aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* uboot-imx6: define 'BUILD_DEVICES' for Toradex ApalisPiotr Dymacz2021-04-101-0/+1
| | | | | | | Without 'BUILD_DEVICES' defined, the U-Boot related package won't be automatically selected when building for Toradex Apalis device. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx6: align indent size in MakefilePiotr Dymacz2021-04-101-5/+5
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx6: drop support for Nitrogen6x/SABRE devicesPiotr Dymacz2021-04-101-35/+0
| | | | | | | | | | | These devices never got officially supported in the tree thus it doesn't make much sense to waste our infrastructure resources and keep building dedicated U-Boot images for them. CC: Petr Štetiar <ynezz@true.cz> CC: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Acked-by: Petr Štetiar <ynezz@true.cz>
* mediatek: add alternative bootchain variant for UniFi 6 LRDaniel Golle2021-04-095-289/+386
| | | | | | | | Builds images for the Ubiquiti Network UniFi 6 LR device running the U-Boot build added by the previous commits. Everything but MTD partitions is moved to dtsi. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: add env settings for ubnt,unifi-6-lr-ubootmodDaniel Golle2021-04-091-2/+5
| | | | | | | | | Add settings for fw_printenv/fw_setenv for the Ubiquiti UniFi 6 LR when running OpenWrt's version of U-Boot. The settings should work equally with the unmodified version, but that has not yet been tested. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: add build for Ubiquiti Networks UniFi 6 LRDaniel Golle2021-04-094-7/+485
| | | | | | | | | | | | | | | | Add U-Boot build for the Ubiquiti Networks UniFi 6 LR access point. This allows updating the bootchain to modern ARM Trusted Firmware 2.4 and U-Boot 2021.04 while keeping as much of the existing flash layout as possible (u-boot-env, factory and eeprom partitions are retained), gaining robust recovery vs. production dual-boot mechanism. Add info for the Winbond W25Q512JV SPI NOR flash used in the device and wait for GPIOs to settle after reset before checking for reset button. I2C connected LED controller is not supported yet. Writing large amounts of data to SPI flash currently doesn't work due to watchdog timeout causing reset before data write completes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: increase NOR bl3 sizeDaniel Golle2021-04-091-0/+11
| | | | | | | | Use bl3 size of 0xa0000 instead of 0x80000 in NOR flash. This results in bl3 ending at 0xc0000 which is where the legacy bootchain typically puts U-Boot environment. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: support FIT partition parser on mtdblock devicesDaniel Golle2021-04-094-12/+241
| | | | | | | | | | | | | | | Allow using the FIT block-device partition partition parser to work on top of mtdblock devices. This is more tricky than it sounds as it requires to reorganize the procedure of registering mtdblock devices in order to avoid locking troubles caused by the block partition parsers then trying to open the mtdblock device for reading while locks are still being held. Fix that by moving the adding of the disks after the entire device has been probed when locks no longer need to be held. Also address issue with mtdsuper surfaced when using sub-partitions which prevented mounting JFFS2 using the /dev/mtdblock* device. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: mtdsplit_fit: support FIT with external dataDaniel Golle2021-04-091-39/+243
| | | | | | | | | | | | | | | | | | U-Boot has recently added support for having data blobs in uImage.FIT images stored at offsets after the FDT structure rather than embedding the data into the FDT structure itself. This is useful as it allows parts of the image to be mapped by the FIT partition parser, and it allows the FIT structure itself to be parsed more easily as it usually fits into single page. mtdsplit_fit assumed that the total length of an image is identical to the length of the FDT structure. For uImage.FIT with external data this assumption no longer holds true. Add support for uImage.FIT with external data to mtdsplit_fit and in in that case only split-off rootfs_data -- selecting and mapping rootfs partition is left to the block partition parser just like on UBI and block/GPT based platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: bpi-r64: erase eMMC environment on installationDaniel Golle2021-04-091-1/+1
| | | | | | | Erase U-Boot environment partition on eMMC on installation to make sure chages are applied. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: mikrotik: define the testing kernel versionKoen Vandeputte2021-04-091-0/+2
| | | | | | | | | | commit d6b785d477 ("ath79: add kernel 5.10 support") moved KERNEL_TESTING_PATCHVER to a subtarget level, but is looks like Mikrotik subtarget was forgotten. Also add it for Mikrotik. Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
* firmware-utils: add -Wall to most toolsRafał Miłecki2021-04-091-43/+43
| | | | | | This helps spotting possible problems Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: fix -Wpointer-sign warningsRafał Miłecki2021-04-0918-54/+81
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: fix -Wmaybe-uninitialized warningsRafał Miłecki2021-04-096-4/+18
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: fix few random warningsRafał Miłecki2021-04-097-7/+3
| | | | | | | | | 1. -Wunused-label 2. -Wparentheses 3. -Wmisleading-indentation 4. -Wformat-overflow Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: fix unused variable warningsRafał Miłecki2021-04-0920-60/+18
| | | | | | | | This fixes warnings from the: 1. -Wunused-variable 2. -Wunused-but-set-variable Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: fix all -Wformat warningsRafał Miłecki2021-04-092-3/+3
| | | | | | | 1. Use %hhu for uint8_t 2. Use %z for size_t Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: enable Netgear R8000P bootloader imageRafał Miłecki2021-04-081-2/+2
| | | | | | | | | | | | | | | | | | This enables building BCM4908 "raw" image that can be flashed using bootloader web UI. It requires serial console access & stopping booting by the "Press any key to stop auto run". It's easy to build vendor like CHK image but it can't be safely flashed using vendor UI at this point. Netgear implements method called "NAND incremental flashing" that doesn't seem to flash bootfs partition as provided. Above method seems to update vmlinux.lz without updating 94908.dtb. It prevents OpenWrt kernel from booting due to incomplete DTB file. Full Netgear R8000P support can be enabled after finding a way to make vendor firmware flash OpenWrt firmware including the 94908.dtb update. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: enable target & Asus GT-AC5300 imageRafał Miłecki2021-04-082-1/+3
| | | | | | | | | OpenWrt was succesfully tested on the GT-AC5300 model. It's possible to: 1. Install OpenWrt using vendor UI 2. Perform UBI aware sysupgrade 3. Install vendor firmware using OpenWrt sysupgrade Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: bcm4908img: convert into a packageRafał Miłecki2021-04-085-2/+62
| | | | | | | | | | bcm4908img is a tool managing BCM4908 platform images. It's used for creating them as well as checking, modifying and extracting data from. It's required by both: host (for building firmware images) and target (for sysupgrade purposes). Make it a host/target package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: bcm4908img: fix uninitialized var usageRafał Miłecki2021-04-081-3/+7
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: rt305x: use lzma-loader for ZyXEL Keenetic Lite rev.BSzabolcs Hubai2021-04-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes boot loader LZMA decompression issue, reported by GitHub user KOLANICH at [0]. The reported LZMA ERROR has date of 2020-07-20, soon after the device support landed: Ralink UBoot Version: 3.5.2.4_ZyXEL .... 3: System Boot system code via Flash. Image Name: MIPS OpenWrt Linux-4.14.187 Created: 2020-07-20 3:39:11 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1472250 Bytes = 1.4 MB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover [0] https://github.com/openwrt/openwrt/commit/fea232ae8feb6af780fd4fa78ebe9231778bf75a#commitcomment-45016560 Fixes: 4dc9ad4af8c921494d20b303b6772fc6b5af3a69 ("ramips: add support for ZyXEL Keenetic Lite Rev.B") Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
* ath79: move pcie node to DTSI for qca955x Senao APsMichael Pratt2021-04-084-29/+9
| | | | | | | | | | pcie0 is the same for this generation of Senao APs while eth0, eth1, and wmac can differ the qca,no-eeprom property has no effect for the ath10k drivers Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: cleanup DTS for ALLNET ALL-WAP02860ACMichael Pratt2021-04-081-92/+17
| | | | | | | | | | | | | | | | | | | | | | | | | use qca955x_senao_loader.dtsi because it is the same hardware / partitioning and some cleanup Effects: nodes to match similar boards - keys - eth0 - pcie0 bumps SPI frequency to 40 MHz removes &pll node: the property is defined in qca955x.dtsi removes qca,no-eeprom: has no effect with mtd-cal-data property (also spelling) Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: add factory.bin for ALLNET ALL-WAP02860ACMichael Pratt2021-04-083-4/+37
| | | | | | | | | | | | | | | This device is a Senao-based product using hardware and software from Senao with the tar-gz platform for factory.bin and checksum verification at boot time using variables stored in uboot environment and a 'failsafe' image when it fails. Extremely similar hardware/software to Engenius EAP1200H and other Engenius APs with qca955x Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: add Senao 'failsafe' sysupgrade procedureMichael Pratt2021-04-089-4/+157
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a similar upgrade method for sysupgrade.bin, like factory.bin, for Senao boards with the tar.gz OEM upgrade platform, and 'failsafe' image which is loaded on checksum failure. This is inspired by the OEM upgrade script /etc/fwupgrade.sh and the existing platforms for dual-boot Senao boards. Previously, if the real kernel was damaged or missing the only way to recover was with UART serial console, because the OKLI lzma-loader is programmed to halt. uboot did not detect cases where kernel or rootfs is damaged and boots OKLI instead of the failsafe image, because the checksums stored in uboot environment did not include the real kernel and rootfs space. Now, the stored checksums include the space for both the lzma-loader, kernel, and rootfs. Therefore, these boards are now practically unbrickable. Also, the factory.bin and sysupgrade.bin are now the same, except for image metadata. This allows for flashing OEM image directly from openwrt as well as flashing openwrt image directly from OEM. Make 'loader' partition writable so that it can be updated during a sysupgrade. tested with ENS202EXT v1 EAP1200H EAP350 v1 EAP600 ECB350 v1 ECB600 ENH202 v1 Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: adjust ath79/tiny Senao APs to 4k blocksizeMichael Pratt2021-04-086-3/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ath79/tiny kernel config has CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y from commit 05d35403b211ccb9bf20e2b3c0b7a30c82c6d6a2 Because of this, these changes are required for 2 reasons: 1. Senao devices in ath79/tiny with a 'failsafe' partition and the tar.gz sysupgrade platform and a flash chip that supports 4k sectors will fail to reboot to openwrt after a sysupgrade. the stored checksum is made with the 64k blocksize length of the image to be flashed, and the actual checksum changes after flashing due to JFFS2 space being formatted within the length of the rootfs from the image example: 0x440000 length of kernel + rootfs (from sysupgrade.bin) 0x439000 offset of rootfs_data (from kernel log) 2. for boards with flash chips that support 4k sectors: saving configuration over sysupgrade is not possible because sysupgrade.tgz is appended at a 64k boundary and the mtd parser starts JFFS2 at a 4k boundary. for boards with flash chips that do not support 4k sectors: partitioning with 4k boundaries causes a boot loop from the mtd parser not finding kernel and rootfs. Also: Some of the Senao boards that belong in ath79/tiny, for example ENH202, have a flash chip that does not support 4k sectors (no SECT_4K symbol in upstream source). Because of this, partitioning must be different for these devices depending on the flash chip model detected by the kernel. Therefore: this creates 2 DTSI files to replace the single one with 64k partitioning for 4k and 64k partitioning respectively. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: remove 'fakeroot' for Senao devicesMichael Pratt2021-04-086-49/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By using the same custom kernel header magic in both OKLI lzma-loader, DTS, and makefile this hack is not necessary anymore However, "rootfs" size and checksum must now be supplied by the factory.bin image through a script that is accepted by the OEM upgrade script. This is because Senao OEM scripts assume a squashfs header exists at the offset for the original "rootfs" partition which is actually the kernel + rootfs in this implementation, and takes size value from the header that would be there with hexdump, but this offset is now the uImage header instead. This frees up 1 eraseblock previously used by the "fakeroot" partition for bypassing the OEM image verification. Also, these Senao devices with a 'failsafe' partition and the tar-gz factory.bin platform would otherwise require flashing the new tar-gz sysupgrade.bin afterward. So this also prevents having to flash both images when starting from OEM or 'failsafe' the OEM upgrade script verifies the header magic numbers, but only the first two bytes. Example: [ "${magic_word_kernel}" = "2705" ] && [ "${magic_word_rootfs}" = "7371" -o "${magic_word_rootfs}" = "6873" ] && errcode="0" therefore picked the magic number 0x73714f4b which is 'sqOK' Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: lzma-loader: allow setting custom kernel magicMichael Pratt2021-04-084-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ...and max flash offset The mtdsplit parser was recently refactored to allow the kernel to have custom image header magic. Let's also do this for the lzma-loader For example: When implemented together, this allows the kernel to "appear" to be a rootfs by OEM software in order to write an image that is actually kernel + rootfs. At the same time, it would boot to openwrt normally by setting the same magic in DTS. Both of the variables have a default value that is unchanged when not defined in the makefiles This has no effect on the size of the loader when lzma compressed. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* realtek: allow writing to "u-boot-env2"Bjørn Mork2021-04-085-5/+0
| | | | | | | | U-Boot uses the "bootpartition" variable stored in "u-boot-env2" to select the active system partition. Allow updates to enable system switching from OpenWrt. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* uboot-envtools: add wrapper scripts for alternate configBjørn Mork2021-04-083-0/+6
| | | | | | | | Now that we can create an alternate configuration file, add two wrapper scripts for simple access to it using the alternate alternate application names `fw_printsys' and `fw_setsys'. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* uboot-envtools: add support for multiple config partitionsBjørn Mork2021-04-083-15/+32
| | | | | | | | | | | | | | | | | | | | | | Most (all?) of the realtek devices have two u-boot config partitions with a different set of variables in each. The U-Boot shell provides two sets of apps to manipulate these: printenv- print environment variables printsys- printsys - print system information variables saveenv - save environment variables to persistent storage savesys - savesys - save system information variables to persistent storage setenv - set environment variables setsys - setsys - set system information variables Add support for multiple ubootenv configuration types, allowing more than one configuration file. Section names are not suitable for naming the different configurations since each file can be the result of multiple sections in case of backup partitions. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* bcm4908: fix Netgear R8000P imageRafał Miłecki2021-04-071-2/+5
| | | | | | Use vendor format to allow flashing using Negear UI. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: add sysupgrade supportRafał Miłecki2021-04-071-0/+213
| | | | | | | | | | It supports flashing OpenWrt images (bootfs & UBI upgrade) as well as vendor images (whole MTD partition write). Upgrading cferom is unsupported. It requires copying device specific data (like MAC) to target image before flashing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mt76: update to the latest versionFelix Fietkau2021-04-071-3/+3
| | | | | | | | | | | | | | 7d35b7a15d1d mt76: mt7915: add wifi subsystem reset 04122c89749d mt76: fix rx amsdu subframe processing 5e764ec9bece mt76: mt7921: introduce MT_WFDMA_DUMMY_CR definition cf0badbc0497 mt76: mt7921: fix inappropriate WoW setup with the missing ARP informaiton f32a4e15f5b2 mt76: mt7921: fix the dwell time control 54f52771a04a mt76: mt7921: fix kernel crash when the firmware fails to download 97189d2a045b mt76: mt7921: fix the insmod hangs dcdbd7c89cf5 mt76: mt7921: fix MT_PCIE_MAC_INT_ENABLE access 813db729c02f mt76: mt7921: reduce the data latency during hw scan Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm4908: pad firmware image bootfs JFFS2 partition to 8 MiBRafał Miłecki2021-04-071-1/+1
| | | | | | | | | This way MTD "bootfs" partition will be always 8+ MiB. This should be enough for any custom / future firmware to fit its bootfs (e.g. big kernel) without having to repertition whole flash. That way we can preserve UBI and its erase counters during sysupgrade. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: bcm4908img: extract bootfs without paddingRafał Miłecki2021-04-071-6/+27
| | | | | | | | JFFS2 bootfs partition in a BCM4908 image usually includes some padding. For flashing it individually (writing to designed MTD partition) we want just JFFS2 data. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: bcm4908img: fix extracting cferomRafał Miłecki2021-04-071-1/+1
| | | | | | Fix offset to extract proper data when image contains vendor header. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: bcm4908img: support extracting bootfs & rootfsRafał Miłecki2021-04-071-0/+35
| | | | | | | It's required for upgrading firmware using single partitions instead of just blindly writing whole image. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: bcm4908img: replace size with offsetRafał Miłecki2021-04-071-20/+35
| | | | | | | It's much easier to operate on BCM4908 image data with absolute offset of each section stored. It doesn't require summing sizes over and over. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: ar934x-nand: fix broken nand on kernel 5.10Koen Vandeputte2021-04-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Booting current 5.10.x testing kernel shows this: [ 0.335781] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 0.342280] nand: Samsung NAND 128MiB 3,3V 8-bit [ 0.346982] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.354703] ar934x-nand 1b800200.nand: unknown ECC mode 2 [ 0.360193] ar934x-nand 1b800200.nand: nand_scan failed, err:-22 [ 0.366341] ar934x-nand: probe of 1b800200.nand failed with error -22 ... [ 1.089264] /dev/root: Can't open blockdev [ 1.093482] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 1.101077] Please append a correct "root=" boot option; here are the available partitions: [ 1.109555] 1f00 64 mtdblock0 [ 1.109559] (driver?) [ 1.116199] 1f01 48 mtdblock1 [ 1.116202] (driver?) [ 1.122841] 1f02 4 mtdblock2 [ 1.122844] (driver?) [ 1.129493] 1f03 4 mtdblock3 [ 1.129497] (driver?) [ 1.136138] 1f04 4 mtdblock4 [ 1.136142] (driver?) [ 1.142787] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.151168] Rebooting in 1 seconds.. The issue is caused by a wrong check for ECC engine type on newer kernels. Fix this. Bootlog after: [ 0.335689] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 0.342192] nand: Samsung NAND 128MiB 3,3V 8-bit [ 0.346884] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.354611] Scanning device for bad blocks [ 0.364924] random: fast init done [ 0.496641] 3 fixed-partitions partitions found on MTD device ar934x-nand [ 0.503545] Creating 3 MTD partitions on "ar934x-nand": [ 0.508865] 0x000000000000-0x000000040000 : "booter" [ 0.515133] 0x000000040000-0x000000400000 : "kernel" [ 0.523265] 0x000000400000-0x000008000000 : "ubi" Fixes: fb64e2c30f ("ath79: ar934x-nand: add kernel 5.10 compatibility") Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
* bcm4908: rename bootfs dummy file to the 1-openwrtRafał Miłecki2021-04-061-1/+1
| | | | | | | | | | | | The purpose of that dummy file is to make CFE work properly with OpenWrt bootfs. CFE for some reason ignores JFFS2 files with ino 0. Rename it to 1-openwrt so: 1. It's consistent with bcm63xx 2. It's OpenWrt specific so sysupgrade can distinguish it from vendor images Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* glibc: update to latest git HEAD (BZ #27468, BZ #27511)Hans Dedecker2021-04-051-2/+2
| | | | | | | | e78ea9bd26 Update Nios II libm-test-ulps. 98bb18f52a malloc: Fix a realloc crash with heap tagging [BZ 27468] fc4ecce85b S390: Also check vector support in memmove ifunc-selector [BZ #27511] Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uboot-mediatek: update to v2021.04Daniel Golle2021-04-059-79/+8
| | | | | | | | | | Remove patches merged upstream and refresh the remaining ones. Runtime tested on * Bananapi BPi-R64 (eMMC and SD Card) * Linksys E8450 (SPI-NAND) * Ubiquiti UniFi 6 LR (SPI-NOR) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* lldpd: further size reductionsStijn Tintel2021-04-051-2/+2
| | | | | | | | | | | Size difference on mips_4kec: Before: 120196 After: 120006 Closes https://github.com/openwrt/openwrt/pull/3823 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Suggested-by: Lucian Cristian <lucian.cristian@gmail.com>
* lldpd: enable LTOStijn Tintel2021-04-051-1/+4
| | | | | | | | | Size difference on mips_4kec: W/o LTO: 139674 W/ LTO: 120196 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Suggested-by: Lucian Cristian <lucian.cristian@gmail.com>
* lldpd: bump to 1.0.9Stijn Tintel2021-04-052-64/+3
| | | | | | Contains fixes related to CVE-2020-27827. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* lldpd: add libcap dependencyStijn Tintel2021-04-052-19/+2
| | | | | | | | | Now that libcap is in OpenWrt base, we can drop our custom patch to disable libcap support and have lldpd depend on it instead. This will allow the monitor process to drop its privileges instead of running as root, improving security. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* libcap: bump to 2.48Stijn Tintel2021-04-051-2/+2
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* libcap: drop invalid copyright headerStijn Tintel2021-04-051-2/+0
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 18:06:36 +0000