aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* at91: kernel: bump to 5.10Claudiu Beznea2021-10-2414-779/+109
| | | | | | | | | | | | Bump at91 targets to kernel v5.10. With this patches and files for wb45n and wb50n were removed as they are now included in upstream kernel. Along with: - this the kernel config for sama5d2 and sam9x targets has been refreshed (with make kernel_menuconfig + save); - CONFIG_ARCH_AT91 and specific sam9x SoCs (AT91RM9200, AT91SAM9, SAM9X60) has been enabled such that sam9x SoCs to be able to boot. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* wolfssl: enable ECC Curve 25519 by defaultStan Grishin2021-10-241-1/+1
| | | | | | | * fixes https://github.com/openwrt/packages/issues/16652 see https://github.com/openwrt/packages/issues/16674#issuecomment-934983898 Signed-off-by: Stan Grishin <stangri@melmac.net>
* sunxi: 5.10: enable sun8i-thermalChukun Pan2021-10-242-1/+2
| | | | | | | | | | | | Enable the sun8i-thermal driver to allow reading the temperature of the SoC. As suggested by mans0n, disable this driver in the a8 subtarget because it does not support yet. Tested on NanoPi R1S H5. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* uclibc++: removeRosen Penev2021-10-249-428/+2
| | | | | | | | | | | | | | | No package here depends on it. Furthermore, uClibc++ is a fairly buggy C++ library and seems to be relatively inactive upstream. It also lacks proper support for modern C++11 features. The main benefit of it is size: 66.6 KB vs 287.3 KB on mips24kc. Static linking and LTO can help bring the size down of packages that need it. Added warning message to uclibc++.mk Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* u-boot.mk: always link host libraries staticAndre Heider2021-10-244-42/+1
| | | | | | | | Host libraries are only build static, so let's pass --static to pkg-config globally and remove the then unnecessary patches doing exactly that individually. Signed-off-by: Andre Heider <a.heider@gmail.com>
* tools/pkgconf: add PKG_CONFIG_EXTRAARGS for additional argumentsAndre Heider2021-10-241-1/+2
| | | | | | | This can be used my the OpenWrt build system to pass additional arguments when required. Signed-off-by: Andre Heider <a.heider@gmail.com>
* u-boot.mk: fix pkg-config usageAndre Heider2021-10-245-8/+3
| | | | | | | | Using Host/Exports doesn't work as intended, explicitly add the required vars so that u-boot finds the required libraries when building its tools. Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: 5.10: qca8k: backport qca8k_setup tidy-upMatthew Hagan2021-10-241-0/+151
| | | | | | | | Tidy qca8k_setup for loops relating to port handling. No functional changes. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport qca8k cpu_port_index fix in parse_port_configMatthew Hagan2021-10-241-0/+28
| | | | | | | Add cpu_port_index fix to apply settings to correct CPU port. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport qca8k feature additionsMatthew Hagan2021-10-2416-0/+1991
| | | | | | | | | | | | | | | | Backport Ansuel Smith's various qca8k feature additions: - mac-power-sel support - SGMII PLL explicit enable - tx/rx clock phase to falling edge - power-on-sel and LED open drain mode - cpu port 6 - qca8328 support - sgmii internal delay - move port config to dedicated struct - convert to yaml schema Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport QCA83x PHY resume fix, DAC amplitude preferred ↵Matthew Hagan2021-10-245-2/+378
| | | | | | | | | | | master, debug reg names Backport workaround for QCA8327 PHY resume, which does not properly support genphy_suspend/resume. Also add DAC amplitude fix for the QCA8327 PHY, set port to preferred master and add proper names to debug regs. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport at803x QCA83xx phy support improvementsMatthew Hagan2021-10-244-2/+207
| | | | | | | | | | This commit add accepted upstream patches that improve & tidy qca83xx support. 1 - Split qca8327 to A & B variants, identifiable by phy_id 2 - Add suspend/resume support to qca8xx phys 3 - Tidy spacing and phy naming. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport at803x internal QCA8327 PHY supportMatthew Hagan2021-10-241-0/+48
| | | | | | | | | Add support for qca8327 internal phy needed for correct init of the switch port. It does use the same qca8337 function and reg just with a different id. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport qca8k legacy mdio mapping panic fixMatthew Hagan2021-10-241-0/+80
| | | | | | | | Add backport of Ansuel Smith's "net: dsa: qca8k: fix kernel panic with legacy mdio mapping" patch. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport additional qca8k fixesMatthew Hagan2021-10-245-0/+537
| | | | | | | | | | | | Backport fixes including: net: dsa: qca8k: fix missing unlock on error in qca8k_vlan_(add|del) net: dsa: qca8k: check return value of read functions correctly net: dsa: qca8k: add missing check return value in qca8k_phylink_mac_config() net: dsa: qca8k: fix an endian bug in qca8k_get_ethtool_stats() net: dsa: qca8k: check the correct variable in qca8k_set_mac_eee() Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport qca8k stability improvementsMatthew Hagan2021-10-2426-5/+2660
| | | | | | | | | This is a backport of Ansuel Smith's "Multiple improvement to qca8k stability" series. The QCA8337 switch is available on multiple platforms including ipq806x, ath79 and bcm53xx. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* mac80211: Add devm_platform_get_and_ioremap_resource()Hauke Mehrtens2021-10-241-0/+79
| | | | | | | | This function is missing in kernel 5.4, but it is sued by ath10k. This fixes the build of ath10k on some targets. Fixes: cfe0eb7485d8 ("mac80211: Update to version 5.14.13-1") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: 5.10: silence bogus "Missing #address-cells in interrupt provider" ↵Christian Lamparter2021-10-241-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | warnings Rosen reported strange dtc warnings that had their origin in an upstream patch to 5.8-rc1. Upon further digging this revealed an ongoing thread [0] discussing the topic: > [...]I don't think we need a bunch of warning fix patches to add > these everywhere. Also, the need for #address-cells pretty much makes > no sense on any modern system. It is a relic from days when the bus > (address) topology and interrupt topology were related. and later on: > So really, we only need to be checking for #address-cells in nodes > with interrupt-map. This patch backports just the patch which removed the warning message (this is from the upstream dtc project [1] - but not the kernel). the patch does not add the checking of the #address-cells in nodes with interrupt-map. [0] <https://lore.kernel.org/linux-devicetree/91e3405245c89f134676449cf3822285798d2ed2.1612189652.git.michal.simek@xilinx.com/> [1] <https://git.kernel.org/pub/scm/utils/dtc/dtc.git/commit/?id=d8d1a9a77863a8c7031ae82a1d461aa78eb72a7b> Link: <https://github.com/openwrt/openwrt/pull/4685> Reported-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* image: define DEVICE_DTS_DELIMITER as per-device variableChristian Lamparter2021-10-241-2/+3
| | | | | | | | | DEVICE_DTS_DELIMITER needs to be in the DEFAULT_DEVICE_VARS list to work as expected. This was missing from the original version and got overlooked. Fixes: fd6790864739 ("scripts: mkits.sh: Allow legacy @ mode for dts creation") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: Update to version 5.15-rc6-1Hauke Mehrtens2021-10-2416-1773/+26
| | | | | | | | The removed patches were applied upstream. The Cisco Aironet 802.11b driver was removed from backports, remove it also from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.14.13-1Hauke Mehrtens2021-10-2422-1916/+154
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.13.19-1Hauke Mehrtens2021-10-2430-1100/+133
| | | | | | | | | The removed patches were applied upstream. of_get_mac_address() was backported in our OpenWrt kernel, remove the change from backports. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.12.19-1Hauke Mehrtens2021-10-2386-6099/+249
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.11.22-1Hauke Mehrtens2021-10-2388-1995/+366
| | | | | | | | The removed patches were applied upstream. This backports version 5.11.22 and later does not support kernel versions < 4.4, this allows us to remove some patches too. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ethtool: update to v5.14Hans Dedecker2021-10-231-3/+3
| | | | | | Update to newly released version 5.14 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "ethtool: update to v5.14"Hans Dedecker2021-10-232-4/+4
| | | | | | This reverts commit 7630001427fa266fa61da0b2533e2c1054eababe Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ethtool: update to v5.14Hans Dedecker2021-10-232-4/+4
| | | | | | Update to newly released version 5.14 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* umdns: add missing syscall to seccomp filterMichael Peleshenko2021-10-231-0/+1
| | | | | | | The 'clock_gettime64', syscall is missing. Found with 'utrace /usr/sbin/umdns' on an R7800. Signed-off-by: Michael Peleshenko <mpeleshenko@gmail.com>
* wireless-regdb: update to version 2021.08.28Christian Lamparter2021-10-231-2/+2
| | | | | | | | | | | | e983a25 Update regulatory rules for Ecuador (EC) a0bcb88 wireless-regdb: Update regulatory rules for Norway (NO) on 6 and 60 GHz cdf854d wireless-regdb: Update regulatory rules for Germany (DE) on 6GHz 86cba52 wireless-regdb: reduce bandwidth for 5730-5850 and 5850-5895 MHz in US 6fa2384 wireless-regdb: remove PTMP-ONLY from 5850-5895 MHz for US 9839e1e wireless-regdb: recent FCC report and order allows 5850-5895 immediately 42dfaf4 wireless-regdb: update 5725-5850 MHz rule for GB Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: chmod 1777 /var/lockDeomid Ryabkov2021-10-231-2/+3
| | | | | | | | | | | | | Per FHS 3.0, /var/lock is the location for lock files [1]. However its current permissions (755) are too restrictive for use by unprivileged processes. Debian and Ubuntu set them to 1777, and now so do we. [1] <https://refspecs.linuxfoundation.org/FHS_3.0/fhs-3.0.html#varlockLockFiles> Signed-off-by: Deomid Ryabkov <rojer@rojer.me> [fixed typo in commit message, had to remove "rojer" due to git hooks] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: ag71xx: Disable napi related interrupts during probeSven Eckelmann2021-10-231-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ag71xx_probe is registering ag71xx_interrupt as handler for the gmac0/gmac1 interrupts. The handler is trying to use napi_schedule to handle the processing of packets. But the netif_napi_add for this device is called a lot later in ag71xx_probe. It can therefore happen that a still running gmac0/gmac1 is triggering the interrupt handler with a bit from AG71XX_INT_POLL set in AG71XX_REG_INT_STATUS. The handler will then call napi_schedule and the napi code will crash the system because the ag->napi is not yet initialized: libphy: Fixed MDIO Bus: probed CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 81373408 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.152 #0 $ 0 : 00000000 00000001 00000000 8280bf28 $ 4 : 82a98cb0 00000000 81620000 00200140 $ 8 : 00000000 00000000 74657272 7570743a $12 : 0000005b 8280bdb9 ffffffff ffffffff $16 : 00000001 82a98cb0 00000000 8280bf27 $20 : 8280bf28 81620000 ffff8b00 8280bf30 $24 : 00000000 8125af9c $28 : 82828000 8280bed8 81610000 81373408 Hi : 00005fff Lo : 2e48f657 epc : 00000000 0x0 ra : 81373408 __napi_poll+0x3c/0x11c Status: 1100dc03 KERNEL EXL IE Cause : 00800008 (ExcCode 02) BadVA : 00000000 PrId : 00019750 (MIPS 74Kc) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : ffff8afb ffff8afa 81620000 00200140 00000000 82a98cb0 00000008 0000012c 81625620 81373684 ffffffff ffffffff ffffffef 00000008 816153d8 81620000 815b0d60 815bbd54 00000000 81753700 8280bf28 8280bf28 8280bf30 8280bf30 81753748 00000008 00000003 00000004 0000000c 00000100 3fffffff 8175373c 816059f0 814ddb48 00000001 8160ab30 81615488 810618bc 00000006 00000000 ... Call Trace: [<81373684>] net_rx_action+0xfc/0x26c [<814ddb48>] __do_softirq+0x118/0x2ec [<810618bc>] handle_percpu_irq+0x50/0x80 [<8125ab8c>] plat_irq_dispatch+0x94/0xc8 [<81004e98>] handle_int+0x138/0x144 Code: (Bad address in epc) ---[ end trace a60d797432b656b2 ]--- The gmcc0/gmac1 must be brought in a state in which it doesn't signal a AG71XX_INT_POLL related status bits as interrupt before registering the interrupt handler. ag71xx_hw_start will take care of re-initializing the AG71XX_REG_INT_ENABLE. Fixes: f529a3742043 ("surprise :p") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* kernel: backport GPIO LED patch for MT7530Rosen Penev2021-10-232-3/+184
| | | | | | | | | | | | | | | This allows to specify and control switch LEDs on devices using mt7530 (typically mediatek and ramips targets). Normally these LED GPIOs are 0, 3, 6, 9, and 12. wan/lan assignment is per device. GPIO 9 is normally inverted. so GPIO_ACTIVE_HIGH instead of GPIO_ACTIVE_LOW. Tested on Linksys E7350. Refreshed all patches. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ipq40xx: MR33: Fix LP5562 LED driver probeTan Zien2021-10-231-4/+15
| | | | | | | | | | | | | Add the reg and color property to each channel node. This update is to accommodate the multicolor framework. Refer to: <https://lore.kernel.org/all/20200622185919.2131-9-dmurphy@ti.com> <https://lore.kernel.org/all/20210818070209.1540451-1-michal.vokac@ysoft.com> Signed-off-by: Tan Zien <nabsdh9@gmail.com> [replaced links to lore, wrote something of a commit message] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mt76: update to the latest versionFelix Fietkau2021-10-231-3/+3
| | | | | | f6bde7ba82ee mt76: connac: fix unresolved symbols when CONFIG_PM is unset Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-10-231-3/+3
| | | | | | | | | | | | | | | | | 9d288d7c0c73 mt76: mt7615: apply cached RF data for DBDC 4d2e81d9ecab mt76: mt7915: remove mt7915_mcu_add_he() 2c8c3bcd766c mt76: mt7915: rework .set_bitrate_mask() to support more options 577d45f6e4a0 mt76: mt7915: rework debugfs fixed-rate knob b68af355f707 mt76: mt7915: fix endiannes warning mt7915_mcu_beacon_check_caps b52adf981561 mt76: mt7915: add WA firmware log support ed3d8569c400 mt76: mt7915: add debugfs knobs for MCU utilization 0f49a22314a5 mt76: mt7921: disable 4addr capability 754d4a37ab71 mt76: mt7921: fix mt7921s Kconfig f81f42fe875f mt76: Print error message when reading EEPROM from mtd failed fd25a550965d mt76: Make use of the helper macro kthread_run() 1d01257662a6 wireless: mediatek: mt7921: fix Wformat build warning Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uci: update to git HEADHauke Mehrtens2021-10-221-3/+3
| | | | | | cmake: Allow override of install directories Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* procd: update to git HEADHauke Mehrtens2021-10-221-3/+3
| | | | | | jail: Fix build with glibc Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* layerscape: Fix build in dtbHauke Mehrtens2021-10-2223-64/+37
| | | | | | | | This fixes a kernel build problem. The removed parts of the patch are already applied upstream. Fixes: 9ad3ef27b9ce ("kernel: bump 5.4 to 5.4.153") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* apm821xx: WNDAP6X0: add missed uci-default for compatChristian Lamparter2021-10-221-1/+3
| | | | | | | | This should have been included in the previous patch that resized the kernel partition to fit bigger kernels. Fixes: 7a6a3494450c ("apm821xx: WNDAP620 + WNDAP660: reorganize partitions for 5.10") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: implement new LED label naming schemeChristian Lamparter2021-10-2210-122/+273
| | | | | | | | | | | | | | | | | | | | | | | This patch updates all current APM82181 devices over to that "new LED naming scheme". This includes many updates to the device-tree: - dropped the deprecated, but beloved "label" property. - rename all DT leds node names to led-#. - add function and color properties. - utilized panic-indicator property. - dropped led- aliases (see below). migration scripts for all devices are included. For more information. See: <https://www.kernel.org/doc/html/latest/leds/leds-class.html> For the future: It looks like the color+function properties won over the dt-alias / label. This will need to be wired up into openwrt eventually. For APM821xx the situation is that all devices have a dedicated power and fault indicator. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: lzma-loader: fix & re-enable per-board CONFIG_BOARD_DEVChristian Lamparter2021-10-221-2/+5
| | | | | | | | | | | | | | | | | | | Back in the AR71XX days, the lzma-loader code could be customized based on the $BOARD variable. These would be passed as a compile-time -DCONFIG_BOARD_$DEVICE_MODEL flag to the compiler. Hence, the lzma-loader would be able to include device-specific fixups. Note: There's still a fixup for the TpLink TL-WR1043ND V1 found in the lzma-loader's board.c code. But since the days of AR71XX I couldn't find a forum post or bug reported. So, I left it as is to not break anything by enabling it. => If you have a TL-WR1043ND V1 and you have problem with the ethernet: let me know. Because otherwise, the fixup might simply no longer needed with ath79 and it can be removed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: MX60(W): re-enable + allow bigger future kernelsChristian Lamparter2021-10-222-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MX60's kernel is limited to 0x3EFC00 by the values in mkmerakifw.c. Since the initramfs method of loading the kernel seems to be working, this patch does away with the use of the mkmerakifw tool for the MX60(W). But this will go along with a change in u-boot as well. So before you upgrade, please attach the serial cable and perform: | setenv owrt510_boot run meraki_ubi owrt_bootargs\; run owrt_load1 owrt_bootkernel\; run owrt_load2 owrt_bootkernel | setenv bootcmd run owrt510_boot | saveenv Note: You won't be able to use older OpenWrt releases without switching the bootcmd back to owrt_boot! Note2: We are no longer compatible with older OpenWrt MX60 installs. the legacy BOARD_NAME and SUPPORTED_DEVICES can be dropped. This is because upgrades from older images are not possible without uboot env changes anymore. Also the bogus BLOCKSIZE value (which was set to 63k back then, in order to get the kernel properly aligned after the fdt + meraki header) can be set to the NANDs real value. The FDT size (which was needed for alignment) can now be slimmed down as well. Co-developed-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: MBL: HDD regulators overhaul for MBL DUOChristian Lamparter2021-10-221-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Takimata reported on the OpenWrt forum in thread [0], that his MyBook Live Duo wasn't booting OpenWrt 21.02 after upgrading from the previous OpenWrt 19.07. The last logged entries on his console |[ 0.531599] sata1-regulator GPIO handle specifies active low - ignored |[ 0.538391] sata0-regulator GPIO handle specifies active low - ignored |[ 0.759791] ata2: SATA link down (SStatus 0 SControl 300) |[ 0.765251] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |[ 5.909555] ata1.00: qc timeout (cmd 0xec) |[ 5.913656] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) |[ 6.231757] ata1: SATA link down (SStatus 0 SControl 300) This extract clearly showed that the HDD on which OpenWrt is installed, simply disappeared after the SATA power regulators had been initialized. The reason why this worked with OpenWrt 19.07 was because the kernel config symbol CONFIG_REGULATOR=y was not set in the target's config-4.14. (This shows that the MBL Single does differ from the DUO in that it does not have programmable power regulators for the HDDs.) [0] <https://forum.openwrt.org/t/21-02-0-and-snapshot-fail-to-boot-on-my-book-live-duo/106585> Reported-by: Takimata (forum) Tested-by: Takimata (forum) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: mikrotik: use 64 KiB SPI NOR erase sectorsRoger Pueyo Centelles2021-10-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes CONFIG_MTD_SPI_NOR_USE_4K_SECTORS from the default symbols for the ath79/mikrotik target. MikroTik devices hold some of their user-configurable settings in the soft_config partition, which is typically sized 4 KiB, of the SPI NOR flash memory. Previously, in the ar71xx target, it was possible to use 64 KiB erase sectors but also smaller 4 KiB ones when needed. This is no longer the case in ath79 with newer kernels so, to be able to write to these 4 KiB small partitions without erasing 60 KiB around, the CONFIG_MTD_SPI_NOR_USE_4K_SECTORS symbol was added to the defaults. However, this ended up making sysupgrade images which were built with 64 KiB size blocks not to keep settings (e.g., the files under /etc/config/) over the flashing process. Using 4 KiB erase sector size on the sysupgrade images (by setting BLOCKSIZE = 4k) allows keeping settings over a flashing process, but renders the process terribly slow, possibly causing a user to mistakenly force a manual device reboot while the process is still on- going. Instead, ditching the 4 KiB erase sectors for the default 64 KiB erase size provides normal SPI write speed and sysupgrade times, at the expense of not being able to modify the soft_config partition (which is rarely a required thing). An OpenWrt patch for MTD_SPI_NOR_USE_4K_SECTORS_LIMIT may once have allowed to use different per-partition erase sector sizes. Due to changes on recent kernels it now only works on a per-device basis. Also, partial eraseblock write can be performed in ath79 with kernels 5.4 and lower, by copying the blocks from the 64 KiB, erasing the whole sector and restoring those blocks not meant to be modified. A kernel bump had that patch broken for a long time, but got fixed in bf2870c. Note: the settings in the soft_config partition can be reset to their defaults by holding the reset button for 5 seconds (and less than 10 seconds) at device boot. Fixes: FS#3492 (sysupgrade […] loses settings...) Fixes: a66eee63368e (ath79: add mikrotik subtarget) Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* bcm53xx: bridge all LAN ports on Linksys EA9500Rafał Miłecki2021-10-221-1/+1
| | | | | | External switch ports need to be bridged too. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* tools/isl: update the download URLRui Salvaterra2021-10-211-1/+1
| | | | | | | | | isl.gforge.inria.fr has been dead since early this month [1]. Switch to libisl.sourceforge.io for the time being. [1] https://groups.google.com/g/isl-development/c/JGaMo2VUu_8 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* toolchain: switch packaged toolchain to tar.xzPaul Spooren2021-10-211-4/+5
| | | | | | | | Currently the tar.bz2 while ImageBuilder and SDK switched to tar.xz. Unify it for faster compression since it will make use of multi-threading. Signed-off-by: Paul Spooren <mail@aparcar.org>
* bcm53xx: switch to the upstream DSA-based b53 driverRafał Miłecki2021-10-215-77/+49
| | | | | | | | | | 1. Drop swconfig 2. Simplify network setup 3. Verify network config 4. Disable Buffalo WZR-900DHP for now - it misses ports definition Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-By: Christian Lamparter <chunkeey@gmail.com>
* bcm47xx: add kernel 5.10 supportRafał Miłecki2021-10-2121-1/+2295
| | | | | | | It's for *development* only as it doesn't work with lzma-loader due to bigger size. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* hostapd: ubus: fix uninitialized pointerDavid Bauer2021-10-211-1/+1
| | | | | | | This fixes passing a bogus non-null pointer to the ubus handler in case the transition request is rejected. Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 00:43:37 +0000