aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* strace: fix build on aarch64Stijn Tintel2018-09-051-0/+4
| | | | | | | | | | | | As of version 4.21, strace enforces mpers by default. The current implementation of aarch64 compat in strace assumes it's identical to ARMv7 EABI and therefore tries to enable m32 personality support. As there is no -m32 support on aarch64, this causes the build to fail. Restore previous strace behavior to fix build on aarch64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Tested-by: Karl Palsson <karlp@tweak.net.au>
* odhcpd: bump to git HEAD (detect broken hostnames)Hans Dedecker2018-09-051-4/+4
| | | | | | | 881f66b odhcpd: detect broken hostnames 3e17fd9 config: fix odhcpd_attrs array size Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* imx6: use BUILD_DEVICES in uboot-imx6 for mx6cuboxiFelix Fietkau2018-09-052-1/+3
| | | | | | Fixes build with the default profile Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: rename Generic profile to Default, fixes u-boot image build issueFelix Fietkau2018-09-051-4/+4
| | | | | | | u-boot.mk checks for the Default profile to build images for all targets. This brings the target default profile in sync with other targets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wireguard: bump to 0.0.20180904Jason A. Donenfeld2018-09-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Kconfig: use new-style help marker * global: run through clang-format * uapi: reformat * global: satisfy check_patch.pl errors * global: prefer sizeof(*pointer) when possible * global: always find OOM unlikely Tons of style cleanups. * crypto: use unaligned helpers We now avoid unaligned accesses for generic users of the crypto API. * crypto: import zinc More style cleanups and a rearrangement of the crypto routines to fit how this is going to work upstream. This required some fairly big changes to our build system, so there may be some build errors we'll have to address in subsequent snapshots. * compat: rng_is_initialized made it into 4.19 We therefore don't need it in the compat layer anymore. * curve25519-hacl64: use formally verified C for comparisons The previous code had been proved in Z3, but this new code from upstream KreMLin is directly generated from the F*, which is preferable. The assembly generated is identical. * curve25519-x86_64: let the compiler decide when/how to load constants Small performance boost. * curve25519-arm: reformat * curve25519-arm: cleanups from lkml * curve25519-arm: add spaces after commas * curve25519-arm: use ordinary prolog and epilogue * curve25519-arm: do not waste 32 bytes of stack * curve25519-arm: prefix immediates with # This incorporates ASM nits from upstream review. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* mpc85xx: add migration script for TP-Link TL-WDR4900 v1 WLAN PCI pathsMatthias Schiffer2018-09-041-0/+63
| | | | | | | | | | PCI paths of the WLAN devices have changed between kernel 4.4 and 4.9; migrate config so existing wifi-iface definitions don't break. This is implemented as a hotplug handler rather than a uci-defaults script as the migration script must run before the 10-wifi-detect hotplug handler. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* hostapd: fix build of wpa-supplicant-p2pAlexander Couzens2018-09-031-0/+1
| | | | | | | VARIANT:= got removed by accident. Fixes: 3838b16943c6 ("hostapd: fix conflicts hell") Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* imx6: extend cubox support to hummingboard, add support for building full imagesFelix Fietkau2018-09-033-12/+54
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: enable f2fs and loopback support in preparation for squashfs with ↵Felix Fietkau2018-09-032-1/+8
| | | | | | overlay support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add support for enabling the rootfs/boot partition size option via ↵Felix Fietkau2018-09-033-2/+10
| | | | | | target feature Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-imx6: fall back to MMC for SPL if boot mode is invalidFelix Fietkau2018-09-031-0/+26
| | | | | | Fixes boot on Hummingboard Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-imx6: remove obsolete patchFelix Fietkau2018-09-031-87/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-imx6: install images into STAGING_DIR_IMAGEFelix Fietkau2018-09-031-0/+7
| | | | | | Will be used by a new combined image for cubox Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: ethernet: unify tx descriptor buffer splittingFelix Fietkau2018-09-031-75/+83
| | | | | | | | A buffer is split into multiple descriptors if it exceeds 16 KB. Apply the same split for the skb head as well (to deal with corner cases on fraglist support) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* nghttp2: bump to 1.33.0Hans Dedecker2018-09-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 9d843334 Update bash_completion 23cb3f38 Update manual pages 1d682dcd Bump up version number to 1.33.0, LT revision to 31:0:17 601fbbb4 Update doc f44aa246 Update AUTHORS dd74a6dd Update manual pages e959e733 src: Refactor utos fb9a204d nghttpx: Fix compile error without mruby cd096802 Update doc 7417fd71 nghttpx: Per-pattern not per-backend 2d1a981c Merge branch 'akonskarm-master' 45acc922 clang-format 214d0899 Merge branch 'master' of https://github.com/akonskarm/nghttp2 into akonskarm-master 31fd707d nghttpx: Fix broken healthmon frontend 9a2e38e0 fix code for reuse addr on asio client d24527e7 Bump up LT revision due to v1.32.1 release 6195d747 nghttpx: Share mruby context if it is compiled from same file fb97f596 nghttpx: Allocate mruby file because fopen requires NULL terminated string 0ccc7a77 nghttpx: Move blocked request data to request buffer for API request 32826466 nghttpx: Fix crash with API request 0422f8a8 nghttpx: Fix worker process crash with neverbleed write error e329479a Merge pull request #1215 from nghttp2/mruby-per-backend f80a7873 Merge branch 'akonskarm-reuse_addr' 866ac6ab add option reuse addr in local endpoint configuration of asio client b574ae6a nghttpx: Support per-backend mruby script de4fd7cd doc: Update doc 32d7883c nghttpx: Downstream::request_buf_full: take into account blocked_request_buf_ 9b24e197 nghttpx: Choose h1 protocol if headers have been sent to backend on retry 13ffece1 Merge pull request #1214 from nghttp2/fix-rst-without-dconn 9d5b781d Fix stream reset if data from client is arrived before dconn is attached Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* iproute2: update cake man pageKevin Darbyshire-Bryant2018-08-312-3/+81
| | | | | | | | | | | CAKE supports overriding of its internal classification of packets through the tc filter mechanism. Update the man page in our package, even though we don't build them. Someone may find the documentation useful. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 30598a05385b0ac2380dd4f30037a9f9d0318cf2)
* kmod-sched-cake: bump to 20180827Kevin Darbyshire-Bryant2018-08-311-3/+3
| | | | | | | Expand filter flow mapping to include hosts as well Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit d14ffdc307d36bd9abe908b46ff7baece54c9551)
* ppp: remove hardcoded lcp-echo-failure, lcp-echo-interval valuesJo-Philipp Wich2018-08-302-2/+2
| | | | | | | | | | | | | | | | | | | | | | OpenWrt used to ship hardcoded defaults for lcp-echo-failure and lcp-echo-interval in the non-uci /etc/ppp/options file. These values break uci support for *disabling* LCP echos through the use of "option keepalive 0" as either omitting the keepalive option or setting it to 0 will result in no lcp-echo-* flags getting passed to the pppd cmdline, causing the pppd process to revert to the defaults in /etc/ppp/options. Address this issue by letting the uci "keepalive" option default to the former hardcoded values "5, 1" and by removing the fixed lcp-echo-failure and lcp-echo-interval settings from the /etc/ppp/options files. Ref: https://github.com/openwrt/luci/issues/2112 Ref: https://dev.archive.openwrt.org/ticket/2373.html Ref: https://bugs.openwrt.org/index.php?do=details&task_id=854 Ref: https://bugs.openwrt.org/index.php?do=details&task_id=1259 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "ramips: mmc: Fix init for MT7628AN"Jo-Philipp Wich2018-08-302-16/+1
| | | | | | | | | | This reverts commit 3a8efaef00d6b7317c46fe6b7e923912d8bf3500. The change reportedly breaks UART2 on some boards. Furthermore it uses bitwise logic on an uninitialized variable and fails to explain what it is fixing exactly. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: only limit lzma dictionary size on mt7621Jo-Philipp Wich2018-08-302-1/+2
| | | | | | | | | | | | | The changed dictionary size leads to a different LZMA header which breaks sysupgrade image magic checkibng on at least some RT288x boards. Since the commit message only mentions testing on MT7621 and since the change appears to break at least one other ramips subtarget, do not take any chances and restrict the size limitation to only MT7621. Fixes FS#1797 Fixes 09b6755946 ("ramips: limit dictionary size for lzma compression") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix rt3883 pinmux for second SPIMathias Kresin2018-08-291-2/+2
| | | | | | | The rt3883 doesn't have a pinmux group named spi_cs1. The cs1 is part of the pci group. The function pci-func enables the second chip select. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix rt3883 pci pinmuxMathias Kresin2018-08-291-1/+1
| | | | | | | | | | The PCI pins need to be set to "PCI Host support one device" to allow the use of one PCI device and flash memory. The pci-fnc function is intended to be used if no PCI is used but flash, nand or the codec functionality is. Signed-off-by: Mathias Kresin <dev@kresin.me>
* scripts: bundle-libraries: fix logic flawJo-Philipp Wich2018-08-291-7/+6
| | | | | | | | | | | Previous refactoring of the script moved the LDSO detection into a file-not-exists condition, causing onyl the very first executable to get bundled. Solve the problem by unconditionally checking for LDSO again. Fixes: 9030a78a71 ("scripts: bundle-libraries: prevent loading host locales") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uqmi: wait for the control device tooThomas Equeter2018-08-291-2/+2
| | | | | | | | | | | | | | | | The control device /dev/cdc-wdm0 is not available immediately on the D-Link DWR-921 Rev.C3, therefore the wwan interface fails to start at boot with a "The specified control device does not exist" error. This patch alters /lib/netifd/proto/qmi.sh to wait for network.wwan.delay earlier, before checking for the control device, instead of just before interacting with the modem. One still has to use network.wwan.proto='qmi', as the "wwan" proto performs that sort of check before any delay is possible, failing with a "No valid device was found" error. Signed-off-by: Thomas Equeter <tequeter@users.noreply.github.com>
* apm821xx: MBL: load kernel/dtb from SATA 0:1 firstFreddy Leitner2018-08-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | This remedies an issue with the MBL Duo if both disks are inserted and contain OpenWrt. kernel and dtb would be loaded from SATA 1:1 while rootfs (/dev/sda2) would be mounted on SATA 0:1. Such a mix&match would obviously only work if both OpenWrt versions/ builds are identical, and especially fail after sysupgrade upgraded the system disk on SATA 0:1. The fallback to SATA 1:1 needs to be kept for MBL Single (only has SATA 1:1) and MBL Duo with one disk inserted on SATA 1:1. To speed up booting in those cases, the unneccesarily doubled "sata init" will only be called once. (In theory it could be omitted completely since the on-flash boot script already initializes SATA to load the on-disk boot script.) Tested on MBL Duo (all possible combination of disks) and MBL Single Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Freddy Leitner <hello@square.wf>
* ramips: drop pointless default led definitionsMathias Kresin2018-08-291-17/+0
| | | | | | | | | | | | | | | | The LEDs should be triggered/lit by any kind of state change instead of turned on/off unconditional. If LEDs really need to be turned off by default, it should be done via the default-state devicetree led property. The handling of the wndr3700v5 and wt3020 power led is at least strange. Something is for sure wrong with them. Either the leds are misnamed, the default off trigger is a typo or the polarity of the gpios is wrong. Drop the power led from userspace and wait for someone with access to the hardware to fix it properly. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add missing zbt-cpe102 diag ledMathias Kresin2018-08-291-1/+6
| | | | | | | Based on the userspace led configuration it's quite obvious that the 4g-0 led should be used for boot status indication. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: express diag led handling via devicetreeMathias Kresin2018-08-296-9/+12
| | | | | | | Use the default-state property to express the desired led handling in the devicetree source file instead of the userspace. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: remove default on userspace trigger for diag ledsMathias Kresin2018-08-291-34/+0
| | | | | | | All the LEDs are turned on by diag.sh at the end of the boot process. No need to do the same via userspace configuration again. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix multi colour led handlingMathias Kresin2018-08-295-13/+14
| | | | | | | | All boards either have a multi colour led or a single lightpipe. It makes it impossible to handle the LEDs individual. Change the LED config for these boards to take it into account. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: rt-n12p: use the boardname helper variableMathias Kresin2018-08-291-4/+4
| | | | | | | Use the helper variable for the Asus RT-N12P as it is done by all boards. Signed-off-by: Mathias Kresin <dev@kresin.me>
* comgt: increase timeout on runcommandsGiuseppe Lippolis2018-08-291-1/+1
| | | | | | | | | Some combination of modem/wireless operator requires more time to execute the commands. Tested on DWR-512 embedded wwan modem and italian operator iliad (new virtual operator). Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* base-files: provide more tolerant xterm detectionPaul Wassi2018-08-291-1/+5
| | | | | | | | Set the window title not only in "xterm", but also in e.g. "xterm-256color", "xterm-color", etc. The case statement is taken from Debian / Ubuntu. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ugps: Update to fix position calculationBruno Randolf2018-08-291-3/+3
| | | | | | | This is necessary to get my position right. Without this my longitude is incorrecty -15.85xxxx instead of -16.52yyyy Signed-off-by: Bruno Randolf <br1@einfach.org>
* ugps: Add option disabledBruno Randolf2018-08-292-0/+4
| | | | | | Like many other packages, an option to disable can be practical. Signed-off-by: Bruno Randolf <br1@einfach.org>
* kernel: bump 4.14 to 4.14.67Koen Vandeputte2018-08-2818-66/+38
| | | | | | | | | | | | Refreshed all patches. Removed upstreamed patches: - 037-v4.18-0008-ARM-dts-BCM5301x-Fix-i2c-controller-interrupt-type.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.124Koen Vandeputte2018-08-2812-19/+19
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mediatek: remove duplicate RPS patchKoen Vandeputte2018-08-281-90/+0
| | | | | | | | | | | | | | | Commit 7af1fb9faafb ("kernel: add a RPS balancer") introduces a RPS balancer for all targets. In the past however, this patch was already introduced for target "mediatek" in commit 7762c07c8898 ("mediatek: bump to v4.14") Remove the separate copy of the patch within the mediatek target, which otherwise is applied twice and results in a build error. Fixes: 7af1fb9faafb ("kernel: add a RPS balancer") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ethtool: Update to 4.18Robert Marko2018-08-281-2/+2
| | | | | | | | | | | Tested on 8devices Jalapeno(ipq40xx) Introduces following changes: Feature: Add support for WAKE_FILTER (WoL using filters) Feature: Add support for action value -2 (wake-up filter) Fix: document WoL filters option also in help message Feature: ixgbe dump strings for security registers Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath79: fix remove irq code from pci driver patchJohn Crispin2018-08-281-0/+141
| | | | | | This patch got mangled in the void while rebasing it. Signed-off-by: John Crispin <john@phrozen.org>
* generic: add flow_offload accountingJohn Crispin2018-08-281-0/+70
| | | | | | | This patch makes the flow offloading layer account for the traffic inside the conntack entries. Signed-off-by: John Crispin <john@phrozen.org>
* kernel: add a RPS balancerJohn Crispin2018-08-281-0/+93
| | | | | | | | | By default the RPS delegation will happen by masking the last few bits of skb->hash. This patch adds an inermediate hash bucket that maps the masked hash to a RPS core. This makes RPS results much more deterministic on SMP systems. Signed-off-by: John Crispin <john@phrozen.org>
* build: add mkrasimageDavid Bauer2018-08-287-208/+480
| | | | | | | | | | | | | | | The current make-ras.sh image generation script for the ZyXEL NBG6617 has portability issues with bash. Because of this, factory images are currently not built correctly by the OpenWRT buildbots. This commit replaces the make-ras.sh by C-written mkrasimage. The new mkrasimage is also compatible with other ZyXEL devices using the ras image-format. This is not tested with the NBG6616 but it correctly builds the header for ZyXEL factory image. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: fix ar7100 PCI IRQ handlingDmitry Tunin2018-08-282-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently all PCI devices get the same IRQ that affects performance badly. This commit adresses this problem and cleans the code. ar7100 has a special PCI interrupt controller@18060018 that works exactly the same way as misc interrupt controller. This patch does the following: 1. Defines pci-intc interrupt controller@18060018 in dtsi. 2. Removes interrupt-controller property from PCI node. 3. Sets a correct interrupt mask for PCI devices. 4. Removes all IRQ handling code from the PCI driver. "qca,ar7100-misc-intc" should be used as the compatible property, becuase on ar7100 the controlled status register is read-only and the ack method used in "qca,ar7240-misc-intc" won't work properly. There are two very minor downsides of this patch that don't affect perormance: 1. We allocate an IRQ domain of 32 IRQ, whan we need only 5. But ar7100 aren't tiny un terms of RAM and that is not very important and can be tuned if we implement "nr-interrupts" property". 2. It reuses the same irg chip name "MISC" for both controllers. Run tested on DIR-825 B1. Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
* ath79: ag71xx: apply interface mode to MII0/1_CTRL on ar71xx/ar913xChuanhong Guo2018-08-284-0/+73
| | | | | | | | | | | | | We currently don't have any code configuring interface mode in ath79, meaning that we relies on bootloader to set the correct interface mode. This patch added code to set interface correctly so that everything works even if bootloader configures it wrong.(e.g. on WNDR3800 u-boot set the second GMAC mode to RMII but it should be RGMII.) Introduced "qca,mac-idx" for the difference in MII_CTRL register value. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: replace patchesJohn Crispin2018-08-2835-1322/+1332
| | | | | | | replace our downstream version of the patches with the ones that were sent upstream. Signed-off-by: John Crispin <john@phrozen.org>
* strace: update strace to version 4.24Hauke Mehrtens2018-08-282-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: WNR612v2: fix kernel panic due to wrong Wifi LED initMichal Cieslakiewicz2018-08-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear WNR612v2 flashed with recent OpenWrt builds suffers from kernel panic at boot during wireless chip initialization, making device unusable: ath: phy0: Ignoring endianness difference in EEPROM magic bytes. ath: phy0: Enable LNA combining CPU 0 Unable to handle kernel paging request at virtual address 1000fee1, epc == 801d08f0, ra == 801d0d90 Oops[#1]: CPU: 0 PID: 469 Comm: kmodloader Not tainted 4.9.120 #0 [ ... register dump etc ... ] Kernel panic - not syncing: Fatal exception Rebooting in 1 seconds.. This simple patch fixes above error. It keeps LED table in memory after kernel init phase for ath9k driver to operate correctly (__initdata removed). Also, another bug is fixed - correct array size is provided to function that adds platform LEDs (this device has only 1 connected to Wifi chip) preventing code from going outside array bounds. Fixes: 1f5ea4eae46e ("ar71xx: add correct named default wireless led by using platform leds") Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> [trimmed commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx/generic: enable Zyxel NBG6616 in kernel config againMatthias Schiffer2018-08-271-0/+1
| | | | | | | | The NBG6616 shares a config symbol with the NBG6716. It was accidentally removed from the config when the ar71xx-tiny target was split off. Fixes: 0cd5e85e7ad6 ("ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ath79: initial support for Ubiquiti RouterStation and RouterStation ProMatt Merhar2018-08-277-0/+223
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a shared ar7161_ubnt_routerstation.dtsi as well as two other .dts files that utilize it, ar7161_ubnt_routerstation.dts and ar7161_ubnt_routerstation-pro.dts. The modifications to generic-ubnt.mk, config-default, and base-files necessary for image generation, parsing RedBoot FIS partitions, network configuration, and sysupgrade are also included. This reintroduces vital bits from platform_do_upgrade_combined() and its supporting functions to /lib/upgrade/platform.sh, which were previously removed from ath79 in 3e9d9f62258f80298710441e0db557e59e152dcf "ath79: sysupgrade: drop unused platform checks". The new function is called "routerstation_do_upgrade" and will *only* work for the RouterStation series of boards. It does however retain the ability to downgrade (e.g. from master -> 17.01.x using sysupgrade -F). All hardware is functional including the AR8216 switch (for the Pro), wireless via ath5k/ath9k using the miniPCI slots, flash, USB, button, and LED. Switch and LAN/WAN configuration is the same as it is with the equivalent ar71xx targets. MAC addresses are assigned based upon the content stored in the RedBoot config partition. Flashing via both sysupgrade and TFTP has been confirmed to work. Also, the initramfs images are now raw .bin files instead of being wrapped in a uImage (as they currently are in ar71xx), which makes them bootable with RedBoot. One notable difference to ar71xx is the inclusion of the RedBoot "fconfig" utility (analogous to U-Boot’s fw_printenv/fw_setenv) in DEVICE_PACKAGES. The FIS partitions are probed using the RedBoot MTD parser’s DT binding, whose proper usage is mutually exclusive to defining a separate fixed-partitions node for "RedBoot config". This config partition contains the board's base MAC address. The lack of a hard-coded flash location means that the mtd-mac-address property cannot be used in the .dts, so instead fconfig is used to read the MAC addresses from flash in userspace during first boot. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 13:40:32 +0000