aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: Add support for Ubiquiti NanoBeam AC Gen2Nick Hainke2020-11-187-1/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CPU: Atheros AR9342 rev 3 SoC RAM: 64 MB DDR2 Flash: 16 MB NOR SPI WLAN 2.4GHz: Atheros AR9342 v3 (ath9k) WLAN 5.0GHz: QCA988X Ports: 2x GbE Flashing procedure is identical to other ubnt devices. https://openwrt.org/toh/ubiquiti/common Flashing through factory firmware 1. Ensure firmware version v8.7.0 is installed. Up/downgrade to this exact version. 2. Patch fwupdate.real binary using `hexdump -Cv /bin/ubntbox | sed 's/14 40 fe 27/00 00 00 00/g' | \ hexdump -R > /tmp/fwupdate.real` 3. Make the patched fwupdate.real binary executable using `chmod +x /tmp/fwupdate.real` 4. Copy the squashfs factory image to /tmp on the device 5. Flash OpenWrt using `/tmp/fwupdate.real -m <squashfs-factory image>` 6. Wait for the device to reboot (copied from Ubiquiti NanoBeam AC and modified) To keep it consistent, we will add the gen1 variant to the nanobeam ac gen1. Signed-off-by: Nick Hainke <vincent@systemli.org>
* valgrind: Update to version 3.16.1Hauke Mehrtens2020-11-182-4/+4
| | | | | | | | | | | | No special changes, just get in sync with recent code. See here for the changelog: https://valgrind.org/docs/manual/dist.news.html The ipkg sizes changes as follows for mips 24kc : 3.15 : valgrind_3.15.0-2_mips_24kc.ipk 1450680 3.16.1 : valgrind_3.16.1-1_mips_24kc.ipk 1491954 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* strace: Update to version 5.9Hauke Mehrtens2020-11-181-2/+2
| | | | | | | | | | | | No special changes, just get in sync with recent code. See here for the changelog: https://github.com/strace/strace/releases/tag/v5.9 The ipkg sizes changes as follows for mips 24kc : 5.8 : strace_5.8-1_mips_24kc.ipk 271195 5.9 : strace_5.9-1_mips_24kc.ipk 278352 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iperf3: Update to version 3.9Hauke Mehrtens2020-11-181-2/+2
| | | | | | | | | | | | No special changes, just get in sync with recent code. See here for the changelog: http://software.es.net/iperf/news.html#iperf-3-9-released The ipkg sizes changes as follows for mips 24kc : 3.7 : iperf3_3.7-1_mips_24kc.ipk 39675 3.9 : iperf3_3.9-1_mips_24kc.ipk 41586 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ethtool: update to version 5.9Hans Dedecker2020-11-171-2/+2
| | | | | | | | The ipkg sizes changes as follows for mips 24kc : 5.8 : ethtool_5.8-1_mips_24kc.ipk 34930 5.9 : ethtool_5.9-1_mips_24kc.ipk 35241 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* base-files: fix backwards compatiblity of rc.common EXTRA_COMMANDSMatthias Schiffer2020-11-172-7/+8
| | | | | | | | | | | | | | Avoid needlessly breaking old initscripts that set EXTRA_COMMANDS. This will aid in debugging (as it simplifies reverting to an older version of a package) and unbreaks third-party feeds (and packages that maintain their OpenWrt initscripts as part of the software's repo instead of the OpenWrt feed like fastd). Without this, initscripts that set EXTRA_COMMANDS become completely unusable, as all default commands like start/stop cease working. Fixes: 1a69f50dc627 ("base-files: fix rc.common help alignment") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* hostapd: set validity interval for BSS TMRADavid Bauer2020-11-171-1/+1
| | | | | | | | | | | | This sets the validity interval for the BSS transition candidate list to the same value as the disassociation timer. Currently the value is always 0, which is the specification states is a reserved value. Also, wpa_supplicant and from the looks of it some Android implementations will outright ignore the candidate list in this case. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add support for static airtime policy configurationDobroslaw Kijowski2020-11-172-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add support for passing airtime_sta_weight into hostapd configuration. * Since that commit it is possible to configure station weights. Set higher value for larger airtime share, lower for smaller share. I have tested this functionality by modyfing /etc/config/wireless to: config wifi-device 'radio0' ... option airtime_mode '1' config wifi-iface 'default_radio0' ... list airtime_sta_weight '01:02:03:04:05:06 1024' Now, when the station associates with the access point it has been assigned a higher weight value. root@OpenWrt:~# cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan0/stations/01\:02\:03\:04\:05\:06/airtime RX: 12656 us TX: 10617 us Weight: 1024 Deficit: VO: -2075 us VI: 256 us BE: -206 us BK: 256 us [MAC address has been changed into a dummy one.] Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
* hostapd: fix per-BSS airtime configurationDobroslaw Kijowski2020-11-172-1/+3
| | | | | | | | airtime_mode is always parsed as an empty string since it hasn't been added into hostapd_common_add_device_config function. Fixes: e289f183 ("hostapd: add support for per-BSS airtime configuration") Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
* hostapd: ubus: add get_status methodDavid Bauer2020-11-171-0/+40
| | | | | | | This adds a new get_status method to a hostapd interface, which provides information about the current interface status. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: ubus: add VHT capabilities to client listDavid Bauer2020-11-171-0/+71
| | | | | | | This adds parsed VHT capability information to the hostapd get_clients method. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: ubus: add driver information to client listDavid Bauer2020-11-171-0/+24
| | | | | | | | This adds information from mac80211 to hostapd get_client ubus function. This way, TX as well as RX status information as well as the signal can be determined. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: fix variable shadowingDavid Bauer2020-11-171-0/+2
| | | | | | Fixes commit 838b412cb527 ("hostapd: add interworking support") Signed-off-by: David Bauer <mail@david-bauer.net>
* umdns: convert seccomp filter rules to OCI formatDaniel Golle2020-11-172-31/+42
| | | | | | | procd-seccomp switched to OCI-compliant seccomp parser instead of our (legacy, OpenWrt-specific) format. Convert ruleset to new format. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: drop legacy seccomp support, switch to OCI parsersDaniel Golle2020-11-171-3/+3
| | | | | | | | d8f36f5 seccomp: specifying architectures is optional d352e6e seccomp: switch to new OCI compliant parser c110405 trace: switch to OCI seccomp JSON output Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* wireguard-tools: fix category/description in menuconfigAlberto Bursi2020-11-171-2/+11
| | | | | | | | | | | | | | | | | | | | | wireguard-tools is trying to import the menuconfig section from the wireguard package, but since it's not anymore in the same makefile this seems to fail and wireguard-tools ends up in "extra packages" category instead with other odds and ends. Same for the description, it's trying to import it from the wireguard package but it fails so it only shows the line written in this makefile. remove the broken imports and add manually the entries and description they were supposed to load Fixes: ea980fb9c6de ("wireguard: bump to 20191226") Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com> [fix trailing whitespaces, add Fixes] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix missing ";;" in 11-ath10k-caldataAdrian Schmutzler2020-11-161-0/+1
| | | | | | | | | This adds a missing ";;" in the switch-case in 11-ath10k-caldata. Fixes: 4d36569b9cab ("ath79: fix ath10k caldata extraction on some D-Link DIR-842 C3 devices") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix ath10k caldata extraction on some D-Link DIR-842 C3 devicesPaul Fertser2020-11-161-2/+7
| | | | | | | | | | | | | | | | | | | According to forum threads [0][1] and a report on IRC by Doc-Saintly some of those boards have calibration data in a different place. Only one alternative location is known. Without proper board calibration data (board.bin having all 0xff bytes) ath10k firmware still tries to load but crashes on startup with a confusing error message. If you're applying this patch manually on your device do not forget to remove /lib/firmware/ath10k/pre-cal-pci-0000:00:00.0.bin and reboot to force caldata re-extraction. [0] https://forum.openwrt.org/t/support-for-d-link-dir842-rev-c3/41654 [1] https://forum.openwrt.org/t/d-link-dir-842-cant-access-firmware-upload-form/65454 Signed-off-by: Paul Fertser <fercerpav@gmail.com>
* kernel: remove mvsw61xx swconfig driverDENG Qingfang2020-11-165-1424/+2
| | | | | | | All targets that used mvsw61xx have switched to upstream mv88e6xxx DSA driver, so it can be removed. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* mediatek: fix mixed indent in DTS filesAdrian Schmutzler2020-11-165-141/+143
| | | | | | | | | mediatek frequently had mixed indent (tabs vs. spaces) in DTS files and DTS file kernel patches (probably due to careless copy/paste). The harmonizes these cases to tabs-only, as usual for DTS(I). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove default-state off for LEDsAdrian Schmutzler2020-11-169-23/+6
| | | | | | | | | default-state = "off" is default for LEDs, no need to specify it explicitly. https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: LS421DE: improve the HDD ledsDaniel González Cabanelas2020-11-161-2/+2
| | | | | | | Improve the HDD LEDs used for disk activity: - Use the trigger activity per ata channel Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* ramips: mt7621: fix Telco X1 GPIO switchesDENG Qingfang2020-11-161-1/+1
| | | | | | | The GPIO base of MT7621 GPIO 0~31 is 480 on kernel 5.4 Fix the GPIO numbering. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* odhcpd: update to latest git HEADHans Dedecker2020-11-151-4/+4
| | | | | | fb55e80 dhcpv6-ia : write statefile atomically Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dropbear: update to 2.81Hans Dedecker2020-11-154-9/+7
| | | | | | | | Update dropbear to latest stable 2.81; for the changes see https://matt.ucc.asn.au/dropbear/CHANGES Refresh patches Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* bcm27xx: add bit variant to redundant RaspberryPiPaul Spooren2020-11-151-2/+14
| | | | | | | | | | Both bcm2709 and bcm2710 firmware can run on the same RaspberryPi models, varying however in 32 and 64 Bit architectures. The model name alone does not include the architecture information, which becomes problematic if looking at a overview that only contains the names. By adding a variant it is possible to tell the architecture. Signed-off-by: Paul Spooren <mail@aparcar.org>
* wireguard-tools: drop the dependency on ip-{tiny,full}Rui Salvaterra2020-11-141-1/+1
| | | | | | | | | | | | BusyBox ip already provides the required functionality and is enabled by default in OpenWrt. This patch drops the ip dependency and makes the BusyBox ip required dependencies explicit, allowing for a significant image size reduction. openwrt-ath79-generic-ubnt_nanostation-loco-m-squashfs-sysupgrade.bin size: 4588354 bytes (with ip-tiny) 4457282 bytes (with BusyBox ip) Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* build: support cmake verbose for host buildsFelix Fietkau2020-11-141-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libjson-c: enable rpath for host builds to fix errors on recent macOSFelix Fietkau2020-11-141-0/+5
| | | | | | Same approach as on libubox Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/bc: use autoreconf to fix build failure on macOS with recent Xcode ↵Felix Fietkau2020-11-142-1/+3
| | | | | | versions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/libelf: use autoreconf to fix build failure on macOS with recent Xcode ↵Felix Fietkau2020-11-141-0/+4
| | | | | | versions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: detect broken make version on macOSFelix Fietkau2020-11-141-0/+6
| | | | | | | | | Apple ships a broken make version with the Xcode command line tools. Homebrew installs make as gmake by default in order to not collide with Apple's version. Exit with an error if the broken one is used accidentally Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/fakeroot: fix build on macOS with recent Xcode versionsFelix Fietkau2020-11-141-1/+21
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: try to find getopt in macOS homebrew's standard locationFelix Fietkau2020-11-141-1/+2
| | | | | | It is not symlinked to /usr/local/bin by default Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iproute2: update to 5.9Hans Dedecker2020-11-143-6/+6
| | | | | | | | | Update iproute2 to latest stable 5.9; for the changes see https://lwn.net/Articles/834755/ Refresh patches Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> Acked-by: Hauke Mehrtens <hauke@huake-m.de>
* ipq40xx: do not remove pci@40000000 for ap.dk04.1Adrian Schmutzler2020-11-131-6/+6
| | | | | | | | | | | | | | This pci@40000000 node from upstream was dropped when the device was converted from local DTS(I) files to kernel patches in [1] to ensure that change was purely cosmetic. However, the DK04.1 has a PCI-E slot by default, so let's keep (i.e. not remove) the kernel definition now. [1] c4beac9ea2e1 ("ipq40xx: use upstream DTS files for IPQ4019/AP-DK04.1") Suggested-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: 5.4: update and reorder patchesRobert Marko2020-11-1333-432/+423
| | | | | | | | | | | | | | A lot of patches are outdated versions of upstreamed patches and drivers. So lets pull in the upstreamed patches and reorder remaining ones. This drops the unnecessary 721-dts-ipq4019-add-ethernet-essedma-node.patch which adds nodes for not yet in OpenWrt IPQESS driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr> [do not touch 902-dts-ipq4019-ap-dk04.1.patch here] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: filter out more autogenerated kernel config optionsFelix Fietkau2020-11-133-7/+12
| | | | | | | Define wildcard patterns for filtering in target/linux/generic/config-filter Preparation for supporting newer kernels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/kconfig.pl: allow regex syntax in filtering out config entriesFelix Fietkau2020-11-131-2/+9
| | | | | | | This will be used to filter out some autogenerated config values from the kernel config files Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: rename mtdpart_get_master to mtd_get_masterFelix Fietkau2020-11-132-4/+4
| | | | | | Preparation for supporting newer kernels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: pass KBUILD_EXTRA_SYMBOLS with symvers files for kernel module packagesFelix Fietkau2020-11-132-10/+3
| | | | | | | This replaces the previous (deprecated) method of collecting symvers data in $(PKG_BUILD_DIR)/Module.symvers, which does not work on newer kernels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: ip17xx: use pr_warn instead of pr_warningFelix Fietkau2020-11-131-3/+3
| | | | | | Fixes build with newer kernels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove kmod-capiFelix Fietkau2020-11-131-20/+0
| | | | | | We don't package any driver that uses this module Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2020-11-131-3/+3
| | | | | | 4a41135750d9 system-linux: only overwrite dev->present state on check_state for simple devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* generic: platform/mikrotik: implement multi caldataThibaut VARÈNE2020-11-121-33/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MikroTik recently changed again the way they store wlan calibration data on devices. Prior to this change, ERD calibration data for all available radios was stored within a single identifier node ("tag" in RouterBoot parlance). Recent devices have been seen with calibration (and BDF) data stored in separate identifiers within LZOR packing for each radio: this patch addresses this by: 1) ensuring that both variants are properly supported, 2) preserving backward compatibility with existing data consumers, 3) allowing for more than 2 calibration blobs to be exposed via sysfs. Specifically, before this patch, the driver would provide a single sysfs file named /sys/firmware/mikrotik/hard_config/wlan_data that contained whatever calibration data found on the device's flash. After this patch, when executed on a device that uses the old style storage, this behavior is unchanged, but when executed on a device that uses new style storage (for either traditional "ERD" packing or "LZOR" packing), the driver replaces that single file with a folder containing one or more files each containing the data encoded within individual identifiers. As far as OpenWRT is concerned, this means that for devices which are known to exist with both styles of data storage, a suitable hotplug stub could look like this for e.g. the second radio: wdata="/sys/firmware/mikrotik/hard_config/wlan_data" ( [ -f "$wdata" ] && caldata_sysfsload_from_file "$wdata" 0x8000 0x2f20 ) || \ ( [ -d "$wdata" ] && caldata_sysfsload_from_file "$wdata/data_2" 0x0 0x2f20 ) This patch has been tested with LZOR old and new style packing on ipq4019, and with old style on ath79. Tested-by: John Thomson <git@johnthomson.fastmail.com.au> Tested-by: Шебанов Алексей <admin@ublaze.ru> Tested-by: Alen Opačić <subixonfire@gmail.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Tested-by: Robert Marko <robimarko@gmail.com>
* libnetfilter-log: Backport kernel header syncsBrett Mastbergen2020-11-123-1/+161
| | | | | | | | | | | | Backport upstream commits that sync the local kernel header copies in this library, with up to date copies. These updated headers ensure that libnetfilter-log users can use current kernel functionality such as requesting that conntrack information be appended to nflog events sent to userspace via the NFULNL_CFG_F_CONNTRACK flag. This functionality has been available since kernel version 4.4 Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* scripts: add spelling.txt for checkpatch.plPaul Spooren2020-11-121-0/+1517
| | | | | | | | | | | | | | | | | | | | | | Running the updated checkpatch version with spelling.txt show that spelling mistakes happen to everyone. > /target/linux$ fd .*.patch | xargs ../../scripts/checkpatch.pl | rg spell WARNING: 'usefull' may be misspelled - perhaps 'useful'? WARNING: 'afecting' may be misspelled - perhaps 'affecting'? WARNING: 'usefull' may be misspelled - perhaps 'useful'? WARNING: 'afecting' may be misspelled - perhaps 'affecting'? WARNING: 'begining' may be misspelled - perhaps 'beginning'? WARNING: 'superflous' may be misspelled - perhaps 'superfluous'? WARNING: 'multipe' may be misspelled - perhaps 'multiple'? WARNING: 'recieves' may be misspelled - perhaps 'receives'? WARNING: 'retreive' may be misspelled - perhaps 'retrieve'? WARNING: 'tranfer' may be misspelled - perhaps 'transfer'? WARNING: 'additonal' may be misspelled - perhaps 'additional'? WARNING: 'accomodate' may be misspelled - perhaps 'accommodate'? [...] Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: checkpatch remove device-tree doc checkPaul Spooren2020-11-121-47/+0
| | | | | | | Remove checks for device tree documentation as the OpenWrt tree comes withouth the ./Documentation folder. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: Update checkpatch.pl to 2020-06-11Paul Spooren2020-11-121-567/+3995
| | | | | | | | Checkpatch grown in functionallity and we should make use of that. If OpenWrt patches should be upstream material they should also be checked based on upstream checkpatch.pl instead of 2013. Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: generic: disable CONFIG_EFI_VARS Alberto Bursi2020-11-121-1/+1
| | | | | | | | | | | | | | | | | | | CONFIG_EFI_VARS has been disabled in 64bit x86 target in 2018 by the following commit b0a51dab8c5b8d40828a00b0c6d66450bf90f217 the same reasons apply to Generic target, so now it's disabled here too. Leaving it enabled is also blocking compile as a new symbol was added EFI_CUSTOM_SSDT_OVERLAYS that depends from CONFIG_EFI_VARS and the build system stops and waits for user input on what to do about it. The Legacy and Geode targets never had any EFI_xxx configs enabled so they don't have this issue Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 11:53:54 +0000