aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.145John Audia2022-10-048-52/+10
| | | | | | | | | | | | | | | Manually rebased: hack-5.10/780-usb-net-MeigLink_modem_support.patch Removed upstreamed: patches-5.10/110-gpio-mpc8xxx-Fix-support-for-IRQ_TYPE_LEVEL_LOW-flow.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.145&id=24196210b198e8e39296e277bb93b362aa207775 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 8fe67fae1d619467b2b3300178d4309f17cfdb54)
* kernel: bump 5.10 to 5.10.144John Audia2022-10-042-3/+3
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit eff4f8b2f0a2900c945c21c8183d1faa0ac35ec1)
* ramips: fix switch setup for ASUS RT-AX53UMatthias Schiffer2022-10-032-5/+1
| | | | | | | | The device has only 1 WAN + 3 LAN ports. Remove "lan4" interface corresponding to the non-existing port. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> (cherry picked from commit 149fc3a269b435483b31df03d6fd9679286cf9e7)
* uboot-mvebu: backport LibreSSL patches for older version of LibreSSLJosef Schlehofer2022-10-032-0/+55
| | | | | | | | | | | | | | If you would like to compile the newest version of U-boot together with the stable OpenWrt version, which does not have LibreSSL >= 3.5, which was updated in the master branch by commit 5451b03b7ceb2315445c683fe174e28bbdd49c2f ("tools/libressl: bump to v3.5.3"), then you need these two patches to fix it. They are backported from U-boot repository. This should be backported to stable OpenWrt versions. Reported-by: Michal Vasilek <michal.vasilek@nic.cz> Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 185541f50ff59c0a5e0663ad612f0f5eb31926cf)
* uboot-mvebu: backport patch to fix compilation on non glibc systemJosef Schlehofer2022-10-031-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This issue was reported by @paper42, who is using Void Linux with musl to compile OpenWrt and its packages and found out it is not possible to compile U-boot for Turris Omnia (neither any other). It fixes following output: ``` HOSTCC tools/kwboot tools/kwboot.c: In function 'kwboot_tty_change_baudrate': tools/kwboot.c:662:6: error: 'struct termios' has no member named 'c_ospeed' 662 | tio.c_ospeed = tio.c_ispeed = baudrate; | ^ tools/kwboot.c:662:21: error: 'struct termios' has no member named 'c_ispeed' 662 | tio.c_ospeed = tio.c_ispeed = baudrate; | ^ tools/kwboot.c:690:31: error: 'struct termios' has no member named 'c_ospeed' 690 | if (!_is_within_tolerance(tio.c_ospeed, baudrate, 3)) | ^ tools/kwboot.c:693:31: error: 'struct termios' has no member named 'c_ispeed' 693 | if (!_is_within_tolerance(tio.c_ispeed, baudrate, 3)) | ``` Tested-by: Michal Vasilek <michal.vasilek@nic.cz> Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 9c7472950b01c5b3a461f4e29b3b62bac9e35b46)
* ramips: enable LZMA loader to fix Linksys RE6500 bootMark King2022-10-031-0/+1
| | | | | | | | | | | | At some point after 21.02.3 and before 22.03.0, the size limits of the Linksys RE6500 were reached and prevent booting from the 22.03.0 release or builds of current SNAPSHOT. This patch allows builds of master to boot again and has been tested on my device. Fixes: #8577 Signed-off-by: Mark King <mark@vemek.co> (cherry picked from commit bf5b1a53d4ff3f1d742f9ece1ab16555280417ec)
* tools/meson: backport WSL2 fixRosen Penev2022-10-031-0/+21
| | | | | | | | For some reason, Microsoft's Plan9 driver returns IOError on missing file. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 875e17774bafb132a93d66f1d7b2c6a2deec2030)
* firmware: intel-microcode: update to 20220809Christian Lamparter2022-10-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Debian's changelog by Henrique de Moraes Holschuh <hmh@debian.org>: * New upstream microcode datafile 20220809 * Fixes INTEL-SA-00657, CVE-2022-21233 Stale data from APIC leaks SGX memory (AEPIC leak) * Fixes unspecified errata (functional issues) on Xeon Scalable * Updated Microcodes: sig 0x00050653, pf_mask 0x97, 2022-03-14, rev 0x100015e, size 34816 sig 0x00050654, pf_mask 0xb7, 2022-03-08, rev 0x2006e05, size 44032 sig 0x000606a6, pf_mask 0x87, 2022-04-07, rev 0xd000375, size 293888 sig 0x000706a1, pf_mask 0x01, 2022-03-23, rev 0x003c, size 75776 sig 0x000706a8, pf_mask 0x01, 2022-03-23, rev 0x0020, size 75776 sig 0x000706e5, pf_mask 0x80, 2022-03-17, rev 0x00b2, size 112640 sig 0x000806c2, pf_mask 0xc2, 2022-03-19, rev 0x0028, size 97280 sig 0x000806d1, pf_mask 0xc2, 2022-03-28, rev 0x0040, size 102400 sig 0x00090672, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 sig 0x00090675, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 sig 0x000906a3, pf_mask 0x80, 2022-06-15, rev 0x0421, size 216064 sig 0x000906a4, pf_mask 0x80, 2022-06-15, rev 0x0421, size 216064 sig 0x000a0671, pf_mask 0x02, 2022-03-17, rev 0x0054, size 103424 sig 0x000b06f2, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 sig 0x000b06f5, pf_mask 0x03, 2022-06-07, rev 0x0022, size 216064 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit bb73828b89def128f26ae1cdff0d08569d261f1b)
* toolchain: Include ./include/fortify for external musl toolchainHauke Mehrtens2022-10-031-0/+1
| | | | | | | | | | | | | | | When building with an external toolcahin with musl also include ./include/fortify by default. This is also done when we build with the internal toolchain using musl libc. Without this extra include the fortify source feature is not working when using an external musl toolchain. All binaries were compiled without fortify source when an external musl toolchain was used. All binaries release done by the OpenWrt project use the internal toolcahin where fortify source is working. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit b21ddbfa18cd1e437e31dc0fa29408721a186c2a)
* toolchain: Select USE_SSTRIP with external musl toolchainHauke Mehrtens2022-10-032-2/+0
| | | | | | | | | | When we use the internal toolchain USE_SSTRIP will be selected by default for musl libc and USE_STRIP when glibc is used. Do the same when an external toolchain is used. USE_GLIBC will also be set for external toolchain builds based on the EXTERNAL_TOOLCHAIN_LIBC_USE_GLIBC setting. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 9403810c020cca136149973a3929bf77a1f501aa)
* scripts: ext-toolchain: add support for muslChristian Marangi2022-10-031-2/+12
| | | | | | | | | Openwrt now supports only glibc and musl. Add support for musl and rework the libc check to handle the new config flags and correctly compile package basend on that. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 7be01fe13b4517e5edb8a4818f437d60144cdcb4)
* scripts: ext-toolchain: add support for info.mk in probe_ccChristian Marangi2022-10-031-0/+7
| | | | | | | | Openwrt generate info.mk that contains the libc type. For probe_cc check if the file exist and parse directly it for LIBC type. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 75311977f5ff64b491cb57ac713d75e0e410d786)
* scripts: ext-toolchain: actually probe libc type on config generationChristian Marangi2022-10-031-0/+1
| | | | | | | | | Currently we never call probe_cc before config generation, this cause the script to never actually detect the correct libc type. Call probe_cc before config generation to correctl set the .config file. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit ddeabc75ebe3151ff7da302cb1aae702b3ad7eba)
* scripts: ext-toolchain: add option to overwrite configChristian Marangi2022-10-031-4/+18
| | | | | | | | | It can be useful to overwrite an already generated config. Option are simply added at the end of the config and make defconfig will overwrite the relevant option with the new one. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit f4dd18ca39c42a324e34633c8ee553717531bc3b)
* scripts: ext-toolchain: fix wrong prefix in print_config generationChristian Marangi2022-10-031-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The parsed prefix in print_config is wrong and this produce broken generated .config that won't work with any external toolchain. Currently the prefix from a CC of 'arm-openwrt-linux-muslgnueabi-gcc-12.1.0' produce a prefix 'arm-openwrt-linux-muslgnueabi-gcc-' This is wrong as the real prefix should be 'arm-openwrt-linux-muslgnueabi-' This is probably caused by a change in how the toolchain is now handled that now append also the gcc version. Probably in ancient days the version wasn't part of the name and the prefix generation stripped the '-gcc' instead of the gcc version. Fix this and correctly strip the gcc version and the gcc suffix to correctly call toolchain bins. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 53c293262fce844c8291ab82e6726a8489d3c57b)
* rules_mk: don't include wrapped bin with external toolchainsChristian Marangi2022-10-031-1/+0
| | | | | | | | | | | | Don't add wrapped bin to the TARGET_PATH as it does cause compilation error. cmake.mk will use the "command -v" and will use the wrapped bin instead of the external toolchain bin as they have the same name and command will select the first result. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit a90eabf60255773231ed0259e5da5eb6a36fe9ce)
* rules_mk: use gcc versions for external toolchainVincent Wiemann2022-10-031-10/+3
| | | | | | | | | | | | When using the OpenWrt toolchain as an external toolchain the build failed due to missing LTO support. By choosing the GCC wrappers of the tools this commit makes sure that the LTO-enabled executables are being used. Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com> [ wrap the commit description to 72 char ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 2555ffb4536e2727465e9a0d426ad3c4f1ef003a)
* bcm53xx: backport clk driver fix for DT nodes namesRafał Miłecki2022-10-032-62/+72
| | | | | | | It allows dropping downstream patch renaming DT nodes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 77d9cce604d32005ddb90e91c6cc9b9cf35068d7)
* ath79: fix LibreRouter-v1 watchdog and poe_passSantiago Piccinini2022-10-021-0/+4
| | | | | | | Watchdog and poe_passthrough gpios require the jtag disabled. Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net> (cherry picked from commit 2ad949b11dbaa4c634868d55a4452d5a558776bd)
* build: fix warnings from grepChris Osgood2022-09-291-1/+1
| | | | | | | | | | Fixes build warnings when using newer versions of grep. Signed-off-by: Chris Osgood <chris_github@functionalfuture.com> Tested-by: Georgi Valkov <gvalkov@gmail.com> (cherry picked from commit c5e167e0d6075c46ca92c30b425c4dcb05fec5ed) [ fix conflict error ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* Makefile: fix stray \ warnings with grep-3.8Nick Hainke2022-09-291-1/+1
| | | | | | | | | | | | | | | | | | | We simply grep for "/usr". So no need for "-E" or "\/". Furthermore, in the new grep versions this creates warnings. As written in the grep-3.8 announcement: Regular expressions with stray backslashes now cause warnings, as their unspecified behavior can lead to unexpected results. For example, '\a' and 'a' are not always equivalent <https://bugs.gnu.org/39678>. Fixes warnings in the form of: grep: warning: stray \ before / Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit a29d3bc48c40c6a2a93ae1806bea2ac26455cdbb) [ fix conflict error ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* build: fix issues with targets installed via feedsFelix Fietkau2022-09-273-5/+6
| | | | | | | | - fix including modules.mk when a target is being replaced - fix calling make targets from target/linux Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 3a8825ad6acbf18b2b472ace56be58868af78be7)
* build: fix including modules.mk for targets pulled in from feedsFelix Fietkau2022-09-271-1/+2
| | | | | | Fixes: ebc36ebb2349 ("scripts/feeds: install targets to target/linux/feeds and support overriding") Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 00094efec33f07c9dc16cce23be492430c40b3cc)
* mpc85xx: add patch to fix gpio mpc8xxxJosef Schlehofer2022-09-241-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backports Linux kernel patch [1] for kernel 5.10 where it applies cleanly. This was tested on CZ.NIC Turris 1.1 router running OpenWrt 22.03 release. Before: - In /var/log/messages: ``` [ 16.392988] lm90 0-004c: cannot request IRQ 48 [ 16.398280] lm90: probe of 0-004c failed with error -22 ``` - Sensors does not work: ``` root@turris:~# sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. ``` After: ``` root@turris:/# sensors sa56004-i2c-0-4c Adapter: MPC adapter (i2c@3000) temp1: +44.0°C (low = +0.0°C, high = +70.0°C) (crit = +85.0°C, hyst = +75.0°C) temp2: +73.8°C (low = +0.0°C, high = +70.0°C) ALARM (HIGH) (crit = +85.0°C, hyst = +75.0°C) ``` [1] https://lore.kernel.org/linux-gpio/20220906105431.30911-1-pali@kernel.org/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 2f496c34b6dfbedbfbff8d2ade5d629f096e40bd) (c&p commit ID from openwrt's master) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: fix fw_setsysWenli Looi2022-09-231-1/+1
| | | | | | | | | | This change was included in the original pull request but later omitted for some reason: https://github.com/openwrt/openwrt/pull/4936 Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> (cherry picked from commit 4cccea02a60aee0dd77c4db35672c92e2fe384a1)
* kernel: add missing symbolStijn Tintel2022-09-221-0/+5
| | | | | | | | Enabling KERNEL_KPROBES exposes KERNEL_BPF_KPROBE_OVERRIDE. Add a build option for it to fix build failures with KERNEL_KPROBES enabled. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 500c37c56ff60b46c30bb0ea7c92676bea23331a)
* bcm4908: fix -EPROBE_DEFER support in bcm4908_enetRafał Miłecki2022-09-212-1/+58
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1722e23ffcf9038114142a2129c29eb3cdec8ff9)
* kernel: update U-Boot NVMEM driverRafał Miłecki2022-09-213-0/+59
| | | | | | | | 1. Fix casting 2. Support DT-defined variables Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 5652f378c6c607f99a15e6472cdca46c9c4b6162)
* bcm4908: backport mtd parser for Broadcom's U-Boot partitionRafał Miłecki2022-09-212-0/+138
| | | | | | | | Broadcom's U-Boot contains environment data blocks. They need to be found (offsets aren't predefined) to access env variables. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 137149847d0f374515f38952ce0986b03a97f2e4)
* mediatek: fix Unifi 6LR network configStijn Tintel2022-09-201-2/+1
| | | | | | | | | | | | | | | | | When the v1 and v2 variants of the U6LR were introduced, the board network config was not adapted to the new device names. Due to this, the wrong network config is applied during initial boot. The resulting config has lan, wan and a switch, while this device only has a single ethernet interface without a switch. Fix this by using a wildcard that matches all the variants. Fixes: 15a02471bb85 ("mediatek: new target mt7622-ubnt-unifi-6-lr-v1") Fixes: 5c8d3893a78f ("mediatek: new target ubnt_unifi-6-lr-v1-ubootmod") Fixes: 31d86a1a1192 ("mediatek: add Ubiquiti UniFi 6 LR v2 targets") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 117f41ee95ec445dce5ab9332bc27a6311747c0d)
* mpc85xx: fix unset kernel symbolsDavid Bauer2022-09-201-0/+2
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: rt2x00: experimental improvements for MT7620 wifiDaniel Golle2022-09-1940-498/+1455
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Serge Vasilugin reports: To improve mt7620 built-in wifi performance some changes: 1. Correct BW20/BW40 switching (see comments with mark (1)) 2. Correct TX_SW_CFG1 MAC reg from v3 of vendor driver see https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 3. Set bbp66 for all chains. 4. US_CYC_CNT init based on Programming guide, default value was 33 (pci), set chipset bus clock with fallback to cpu clock/3. 5. Don't overwrite default values for mt7620. 6. Correct some typos. 7. Add support for external LNA: a) RF and BBP regs never be corrected for this mode b) eLNA is driven the same way as ePA with mt7620's pin PA but vendor driver explicitly pin PA to gpio mode (for forrect calibration?) so I'm not sure that request for pa_pin in dts-file will be enough First 5 changes (really 2) improve performance for boards w/o eLNA/ePA. Changes 7 add support for eLNA Configuration w/o eLAN/ePA and with eLNA show results tx/rx (from router point of view) for each stream: 35-40/30-35 Mbps for HT20 65-70/60-65 Mbps for HT40 Yes. Max results for 2T2R client is 140-145/135-140 with peaks 160/150, It correspond to mediatek driver results. Boards with ePA untested. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [directly include v3 of the patchset submitted upstream] (cherry picked from commit 31a6605de04218e1c04bd5c2436c24d7d1c07506) (cherry picked from commit e785ca05e9f0502894772f5df92192b816ba5d7c) (cherry picked from commit 412fcf3d4400f84551f3ead0514834c62d94a251)
* mac80211: rt2x00: fix typoSungbo Eo2022-09-192-5/+3
| | | | | | | Add missing semicolon and refresh patches. Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit d826c91704d2baa5e389c225791740e4c61d62c4)
* mac80211: add patch descriptions to rt2x00 patchesDaniel Golle2022-09-186-1/+76
| | | | | | | | Prepare patches for sending upstream by adding patch descriptions generated from the original OpenWrt commits adding each patch. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit d4feb66048f6a8f387eedfb162a1184cdae9d756)
* mediatek: fix ledbar of UniFi 6 LR when running custom U-BootDaniel Golle2022-09-181-1/+2
| | | | | | | | | | | The RGB LED of the UniFi 6 LR v1 doesn't work when using the Openwrt- built U-Boot. This is because the vendor loader resets the ledbar controller while our U-Boot doesn't care. Add reset-gpio so the ledbar driver in Linux will always reset the ledbar controller. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 0b5cf952cf5b70d3af2424d05b15ce2730a3dc11)
* ramips: add support for Ubiquiti UniFi FlexHDSven Wegener2022-09-184-0/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- - SoC: MediaTek MT7621AT with 128 MiB RAM and 32 MiB Flash - Wi-Fi: MediaTek MT7603 (b/g/n, 2x2) and MediaTek MT7615 (ac, 4x4) - Bluetooth: CSR8811 (internal USB, install kmod-bluetooth) Installation ------------ 1. Connect to the booted device at 192.168.1.20 using username/password "ubnt". 2. Update the bootloader environment. $ fw_setenv devmode TRUE $ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr); fdt rm /signature; bootubnt" $ fw_setenv bootcmd "run boot_openwrt" 3. Transfer the OpenWrt sysupgrade image to the device using SCP. 4. Check the mtd partition number for bs / kernel0 / kernel1 $ cat /proc/mtd 5. Set the bootselect flag to boot from kernel0 $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock4 6. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1 $ dd if=openwrt.bin of=/dev/mtdblock6 $ dd if=openwrt.bin of=/dev/mtdblock7 7. Reboot the device. It should boot into OpenWrt. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 820f0c07c544652c1c53a45262a481ac5dbe139b)
* ath79: Make patches apply againDaniel Golle2022-09-182-13/+13
| | | | | | | | | | The patch adding support for LEDs connected to a reset controller did not apply any more, refresh it on top of current master. Fixes: 53fc987b2552 ("generic: move ledbar driver from mediatek target") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 76fc277917fc847892dbbf525aea9f90a035d296)
* generic: move ledbar driver from mediatek targetSven Wegener2022-09-183-3/+4
| | | | | | | This moves the ledbar driver to generic, to be also used by the ramips target. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 53fc987b25524c28525313347f0e2e5653dce43c)
* mediatek: add led countSven Wegener2022-09-181-1/+7
| | | | | | | | | | The LEDs connected to the MCU are so-called smart LEDs and their signal is daisy-chained. Because of this, the MCU needs to be told how many LEDs are connected. It also means the LEDs could be individually controlled, if the MCU has a command for this. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 76198e8f09a607c6aca2621f59d7a4cd7f6653e3)
* mediatek: add initialization after resetSven Wegener2022-09-181-0/+14
| | | | | | | | | During GPIO initialization the pin state flips and triggers a reset of the ledbar MCU. It needs to be moved through an initialization sequence before working correctly. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 013a956f086dc5d88f6e9cbd852ed4d900d436e0)
* mediatek: add support for reset gpioSven Wegener2022-09-181-0/+26
| | | | | | | | Some versions of the ledbar MCU have a reset pin. It needs to be correctly initialized or we might keep the MCU in reset state. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 84e4bbf5f049cdb862eb25c446bd6973ed4238aa)
* mediatek: support reading more than one byte of responseSven Wegener2022-09-181-7/+8
| | | | | | | There are commands that return more than one byte of response. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 7c852e7df50e370b26b060c96c3cc4491cee88eb)
* mediatek: cast literal value to charSven Wegener2022-09-181-1/+1
| | | | | | | | | | | Or the comparison against a signed char is always true, because the literal 0xaa is treated as an unsigned int, to which the signed char is casted during comparison. 0xaa is above the positive values of a signed char and negative signed char values result in values larger than 0xaa when casted to unsigned int. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit e9a22ce2535c4a0faf83d5595304fe0e2c7bd1b2)
* mediatek: correctly log i2c responseSven Wegener2022-09-181-2/+2
| | | | | | | | The read response is in the i2c_response variable. Also use %hhx format, because we're dealing with a single char. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit c4f9f9b44c82ffeacd9d3c00ba07171c35831337)
* mediatek: remove gpiod_direction_output()Sven Wegener2022-09-181-2/+0
| | | | | | | It's already set to output with GPIOD_OUT_LOW. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit a188356484f434c72ea536d91d7f93f59c562eb5)
* mediatek: do not use gpiod_set_raw_value()Sven Wegener2022-09-181-2/+2
| | | | | | | The polarity of the signal is set in the device dts. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 56c2d15587dfe5285f1cf3bfb236c827bc446465)
* kernel: modules: package kmod-crypto-essivDaniel Golle2022-09-181-0/+12
| | | | | | | Package kernel module providing ESSIV support for block encryption. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 4133102898502c9bb453e8603b6c891aa103bce4)
* mediatek: fix typo in bpi-r64 image recipeDaniel Golle2022-09-181-1/+1
| | | | | | | | Janusz Dziedzic reported a typo introduced by a recent commit. Fix it. Fixes: 50c892d67b ("mediatek: bpi-r64: make initramfs/recovery optional") Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 007c8809c1e888748af70c1b878f4d0105fe7531)
* mediatek: bpi-r64: make initramfs/recovery optionalDaniel Golle2022-09-181-2/+7
| | | | | | | | | | Only include recovery image in SD card image generated for the BananaPi BPi-R64 if building with CONFIG_TARGET_ROOTFS_INITRAMFS This allows to build images larger than 32 MB (the limit for initramfs/recovery image) by deselecting initramfs. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 50c892d67bb4af90861be9fbb6831c2eeb62de11)
* ramips: fix GB-PC1 and GB-PC2 LEDsArınç ÜNAL2022-09-183-17/+15
| | | | | | | | | | | | | | | | Add the missing LEDs for GB-PC2. Some of these LEDs don't exist on the device schematics. Tests on a GB-PC2 by me and Petr proved otherwise. Remove ethblack-green and ethblue-green LEDs for GB-PC1. They are not wired to GPIO 3 or 4 and the wiring is currently unknown. Set ethyellow-orange to display link state and activity of the ethyellow interface for GB-PC2. Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf Tested-by: Petr Louda <petr.louda@outlook.cz> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> (cherry picked from commit 2a6ef7f53d7b96e4ee0200196c28ed6b0a7c8465)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 04:10:39 +0000