aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq40xx: 5.10: copy patchesRobert Marko2021-09-2544-0/+4683
| | | | | | Copy over the 5.4 kernel patches to 5.10 folder. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ramips: add support for I-O DATA WN-DX2033GRINAGAKI Hiroshi2021-09-253-1/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I-O DATA WN-DX2033GR is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : Raw NAND 128 MiB (Macronix MX30LF1G18AC-TI) - WLAN : 2.4/5 GHz - 2.4 GHz : 2T2R, MediaTek MT7603E - 5 GHz : 4T4R, MediaTek MT7615 - Ethernet : 5x 10/100/1000 Mbps - Switch : MediaTek MT7530 (SoC) - LEDs/Keys : 2x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J5: 3.3V, TX, RX, NC, GND from triangle mark - 57600n8 - Power : 12 VDC, 1 A Flash instruction using initramfs image: 1. Boot WN-DX2033GR normally 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt initramfs image and click update ("更新") button to perform firmware update 4. On the initramfs image, download the sysupgrade.bin image to the device and perform sysupgrade with it 5. Wait ~120 seconds to complete flashing Notes: - The hardware of WN-DX2033GR and WN-AX2033GR are almost the same, and it is certified under the same radio-wave related regulations in Japan - The last 0x80000 (512 KiB) in NAND flash is not used on stock firmware - stock firmware requires "customized uImage header" (called as "combo image") by MSTC (MitraStar Technology Corp.), but U-Boot doesn't - uImage magic ( 0x0 - 0x3 ) : 0x434F4D42 ("COMB") - header crc32 ( 0x4 - 0x7 ) : with "data length" and "data crc32" - image name (0x20 - 0x37) : model ID and firmware versions - data length (0x38 - 0x3b) : kernel + rootfs - data crc32 (0x3c - 0x3f) : kernel + rootfs - There are 2x important flags in the flash: - bootnum : select os partition for booting (persist, 0x4) - 0x01: firmware - 0x02: firmware_2 - debugflag : allow interrupt kernel loader, it's named as "Z-LOADER" (Factory, 0xFE75) - 0x00: disable debug - 0x01: enable debug MAC addresses: LAN : 50:41:B9:xx:xx:90 (Factory, 0xE000 (hex) / Ubootenv, ethaddr (text)) WAN : 50:41:B9:xx:xx:92 (Factory, 0xE006 (hex)) 2.4 GHz : 50:41:B9:xx:xx:90 (Factory, 0x4 (hex)) 5 GHz : 50:41:B9:xx:xx:91 (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: fix RTL8231 gpio expander for high GPIOsPaul Fertser2021-09-251-5/+8
| | | | | | | | GPIOs > 31 require special handling. This patch fixes both the initialisation and direction get/set operations. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Sander Vanheule <sander@svanheule.net>
* kernel: add patch to fix an issue with kernel headers that broke perfFelix Fietkau2021-09-251-0/+11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/fakeroot: fix build error on macOSFelix Fietkau2021-09-251-0/+11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport support for BSS color changesFelix Fietkau2021-09-253-16/+1025
| | | | | | This is needed for an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add missing information to dlink headersAlan Luck2021-09-245-8/+179
| | | | | | | | | | | | Add additional header information required for newer bootloaders found on DIR-2660-A1 & A2. Also remove the MTD splitter compatible from the second firmware partition, as OpenWrt only supports handling of the first one. Signed-off-by: Alan Luck <luckyhome2008@gmail.com> [rephrase commit message, remove removal of read-only flags] Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: fix segfault when deinit mesh ifacesJesus Fernandez Manzano2021-09-241-0/+5
| | | | | | | | | | | In hostapd_ubus_add_bss(), ubus objects are not registered for mesh interfaces. This provokes a segfault when accessing the ubus object in mesh deinit. This commit adds the same condition to hostapd_ubus_free_bss() for discarding those mesh interfaces. Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
* rockchip: fix broken squashfs sysupgradeDavid Bauer2021-09-241-1/+1
| | | | | | | | | | | | | | The rockchip platform supports squashfs SD card images. However, the resulting image is not padded to completely fill the rootfs partition. Because of that, the f2fs overlay might not be erased, resulting in uci-defaults not bing executed or the configuration not being erased, even though drop config was selected. Modify the image generation process so the image is padded to cover the entire root filesystem partition. Signed-off-by: David Bauer <mail@david-bauer.net>
* scripts: package-metadata add pkgmanifestjson callPaul Spooren2021-09-231-0/+36
| | | | | | | | | | The new `pkgmanifestjson` call prints all package manifest of a feed in JSON format. This function can be used to print an overview of packages information used for downstream tooling. The script is entirely based on Petrs work on dependency visualisation. Signed-off-by: Paul Spooren <mail@aparcar.org>
* bcm47xx: use device vendor/model variableMoritz Warning2021-09-232-4/+8
| | | | | | | | Remove use of DEVICE_TITLE in favor of the DEVICE_VENDOR and DEVICE_MODEL as used by all other targets. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* x86: use device vendor/model variableMoritz Warning2021-09-234-5/+10
| | | | | | | | Remove use of DEVICE_TITLE in favor of the DEVICE_VENDOR and DEVICE_MODEL as used by all other targets. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* base-files: reduce number of `mkdir` callsPaul Spooren2021-09-231-17/+19
| | | | | | | | | | | | | The `mkdir` commands supports passing multiple arguments to batch create multiple folders, instead of calling the tool every single time. If the creation of one of the folders fails, all other folder are still created and therefore doesn't change the error handling. Also stop creating `/etc/` explicitly after subfolders of `/etc/` were already created. Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: reduce `sed` callsPaul Spooren2021-09-231-4/+2
| | | | | | | | | The `sed`-script shouldn't be called multiple times, especially not with the same files. This commit merges all files together in a single `sed`-script call. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts: store maintainer in package metadataPaul Spooren2021-09-231-0/+1
| | | | | | | The maintainer could be usable for downstream tooling, so start storing it in the metadata. Signed-off-by: Paul Spooren <mail@aparcar.org>
* imagebuilder: show architecture in `make info` outputPaul Spooren2021-09-231-0/+1
| | | | | | | Using `make info` show the current target, revision, default packages and available profiles. This commits adds the used architecture. Signed-off-by: Paul Spooren <mail@aparcar.org>
* restool: add back PKG_VERSIONRosen Penev2021-09-231-1/+2
| | | | | | | | | | | | | For some reason, the build system chops off the last number from the version, which is not correct. Add it back. Update hash. Fixes: 96c7164acd80 ("restool: update to LSDK-20.12") Signed-off-by: Rosen Penev <rosenp@gmail.com> [add Fixes] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq-wifi: Work around Plasma Cloud PA1200 5GHz crashSven Eckelmann2021-09-231-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was noticed [1] that the ath10k firmware crashes on 5GHz since OpenWrt 21.02.0. The problem seems to be triggered by the the nonLinearTxFir field in the 5GHz BDF. If baseEepHeader.nonLinearTxFir (offset 0xc2) is 1 then the firmware just crashes when setting up the 5Ghz radio using `ifconfig wlan1 up`: ath10k_ahb a800000.wifi: firmware crashed! (guid 9e36ee82-4d2c-4c63-b20b-609a1eaca30c) ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000 ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 ath10k_ahb a800000.wifi: firmware ver 10.4-3.6-00140 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 ba79b746 ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 5f400efc ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1 ath10k_ahb a800000.wifi: firmware register dump: ath10k_ahb a800000.wifi: [00]: 0x0000000B 0x000015B3 0x009C3C27 0x00975B31 ath10k_ahb a800000.wifi: [04]: 0x009C3C27 0x00060530 0x00000018 0x004176B8 ath10k_ahb a800000.wifi: [08]: 0x00405A50 0x00412A30 0x00000000 0x00000000 ath10k_ahb a800000.wifi: [12]: 0x00000009 0x00000000 0x009B9742 0x009B974F ath10k_ahb a800000.wifi: [16]: 0x00971238 0x009B9742 0x00000000 0x00000000 ath10k_ahb a800000.wifi: [20]: 0x409C3C27 0x004053DC 0x00000D2C 0x00405A60 ath10k_ahb a800000.wifi: [24]: 0x809C3E13 0x0040543C 0x00000000 0xC09C3C27 ath10k_ahb a800000.wifi: [28]: 0x809B9AC5 0x0040547C 0x00412A30 0x0040549C ath10k_ahb a800000.wifi: [32]: 0x809B8ECD 0x0040549C 0x00000001 0x00412A30 ath10k_ahb a800000.wifi: [36]: 0x809B8FF3 0x004054CC 0x00412838 0x00000014 ath10k_ahb a800000.wifi: [40]: 0x809BEF98 0x0040551C 0x0041627C 0x00000002 ath10k_ahb a800000.wifi: [44]: 0x80986D47 0x0040553C 0x0041627C 0x00416A88 ath10k_ahb a800000.wifi: [48]: 0x809CBB0A 0x0040559C 0x0041ACC0 0x00000000 ath10k_ahb a800000.wifi: [52]: 0x809864EE 0x0040560C 0x0041ACC0 0x00000001 ath10k_ahb a800000.wifi: [56]: 0x809CA8A4 0x0040564C 0x0041ACC0 0x00000001 ath10k_ahb a800000.wifi: Copy Engine register dump: ath10k_ahb a800000.wifi: [00]: 0x0004a000 14 14 3 3 ath10k_ahb a800000.wifi: [01]: 0x0004a400 16 16 22 23 ath10k_ahb a800000.wifi: [02]: 0x0004a800 3 3 2 3 ath10k_ahb a800000.wifi: [03]: 0x0004ac00 15 15 15 15 ath10k_ahb a800000.wifi: [04]: 0x0004b000 4 4 44 4 ath10k_ahb a800000.wifi: [05]: 0x0004b400 3 3 2 3 ath10k_ahb a800000.wifi: [06]: 0x0004b800 1 1 1 1 ath10k_ahb a800000.wifi: [07]: 0x0004bc00 1 1 1 1 ath10k_ahb a800000.wifi: [08]: 0x0004c000 0 0 127 0 ath10k_ahb a800000.wifi: [09]: 0x0004c400 0 0 0 0 ath10k_ahb a800000.wifi: [10]: 0x0004c800 0 0 0 0 ath10k_ahb a800000.wifi: [11]: 0x0004cc00 0 0 0 0 ath10k_ahb a800000.wifi: failed to update channel list: -108 ath10k_ahb a800000.wifi: failed to set pdev regdomain: -108 ath10k_ahb a800000.wifi: failed to create WMI vdev 0: -108 ieee80211 phy1: Hardware restart was requested Since no actual solution is known (besides downgrading the ath10k firmware) it seems to be better to disable the nonLinearTxFir for now. [1] https://lore.kernel.org/ath10k/3423718.UToCqzeSYe@ripper/ Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ipq-wifi: Update Plasma Cloud PA1200 BDFs to firmware 3.5.12Sven Eckelmann2021-09-231-0/+0
| | | | | | | | The official Plasma Cloud firmware adjusted the BDFs to contain new conformance test limits and target power values. These should be imported to avoid emissions outside the allowed limits. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* bcm53xx: MR32: read mac-address from eepromChristian Lamparter2021-09-232-4/+46
| | | | | | | | Meraki wrote the ethernet MAC-address of the device onto the eeprom (AT24C64) at the fixed location 0x66 to 0x6C. Let's fetch it from there. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* scripts: mkits.sh: Allow legacy @ mode for dts creationDamien Mascord2021-09-233-13/+19
| | | | | | | | | | | | | | | | | | commit 5ec60cbe9d94 ("scripts: mkits.sh: replace @ with - in nodes") broke support for Meraki MR32 and this patch makes the replacement configurable allowing for specifying the @ or - or whatever character that is desired to retain backwards compatibility with existing devices. For example, this patch includes the fix for the Meraki MR32 in target/linux/bcm53xx/image for meraki_mr32: DEVICE_DTS_DELIMITER := @ DEVICE_DTS_CONFIG := config@1 Fixes: 5ec60cbe9d94 ("scripts: mkits.sh: replace @ with - in nodes") Signed-off-by: Damien Mascord <tusker@tusker.org> [Added tags, checkpatch.pl fixes, noted that this is for old stuff] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* libtool: Revert "libtool: bump to 2.4.6"Hauke Mehrtens2021-09-2310-444/+334
| | | | | | | | | | This breaks the package builds using the SDK. The targets all build fine, but the package builder fails on many packages. The package builder uses the OpenWrt SDK. This reverts commit c377d874bededfad971530aeb7d7e1b43cd3e61a. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* scripts: handle gcc and linux in dl_cleanup scriptAnsuel Smith2021-09-221-2/+2
| | | | | | | | | | | Handle gcc and linux with a special regex that set their progname with their major version. This way every minor version can be cleared. The build cleanup logic can be tweaked later to clean the entire toolchain and target dir with a different gcc version. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [reformat commit message] Signed-off-by: Paul Spooren <mail@aparcar.org>
* bcm53xx: backport early DT patches queued for 5.16Rafał Miłecki2021-09-2312-4/+642
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* scripts: format dl_cleanup to black format python styleAnsuel Smith2021-09-221-199/+230
| | | | | | Forma dl_cleanup python script to black style. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* scripts: add missing regex for dl_cleanup scriptAnsuel Smith2021-09-221-0/+8
| | | | | | | | | | | | | | | Regex xxx-YYYY-MM-DD-GIT_SHASUM was missing. Add the new regex to improve and better find outdated package. This also fix a bug where some bug were incorrectly detected as packagename-yyyy-mm-dd instead of packagename due to them be parsed by the wrong parser Example: openwrt-keyring-2021-02-20-49283916.tar.xz Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [added example in commit message] Signed-off-by: Paul Spooren <mail@aparcar.org>
* toolchain/binutils: switch to version 2.37 by defaultPaul Spooren2021-09-222-2/+2
| | | | | | | | | | | | | | | | | | | Compile tests: * all Runtime tests: * ipq806x/generic * lantiq/mt7621 * lantiq/xrx200 * x86/64 Signed-off-by: Paul Spooren <mail@aparcar.org> Tested-by: Paul Spooren <mail@aparcar.org> Tested-by: Rosen Penev <rosenp@gmail.com> Tested-by: Andre Heider <a.heider@gmail.com> Tested-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* fstools: ensure filesystems are mounted before log service startsTimo Sigurdsson2021-09-221-2/+4
| | | | | | | | | | | | Currently, the fstab service starts after the log service which breaks the ability to write a persistent log file to a filesystem mounted by the fstab service. Thus, change the start order of the fstab service so it starts right before the log service. Fixes: b131853 ("ubox: update to latest git revision") Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> [set to 11 to be explicitly before log, not only alphabetically, SPDX] Signed-off-by: Paul Spooren <mail@aparcar.org>
* mac80211: Update to backports-5.10.68Hauke Mehrtens2021-09-2252-259/+131
| | | | | | | | | | | | | | | | | | Refresh all patches. The removed patches were integrated upstream. This contains fixes for CVE-2020-3702 1. These patches (ath, ath9k, mac80211) were included in kernel versions since 4.14.245 and 4.19.205. They fix security vulnerability CVE-2020-3702 [1] similar to KrØØk, which was found by ESET [2]. Thank you Josef Schlehofer for reporting this problem. [1] https://nvd.nist.gov/vuln/detail/CVE-2020-3702 [2] https://www.welivesecurity.com/2020/08/06/beyond-kr00k-even-more-wifi-chips-vulnerable-eavesdropping/ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/musl: Remove extra format attribute patchHauke Mehrtens2021-09-221-197/+0
| | | | | | | This patch never went upstream so remove it. GCC should already add such a check to the common functions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bpftools: fix compilation with musl 1.2.xRosen Penev2021-09-221-0/+20
| | | | | | | | A definition for __maybe_inline is needed. Refreshed patches. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain/musl: remove several GNU headersRosen Penev2021-09-226-554/+0
| | | | | | | | | | | | | | | | Remove GLOB_ONLYDIR patch. Only fstools relies on it. fstools has been fixed separately. Remove woresize.h file. It seems to be for an old version of GCC. Remove features.h and glibc-types files. Same as above. Remove sys/cdefs.h. This is a deprecated header. Patches to fix packages that use it have already been patched. Tested with all packages in the base tree. They all compile. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain/musl: update to 1.2.2Rosen Penev2021-09-2212-316/+26
| | | | | | | | | | | This release introduces 64-bit time_t, which is needed to avoid the year 2038 problem. Remove upstream patches. Refreshed others. Rebased features.h file based on latest musl. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain/gcc: switch to version 11 by defaultPaul Spooren2021-09-212-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | gcc10 seem to increase build size and gcc11 seem to fix that. Compile tests: * all Runtime tests: * ath79 * mpx85xx/p2020 * mvebu * x86/64 Special thanks to Rosen for fixing layerscape & bcm63xx Signed-off-by: Paul Spooren <mail@aparcar.org> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com Acked-by: Rosen Penev <rosenp@gmail.com> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> Tested-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* tfp-layerscape: update to LSDK-20.12Rosen Penev2021-09-213-10/+23
| | | | | | | | | | Fixes compilation with GCC11. Kept PKG_VERSION as there's some bug that chops off the 12 at the end. Refreshed other patch. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* restool: update to LSDK-20.12Rosen Penev2021-09-213-369/+2
| | | | | | | | | | | | Fixes compilation with both GCC 10 and 11. Switched to AUTORELEASE for simplicity. Removed PKG_VERSION as it's derived from PKG_SOURCE_VERSION. Removed all patches as they are upstream backports. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* bcm63xx: remove memcpy from mac assignmentRosen Penev2021-09-212-6/+16
| | | | | | | | | With GCC11, memcpy doesn't work here as it assumes a size of 0. Use ioremap to avoid it. Fixed parameter type to match board_get_mac_address. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain/gcc: cleanup gcc9 config optionPaul Spooren2021-09-211-3/+0
| | | | | | | This line should have been removed in 244847da "build: remove GCC9 support" but stayed in tree after an incomplete rebase. Fix it. Signed-off-by: Paul Spooren <mail@aparcar.org>
* 6rd: delete tunnel on interface teardownDavid Lam2021-09-222-1/+3
| | | | | | | | | | | | Delete tunnel on 6rd interface teardown. Should solve problem related to tunnel stuck on restart loop with "Unknown Command" on tunnel restart due to wan connection drop. This patch is similar to the one written by Ansuel on Aug 2, 2021 but the 6rd teardown produces the same symptoms when the network service is restarted. Signed-off-by: David Lam <david@thedavid.net>
* restool: fix compilation with GCC 10Kuan-Yi Li2021-09-213-10/+269
| | | | | | | | | GCC 10 defaults to `-fno-common` and complains about multiple definition of `mc_status` in restool. Backport a patch from upstream to fix compilation with host GCC 10. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
* hostapd: let netifd set bridge port attributes for snoopingFelix Fietkau2021-09-211-1/+30
| | | | | | Avoids race conditions on bridge member add/remove Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ustp: update to the latest versionFelix Fietkau2021-09-211-3/+3
| | | | | | | | c62d85cf7a0d bridge: check port bpdu filter status and apply it to the config 25555611be91 libnetlink: turn rtnetlink error answers into debug msgs 462b3a491347 build: use pthread cflags/ldflags Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2021-09-211-3/+3
| | | | | | | | | | | | d590fbd255ce wireless: always enable bpdu filter for AP interfaces and VLANs f8ff6d820283 system-linux: remove copy&paste from /proc and /sys path names 300b1220fab3 wireless: improve reliability of proxyarp support 5ba9744aac6d device: add support for configuring bonding devices 6fa9b042ff4d wireless: only apply wireless device attributes to the base vif interface 06d11bbf1f2b wireless: only enable proxyarp/isolate for AP vifs 08e954e137ff bonding: claim the port device before creating the bonding device Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add a bridge feature for filtering BPDU packets on portsFelix Fietkau2021-09-212-0/+354
| | | | | | This will be used to ensure that APs don't transmit unnecessary STP packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* arm-trusted-firmware-mvebu: Add hash for aarch64 cm3-gccHauke Mehrtens2021-09-201-0/+4
| | | | | | | | This adds the hash also for the aarch64 toolchain in addition to the x86_64 toolchain. This gets the build on a Linux aarch64 host one step further. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libtool: bump to 2.4.6Eneas U de Queiroz2021-09-2010-334/+444
| | | | | | | | | | | | | | | | This updates libtool to its current release, from 2015. Current patches were renumbered and given a description text. The fix in 160-passthrough-ssp.patch is no longer needed. A patch to speed up build was cherry-picked, and another openwrt specific patch was needed to not use quotes in $(SHELL), to acommodate our "SHELL=/usr/bin/env bash" usage. The already present call to ./bootstrap ensures that generated files are refreshed, so the patches are applied only to their sources. Also, that bootstrap call was adjusted to run at the appropriate time when QUILT=1. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* tools/e2fsprogs: update to 1.46.4Rosen Penev2021-09-204-5/+5
| | | | | | Refresh patches. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/autoconf-archive: update to 2021.02.19Rosen Penev2021-09-201-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/sstrip: update to 3.2Rosen Penev2021-09-201-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/sparse: update to 0.6.4Rosen Penev2021-09-201-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 15:30:37 +0000