aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* x86: add/improve support for Sophos SG/XG productsStan Grishin2021-12-112-4/+13
| | | | | | | | | * Better product ID for Sophos SG/XG-105 models * Add support for Sophos SG/XG-135 r1, r2 with/without wireless Signed-off-by: Stan Grishin <stangri@melmac.ca> [Changed subject to x86 - probably eaten somewhere, the PR had it] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add more disabled config optionsJosef Schlehofer2021-12-111-0/+2
| | | | | | | | | | | | | | | | | | NET_DSA_MSCC_FELIX: Marvell 88E6xxx Ethernet switch fabric support (NET_DSA_MV88E6XXX) [N/m/y/?] n Ocelot / Felix Ethernet switch support (NET_DSA_MSCC_FELIX) [N/m/y/?] (NEW) Error in reading or end of file. make[6]: *** [scripts/kconfig/Makefile:71: syncconfig] Error 1 make[5]: *** [Makefile:603: syncconfig] Error 2 IR_IMON_RAW: SoundGraph iMON Receiver (early raw IR models) (IR_IMON_RAW) [N/m/?] (NEW) Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> [squashed with "kernel: add missing IR_IMON_RAW config symbol"] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* hostapd: add support for specifying the FILS DHCP serverFelix Fietkau2021-12-103-1/+18
| | | | | | | | The 'fils_dhcp' option can be set to '*' in order to autodetect the DHCP server For proto=dhcp networks, the discovered dhcp server will be used For all other networks, udhcpc is called to discover the address Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: on dhcp interfaces, store the dhcp server in interface dataFelix Fietkau2021-12-101-0/+1
| | | | | | | | Among other things, this can be used to auto-configure the DHCP server address for wireless APs using FILS, if the bridged interface is configured to DHCP Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for enabling FILS on AP and client interfacesFelix Fietkau2021-12-101-4/+37
| | | | | | This is only supported with WPA-enterprise Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: enable FILS support in the full config and add build feature discoveryFelix Fietkau2021-12-109-18/+42
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/mkimage: fix build on MacOS arm64Sergey V. Lobanov2021-12-061-0/+47
| | | | | | | | | | | | Fixed -no-pie compilation warning on MacOS Fixed errors related to using absolute addressing on MacOS arm64 Based on upstream patch from Jessica Clarke and suggestions from Ronny Kotzschmar Link to original patch and discussion: https://github.com/u-boot/u-boot/commit/3b142045e8a7f0ab17b6099e9226296af45967d0 Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
* ramips: add support for Zbtlink ZBT-WG1602Sergey Ryazanov2021-12-053-0/+228
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zbtlink ZBT-WG1602 is a Wi-Fi router intendent to use with WWAN (UMTS/LTE/3G/4G) modems. The router board offsers a couple of miniPCIe slots with USB and SIM only and another one pure miniPCIe slot as well as five Gigabit Ethernet ports (4xLAN + WAN). Specification: * SoC: MT7621A * RAM: 256/512 MiB * Flash: 16/32 MiB (SPI NOR) * external watchdog (looks like Torexsemi XC6131B) * Eth: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN) * WLAN 2GHz: MT7603EN (.11n, MIMO 2x2) * WLAN 5GHz: MT7612EN (.11ac, MIMO 2x2) * WLAN Ants: detachable x2, shared by 2GHz & 5GHz radios * miniPCIe: 2x slots with USB&SIM + 1x slot with regular PCIe bus * WWAN Ants: detachable x4 * External storage: microSD (SDXC) slot * USB: 2.0 Type-A port * LED: 11 (5 per Eth phy, 3 SoC controlled, 2 WLAN 2/5 controlled, 1 power indicator) * Button: 1 (reset) * UART: console (115200 baud) * Power: DC jack (12 V / 2.5 A) Additional HW information: * SoC USB port #1 is shared by internal miniPCIe slot and external Type-A USB port, USB D+/D- lines are toggled between ports using a GPIO controlled DPDT switch. * Power of the USB enabled miniPCIe slots can be individually controlled using dedicated GPIO lines. * Vendor firmware feeds the external watchdog with 1s pulses. GPIO watchdog driver is able to either generate a 1us pulses or toggle the output line. 1us is not enough for the external watchod timer, so the line toggling driver mode is utilized. Installation: Vendor's firmware is OpenWrt (LEDE) based, so the sysupgrade image can be directly used to install OpenWrt. Firmware must be upgraded using the 'force' and 'do not save configuration' command line options (or correspondig web interface checkboxes) since the vendor firmware is from the pre-DSA era. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* ath79: add support for TP-Link EAP225 v1Sander Vanheule2021-12-054-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link EAP225 v1 is an AC1200 (802.11ac Wave-1) ceiling mount access point. Device specifications: * SoC: QCA9563 @ 775MHz * RAM: 128MiB DDR2 * Flash: 16MiB SPI-NOR * Wireless 2.4GHz (SoC): b/g/n, 2x2 * Wireless 5Ghz (QCA9882): a/n/ac, 2x2 * Ethernet (AR8033): 1× 1GbE, 802.3at PoE Flashing instructions: * Ensure the device is upgraded to firmware v1.4.0 * Exploit the user management page in the web interface to start telnetd by changing the username to `;/usr/sbin/telnetd -l/bin/sh&`. * Immediately change the malformed username back to something valid (e.g. 'admin') to make ssh work again. * Use the root shell via telnet to make /tmp world writeable (chmod 777) * Extract /usr/bin/uclited from the device via ssh and apply the binary patch listed below. The patch is required to prevent `uclited -u` in the last step from crashing. * Copy the patched uclited binary back to the device at /tmp/uclited (via ssh) * Upload the factory image to /tmp/upgrade.bin (via ssh) * Run `chmod +x /tmp/uclited && /tmp/uclited -u` to install OpenWrt. uclited patching: --- xxd uclited +++ xxd uclited-patched @@ -53811,7 +53811,7 @@ 000d2330: 8c44 0000 0320 f809 0000 0000 8fbc 0010 .D... .......... 000d2340: 8fa6 0a4c 02c0 2821 8f82 87c4 0000 0000 ...L..(!........ -000d2350: 8c44 0000 0c13 461c 27a7 0018 8fbc 0010 .D....F.'....... +000d2350: 8c44 0000 2402 0000 0000 0000 8fbc 0010 .D..$........... 000d2360: 1040 001d 0000 1821 8f99 8378 3c04 0058 .@.....!...x<..X 000d2370: 3c05 0056 2484 ad68 24a5 9f00 0320 f809 <..V$..h$.... .. To make sure the correct file is patched, the following MD5 checksums should match the unpatched and patched files: 4bd74183c23859c897ed77e8566b84de uclited 4107104024a2e0aeaf6395ed30adccae uclited-patched Debricking: * Serial port can be soldered on unpopulated 4-pin header (1: TXD, 2: RXD, 3: GND, 4: VCC) * Bridge unpopulated resistors running from pins 1 (TXD) and 2 (RXD). Do NOT bridge the pull-down for pin 2, running parallel to the header. * Use 3.3V, 115200 baud, 8n1 * Interrupt bootloader by holding CTRL+B during boot * tftp initramfs to flash via the LuCI web interface setenv ipaddr 192.168.1.1 # default, change as required setenv serverip 192.168.1.10 # default, change as required tftp 0x80800000 initramfs.bin bootelf $fileaddr Tested by forum user KernelMaker. Link: https://forum.openwrt.org/t/eap225-v1-firmware/87116 Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: sort the port list numericallyBjørn Mork2021-12-051-4/+1
| | | | | | | | | | | Mac adresses are assigned in the order given by the port list. The interfaces are also brought up in this order. This target supports devices with up to 52 ports. Sorting these alphabetically is very confusing, and assigning mac addresses in alphabetic order does not match stock firmware behaviour. Suggested-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: update watchdog timer patchSander Vanheule2021-12-051-22/+45
| | | | | | | | The Realtek Otto watchdog timer driver was accepted upstream, and is queued for 5.17. Update the patch's file name, and replace by the final version. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* x86: added support to generate VHDX imagesOldřich Jedlička2021-12-054-2/+14
| | | | | | | Added support to generate dynamic-sized VHDX images for Hyper-V. Compile-tested on x86 and run-tested on Windows 10 21H2 (Hyper-V). Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
* tools/meson: update to 0.60.1Rosen Penev2021-12-052-4/+4
| | | | | | | | | | | | change meson binary to use py extension. Fixes issue with meson's symbolextractor using the host python instead of the system one. We intentionally use a .py extension here so that meson launches additional python scripts with the same build host python interpreter as itself is running under (and not the host package one once it becomes available) Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: add kmod-video-gspca-sq930xJosef Schlehofer2021-12-051-0/+15
| | | | | | | | This module adds support for USB WebCams, which uses SQ930X chip [1]. [1] https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SQ930X.html Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: btrfs: enable ACLJosef Schlehofer2021-12-051-1/+0
| | | | | | | | | | | | | | | | | By default CONFIG_BTRFS_FS_POSIX_ACL is disabled, it should be enabled only when you enable CONFIG_FS_POSIX_ACL. Right now, when you enable CONFIG_FS_POSIX_ACL it will enable CONFIG_BTRFS_FS_POSIX_ACL, but it will be disabled once you install kmod-btrfs. This should prevent it. Btrfs has enabled by default ACL for mount option. More details: https://cateee.net/lkddb/web-lkddb/BTRFS_FS_POSIX_ACL.html https://btrfs.wiki.kernel.org/index.php/Manpage/btrfs(5) Signed-off-by: Josef Schlehofer <josef.schlehofer@nic.cz>
* ipq806x: revert SDC clock changes for NBG6817 MMCShane Synan2021-12-052-24/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert the SDC "CLK_SET_RATE_GATE" changes to the SDC clock regulator structures. See https://elinux.org/images/b/b8/Elc2013_Clement.pdf > if ((clk->flags & CLK_SET_RATE_GATE) && clk->prepare_count) { > > For this particular clock, setting its rate is possible only if the > clock is ungated (not yet prepared) This fixes the MMC failing to initialize on newer ZyXEL NBG6817 hardware revisions with Kingston MMC. Older revisions should hopefully be unaffected. Check MMC hardware details with: cd /sys/block/mmcblk0/device/ && \ tail -v cid date name manfid fwrev hwrev oemid rev Known problematic MMC names (broken before this commit): * M62704 (dated 12/2018) via myself * M62704 (dated 11/2018) via Drake Stefani Known unaffected MMC names (already working without this commit): * S10004 (dated 12/2015) via slh Without enabling dynamic debugging, this error manifests in the kernel hardware serial console as the following: [ 2.746605] mmc0: error -110 whilst initialising MMC card […trimmed other messages…] [ 2.877832] Waiting for root device /dev/mmcblk0p5... Enabling Linux dynamic kernel debugging provides additional messages. For guidance, see the Linux kernel documentation: https://www.kernel.org/doc/html/latest/admin-guide/dynamic-debug-howto.html First, enable dynamic debugging in OpenWRT's configuration: 1. Run "make menuconfig" 2. Select "Global build settings --->" 3. Select "Kernel build options --->" 4. Enable "Compile the kernel with dynamic printk" via spacebar 5. Save and exit (arrow key to "Exit" until prompted to save, save) Alternatively, set "CONFIG_KERNEL_DYNAMIC_DEBUG=y" in your .config. Then, turn on dynamic debugging at boot: Modify bootargs in target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts to add… bootargs = "[…existing bootargs…] dyndbg=\"file drivers/mmc/* +p\" dynamic_debug.verbose=1 loglevel=8"; For example: chosen { - bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1"; + bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1 dyndbg=\"file drivers/mmc/* +p\" dynamic_debug.verbose=1 loglevel=8"; append-rootblock = "root=/dev/mmcblk0p"; Then, compile and flash the resulting build. If you are testing before this commit on newer MMC hardware, be prepared to recover! NOTE: If you have hardware serial console access, you don't need to use TFTP recovery to change the active boot partition. Reboot to working alternative partition via serial console: 1. Connect to hardware serial console * See https://openwrt.org/toh/zyxel/nbg6817#serial 2. Interrupt boot at "Hit any key to stop autoboot:" 3. Run "ATSE NBG6817" 4. Copy the result (e.g. "001976FE4B04") * Changes with **every boot** - can't reuse this 5. On your local system, run "./zyxel-uboot-password-tool.sh <copied value here>" * Example: "./zyxel-uboot-password-tool.sh 001976FE4B04" 6. Run the command provided by the password tool * Example: "ATEN 1,910F129B" * Changes with **every boot** - can't reuse this 7. Run "ATGU" * You now have full u-boot shell until next boot - unlocking is not remembered 8. Run either "run boot_mmc" (for booting partition set "FF") or "run boot_mmc_1" (for booting partition set "01") * These commands are not affected by dual-boot partition flags NOTE: This will NOT set the dual-boot partition flag. You'll need to fix that manually. The "nbg6817-dualboot" script may help: https://github.com/pkgadd/nbg6817/blob/master/nbg6817-dualboot zyxel-uboot-password-tool.sh - sourced from commit 459c8c9ef816156107e297964d088ddee2b4eef5: ror32() { echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) )) } v="0x$1" a="0x${v:2:6}" b=$(( a + 0x10F0A563)) c=$(( 0x${v:12:14} & 7 )) p=$(( $(ror32 $b $c) ^ a )) printf "ATEN 1,%X\n" $p Kernel serial console log BEFORE commit with dynamic debug enabled: […trimmed…] [ 3.171343] mmci-pl18x 12400000.sdcc: designer ID = 0x51 [ 3.171397] mmci-pl18x 12400000.sdcc: revision = 0x0 [ 3.175811] mmci-pl18x 12400000.sdcc: clocking block at 96000000 Hz [ 3.181134] mmci-pl18x 12400000.sdcc: No vqmmc regulator found [ 3.186788] mmci-pl18x 12400000.sdcc: mmc0: PL180 manf 51 rev0 at 0x12400000 irq 41,0 (pio) [ 3.192902] mmci-pl18x 12400000.sdcc: DMA channels RX dma1chan1, TX dma1chan2 [ 3.215609] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 1 timing 0 [ 3.227532] mmci-pl18x 12400000.sdcc: Initial signal voltage of 3.3v [ 3.247518] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0 […trimmed…] [ 3.997725] mmc0: req done (CMD2): -110: 00000000 00000000 00000000 00000000 [ 4.003631] mmci-pl18x 12400000.sdcc: irq0 (data+cmd) 00000000 [ 4.003659] mmc0: error -110 whilst initialising MMC card [ 4.016481] mmc0: clock 0Hz busmode 2 powermode 0 cs 0 Vdd 0 width 1 timing 0 Notice how the initial clock is 52 MHz, which is incorrect - MMC requires negotiation to enable higher speeds. Kernel serial console log AFTER commit with dynamic debug enabled: […trimmed…] [ 3.168996] mmci-pl18x 12400000.sdcc: designer ID = 0x51 [ 3.169051] mmci-pl18x 12400000.sdcc: revision = 0x0 [ 3.173492] mmci-pl18x 12400000.sdcc: clocking block at 96000000 Hz [ 3.178808] mmci-pl18x 12400000.sdcc: No vqmmc regulator found [ 3.184702] mmci-pl18x 12400000.sdcc: mmc0: PL180 manf 51 rev0 at 0x12400000 irq 41,0 (pio) [ 3.190573] mmci-pl18x 12400000.sdcc: DMA channels RX dma1chan1, TX dma1chan2 [ 3.217873] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 1 timing 0 [ 3.229250] mmci-pl18x 12400000.sdcc: Initial signal voltage of 3.3v [ 3.249111] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0 […trimmed…] [ 4.392652] mmci-pl18x 12400000.sdcc: irq0 (data+cmd) 00000000 [ 4.392785] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 1 [ 4.406554] mmc0: starting CMD6 arg 03b70201 flags 0000049d […trimmed…] Now, the MMC properly initializes and later switches to high speed. Thanks to: * Ansuel for maintaining/help with the IPQ806x platform, kernel code * slh for additional debugging and suggestions * dwfreed for confirming newer MMC details, clock frequency * robimarko for device driver debug printing help, clock debugging * Drake for testing and confirmation with their own newer NBG6817 ...and anyone else I missed! Signed-off-by: Shane Synan <digitalcircuit36939@gmail.com> Tested-by: Shane Synan <digitalcircuit36939@gmail.com>
* nat46: update to latest git HEADHans Dedecker2021-12-051-3/+3
| | | | | | | d9bc161 nat46-core: Fix typo since day one (#31) 840e235 Fix coverity issues observed so far (#30) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mediatek: enable bmt on mt7622-rfb1Felix Fietkau2021-12-041-0/+11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: bmt: use generic mtd apiChuanhong Guo2021-12-041-50/+57
| | | | | | | | | | | BMT replaces nand-specific ops for erasing and writing, but the mtk-snand driver only implements generic mtd api. Replace erase, block_isbad, block_markbad in mtd_info for generic mtd drivers. Fixes: b600aee3ed ("mediatek: attach bmt to the new snand driver") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* base-files: fix service_running checkFlorian Eckert2021-12-041-3/+3
| | | | | | | | | | | | | | | | | | The following command checks if a instance of a service is running. /etc/init.d/<service> running <instance> In the variable `$@`, which is passed to the function `service_running`, the first argument is always the `instance` which should be checked. Because all other variables where removed from `$@` with `shift`. Before this change the first argument of `$@` was set to the `$service` Variable. So the function does not work as expected. The `$service` variable was always the instance which should be checked. This is not what we want. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add support for ipTIME A3004NS-dualYuchan Seo2021-12-042-0/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ipTIME A3004NS-dual is a 2.4/5GHz band router, based on Mediatek MT7621. Specifications: - SoC: MT7621 (880MHz) - RAM: DDR3 256M - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: MT7602E - 5GHz : MT7612E - Ethernet: - 4x LAN - 1x WAN - USB: 1 * USB3.0 port - UART: - 3.3V, TX, RX, GND / 57600 8N1 Installation via web interface: - 1. Flash Initramfs image using OEM Firmware's web GUI - 2. Boot into OpenWrt and perform Sysupgrade with sysupgrade image. Revert to stock firmware: - 1. Boot into OpenWrt and perform Sysupgrade with OEM Stock Firmware image. Signed-off-by: Yuchan Seo <hexagonwin@disroot.org> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: add support for Ctera C200 V1 NASPawel Dembicki2021-12-046-1/+421
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2-Bay NAS - maximum two 3.5" Harddisks Hardware: - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz - Ram: 512MB (4x Nanya NT5TU128M8GE-AC) - NAND Flash: 256MB (Samsung 216 K9F2G08U0C) - Lan: 1x GBE (Marvell 88E1116R-NNC1) - Storage: 2x SATA HDD 3.5" Slot - USB: 2x USB 2.0 port - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND) - LEDs: 13x GPIO controlled - Buttons: 2x GPIO controlled Known issues: - Buzzer is unused due lack of proper driver Installation: - Apply factory initramfs image via stock web-gui. - Do sysupgrade to make installation complete. Back to stock: - OpenWrt rootfs partition use unused space after stock firmware. - Full revert is possible. - Login via ssh and run: ctera_c200-v1_back_to_factory Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run> [apply sorting to device recipe] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: fix tl-mr3020-v3 switch topology to configure vlans via luciSergey V. Lobanov2021-12-041-1/+4
| | | | | | | | | | Currently it is not possible to configure VLANs via LUCI on tplink tl-mr3020-v3. This patch fixes switch topology for the LUCI interface. Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in> [copied commit message from github PR] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: mt7620: Enable PHY aneg of Lava LR-25G001Pawel Dembicki2021-12-042-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | In 20b09a2125f5 Lava LR-25G001 router have problem with two inactive ethernet ports. JBOOT bootloader didn't configure ethernet devices by default. The same situation was there. It is required to enable all phy ports. This is fragment of stock bootlog: switch reg write_athr offset=90, value=2b0 switch reg write_athr offset=8c, value=2b0 switch reg write_athr offset=88, value=2b0 switch reg write_athr offset=84, value=2b0 switch reg write_athr offset=80, value=2b0 This patch adds proper registers configuration ar8337 initvals. 0x2b0 value causes force flow control configuration, 0x1200 was used instead (flow control config auto-neg with phy). [1] When switch is now ok, let's fix port numeration too. Fixes: 20b09a2125f5 ("ramips: add support for Lava LR-25G001") [1] https://github.com/openwrt/openwrt/pull/4806#issuecomment-982019858 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ipq40xx: nvmem cells for EZVIZ CS-W3-WD1200G EUPChristian Lamparter2021-12-043-6/+34
| | | | | | | | | | introduce nvmem pre-cal + mac-address cells for both Wifis and ethernet on the EZVIZ CS-W3-WD1200G EUP. This is one of the few devices in which the correct mac adress is already at the right place for Wifi, so no separate nvmem cell is needed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: unbreak EZVIZ CS-W3-WD1200G EUP on 5.10Christian Lamparter2021-12-042-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | with current images, the device is no longer booting. It gets stuck in the bootloader with "Config not available" and drops to the uboot shell. |flash_type: 0 |Hit any key to stop autoboot: 0 |SF: Detected MX25L12805D with page size 4 KiB, total 16 MiB |Config not availabale |(IPQ40xx) # This is because the default bootcmd "bootipq" will only read the first four MiB of the kernel image. With 5.10 the gzip'd kernel is slightly larger. So the part of the FIT image which had the configuration is cut off. Hence it can't find it. To update the bootcmd, you have to attach the serial console again and enter the following commands into the boot prompt: # setenv bootcmd "sf probe; sf read 84000000 180000 600000; bootm" # saveenv # run bootcmd This will allow booting kernels with up to six MiB. This also allows us to drop the DEVICE_DTS_CONFIG hack we had to use. Note: uboot doesn't support LZMA. It fails with: "Unimplemented compression type 3" Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gemini: only provide squashfs image for storlink-derivatesChristian Lamparter2021-12-041-0/+1
| | | | | | | | | The itian sq201, raidsonic ib-4220-b and storlink sl93512r can't boot from ext4. This is because the rootfstype in the device-tree bootargs is set to "squashfs,jffs2". (And ext4 was not designed for raw NOR flash chips). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: intel-microcode: update to 20210608Tan Zien2021-12-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | intel-microcode (3.20210608.2) * Correct INTEL-SA-00442 CVE id to CVE-2020-24489 in changelog and debian/changelog (3.20210608.1). intel-microcode (3.20210608.1) * New upstream microcode datafile 20210608 (closes: #989615) * Implements mitigations for CVE-2020-24511 CVE-2020-24512 (INTEL-SA-00464), information leakage through shared resources, and timing discrepancy sidechannels * Implements mitigations for CVE-2020-24513 (INTEL-SA-00465), Domain-bypass transient execution vulnerability in some Intel Atom Processors, affects Intel SGX. * Implements mitigations for CVE-2020-24489 (INTEL-SA-00442), Intel VT-d privilege escalation * Fixes critical errata on several processors * New Microcodes: sig 0x00050655, pf_mask 0xb7, 2018-11-16, rev 0x3000010, size 47104 sig 0x000606a5, pf_mask 0x87, 2021-03-08, rev 0xc0002f0, size 283648 sig 0x000606a6, pf_mask 0x87, 2021-04-25, rev 0xd0002a0, size 283648 sig 0x00080664, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048 sig 0x00080665, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048 sig 0x000806c1, pf_mask 0x80, 2021-03-31, rev 0x0088, size 109568 sig 0x000806c2, pf_mask 0xc2, 2021-04-07, rev 0x0016, size 94208 sig 0x000806d1, pf_mask 0xc2, 2021-04-23, rev 0x002c, size 99328 sig 0x00090661, pf_mask 0x01, 2021-02-04, rev 0x0011, size 19456 sig 0x000906c0, pf_mask 0x01, 2021-03-23, rev 0x001d, size 19456 sig 0x000a0671, pf_mask 0x02, 2021-04-11, rev 0x0040, size 100352 * Updated Microcodes: sig 0x000306f2, pf_mask 0x6f, 2021-01-27, rev 0x0046, size 34816 sig 0x000306f4, pf_mask 0x80, 2021-02-05, rev 0x0019, size 19456 sig 0x000406e3, pf_mask 0xc0, 2021-01-25, rev 0x00ea, size 105472 sig 0x000406f1, pf_mask 0xef, 2021-02-06, rev 0xb00003e, size 31744 sig 0x00050653, pf_mask 0x97, 2021-03-08, rev 0x100015b, size 34816 sig 0x00050654, pf_mask 0xb7, 2021-03-08, rev 0x2006b06, size 36864 sig 0x00050656, pf_mask 0xbf, 2021-03-08, rev 0x4003102, size 30720 sig 0x00050657, pf_mask 0xbf, 2021-03-08, rev 0x5003102, size 30720 sig 0x0005065b, pf_mask 0xbf, 2021-04-23, rev 0x7002302, size 27648 sig 0x00050663, pf_mask 0x10, 2021-02-04, rev 0x700001b, size 24576 sig 0x00050664, pf_mask 0x10, 2021-02-04, rev 0xf000019, size 24576 sig 0x00050665, pf_mask 0x10, 2021-02-04, rev 0xe000012, size 19456 sig 0x000506c9, pf_mask 0x03, 2020-10-23, rev 0x0044, size 17408 sig 0x000506ca, pf_mask 0x03, 2020-10-23, rev 0x0020, size 15360 sig 0x000506e3, pf_mask 0x36, 2021-01-25, rev 0x00ea, size 105472 sig 0x000506f1, pf_mask 0x01, 2020-10-23, rev 0x0034, size 11264 sig 0x000706a1, pf_mask 0x01, 2020-10-23, rev 0x0036, size 74752 sig 0x000706a8, pf_mask 0x01, 2020-10-23, rev 0x001a, size 75776 sig 0x000706e5, pf_mask 0x80, 2020-11-01, rev 0x00a6, size 110592 sig 0x000806a1, pf_mask 0x10, 2020-11-06, rev 0x002a, size 32768 sig 0x000806e9, pf_mask 0x10, 2021-01-05, rev 0x00ea, size 104448 sig 0x000806e9, pf_mask 0xc0, 2021-01-05, rev 0x00ea, size 104448 sig 0x000806ea, pf_mask 0xc0, 2021-01-06, rev 0x00ea, size 103424 sig 0x000806eb, pf_mask 0xd0, 2021-01-05, rev 0x00ea, size 104448 sig 0x000806ec, pf_mask 0x94, 2021-01-05, rev 0x00ea, size 104448 sig 0x000906e9, pf_mask 0x2a, 2021-01-05, rev 0x00ea, size 104448 sig 0x000906ea, pf_mask 0x22, 2021-01-05, rev 0x00ea, size 102400 sig 0x000906eb, pf_mask 0x02, 2021-01-05, rev 0x00ea, size 104448 sig 0x000906ec, pf_mask 0x22, 2021-01-05, rev 0x00ea, size 103424 sig 0x000906ed, pf_mask 0x22, 2021-01-05, rev 0x00ea, size 103424 sig 0x000a0652, pf_mask 0x20, 2021-02-07, rev 0x00ea, size 93184 sig 0x000a0653, pf_mask 0x22, 2021-03-08, rev 0x00ea, size 94208 sig 0x000a0655, pf_mask 0x22, 2021-03-08, rev 0x00ec, size 94208 sig 0x000a0660, pf_mask 0x80, 2020-12-08, rev 0x00e8, size 94208 sig 0x000a0661, pf_mask 0x80, 2021-02-07, rev 0x00ea, size 93184 * source: update symlinks to reflect id of the latest release, 20210608 intel-microcode (3.20210216.1) * New upstream microcode datafile 20210216 * Mitigates an issue on Skylake Server (H0/M0/U0), Xeon-D 21xx, and Cascade Lake Server (B0/B1) when using an active JTAG agent like In Target Probe (ITP), Direct Connect Interface (DCI) or a Baseboard Management Controller (BMC) to take the CPU JTAG/TAP out of reset and then returning it to reset. * This issue is related to the INTEL-SA-00381 mitigation. * Updated Microcodes: sig 0x00050654, pf_mask 0xb7, 2020-12-31, rev 0x2006a0a, size 36864 sig 0x00050656, pf_mask 0xbf, 2020-12-31, rev 0x4003006, size 53248 sig 0x00050657, pf_mask 0xbf, 2020-12-31, rev 0x5003006, size 53248 * source: update symlinks to reflect id of the latest release, 20210216 intel-microcode (3.20201118.1) * New upstream microcode datafile 20201118 * Removes a faulty microcode update from release 2020-11-10 for Tiger Lake processors. Note that Debian already had removed this specific falty microcode update on the 3.20201110.1 release * Add a microcode update for the Pentium Silver N/J5xxx and Celeron N/J4xxx which didn't make it to release 20201110, fixing security issues (INTEL-SA-00381, INTEL-SA-00389) * Updated Microcodes: sig 0x000706a1, pf_mask 0x01, 2020-06-09, rev 0x0034, size 74752 * Removed Microcodes: sig 0x000806c1, pf_mask 0x80, 2020-10-02, rev 0x0068, size 107520 intel-microcode (3.20201110.1) * New upstream microcode datafile 20201110 (closes: #974533) * Implements mitigation for CVE-2020-8696 and CVE-2020-8698, aka INTEL-SA-00381: AVX register information leakage; Fast-Forward store predictor information leakage * Implements mitigation for CVE-2020-8695, Intel SGX information disclosure via RAPL, aka INTEL-SA-00389 * Fixes critical errata on several processor models * Reintroduces SRBDS mitigations(CVE-2020-0543, INTEL-SA-00320) for Skylake-U/Y, Skylake Xeon E3 * New Microcodes sig 0x0005065b, pf_mask 0xbf, 2020-08-20, rev 0x700001e, size 27648 sig 0x000806a1, pf_mask 0x10, 2020-06-26, rev 0x0028, size 32768 sig 0x000806c1, pf_mask 0x80, 2020-10-02, rev 0x0068, size 107520 sig 0x000a0652, pf_mask 0x20, 2020-07-08, rev 0x00e0, size 93184 sig 0x000a0653, pf_mask 0x22, 2020-07-08, rev 0x00e0, size 94208 sig 0x000a0655, pf_mask 0x22, 2020-07-08, rev 0x00e0, size 93184 sig 0x000a0661, pf_mask 0x80, 2020-07-02, rev 0x00e0, size 93184 * Updated Microcodes sig 0x000306f2, pf_mask 0x6f, 2020-05-27, rev 0x0044, size 34816 sig 0x000406e3, pf_mask 0xc0, 2020-07-14, rev 0x00e2, size 105472 sig 0x00050653, pf_mask 0x97, 2020-06-18, rev 0x1000159, size 33792 sig 0x00050654, pf_mask 0xb7, 2020-06-16, rev 0x2006a08, size 35840 sig 0x00050656, pf_mask 0xbf, 2020-06-18, rev 0x4003003, size 52224 sig 0x00050657, pf_mask 0xbf, 2020-06-18, rev 0x5003003, size 52224 sig 0x000506c9, pf_mask 0x03, 2020-02-27, rev 0x0040, size 17408 sig 0x000506ca, pf_mask 0x03, 2020-02-27, rev 0x001e, size 15360 sig 0x000506e3, pf_mask 0x36, 2020-07-14, rev 0x00e2, size 105472 sig 0x000706a8, pf_mask 0x01, 2020-06-09, rev 0x0018, size 75776 sig 0x000706e5, pf_mask 0x80, 2020-07-30, rev 0x00a0, size 109568 sig 0x000806e9, pf_mask 0x10, 2020-05-27, rev 0x00de, size 104448 sig 0x000806e9, pf_mask 0xc0, 2020-05-27, rev 0x00de, size 104448 sig 0x000806ea, pf_mask 0xc0, 2020-06-17, rev 0x00e0, size 104448 sig 0x000806eb, pf_mask 0xd0, 2020-06-03, rev 0x00de, size 104448 sig 0x000806ec, pf_mask 0x94, 2020-05-18, rev 0x00de, size 104448 sig 0x000906e9, pf_mask 0x2a, 2020-05-26, rev 0x00de, size 104448 sig 0x000906ea, pf_mask 0x22, 2020-05-25, rev 0x00de, size 103424 sig 0x000906eb, pf_mask 0x02, 2020-05-25, rev 0x00de, size 104448 sig 0x000906ec, pf_mask 0x22, 2020-06-03, rev 0x00de, size 103424 sig 0x000906ed, pf_mask 0x22, 2020-05-24, rev 0x00de, size 103424 sig 0x000a0660, pf_mask 0x80, 2020-07-08, rev 0x00e0, size 94208 * 0x806c1: remove the new Tiger Lake update: causes hang on cold/warm boot https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/issues/44 INTEL-SA-00381 AND INTEL-SA-00389 MITIGATIONS ARE THEREFORE NOT INSTALLED FOR 0x806c1 TIGER LAKE PROCESSORS by this package update. Contact your system vendor for a firmware update, or wait fo a possible fix in a future Intel microcode release. * source: update symlinks to reflect id of the latest release, 20201110 * source: ship new upstream documentation (security.md, releasenote.md) Signed-off-by: Tan Zien <nabsdh9@gmail.com> [used different .tar.xz source, but with the same content] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mvebu: next backport mvnet MQPrio offloadKabuli Chana2021-12-034-0/+395
| | | | | | linux-next MQPrio patches adding TC traffic shaping offload Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* ath79: add Embedded Wireless Balin PlatformCatrinel Catrinescu2021-12-033-0/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | Add the Embedded Wireless "Balin" platform, it is in ar71xx too SoC: QCA AR9344 or AR9350 RAM: DDR2-RAM 64MBytes Flash: SPI-NOR 16MBytes WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n Ethernet: 3 x 10/100 Mb/s USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up PCIe: MiniPCIe - 1 x lane PCIe 1.2 Button: 1 x Reset-Button UART: 1 x Normal, 1 x High-Speed JTAG: 1 x EJTAG LED: 1 x Green Power/Status LED GPIO: 10 x Input/Output multiplexed The module comes already with the current vanilla OpenWrt firmware. To update, use "sysupgrade -n --force <image>" image directly in vendor firmware. This resets the existing configurations back to default! Signed-off-by: Catrinel Catrinescu <cc@80211.de> [indent, led function+color properties, fix partition unit-address, re-enable pcie port, mention button+led in commit message] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: sysupgrade: drop disabled UBI to UBI logicBjørn Mork2021-12-031-22/+2
| | | | | | | | | | | | | | | | The commented out code is not required, as the comment indicates. The purpose of this code seems to be to avoid issues caused by partially overwriting an existing UBI partition, where some of the erase counters would be reset but not the unmodified ones. This problem has been solved in a more generic way by the UBI EOF marker. This ensures that any old PEBs after the marker are properly initialized. It is therefore unnecessary to erase the whole partition before flashing a new OpenWrt factory image. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ipq806x: sysupgrade: drop unnecessary UBI to UBI logicBjørn Mork2021-12-031-17/+1
| | | | | | | | | | | | | The purpose of this code seems to be to avoid issues caused by partially overwriting an existing UBI partition, where some of the erase counters would be reset but not the unmodified ones. This problem has been solved in a more generic way by the UBI EOF marker. This ensures that any old PEBs after the marker are properly initialized. It is therefore unnecessary to erase the whole partition before flashing a new OpenWrt factory image. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* kirkwood: sysupgrade: drop unnecessary UBI to UBI logicBjørn Mork2021-12-031-18/+1
| | | | | | | | | | | | | The purpose of this code seems to be to avoid issues caused by partially overwriting an existing UBI partition, where some of the erase counters would be reset but not the unmodified ones. This problem has been solved in a more generic way by the UBI EOF marker. This ensures that any old PEBs after the marker are properly initialized. It is therefore unnecessary to erase the whole partition before flashing a new OpenWrt factory image. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* mvebu: sysupgrade: drop unnecessary UBI to UBI logicBjørn Mork2021-12-031-18/+1
| | | | | | | | | | | | | | | | | | The recent changes to the maximum kernel size for Mamba and Venom highlighted the fact that the old Mamba kernel size has been hardcoded in linksys_get_root_magic() even for devices with a different kernel/rootfs split. The purpose of this code seems to be to avoid issues caused by partially overwriting an existing UBI partition, where some of the erase counters would be reset but not the unmodified ones. This problem has been solved in a more generic way by the UBI EOF marker. This ensures that any old PEBs after the marker are properly initialized. It is therefore unnecessary to erase the whole partition before flashing a new OpenWrt factory image. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* mt76: update to the latest versionFelix Fietkau2021-12-031-3/+3
| | | | | | | | | 71e08471ab56 mt76: eeprom: fix return code on corrected bit-flips 9a8fc6636d83 mt76: move sar_capa configuration in common code 7cdbea1dc82a mt76: only access ieee80211_hdr after mt76_insert_ccmp_hdr 678071ef7029 mt76: mt7615: clear mcu error interrupt status on mt7663 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: mt7623: switch to BPi-R2 to generic eMMC sysugpradeDaniel Golle2021-12-021-16/+3
| | | | | | | Make use of new functions in emmc.sh to implement sysupgrade on the BananaPi BPi-R2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: switch to generic eMMC sysupgradeDaniel Golle2021-12-022-18/+5
| | | | | | | Use functions in newly introduced emmc.sh for sysupgrade of the BananaPi BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: add support for GL.iNet GL-B2200TruongSinh Tran-Nguyen2021-12-0212-2/+425
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for the GL-B2200 router. Specifications: - SOC: Qualcomm IPQ4019 ARM Quad-Core - RAM: 512 MiB - Flash: 16 MiB NOR - SPI0 - EMMC: 8GB EMMC - ETH: Qualcomm QCA8075 - WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11b/g/n 2x2 - WLAN2: Qualcomm Atheros QCA4019 5GHz 802.11n/ac W2 2x2 - WLAN3: Qualcomm Atheros QCA9886 5GHz 802.11n/ac W2 2x2 - INPUT: Reset, WPS - LED: Power, Internet - UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1 - UART2: On board with BLE module - SPI1: On board socket for Zigbee module Update firmware instructions: Please update the firmware via U-Boot web UI (by default at 192.168.1.1, following instructions found at https://docs.gl-inet.com/en/3/troubleshooting/debrick/). Normal sysupgrade, either via CLI or LuCI, is not possible from stock firmware. Please do use the *gl-b2200-squashfs-emmc.img file, gunzipping the produced *gl-b2200-squashfs-emmc.img.gz one first. What's working: - WiFi 2G, 5G - WPA2/WPA3 Not tested: - Bluetooth LE/Zigbee Credits goes to the original authors of this patch. V1->V2: - updates *arm-boot-add-dts-files.patch correctly (sorry, my mistake) - add uboot-envtools support V2->V3: - Li Zhang updated official patch to fix wrong MAC address on wlan0 (PCI) interface V3->V4: - wire up sysupgrade Signed-off-by: Li Zhang <li.zhang@gl-inet.com> [fix tab and trailing space, document what's working and what's not] Signed-off-by: TruongSinh Tran-Nguyen <i@truongsinh.pro> [rebase on top of master, address remaining comments] Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> [remove redundant check in platform.sh] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: add eMMC sysupgrade supportEnrico Mioso2021-12-024-0/+76
| | | | | | | | | | | | | | | | | | | | | | | | | Adds generic support for sysupgrading on eMMC-based devices. Provide function emmc_do_upgrade and emmc_copy_config to be used in /lib/upgrade/platform.sh instead of redundantly implementing the same logic over and over again. Similar to generic sysupgrade on NAND, use environment variables CI_KERNPART, CI_ROOTPART and newly introduce CI_DATAPART to indicate GPT partition names to be used. On devices with more than one MMC block device, CI_ROOTDEV can be used to specify the MMC device for partition name lookups. Also allow to select block devices directly using EMMC_KERN_DEV, EMMC_ROOT_DEV and EMMC_DATA_DEV, as using GPT partition names is not always an option (e.g. when forced to use MBR). To easily handle writing kernel and rootfs make use of sysupgrade.tar format convention which is also already used for generic NAND support. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> CC: Li Zhang <li.zhang@gl-inet.com> CC: TruongSinh Tran-Nguyen <i@truongsinh.pro>
* ipq40xx: add MikroTik LHGG-60ad outdoor 802.11ad (60GHz) dishAlexander Couzens2021-12-027-3/+286
| | | | | | | | | | | | | | | | | | | | | | | | | | | | LHGG-60ad is IPQ4019 + wil6210 based. Specification: - Qualcomm IPQ4019 (717 MHz) - 256 MB of RAM (DDR3L) - 16 MB (SPI NOR) of flash - 1x Gbit ethernet, 802.3af/at POE IN connected through AR8035. - WLAN: wil6210 802.11ad PCI card - No USB or SD card ports - UART disabled - 8x LEDs Biggest news is the wil6210 PCI card. Integration for its configuration and detection has already been taken care of when adding support for TP-Link Talon AD7200. However, signal quality is much lower than with stock firmware, so probably additional board-specific data has to be provided to the driver and is still missing at the moment. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [Fix Ethernet Interface] Signed-off-by: Nick Hainke <vincent@systemli.org>
* toolchain/gcc: fix build on MacOS arm64Sergey V. Lobanov2021-12-021-0/+49
| | | | | | | | | | | | | | | | Added patch for GCC to fix compilation issues on MacOS arm64 The original commit message from Przemysław Buczkowski: GCC: Patch for Apple Silicon compatibility This patch fixes a linker error occuring when compiling the cross-compiler on macOS and ARM64 architecture. Adapted from: https://github.com/richfelker/musl-cross-make/issues/116#issuecomment-823612404 Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
* tools/fakeroot: fix build on MacOS arm64Sergey V. Lobanov2021-12-021-0/+86
| | | | | | | | | Added patch for MacOS without 32 bit inodes support (__DARWIN_ONLY_64_BIT_INO_T is true) This patch based on discussion https://github.com/archmac/bootstrap/issues/4 Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
* mac80211: fix tx aggregation locking issueFelix Fietkau2021-12-021-0/+79
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix queue assignment of aggregation start requestsFelix Fietkau2021-12-021-0/+28
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-12-021-3/+3
| | | | | | | | | | | | | | | | | | | | | a6451fea5a3d mt76: mt7615: improve wmm index allocation 1911486414dc mt76: mt7915: improve wmm index allocation 7998a41d1321 mt76: clear sta powersave flag after notifying driver 664475574438 mt76: mt7603: introduce SAR support 5c0da39c940b mt76: mt7915: introduce SAR support 77fc6c439a32 mt76: mt7603: improve reliability of tx powersave filtering 094b3d800835 firmware: update mt7663 rebb firmware to 20200904171623 25237b19bcc1 mt76: eeprom: tolerate corrected bit-flips 1463cb4c6ac2 mt76: mt7921: fix boolreturn.cocci warning 586bad6020f7 mt76: mt7921: use correct iftype data on 6GHz cap init 8ec95c910425 mt76: mt7921s: fix bus hang with wrong privilege 688e30c7d854 firmware: update mt7921 firmware to version 20211014 6fad970893dd mt76: fix key pointer overwrite in mt7921s_write_txwi/mt7663_usb_sdio_write_txwi 95acf972750c mt76: fix 802.3 RX fail by hdr_trans 3f402b0cf6c0 mt76: mt7921s: fix possible kernel crash due to invalid Rx count 929a03a8d65d mt76: connac: fix last_chan configuration in mt76_connac_mcu_rate_txpower_band Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sunxi: update nanopi neo air that use brcmfmac43430a0Michel Promonet2021-12-021-1/+1
| | | | | | | | Update wifi firmware used for nanopi neo air, with cypress-firmware-43430-sdio there is no wifi detected, as brcmfmac-firmware-43430a0-sdio allow to acces to wifi. Signed-off-by: Michel Promonet <michel.promonet@free.fr>
* bcm4908: sysupgrade: refactor handling different firmware formatsRafał Miłecki2021-12-021-32/+76
| | | | | | | | | | This results in setting format specific data (format info, extract commands) in a single function. It should help maintaining sysupgrade code. This change has been tested on Asus GT-AC5300 and Netgear R8000P. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: sysupgrade: refactor handling different firmware formatsRafał Miłecki2021-12-021-165/+123
| | | | | | | | | | | | | | | | | | List of supported formats grew over time and implementation got a bit messy. There are multiple functions with format-specific parameters and commands. Refactor it by making platform_identify() setup all required info right after detecting firmware format. This simplifies formats handling in platform_other_check_image() and platform_do_upgrade() a lot. This has been tested on: 1. SmartRG SR400ac (TRX): non-NAND sysupgrade 2. Netgear R8000 (CHK): NAND aware and standard sysupgrade-s 3. D-Link DIR-885L (Seama): NAND aware and standard sysupgrade-s 4. Luxul XWR-3150 (LXL): NAND aware and standard sysupgrade-s Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: sysupgrade: simplify extracting image from Seama sealRafał Miłecki2021-12-021-15/+3
| | | | | | Use "oseama extract" which supports now writing to stdout. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: bump to the latest masterRafał Miłecki2021-12-021-3/+3
| | | | | | | | | | | | | | | 56e8e19 otrx: support TRX from stdin when extracting a37ccaf otrx: support unsorted partitions offsets 1fa145e otrx: extract shared code opening & parsing TRX format 0fbc135 oseama: support extracting entity to stdout 58c9d5d oseama: allow reading from stdin 4ecefda otrx: allow validating TRX from stdin cf01e69 otrx: avoid unneeded fseek() when calculating CRC32 fa35379 tplink-safeloader: add EAP225 v1 support f4d1263 build, cmake: switch OPENSSL_CRYPTO_LIBRARY -> OPENSSL_CRYPTO_LIBRARIES cd3f6ee build, cmake: add quotes for FW_UTIL variable arguments Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 07:20:16 +0000