037-214/+90
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: switch to generic cpufreq driver cpufreq-dtPavel Kubelun2016-11-035-466/+383
| | | | | | | | This fixes ondemand frequency scaling and moves ipq806x onto upstream driver Also switching to ondemand frequency scaling as it is fixed now Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 21:53:25 +0000