aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* toolchain/gcc: revert a faulty upstream commit that caused miscompiled codeFelix Fietkau2021-11-161-0/+160
| | | | | | This broke at least the OKLI loader, but possibly other things as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: improve ethernet performanceAleksander Jan Bajkowski2021-11-1514-0/+706
| | | | | | | | This commit contains a series of fixes for DMA. The burst length patch significantly improves Ethernet performance. Patches were tested on the xRX200 and xRX330. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* ltq-vdsl-fw: update w921v firmware download URLDaniel Golle2021-11-153-5/+5
| | | | | | | Update Telekom Speedport W921V firmware download URL. Contained TAPI and VDSL firmware blobs are identical. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add missing symbolStijn Tintel2021-11-151-0/+13
| | | | | | | Enabling KERNEL_FTRACE exposes the HIST_TRIGGERS triggers symbol. Add a build option for it to fix build failures with KERNEL_FTRACE enabled. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: set VARIANT=* for wpa-cli, hostapd-utilsEneas U de Queiroz2021-11-151-0/+2
| | | | | | | | | | | | | | | | | | | | 19aae94 [build: avoid rebuilds of unset VARIANT packages] builds packages defined without a VARIANT only once, using the first VARIANT defined in the Makefile. This caused problems with wpa-cli, as it is only built for variants that include supplicant support, and the first VARIANT defined may not build it. The same happens to hostapd-utils, which is not built for supplicant-only variants. To circumvent this, set VARIANT=* for both packages so that they get built for every defined variant. This should not cause spurious rebuilds, since tey are not a dependency of any other package defined in this Makefile. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* build: allow package to be built for all variantsEneas U de Queiroz2021-11-153-3/+3
| | | | | | | | | | | | This allows a package to be rebuilt for all different VARIANTs. To do so, set VARIANT=*. The wpa-cli package is not getting built after changes made by 19aae94 [build: avoid rebuilds of unset VARIANT packages], because wpa-cli is only built when compiling a variant that includes supplicant support, and the first selected variant may not build it. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* kernel: fix mac-address-increment patchAnsuel Smith2021-11-154-28/+48
| | | | | | | | | Fix mac address increment patch. Permit to overflow to the next byte and correctly calculate the incremented mac. Reported-by: Chen Minqiang <ptpt52@gmail.com> Fixes: d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to generic implementation") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: 5.10: backport explicit MAC06 disable patchMatthew Hagan2021-11-151-0/+47
| | | | | | | | | Backport of Ansuel Smith's "net: dsa: qca8k: make sure PAD0 MAC06 exchange is disabled", to ensure mac06 is disabled even if enabled by the bootloader. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* mxs: drop kernel 5.4 supportZoltan HERPAI2021-11-142-355/+0
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* mxs: switch to Kernel 5.10Paul Spooren2021-11-141-2/+2
| | | | Signed-off-by: Paul Spooren <mail@aparcar.org>
* lldpd: add reload triggerStijn Tintel2021-11-142-1/+5
| | | | | | | This is needed to reload the service when calling reload_config, if the UCI config has changed. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* lldpd: consolidate procd command linesStijn Tintel2021-11-142-3/+2
| | | | | | There is no need to have multiple lines for this. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* lldpd: bump to 1.0.13Stijn Tintel2021-11-141-2/+2
| | | | | | Fixes CVE-2021-43612. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* lantiq: fix mac address from nvmem-cellsMathias Kresin2021-11-142-2/+0
| | | | | | | | | | The devicetree property mac-address is expected to be set by the bootloader and has priority over the nvmem supplied one. Drop the mac-address address property from the dtsi files, to let the mac address from nvmem-cells get used. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: reduce stack sizeMathias Kresin2021-11-141-0/+56
| | | | | | | | | | | | | | | On lantiq a lot of stuff expects to be loaded to and executed at 0x80002000, including our own second stage bootloader. For all build u-boots, the initial stack pointer is at 0x80008000. After loading data to 0x80002000, every further stack operation corrupts the loaded code. Set the initial stack pointer to 0x80002000, to not overwrite code loaded in memory. A stack of 0x2000 bytes has been proven as enough in all done tests. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: danube: fix SPL bootMathias Kresin2021-11-141-0/+34
| | | | | | | | | | | | | | | | On danube we only have 0x6800 bytes of usable SRAM. Everything behind can't be written to and a SPL u-boot locks up during boot. Since it's a hard to debug issue and took me more than two years to fix it, I consider it worth to include fix albeit SPL u-boots are not build in OpenWrt. I faced the issue while trying to shrink the u-boot to 64K since some boards only have an u-boot partition of that size from the days ifx-uboot was used. Signed-off-by: Mathias Kresin <dev@kresin.me> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* uboot-lantiq: fix out of bounds cache invalidateMathias Kresin2021-11-141-0/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With gcc10 the variables are placed more tightly to each other, which uncovers a long existing bug in the lantiq DMA code. It can be observed when using tftpboot with the filename parameter, which gets reset during the tftpboot execution. NetRxPackets[] points to cache line size aligned addresses. In ltq_eth_rx_packet_align() the address NetRxPackets[] points to is increased by LTQ_ETH_IP_ALIGN and the resulting not cache aligned address is used further on. While doing so, the length/size is never updated. The "not cache aligned address" + len/size for a cache aligned address is passed to invalidate_dcache_range(). Hence, invalidate_dcache_range() invalidates the next 32 bit as well, which flashes the BootFile variable as well. variable BootFile is at address: 0x83ffe12c NetRxPackets[] points to 0x83ffdb20 (len is 0x600) data points to: 0x83ffdb22 (len is 0x600) ltq_dma_dcache_inv: 0x83ffdb22 (for len 0x600) invalidate_dcache_range: 0x83ffdb20 to 0x83ffe120 (size: 32) invalidate_dcache_range: 0x83ffdb20 to 0x83ffdb40 (Bootfile: a.bin) ... invalidate_dcache_range: 0x83ffe100 to 0x83ffe120 (Bootfile: a.bin) invalidate_dcache_range: 0x83ffe120 to 0x83ffe140 (Bootfile: ) In ltq_dma_tx_map() and ltq_dma_rx_map() the start address passed to ltq_dma_dcache_wb_inv() is incorrect. By considering the offset, the start address passed to flush_dcache_range() is always aligned to 32, 64 or 128 bytes dependent on configured DMA burst size. Fixes: FS#4113 Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: danube: fix hanging lzma kernel uncompressionMathias Kresin2021-11-141-0/+48
| | | | | | | | | | | | | | | | | | | | | | | At least since gcc 7.3.0 (OpenWrt 18.06) lwr/lwl are used in the assembly of LzmaProps_Decode. While the decission made by the compiler looks perfect fine, it triggers some obscure hang on lantiq danube-s v1.5 with MX29LV640EB NOR flash chips. Only if the offset 1 is used, the hang can be observed. Using any other offset works fine: lwl s0,0(a1) - s0 == 0x6d000080 lwl s0,1(a1) - hangs lwl s0,2(a1) - s0 == 0x0080xxxx lwl s0,3(a1) - s0 == 0x80xxxxxx It isn't clear whether it is a limitation of the flash chip, the EBU or something else. Force 8bit reads to prevent gcc optimizing the read with lwr/lwl instructions. Signed-off-by: Mathias Kresin <dev@kresin.me>
* qosify: add missing alias support in the init scriptFelix Fietkau2021-11-141-0/+18
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: fix missing includeChristian Lamparter2021-11-141-0/+1
| | | | | | | | | | | | This patch fixes a blunder of mine. The include needed for LED_COLOR_ID_BLUE property is missing. This caused the builds to fail with: |Error: arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi:91.13-14 syntax error |FATAL ERROR: Unable to parse input tree Fixes: 12d33d388c52 ("ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0)") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: reenable Zyxel NBG6617 by defaultChristian Lamparter2021-11-141-1/+0
| | | | | | | | | The Zyxel NBG6617 already uses lzma to compress the kernel. A local build with every module enabled (either as =Y or =M) ended produced a 3058 KiB kernel (the kernel partition is 4MiB). It booted just fine, let's reenable the device. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0)Richard Yu2021-11-1410-1/+417
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | P&W R619AC is a IPQ4019 Dual-Band AC1200 router. It is made by P&W (p2w-tech.com) known as P&W R619AC but marketed and sold more popularly as G-DOCK 2.0. Specification: * SOC: Qualcomm Atheros IPQ4019 (717 MHz) * RAM: 512 MiB * Flash: 16 MiB (NOR) + 128 MiB (NAND) * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) * Wireless: - 2.4 GHz b/g/n Qualcomm Atheros IPQ4019 - 5 GHz a/n/ac Qualcomm Atheros IPQ4019 * USB: 1 x USB 3.0 * LED: 4 x LAN, 1 x WAN, 2 x WiFi, 1 x Power (All Blue LED) * Input: 1 x reset * 1 x MicroSD card slot * Serial console: 115200bps, pinheader J2 on PCB * Power: DC 12V 2A * 1 x Unpopulated mPCIe Slot (see below how to connect it) * 1 x Unpopulated Sim Card Slot Installation: 1. Access to tty console via UART serial 2. Enter failsafe mode and mount rootfs <https://openwrt.org/docs/guide-user/troubleshooting/failsafe_and_factory_reset> 3. Edit inittab to enable shell on tty console `sed -i 's/#ttyM/ttyM/' /etc/inittab` 4. Reboot and upload `-nand-factory.bin` to the router (using wget) 5. Use `sysupgrade` command to install Another installation method is to hijack the upgrade server domain of stock firmware, because it's using insecure http. This commit is based on @LGA1150(at GitHub)'s work <https://github.com/LGA1150/openwrt/commit/a4932c8d5a275d1fb4297bd20ec03f9270a45d1c> With some changes: 1. Added `qpic_bam` node in dts. I don't know much about this, but I observed other dtses have this node. 2. Removed `ldo` node under `sd_0_pinmux`, because `ldo` cause SD card not working. This fix is from <https://github.com/coolsnowwolf/lede/commit/51143b4c7571f717afe071db60bbb4db1532cbf2> 3. Removed the 32MB NOR variant. 4. Removed `cd-gpios` in `sdhci` node, because it's reported that it makes wlan2g led light up. 5. Added ethphy led config in dts. 6. Changed nand partition label from `rootfs` to `ubi`. About the 128MiB variant: The stock bootloader sets size of nand to 64MiB. But most of this devices have 128MiB nand. If you want to use all 128MiB, you need to modify the `MIBIB` data of bootloader. More details can be found on github: <https://github.com/openwrt/openwrt/pull/3691#issuecomment-818770060> For instructions on how to flash the MIBIB partition from u-boot console: <https://github.com/openwrt/openwrt/pull/3691#issuecomment-819138232> About the Mini PCIe slot: (from "ygleg") "The REFCLK signals on the Mini PCIe slot is not connected on this board out of the box. If you want to use the Mini PCIe slot on the board, you need to (preferably) solder two 0402 resistors: R436 (REFCLK+) and R444 (REFCLK-)..." This and much more information is provoided in the github comment: <https://github.com/openwrt/openwrt/pull/3691#issuecomment-968054670> Signed-off-by: Richard Yu <yurichard3839@gmail.com> Signed-off-by: DENG Qingfang <dqfext@gmail.com> [Added comment about MIBIB+128 MiB variant. Added commit message section about pcie slot. Renamed gpio-leds' subnodes and added color, function+enum properties.] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* scripts/env: fix env for git conf init.defaultBranch not set to "master"Arne Zachlod2021-11-131-1/+1
| | | | | | | | | Since version 2.28, git has a config option init.defaultBranch to set the name of the first branch created with git init. The env script expects this name to be "master". This commit sets the initial branch name to "master" instead of using the git configured one. Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
* firewall4: update to latest Git HEADPaul Spooren2021-11-131-4/+4
| | | | | | | | | eb0a3ee fw4.uc: Do not quote port ranges c5a8e3e tests: adapt test to new ICMP print logic Also start using $(AUTORELEASE) Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: stage2: improve /proc/*/stat parserDaniel Golle2021-11-131-2/+5
| | | | | | | | | | | Simply reading /proc/*/stat as a space-separated string will not work as the process name may itself contain spaces. Hence we must match on the '(' and ')' characters around the process name and can then handle the remaining string as space-separated values. This fixes shell error messages which have been popping up the console due to spaces in process names being interpreted as field separators. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.79Rui Salvaterra2021-11-133-7/+7
| | | | | | | | | Manually rebased: generic/backport-5.10/810-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch Tested-by: John Audia <graysky@archlinux.us> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mac80211: Fix deadlock when configuring wifiHauke Mehrtens2021-11-131-7/+9
| | | | | | | | | | | | | | | | | | | | | The nl80211_set_wiphy() function was changed between kernel 5.11 and 5.12 to take the rdev->wiphy lock which should be freed at the end again. The 500-mac80211_configure_antenna_gain.patch added some code which just returned in some cases without unlocking. This resulted in a deadlock with brcmfmac. This patch fixes this by also jumping to the out label in case we want to leave the function. This fixes a hanging system when brcmfmac is in use. I do not know why we do not see this with other driver. The kernel returns very useful debug details when setting these OpenWrt configuration options: CONFIG_KERNEL_DETECT_HUNG_TASK=y CONFIG_KERNEL_PROVE_LOCKING=y Fixes: FS#4122 Fixes: b96c2569ac76 ("mac80211: Update to version 5.12.19-1") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iproute2: update to 5.15Russell Senior2021-11-132-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | from https://git.kernel.org/pub/scm/network/iproute2/iproute2.git changes since 5.14.0: ad3a118f rdma: Fix SRQ resource tracking information json 7a235a10 man: devlink-port: fix pfnum for devlink port add 229eaba5 uapi: pickup fix for xfrm ABI breakage a500c5ac lib/bpf: fix map-in-map creation without prepopulation 7c032cac man: devlink-port: remove extra .br 04ee8e6f man: devlink-port: fix style 14802d84 man: devlink-port: fix the devlink port add synopsis 897772a7 cmd: use spaces instead of tabs for usage indentation e7a98a96 mptcp: unbreak JSON endpoint list 2f5825cb lib: bpf_legacy: fix bpffs mount when /sys/fs/bpf exists d756c08a tc/f_flower: fix port range parsing 92e32f77 uapi: updates from 5.15-rc1 e7e0e2ce iptuntap: fix multi-queue flag display deef844b man: ip-link: remove double of a3272b93 configure: restore backward compatibility ceba5930 tree-wide: fix some typos found by Lintian 7a705242 ip: remove leftovers from IPX and DECnet 8ab1834e uapi: update headers from 5.15 merge 6d0d35ba ip/bond: add lacp active support 926ad641 Update kernel headers c730bd0b ip/tunnel: always print all known attributes df8912ed ipioam6: use print_nl instead of print_null 7e7270bb tc/skbmod: Introduce SKBMOD_F_ECN option 86c596ed IOAM man8 2d83c710 New IOAM6 encap type for routes f0b3808a Add, show, link, remove IOAM namespaces and schemas acbdef93 Import ioam6 uapi headers 2d6fa30b Update kernel headers 508ad89c ipneigh: add support to print brief output of neigh cache in tabular format * update patch 170-ip_tiny.patch to accomodate ioam. Signed-off-by: Russell Senior <russell@personaltelco.net>
* qosify: add default alias sectionsFelix Fietkau2021-11-121-1/+13
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: update to the latest versionFelix Fietkau2021-11-121-3/+3
| | | | | | | | 0750f2b4d329 README: dnsmasq integration is complete 8e48d0b0cbba bpf: add initial support for splitting map dscp value into ingress and egress bfc2cafe2a8c map: add support for defining aliases Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: fix the dynamic dns object names patchRui Salvaterra2021-11-121-7/+7
| | | | | | | | | We can't use booleans, since we're not including stdbool.h. Use integers instead. Fixes: 0b79e7c01e ("dnsmasq: generate the dns object name dynamically") Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: mt7622: bpi-r64: rewrite MMC uImage.FIT sysupgradeDaniel Golle2021-11-122-17/+14
| | | | | | | | | | Similar to mt7623, also no longer use 'blockdev' and stop relying on in-kernel partition parsers. Instead, strip off all metadata using 'fwtool' while writing the firmware image and scrape the number of blocks written from 'dd', then use that block offset to stash the configuration backup. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: re-write sysupgrade uImage.FIT on MMCDaniel Golle2021-11-122-16/+13
| | | | | | | | | | | | | | Re-reading the partition table doesn't work reliably, it fails if anything on the device is still in use and it's not trivial to prevent every possible case of a block device still being in use somehow. Therefore, instead of relying on the in-kernel partition parser to know where to write the configuration backup, use OpenWrt's format-agnostic fwtool to strip off all metadata from the image and count its blocks while writing. In that way we can know where to write the config backup without needing the kernel to parse the MBR and FIT structures. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: add ubus acl to allow calls to hotplug.tftp objectDaniel Golle2021-11-121-0/+3
| | | | | | | | dnsmasq may call hotplug.dhcp, hotplug.neigh and hotplug.tftp. Only the first two callees were listed in the ACL, so add missing hotplug.tftp. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* include/bpf.mk: fix typo in clang version checkFelix Fietkau2021-11-121-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* procd: update to git HEADDaniel Golle2021-11-111-3/+3
| | | | | | | | | | 9d1431e jail: allow passing environment variable to procd jailed process Fixes dnsmasq in ujail which needs USER_SCRIPT env variable to be passed to jailed process. Reported-by: Bastian Bittorf <bb@npl.de> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: fix queue selection issueFelix Fietkau2021-11-101-0/+37
| | | | | | | | | When __ieee80211_select_queue is called, skb->cb has not been cleared yet, which means that info->control.flags can contain garbage. In some cases this leads to IEEE80211_TX_CTRL_DONT_REORDER being set, causing packets marked for other queues to randomly end up in BE instead. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* nat46: update to latest git HEADHans Dedecker2021-11-101-3/+3
| | | | | | | 1fdf2a3 Fix kernel panic due to device deletion (#29) e7b48d1 add the mutex lock for create/delete/config/insert nat46 devices to fix nat46 module crash issues. (#28) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: generate the dns object name dynamicallyFelix Fietkau2021-11-101-5/+17
| | | | | | Fixes an issue with running multiple dnsmasq instances Signed-off-by: Felix Fietkau <nbd@nbd.name>
* include/bpf.mk: check minimum required clang versionFelix Fietkau2021-11-091-0/+10
| | | | | | | Avoid spurious runtime errors caused by loading eBPF modules built with an old clang version Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: add match_tag for --dhcp-hostPaul Fertser2021-11-091-3/+8
| | | | | | | | | | | | | | | | | | | A set of tags can be specified for --dhcp-host option to restrict the assignment to the requests which match all the tags. Example usage: config vendorclass option networkid 'udhcp' option vendorclass 'udhcp' config host option mac '*:*:*:*:*:*' list match_tag 'switch.10' list match_tag 'udhcp' option ip '192.168.25.10' Signed-off-by: Paul Fertser <fercerpav@gmail.com>
* qosify: mark as nonsharedFelix Fietkau2021-11-091-0/+1
| | | | | | The SDK does not have the LLVM toolchain yet Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm4908: switch to kernel 5.10Rafał Miłecki2021-11-091-2/+1
| | | | | | | | Tested on: 1. Asus GT-AC5300 2. Netgear R8000P Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: add watchdog supportRafał Miłecki2021-11-096-0/+154
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: refresh kernel configsRafał Miłecki2021-11-092-16/+8
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* qosify: move files to /etc/qosifyFelix Fietkau2021-11-082-4/+4
| | | | | | | Now that wildcard matching is supported, this makes it easier for packages to supply their own qosify rules Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: update to the latest versionFelix Fietkau2021-11-081-3/+3
| | | | | | | | 737970946bc0 map: default to fnmatch matching for dns patterns. support regex via leading / b56b112e62e2 ubus: fix crash caused by missing static keyword 3a420e272c18 qosify: support wildcards in classifier filenames Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: add missing dependencyFelix Fietkau2021-11-081-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm4908: fix b53 regression regarding RGMII reg(s)Rafał Miłecki2021-11-083-2/+48
| | | | | | | This fixes: [ 35.308550] WARNING: CPU: 0 PID: 230 at bcm_sf2_reg_rgmii_cntrl.isra.0+0x84/0x90 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: drop patch for downstream swconfig-based b53Rafał Miłecki2021-11-081-53/+0
| | | | | | | It isn't used anymore so there is no need to hack CPU port. Upstream (DSA-based) b53 also supports all switch ports just fine. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 11:31:53 +0000