aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: convert TP-Link Archer C7v1/2 Wifis to nvmem-cellsChristian Lamparter2021-11-283-10/+38
| | | | | | | | | | | | | | | For v2, both ath9k (2.4GHz Wifi) and ath10k (5 GHz) driver now pull the (pre-)calibration data from the nvmem subsystem. v1 is slightly different as only the ath9k Wifi is supported. This allows us to move the userspace caldata extraction and mac-address patching for the 5GHZ ath10k supported wifi into the device-tree definition of the device. ath9k's nodes are also changed over to use nvmem-cells over OpenWrt's custom mtd-cal-data property. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath10k: support nvmem-cells for (pre-)calibrationChristian Lamparter2021-11-288-24/+348
| | | | | | refreshes mac80211 + ath10k-ct patches. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mpc85xx: backport "fix oops when CONFIG_FSL_PMC=n"Christian Lamparter2021-11-281-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Martin Kennedy reported: |Presently, I get this kernel panic on mpc85xx (Aerohive HiveAP 370) |on OpenWrt 'master' which occurs right as the second processor is |initialized: | |[ 0.478804] rcu: Hierarchical SRCU implementation. |[ 0.535569] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build |[ 0.627233] smp: Bringing up secondary CPUs ... |[ 0.681659] kernel tried to execute user page (0) - exploit attempt? (uid: 0) |[ 0.766618] BUG: Unable to handle kernel instruction fetch (NULL pointer?) |[ 0.848899] Faulting instruction address: 0x00000000 |[ 0.908273] Oops: Kernel access of bad area, sig: 11 [#1] |[ 0.972851] BE PAGE_SIZE=4K SMP NR_CPUS=2 P1020 RDB |[ 1.031179] Modules linked in: |[ 1.067640] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.80 #0 |[ 1.139507] NIP: 00000000 LR: c0021d2c CTR: 00000000 |[ 1.199921] REGS: c1051cf0 TRAP: 0400 Not tainted (5.10.80) |[...] |[ 1.758220] NIP [00000000] 0x0 |[ 1.794688] LR [c0021d2c] smp_85xx_kick_cpu+0xe8/0x568 |[ 1.856126] Call Trace: |[ 1.885295] [c1051da8] [c0021cb8] smp_85xx_kick_cpu+0x74/0x568 (unreliable) |[ 1.968633] [c1051de8] [c0011460] __cpu_up+0xc0/0x228 |[ 2.029038] [c1051e18] [c0031bbc] bringup_cpu+0x30/0x224 |[ 2.092572] [c1051e48] [c0031f3c] cpu_up.constprop.0+0x180/0x33c |[..] |[ 2.727952] ---[ end trace 9b796a4bafb6bc14 ]--- |[ 3.800879] Kernel panic - not syncing: Fatal exception |[ 3.862353] Rebooting in 1 seconds.. |[ 5.905097] System Halted, OK to turn off power | |I bisected this down to commit 3ae5da5adce9 ("kernel: bump 5.10 to 5.10.80"); |that is, I don't get the panic right before this commit, but I do after. He reported the issue upstream and Xiaoming Ni from huawei came up with the patch (that is on it's way to upstream). While the AP370 is not in Openwrt, this will likely affect other SMP P1020 devices OpenWrt ships with: like the AP330, Enterasys WS-AP3710i, etc. Reported-by: Martin Kennedy <hurricos@gmail.com> Tested-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: purge clk_ignore_unused bootargChristian Lamparter2021-11-272-2/+2
| | | | | | | | | these flags have been creeping in from the QSDK. All needed clocks should be accounted for, and if a device is broken due to this. It should be looked into. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: update 105-ipq40xx-fix-sleep-clock.patchChristian Lamparter2021-11-271-13/+10
| | | | | | Bjorn Anderson has suggestions which would help to upstream the patch. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uboot-lantiq: danube: fix hanging lzma kernel uncompression #2Mathias Kresin2021-11-271-0/+9
| | | | | | | Follow up to commit 565b62cca2fc7d27f1f1584c44830a6e5c4f0f61. Managed to hit the very same issue again while playing with the NOR SPL builds. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: set maximum kernel size for P2812HNUF3Mathias Kresin2021-11-271-0/+2
| | | | | | | | | | | The board has a fixed size kernel partition but do not limit the kernel size during image building. Disable image building for both boards as well, since the kernel of the last release as well as master are to big to fit into the 2 MByte kernel partition. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: drop kernel 5.4 supportAleksander Jan Bajkowski2021-11-2734-11702/+0
| | | | | | | | The current state of the kernel 5.4 support is in the openwrt-21.02 branch. No need to keep a not default used kernel in this branch. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [VRX268/ bthub5]
* lantiq: switch to kernel 5.10Aleksander Jan Bajkowski2021-11-271-1/+1
| | | | | | | Use kernel 5.10 by default. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [VRX268/ bthub5]
* lantiq: ar7: use okli loader for FRITZ!BoxMathias Kresin2021-11-274-3/+46
| | | | | | | | | | With Kernel 5.10 the ar7 FRITZ!Box are not booting the initramfs nor the sysupgrade image any more. Presumably due to the grown kernel. Use the okli preloader to workaround the bootloader issue. No solution so far for the initramfs. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: bring back okli loaderMathias Kresin2021-11-2719-0/+2004
| | | | | | | | | | | | | Removed due to being unused with 1f7a03a70603, but now required for the ar7 FRITZ!Box. Could be used for the ARV7519RW22 as well, for which the image generation was disabled due to a stock u-boot issue with kernel bigger than 2 MByte. The code is combination of the ath79 and ramips okli loader. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-mvebu: update to v2021.10Andre Heider2021-11-271-2/+2
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: bump mv-ddr-marvell to current versionAndre Heider2021-11-271-3/+3
| | | | | | | | | | | efcad0e Merge pull request #33 from Semihalf/cn913x_cex7_eval 91bed2c cn913x: Add cn913x_cex7_eval config 55139f6 Merge pull request #32 from pali/master e5573cc ARM: mvebu: a38x: Correct mismatched bound warnings d83c38b a3700: Remove duplicate check for DDR_TYPE c0c6bf7 a3700: Put temporary a3700_ddr_type file into $(OBJ_DIR) Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: bump a3700-utils to current versionAndre Heider2021-11-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | With cryptocpp in place we can now update past the point of dropping the old tbb_linux binary and build it instead. Hauke confirmed that this also allows this firmware to be built on aarch64. 97f01f5 Wtpdownloader: Properly retrieve current tty options a33ff86 Wtpdownloader: Set CREAD tty cflag af461d2 Wtpdownloader: Fix stuck during opening UART tty device 38c2135 Makefile: Print error when specified CLOCKSPRESET is not valid f014428 TBB: Remove out-of-dated x86-64 ELF binary tbb_linux 1b6cb50 TBB: Fix compilation with Crypto++ 5.6.5 d9fb291 TBB: Fix memory corruptions by calling correct delete[] operator d575885 TBB: Fix initializing CCTIM object b9e1c4e Wtpdownloader: Fix makefile 8f61591 Wtpdownloader: Fix building with gcc 11 eabea5f TBB: Fix building with gcc 11 Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: add cryptoppJosef Schlehofer2021-11-272-20/+18
| | | | | | | | | | | | | | | Based on the Build Instructions for Trusted-Firmware-A [1], there is a required cryptopp [2]. In the past, it used 'tbb_linux' image tool binary, which seems to be buggy, deprecated and removed from A3700-utils-marvell and it should not be used anymore. That's why I removed 001-imagetool.patch, which is no longer necessary. [1] https://trustedfirmware-a.readthedocs.io/en/v2.5/plat/marvell/armada/build.html [2] https://cryptopp.com/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* arm-trusted-firmware-mvebu: fix commit ids to for mv-ddr-marvellKerma Gérald2021-11-271-0/+12
| | | | | | | | | | without this patch a3700-utils/tim/ddr/ddr_tool.verstr contains the OpenWrt commit ID. this patch fix the mv_ddr version commit ID by using the global variable MV_DDR_COMMIT_ID. Upon boot it now prints "mv_ddr-devel-g02e23dbc-d DDR4 16b 1GB 1CS". Cc: Andre Heider <a.heider@gmail.com> Signed-off-by: Kerma Gérald <gandalf@gk2.net>
* kernel: bump 5.10 to 5.10.82John Audia2021-11-2720-96/+40
| | | | | | | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/033-v5.16-0014-ARM-dts-NSP-Fix-mpcore-mmc-node-names.patch Manually rebased: ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.81John Audia2021-11-279-14/+14
| | | | | | | | | | | | | Manually rebased: octeontx/patches-5.10/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* ath10k-ct: use 5.15 versionAnsuel Smith2021-11-276-109/+72
| | | | | | | | | | | We switched to mac80211 5.15 backport version. Also switch ath10k-ct to 5.15 and drop the mac address patch that got merged upstream. Compile and tested on ipq806x Netgear R7800. Also update the ath10k-ct to latest version to fix a typo for the new version in the kernel log. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* tools/ccache: update to 4.5.1Rosen Penev2021-11-261-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/cmake: update to 3.22.0Rosen Penev2021-11-263-4/+4
| | | | | | Refreshed patches. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* llvm-bpf: fix rebuild check for generating tarballFelix Fietkau2021-11-261-1/+1
| | | | | | Check the version file, as it will be regenerated on rebuild Signed-off-by: Felix Fietkau <nbd@nbd.name>
* llvm-bpf: use SOURCE_DATE_EPOCH for generated tarballFelix Fietkau2021-11-261-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix a regression in generating radiotap headersFelix Fietkau2021-11-261-0/+49
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport fix for dealing with stripped IV on rxFelix Fietkau2021-11-261-0/+26
| | | | | | This fixes potental rx drop issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add beacon_interval to get_status ubus outputDavid Bauer2021-11-251-0/+1
| | | | | | | | | | Add the beacon interval to hostapd status output. This allows external services to discover the beacon interval for a specific VAP. This way, external wireless management daemons can correctly calculate fields containing TBTT value from absolute time-values. Signed-off-by: David Bauer <mail@david-bauer.net>
* realtek: Remove _machine_restart and _machine_haltSander Vanheule2021-11-241-85/+0
| | | | | | | | | | | | | | By dropping _machine_restart, users can provide more reliable or device-specific restart modes. _machine_halt was already removed in commit f4b687d1f053 ("realtek: use kernel defined halt"), but quietly reintroduced in commit 8faffa00cb6b ("realtek: add support for the RTL9300 timer"). Let's remove it again. Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* realtek: Add and enable watchdog nodeSander Vanheule2021-11-243-1/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add and enable the Realtek Otto WDT peripheral found on these SoCs. Default all devices to use standard (cold) reboot and "soc" resets. Devices that require the PLL value fixup before restarting, should pick the "cpu" or "software" reset mode. These devices also need to provide a custom reboot mode, by adding the reboot argument to the kernel command line: WDT reset mode | kernel reboot mode ----------------+--------------------------------------- soc | reboot=cold (default if not specified) cpu | reboot=warm software | reboot=software Preferrably, these devices should use an alternative restart method like gpio-restart to provide reliable restarts. Note that watchdog restarts are not yet exposed, since the _machine_restart override is still present. Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* realtek: Backport Realtek Otto WDT driverSander Vanheule2021-11-243-0/+486
| | | | | | | | | | | Add patch submitted upstream to linux-watchdog and replace the MIPS architecture symbols. Requires one extra patch for the DIV_ROUND_* macros, which have moved to a different header since 5.10. Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* realtek: Add Lexra bus clockSander Vanheule2021-11-242-8/+13
| | | | | | | | | | | | | | | | | The CPU peripherals on RTL83xx/RTL930x are connected to the CPU via the Lexra bus. This bus can provide a clock signal to these peripherals, but no clock driver is currently available. Instead, use a fixed-clock to provide the clock frequency, and update the dependent peripherals. Lexra bus clock frequencies: - RTL838x: 200MHz - RTL839x: 200MHz - RTL930x: 175MHz Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* realtek: Consolidate bootargsSander Vanheule2021-11-248-26/+2
| | | | | | | | | | All current devices use identical bootargs, so let's move that to the common devicetree includes. Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* realtek: reset both ethernet NIC and queuesSander Vanheule2021-11-241-4/+7
| | | | | | | | | | | | | | | Recent versions of Realtek's SDK reset both the ethernet NIC and queues (SW_NIC_RST and SW_Q_RST bits) when initialising the hardware. Furthermore, when issuing a CPU reset on the Zyxel GS1900-8 (not supported by any current driver), the networking part of the SoC is not reset. This leads to unresponsive network after the restart. By resetting both the ethernet NIC and queues, networking always comes up reliably. Suggested-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: add a patch that allows processing auth requests for peers in ↵Felix Fietkau2021-11-243-6/+40
| | | | | | | | | | | | | | | blocked state If authentication fails repeatedly e.g. because of a weak signal, the link can end up in blocked state. If one of the nodes tries to establish a link again before it is unblocked on the other side, it will block the link to that other side. The same happens on the other side when it unblocks the link. In that scenario, the link never recovers on its own. To fix this, allow restarting authentication even if the link is in blocked state, but don't initiate the attempt until the blocked period is over. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add a fix for kernel warnings when forwarding packets in mesh modeFelix Fietkau2021-11-241-0/+62
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix regression in SSN handling of addba txFelix Fietkau2021-11-241-0/+44
| | | | | | | | Some drivers that do their own sequence number allocation (e.g. ath9k, mwlwifi) rely on being able to modify params->ssn on starting tx ampdu sessions. This was broken by a change that modified it to use sta->tid_seq[tid] instead. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: allow hostapd under ujail to communicate with hostapd_cliMark Mentovai2021-11-231-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When procd-ujail is available, 1f785383875a runs hostapd as user "network", with only limited additional capabilities (CAP_NET_ADMIN and CAP_NET_RAW). hostapd_cli (CONFIG_PACKAGE_hostapd-utils) communicates with hostapd over a named UNIX-domain socket. hostapd_cli is responsible for creating this socket at /tmp/wpa_ctrl_$pid_$counter. Since it typically runs as root, this endpoint is normally created with uid root, gid root, mode 0755. As a result, hostapd running as uid network is able to receive control messages sent through this interface, but is not able to respond to them. If debug-level logging is enabled (CONFIG_WPA_MSG_MIN_PRIORITY <= 2 at build, and log_level <= 2 in /etc/config/wireless wifi-device), this message will appear from hostapd: CTRL: sendto failed: Permission denied As a fix, hostapd_cli should create the socket node in the filesystem with uid network, gid network, mode 0770. This borrows the presently Android-only strategy already in hostapd intended to solve the same problem on Android. If procd-ujail is not available and hostapd falls back to running as root, it will still be able to read from and write to the socket even if the node in the filesystem has been restricted to the network user and group. This matches the logic in package/network/services/hostapd/files/wpad.init, which sets the uid and gid of /var/run/hostapd to network regardless of whether procd-ujail is available. As it appears that the "network" user and group are statically allocated uid 101 and gid 101, respectively, per package/base-files/files/etc/passwd and USERID in package/network/services/hostapd/Makefile, this patch also uses a constant 101 for the uid and gid. Signed-off-by: Mark Mentovai <mark@moxienet.com> [refreshed patch] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2021-11-231-3/+3
| | | | | | | | | | | f0a5b1118fa4 mt76: mt7915: fix decap offload corner case with 4-addr VLAN frames 67f93aa9a207 mt76: mt7615: fix decap offload corner case with 4-addr VLAN frames 46261d4bbfb5 mt76: fix possible pktid leak a7fdd272efee mt76: mt7921: move mt76_connac_mcu_set_hif_suspend to bus-related files 3d9e13f567a4 mt76: mt7921s: fix the device cannot sleep deeply in suspend 99225b985cbc mt76: mt7615: fix unused tx antenna mask in testmode Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix crash in drivers relying on mac80211 retransmitting packets ↵Felix Fietkau2021-11-231-0/+35
| | | | | | | | for powersave clients This showed up primarily on rt2x00 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: fix ismounted checkOldřich Jedlička2021-11-231-2/+2
| | | | | | | | Fix the return value, shell return codes should be 0 to indicate success (i.e. mount point found), 1 should be failure (i.e. mount point not-found). Fixes: ac4e8aa ("dnsmasq: fix more dnsmasq jail issues") Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
* procd: setup /dev/stdin, /dev/stdout and /dev/stderr symlinksJo-Philipp Wich2021-11-231-1/+11
| | | | | | | | Extend the hotplug.json ruleset to setup the common /dev/std{in,out,err} symbolic links which are needed by some applications, e.g. nftables when applying rulesets from stdin. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* procd: update to git HEADDaniel Golle2021-11-231-3/+3
| | | | | | | | | 8de12de system: add diskfree infos to ubus bf3fe0e service: move jail parsing to end of instance parser 87b5836 procd: add full service shutdown prior to sysupgrade 01ac2c4 procd: service_stop_all: also kill inittab actions Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm53xx: fix platform clocks & USB 2.0 PHYRafał Miłecki2021-11-231-0/+62
| | | | | | | | This fixes WARNing, missing clocks and [ 10.422481] bcm_ns_usb2 1800c164.usb2-phy: Clock not defined Fixes: 5901917b936d ("bcm53xx: use more upsteam DT patches from 5.16 / 5.17") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: use new USB 2.0 PHY bindingRafał Miłecki2021-11-232-0/+183
| | | | | | | | | | | This fixes: [ 10.440495] bcm_ns_usb2 1800c000.usb2-phy: can't request region for resource [mem 0x1800c000-0x1800cfff] [ 10.450039] bcm_ns_usb2 1800c000.usb2-phy: Failed to map DMU regs [ 10.456183] bcm_ns_usb2: probe of 1800c000.usb2-phy failed with error -16 caused by conflict in allocating resources. Fixes: f55f1dbaad33 ("bcm53xx: switch to the kernel 5.10") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Revert "ath79: add support for Mikrotik LHG 5"Hauke Mehrtens2021-11-236-177/+0
| | | | | | | | This reverts commit 48774decea9b42e97edd53ce33e574de7d85f3df. This commit does not contain a valid name in the Signed-off-by line. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* qosify: update to the latest versionFelix Fietkau2021-11-221-3/+3
| | | | | | 06872673c10f map: allow referring to a class index directly in tcp/udp default entries Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: install hotplug handler into /etc/hotplug.d/iface as wellFelix Fietkau2021-11-221-1/+9
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-11-221-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 5dd32475c859 mt76: mt7915: get rid of mt7915_mcu_set_fixed_rate routine f5cfaaff3dd1 mt76: mt7921: drop offload_flags overwritten f5ad840ca5c0 mt76: mt7615: fix possible deadlock while mt7615_register_ext_phy() 29a8a08827b1 mt76: mt7921: fix MT7921E reset failure f44685f2faee mt76: mt7915: fix return condition in mt7915_tm_reg_backup_restore() ae8e02ddd2b0 mt76: mt7915: fix SMPS operation fail e814e15716b0 mt76: reverse the first fragmented frame to 802.11 c9bca3ed9566 mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_mode dd054b7e16e7 mt76: only set rx radiotap flag from within decoder functions f1520c9bb332 mt76: mt7915: add default calibrated data support 0c489ea2865a mt76: testmode: add support to set MAC 91c5da3d0a7c mt76: mt7921: add support for PCIe ID 0x0608/0x0616 ca39b4bbc227 mt76: debugfs: fix queue reporting for mt76-usb 00b6f497e2e8 mt76: mt7921: introduce 160 MHz channel bandwidth support c1574466c733 mt76: fix possible OOB issue in mt76_calculate_default_rate 9680a17b0aed mt76: mt7921: fix possible NULL pointer dereference in mt7921_mac_write_txwi 78fc0dcdcef0 mt76: connac: fix a theoretical NULL pointer dereference in mt76_connac_get_phy_mode 05953e7d6fe7 mt76: mt7615: remove dead code in get_omac_idx 39f6c37127c1 mt76: connac: remove PHY_MODE_AX_6G configuration in mt76_connac_get_phy_mode 526591b203f3 mt76: do not pass the received frame with decryption error 256789bb400f mt76: fix the wiphy's available antennas to the correct value fa187f5cf068 mt76: fix timestamp check in tx_status 11ebf11a3587 mt76: mt7915: fix the wrong SMPS mode 8c69b815ee7f mt76: mt7921: honor mt76_connac_mcu_set_rate_txpower return value in mt7921_config bc6798f729f9 mt76: move sar utilities to mt76-core module b1d0ad2e74fe mt76: mt76x02: introduce SAR support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: specify switch ports on TP-LINK devicesRafał Miłecki2021-11-221-0/+92
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: set beamformer/beamformee number of antennas in VHT capsFelix Fietkau2021-11-221-0/+16
| | | | | | Without this, beamforming is probably not working Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/llvm-bpf: move tarball packing to target/llvm-bpfFelix Fietkau2021-11-224-16/+39
| | | | | | | This ensures that the tarball is regenerated after make clean or after switching to a different target Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 06:49:29 +0000