aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* hostapd: add missing function declarationDavid Bauer2021-12-271-0/+10
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add missing UBNT_REVISIONNick Hainke2021-12-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UBNT_REVISION was already added for the ubnt-xw target because: U-boot bootloader on M-XW devices expects factory image revision version in specific format. On airOS v6.1.7 with `U-Boot 1.1.4-s1039 (May 24 2017 - 15:58:18)` bootloader checks if the revision major(?) number is actually a number, but in currently generated images there's OpenWrt text and so the check fails ... By placing arbitrary correct number first in major version, we make the bootloader happy and we can flash factory images over TFTP again. commit d42a7c469909 ("ath79: ubnt-m-xw: Fix factory image flashing using TFTP recovery method") Fixes errors in the form of (tftp flashing): sent DATA <block=8577, 412 bytes> received ERROR <code=2, msg=Firmware check failed> Error code 2: Firmware check failed The missing UBNT_REVISION was not noticed before, since the UBNT_REVISION field for the ubnt-xm target was also set to: "42.OpenWrt-..." Probably, UBNT_REVISION for the ubnt-xm target was set by the ubnt-xw and was never overridden somewhere else. However, it is missing and should be part of the ubnt-xm device. Signed-off-by: Nick Hainke <vincent@systemli.org>
* sunxi: Use rtl8723bu-firmware instead of rtl8723bs-firmwareHauke Mehrtens2021-12-271-4/+4
| | | | | | | | The firmware for the rtl8723bs chip is now included in the rtl8723bu-firmware package. Fixes: 397dfe4a97e6 ("linux-firmware: Update to version 20121216") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tcpdump: libpcap: Remove http://www.us.tcpdump.org mirrorHauke Mehrtens2021-12-272-4/+2
| | | | | | | | The http://www.us.tcpdump.org mirror will go offline soon, only use the normal download URL. Reported-by: Denis Ovsienko <denis@ovsienko.info> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: Update to version 20121216Hauke Mehrtens2021-12-272-9/+3
| | | | | | | | | | | | | | | | | | | | | The rtl8723bs firmware was removed and a symlink to the rtl8723bu firmware was created like it is done in upstream linux-firmware. The following OpenWrt packages are changing: * amdgpu-firmware: Multiple updates and new files * ar3k-firmware: Multiple updates and new files * ath10k-firmware-qca6174: Updated ath10k/QCA6174/hw3.0/board-2.bin * bnx2x-firmware: Added bnx2x-e1-7.13.21.0.fw, bnx2x-e1h-7.13.21.0.fw and bnx2x-e2-7.13.21.0.fw * iwlwifi-firmware-iwl8260c: Updated iwlwifi-8000C-36.ucode * iwlwifi-firmware-iwl8265: Updated iwlwifi-8265-36.ucode * iwlwifi-firmware-iwl9000: Updated iwlwifi-9000-pu-b0-jf-b0-46.ucode * iwlwifi-firmware-iwl9260: Updated iwlwifi-9260-th-b0-jf-b0-46.ucode * r8169-firmware: Updated rtl8153c-1.fw * rtl8723bs-firmware: removed * rtl8723bu-firmware: Added rtlwifi/rtl8723bs_nic.bin symlink * rtl8822ce-firmware: Updated rtw8822c_fw.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: mt7622: unifi6lr: properly register Ethernet PHYDaniel Golle2021-12-261-8/+4
| | | | | | | | | | | This change enables proper Ethernet link status and speed reporting on the Ubiquiti UniFi 6 LR access point: mtk_soc_eth 1b100000.ethernet eth0: PHY [mdio-bus:08] driver [Aquantia AQR112C] (irq=POLL) mtk_soc_eth 1b100000.ethernet eth0: configuring for phy/2500base-x link mode mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: enable driver for Aquantia PHYsDaniel Golle2021-12-261-0/+1
| | | | | | | Enable Aquantia Ethernet PHY driver as there is an AQR112C 2500Base-T PHY in the Ubiquiti UniFi 6 LR access point. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Clause 45 MDIO accessDaniel Golle2021-12-261-0/+94
| | | | | | | Add support for Clause 45 MDIO PHY register read and write operations to mtk_eth_soc driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: generic: refresh patchDaniel Golle2021-12-261-1/+1
| | | | | | 722-net-phy-aquantia-Add-AQR113-driver-support.patch needs refresh. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: mac80211: refresh patchsetNick Hainke2021-12-241-5/+5
| | | | | | | Refreshed: - 311-mac80211-use-coarse-boottime-for-airtime-fairness-co.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: ath10k: provide a build variant for small RAM devicesNick Hainke2021-12-243-4/+82
| | | | | | | | | | | | | | | | | | | | | | | Based on: 1ac627024de9 ("kernel: ath10k-ct: provide a build variant for small RAM devices") Like described in the ath10k-ct-smallbuffers version, oom-killer gets triggered frequently by devices with small RAM. That change is necessary for many community mesh networks which use ath10k based devices with too little RAM. The -ct driver has been proven unstable if used with 11s meshing and only wave2 chipsets are supporting 11s. Freifunk Berlin is nowadays assembling its firmware-based completely of vanilla OpenWRT with some package additions which are made through the imagebuilder. Therefore we cannot take the approach other freifunk communities have taken to maintain that patch downstream [1]. Other communities consider these devices as broken and that change would pretty much give those devices a second life [2]. [1] - https://git.freifunk-franken.de/mirror/openwrt/commit/450b306e540bc0f2c8a8841bbe4d9612f2b8cdea [2] - https://github.com/freifunk-gluon/gluon/issues/1988#issuecomment-619532909 Signed-off-by: Simon Polack <spolack+git@mailbox.org> Signed-off-by: Nick Hainke <vincent@systemli.org>
* bcm4908: include ATF in bootfs imagesRafał Miłecki2021-12-242-0/+16
| | | | | | It's required for proper booting. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* arm-trusted-firmware-bcm63xx: add ATF for Broadcom devicesRafał Miłecki2021-12-241-0/+42
| | | | | | | Right now it includes bcm4908 variant only that is required by BCM4908 family devices with U-Boot. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mvebu: puzzle: wan LED and fix default networkDaniel Golle2021-12-232-1/+21
| | | | | | | | | Fix default network configuration of the Puzzle-M902 so all LAN ports are included in the LAN bridge. Setup network LED to indicate WAN port link status, like vendor firmware does as well. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: enable Aquantia phy driver for Puzzle devicesDaniel Golle2021-12-233-15/+16
| | | | | | | Fixes Ethernet link status on all ports and makes 2.5G ports usable in 2.5G and 1G full-duplex mode. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add id for AQR112 Ethernet phy variantsDaniel Golle2021-12-231-0/+55
| | | | | | Add ids for AQR112R and AQR112C 2.5G Ethernet PHYs. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: import patch enabling AQR113 PHYDaniel Golle2021-12-231-0/+43
| | | | | | Add PHY ID for the Aquantia AQR113 PHY. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: import patch enabling AQR112 and AQR412 PHYDaniel Golle2021-12-231-0/+146
| | | | | | | | Copy and refresh patch enabling AQR112 and AQR412 Ethernet PHY from layerscape (5.4) target to generic (5.10) as AQR112 can also be found on other targets as well. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: only attempt to set qos map if supported by the driverFelix Fietkau2021-12-231-0/+12
| | | | | | Fixes issues with brcmfmac Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: remove accidentally added fileDaniel Golle2021-12-211-11/+0
| | | | | | | Remove accidentally added file (which was a left-over of a by-now replaced driver) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: keep HE capability after channel switch in AP+STA/MeshArnout Vandecappelle (Essensium/Mind)2021-12-211-1/+2
| | | | | | | The auto-ht option already kept HT and VHT support, but wasn't updated to support HE (11ax). Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* mvebu: puzzle-m901: add LEDs, fan and reset buttonDaniel Golle2021-12-211-0/+84
| | | | | | | Wire up MCU driver for LEDs, fan and temperature sensor, and add GPIO reset button just like on the M902 also on the Puzzle M901. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: puzzle-m902: add GPIO reset buttonDaniel Golle2021-12-211-0/+11
| | | | | | | Add reset button to device tree so it has the function expected from usual OpenWrt devices. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: puzzle-mcu: improve led driverDaniel Golle2021-12-211-51/+75
| | | | | | | | Set blinking mode using scheduled work instead of blocking which may result in deadlocks. Add dynamic kprintf debugging hexdumps of all MCU rx and tx. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: switch to Kernel 5.10Paul Spooren2021-12-211-2/+1
| | | | | | | | | | Kernel 5.10 is used by many people since quite a while. With other targets already moved to 5.10, let ath79 follow suit. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ath79/tl-wdr3600; ath79/tl-wdr4300] Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl> [ath79/tl-wdr4300] Signed-off-by: Paul Spooren <mail@aparcar.org> Signed-off-by: David Bauer <mail@david-bauer.net>
* qoriq: add support for WatchGuard Firebox M300Stijn Tintel2021-12-216-0/+450
| | | | | | | | | | | | | | | | | | | | | | | This device is based on NXP's QorIQ T2081QDS board, with a quad-core dual-threaded 1.5 GHz ppc64 CPU and 4GB ECC RAM. The board has 5 ethernet interfaces, of which 3 are connected to the ethernet ports on the front panel. The other 2 are internally connected to a Marvell 88E6171 switch; the other 5 ports of this switch are also connected to the ethernet ports on the front panel. Installation: write the sdcard image to an SD card. Stock U-Boot will not boot, wait for it to fail then run these commands: setenv OpenWrt_fdt image-watchguard-firebox-m300.dtb setenv OpenWrt_kernel watchguard_firebox-m300-kernel.bin setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; ext2load mmc 0:1 $fdtaddr $OpenWrt_fdt; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr - $fdtaddr' saveenv reset The default U-Boot boot entry will now boot OpenWrt from the SD card. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* qoriq: new targetStijn Tintel2021-12-216-1/+453
| | | | | | | | | | | | | | | | | | | | | | | Add a new target named "qoriq", that will support boards using PowerPC processors from NXP's QorIQ brand. This doesn't actually add support for any board yet, so that installation instructions can go in the commit message of the commit that adds actual support for a board. Using CONFIG_E6500_CPU here due to the kernel using -mcpu=powerpc64 rather than -mcpu=e5500 when selecting CONFIG_E5500_CPU. The only difference between e5500 and e6500 is AltiVec support, and the kernel checks for it at runtime. Musl will only check at runtime if AltiVec support is disabled at compile-time, so we need to use e5500 in CPU_TYPE to avoid SIGILL. Math emulation (CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED) is required, as neither e5500 nor e6500 implement fsqrt nor fsqrts, and musl hardcodes sqrt and sqrtf to use these ASM instructions on PowerPC64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
* libunwind: add ppc64 supportStijn Tintel2021-12-212-2/+31
| | | | | | | | Backport an upstream patch to make libunwind build on ppc64, and add powerpc64 to the dependencies. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* nettle: disable assembler on ppc64Stijn Tintel2021-12-211-1/+2
| | | | | | | | | | | | As of version 3.7, Nettle added PowerPC64 assembly for several algorithms. Unfortunately, they cause build to fail due to ABI mismatch: gcm-hash.o: ABI version 1 is not compatible with ABI version 2 output Disable assembler when ppc64 and musl are used for now. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* openssl: add ppc64 supportStijn Tintel2021-12-213-2/+69
| | | | | | | | | | | | | | Backport an upstream patch that adds support for ELFv2 ABI on big endian ppc64. As musl only supports ELFv2 ABI on ppc64 regardless of endianness, this is required to be able to build OpenSSL for ppc64be. Modify our targets patch to add linux-powerpc64-openwrt, which will use the linux64v2 perlasm scheme. This will probably break the combination ppc64 with glibc, but as we really only want to support musl, this shouldn't be a problem. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
* toolchain/gcc: use ELFv2 ABI on ppc64 with muslStijn Tintel2021-12-211-0/+1
| | | | | | | | | | | | | | At configuration time, gcc assumes that ppc64be targets use the ELFv1 ABI, and ppc64le targets use the ELFv2 ABI. However, musl libc does not support the ELFv1 ABI on ppc64 at all, regardless of the endianness. Therefore, when building for a ppc64 arch and with musl libc, instruct gcc to use the ELFv2 ABI. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93157 for more info. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
* build: add e5500 CPU_TYPEStijn Tintel2021-12-211-0/+1
| | | | | | | | This CPU type is compatible with NXP's PPC based QorIQ processors, and will be used by the upcoming new qoriq target. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mvebu: puzzle-m902: add driver for MCU driving LEDs, fan and buzzerDaniel Golle2021-12-2111-1/+2462
| | | | | | | | | | Backport MFD driver for communicating with the on-board MCU found on IEI World Puzzle appliances. Improve the driver to support multiple LEDs, apply a default state and let MCU take care of blinking if timing is within supported range. Wire up LEDs and fan for Puzzle M902 in device tree. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bpf: add -mcpu=v3 to support 32-bit alu opsFelix Fietkau2021-12-211-1/+1
| | | | | | Fixes JIT on 32-bit ARM and improves performance Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: fix Makefile dependencies for mt7921Lorenzo Bianconi2021-12-211-3/+4
| | | | Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
* kernel: drop obsolete kmod-video-core dependenciesStijn Tintel2021-12-201-1/+1
| | | | | | These dependencies do not exist in any of the supported kernel versions. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: drop obsolete symbols from kmod-video-coreStijn Tintel2021-12-201-7/+1
| | | | | | These symbols don't exist in any of the supported kernel versions. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* procd: update to git HEADDaniel Golle2021-12-202-17/+3
| | | | | | | | eb522fc uxc: consider uvol and etc location for configurations 16a6ee9 uxc: integrate console into uxc 129d050 remove ujail-console Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: make OpenWrt statistics per-BSSDavid Bauer2021-12-202-20/+20
| | | | | | | WNM and RRM statistics were incorrectly per-PHY, leading to shared statistic counters per BSS. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: provide BSS-transition-queries to ubus subscribersDavid Bauer2021-12-202-10/+69
| | | | | | | | | | | | | | | Provide incoming BSS transition queries to ubus subscribers. This allows external steering daemons to provide clients with an optimal list of transition candidates. This commit has no functional state in case no ubus subscriber is present or it does not handle this ubus message. To prevent hostapd from sending out a generic response by itself, a subscribing daemon has to return a non-zero response code to hostapd. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: WNM: allow specifying dialog-tokenDavid Bauer2021-12-202-4/+110
| | | | | | | | | | Backport a patch to allow extending the ubus BSS-transition method for specifying individual dialog tokens for BSS transition management requests. This is required for handling BSS transition queries in the future. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: work around duplicate MAC address on U6 LiteDavid Bauer2021-12-201-0/+15
| | | | | | | | | | | | | | | | | | | | | | The UniFi 6 Lite has two MAC addresses for the 2.4 and 5GHz radio in it's EEPROM partition. On my unit these are F4 92 BF A0 BB 6F F6 92 BF A0 BB 6F The problem with these is that mac80211 increases the first octet by 2, which leads to conflicting MAC addresses between radios. Work around this problem for now by increasing the last octet by 1 on the 5 GHz radio. Ubiquiti increases the last octet by 2 for each subsequent VAP created per radio. Ideally we should do the same, however this functionality is currently lacking from mac80211. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: mt7623: bpi-r2: add ethernet alias to device treeDaniel Golle2021-12-181-0/+10
| | | | | | | Add ethernet0 alias in device tree to make U-Boot inherit the Ethernet mac address (set via environment variable 'ethaddr') down to Linux. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* odhcp6c: update to latest git HEADHans Dedecker2021-12-171-3/+3
| | | | | | | | 39b584b Revert "dhcpv6: add a minimum valid lifetime for IA_PD updates" c9578e1 dhcpv6: add support for null IA_PD valid lifetime ca43ea3 dhcpv6: add a minimum valid lifetime for IA_PD updates Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to latest git HEADHans Dedecker2021-12-171-3/+3
| | | | | | | | | 5ca5e0b netifd: allow disabling rule/rule6 config sections 8875960 interface-ip: add support for IPv6 prefix invalidation e589c05 interface-ip: use metric when looking for a route b54ffde main: fix hotplug script usage message Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: 5.10: consolidate mac80211 crypto optionsSergey Ryazanov2021-12-1743-160/+2
| | | | | | | | | | | | | | | | | | | | | | Each of - CRYPTO_AEAD2 - CRYPTO_AEAD - CRYPTO_GF128MUL - CRYPTO_GHASH - CRYPTO_HASH2 - CRYPTO_HASH - CRYPTO_MANAGER2 - CRYPTO_MANAGER - CRYPTO_NULL2 either directly required for mac80211 crypto support, or directly selected by such options. Support for the mac80211 crypto was enabled in the generic config since c7182123b9 ("kernel: make cryptoapi support needed by mac80211 built-in"). So move the above options from the target configs to the generic config to make it clear why do we need them. CC: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: filter out both Clang and LLD versionsSergey Ryazanov2021-12-1747-46/+2
| | | | | | | | Both CLANG_VERSION and LLD_VERISON are autogenerated runtime configuration options, so add them to the kernel configuration filter and remove from generic and per-target configs to keep configs clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* toolchain/gcc: refresh gcc-11.2.0 patchIlya Lipnitskiy2021-12-171-7/+3
| | | | | | | | | Run make toolchain/gcc/minimal/refresh (with glibc, with musl toolchain/gcc/{initial,final}/refresh don't work) Fixes: ab241e0937c9 ("toolchain/gcc: fix build on MacOS arm64") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* toolchain/gcc: replace revert with upstream fixIlya Lipnitskiy2021-12-172-160/+114
| | | | | | | This will make upgrade to v11.3.0 easier and follows upstream more closely. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* toolchain/gcc: remove upstreamed patch, add backportIlya Lipnitskiy2021-12-172-111/+46
| | | | | | | | | | | | | | | | | | | | This patch has been upstream since GCC 10. Dragan Mladjenovic (2): Emit .note.GNU-stack for soft-float linux targets. Emit .note.GNU-stack for hard-float linux targets. Link: https://gcc.gnu.org/g:a3c1e1f2ff88 Link: https://gcc.gnu.org/g:54b3d52c3cca Add backport patch to define TARGET_LIBC_GNUSTACK on musl to add .note.GNU-stack on hard-float MIPS targets. Link: https://gcc.gnu.org/g:25abbb924968 The net effect should be the exact same functionality while following upstream code instead of a custom outdated patch. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 02:12:42 +0000