aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mpc85xx: Enable initramfs for p1020 subtargetChris Blake2017-10-142-1/+2
| | | | | | | The following patch enables building of initramfs images by default for the P1020 subtarget in mpc85xx. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* at91: Add ext4 filesystemSandeep Sheriker Mallikarjun2017-10-141-1/+1
| | | | | | | Add ext4 filesystem for creating sdcard image with ext4 rootfs and removing ext2 as it superset of ext4. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91: Enable SDHCI for sama5 in default configSandeep Sheriker Mallikarjun2017-10-141-0/+4
| | | | | | | Enabled SDHCI for sama5 in kernel default config and this is needed to mount sdcard rootfs partition during boot. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91bootstrap: remove manual copy of binaries to BIN_DIRSandeep Sheriker Mallikarjun2017-10-141-2/+10
| | | | | | | removed copying of binaries to BIN_DIR during install and using default/install to install binaries to BIN_DIR folder. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91bootstrap: Add BUILD_SUBTARGET variableSandeep Sheriker Mallikarjun2017-10-141-2/+3
| | | | | | | | | Added sama5 to BUILD_SUBTARGET variable.This will populate at91bootstrap menu options in bootloader menu only when SAMA5 devices are selected as SUBTARGET and to avoid showing up this menu when legacy device is selected as SUBTARGET and fixed typo mistake: sama5d3 -> sama5d2. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* at91: refresh kernel configurationHauke Mehrtens2017-10-143-48/+35
| | | | | | | This was done by running "make kernel_oldconfig" and "make kernel_oldconfig CONFIG_TARGET=subtarget" Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-at91: multiple build fixesHauke Mehrtens2017-10-141-21/+23
| | | | | | | | | | | This fixes the following problems: * Add BUILD_DEVICES for legacy subtarget * Use features from u-boot.mk for sama5 subtarget This is mainly done by changing the prefix from uboot to U-Boot. This makes them depend on the sama5 subtarget and not selectable for the legacy subtarget any more Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.4 to 4.4.92Kevin Darbyshire-Bryant2017-10-141-2/+2
| | | | | | | | | No patch refresh changes required. Compile tested for: ar71xx Archer C7 v2 Run tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* iproute2: bump to 4.13Hans Dedecker2017-10-1311-38/+51
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: fix tx power regressionFelix Fietkau2017-10-131-1/+1
| | | | | | | Revert an accidental change that was introduced by having an old version of the patch in my git tree, which was merged in 609208597b6d Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: add listen_address parameterChristian Lamparter2017-10-132-1/+6
| | | | | | | | | | | | | | | | | | | | | | | This patch adds a parser for the uci representation of dnsmasq's "-a | --listen-address" option. In summary, this option forces dnsmasq to listen on the given IP address(es). Both interface and listen-address options may be given, in which case the set of both interfaces and addresses is used. Note that if no interface option is given, but listen_address is, dnsmasq will not automatically listen on the loopback interface. To achieve this, the loopback IP addresses, 127.0.0.1 and/or ::1 must be explicitly added. This option is useful for ujailed dnsmasq instances, that would otherwise fail to work properly, because listening to the "This host on this network" address (aka 0.0.0.0 see rfc1700 page 4) may not be allowed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (PKG_RELEASE increase)
* kernel: add fix for bgmac with B50212E B1 PHYRafał Miłecki2017-10-138-6/+204
| | | | | | | This PHY requires some extra programming to work reliably with all devices. Backport upstream fix for it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mt76: update to the latest versionFelix Fietkau2017-10-132-89/+3
| | | | | | | e781569 update to latest mac80211/cfg80211 API changes 37654d7 mt76x2: fix tx status ampdu length corner case Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to wireless-testing 2017-10-06Felix Fietkau2017-10-1316-202/+351
| | | | | | | Rework the code to get rid of some extra kernel module dependencies introduced in the last update. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: activate user space firmware loading againHauke Mehrtens2017-10-124-10/+46
| | | | | | | | | This backports a patch from kernel 4.14 to the ath10k-ct version based on kernel 4.13. Some devices are using a user space script to load the calibration data from the flash and this was not trigged any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct driver: use dma_alloc_coherent, 4.13 based driverBen Greear2017-10-121-6/+11
| | | | | | | | | | This should help ath10k work on systems with little or no IOMMU memory. apu2 can boot two 9888 NICs now, for instance. From upstream patch by Adrian Chadd. And, start building the 4.13 based CT ath10k driver. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct firmware: Tx-hang and EAPOL handling fixes for wave-2 firmware.Ben Greear2017-10-121-10/+10
| | | | | | | | | | | | | | | | | | Changes since last LEDE release include: * Fix key-setting bug that broke sending the EAPOL 2/4 in some cases. This was a bug I introduced some time back while trying to fix .11r and simplify the key handling logic. (Patch to wpa_supplicant fixed the race with sending the 4/4 and setting the key...un-patched supplicant will still have this race and the 4-way auth will not work as reliably.) * Increase amount of active-tids that can be scheduled. This fixes a tx-stall seen with many station vdevs. * Fix bug in upstream code that would cause the maximum peer to never be scheduled for tx. Signed-off-by: Ben Greear <greearb@candelatech.com>
* layerscape: only support 64-bit for ls1088ardb/ls2088ardbYangbo Lu2017-10-121-0/+2
| | | | | | | | This is no requirement and plan to support 32-bit for ls1088ardb and ls2088ardb. Current 32-bit firmware for them couldn't work, so only keep 64-bit support for these two boards in menuconfig. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: fix compile issue for usb ehci-fsl driverYangbo Lu2017-10-121-0/+28
| | | | | | | | | | When build firmware for layerscape target with CONFIG_ALL_NONSHARED=y, there would be a compile issue of usb ehci-fsl driver. Actually this driver was for PPC platforms initially and was not ready for non-PPC now, but a kernel kconfig patch removed PPC dependency for it. So that kernel patch should be reverted. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* ar71xx: fix section mismatchesHauke Mehrtens2017-10-1110-13/+13
| | | | | | Fix some section mismatches found with kernel 4.9. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: Add kernel 4.9 supportHauke Mehrtens2017-10-11106-73/+8329
| | | | | | | | | | | | | This add support for kernel 4.9 to the ar71xx target. It was compile tested with the generic, NAND and mikrotik subtarget. Multiple members of the community tested it on their boards and did not report any major problem so far. Especially the NAND part received some changes to adapt to the new kernel APIs. The serial driver hack used for the Arduino Yun was not ported because the kernel changed there a lot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm47xx: relocate the stack in loaderHauke Mehrtens2017-10-112-2/+4
| | | | | | | | | | | By default we are reusing the stack provided by CFE, like it is intended by CFE. On my WRT54GS it is located at 0x8043BF30, so a big kernel image could overwrite it. Relocate it to a different memory region which is still under the 8MB RAM, but in the higher area. We only need this memory region for the stack of the loader, Linux will set up this for its own. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm47xx: relocate loader to higher addressHauke Mehrtens2017-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | The boot process on a WRT54GL works the following way: 1. CFE gets loaded by the boot rom from flash 2. CFE loads the loader from the flash and gzip uncompresses it 3. CFE starts the loader 4. The loader stores the FW arguments and relocates itself to BZ_TEXT_START (now 0x80600000) 5. The loader reads the Linux image from flash 6. The loader lzma decompresses the Linux image to LOADADDR (0x80001000) 7. The loader executes the uncompress Linux image at LOADADDR The BZ_TEXT_START was set to 0x80400000 before. When the kernel gets uncompressed and is bigger than BZ_TEXT_START - LOADADDR it overwrote the loader which was currently uncompressing it and made the board crash. Increase the BZ_TEXT_START my 2 MB to have more space for the kernel. Even on 16MB RAM devices the memory goes till 0x80FFFFFF so this should not be a problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm53xx: backport DTS changes up to the first 4.15 queued commitsRafał Miłecki2017-10-1016-0/+1324
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips/mt76x8: add initramfs support for tplink 841n v13Alexander Couzens2017-10-091-0/+1
| | | | | | | | | | | | | The tplink 841n v13 requires an tplink v2 image header in front of an initramfs image. To boot an initramfs image: - break the uboot by holding the '4' key - setup your tftp server 192.168.0.255 - tftp 81000000 lede-ramips-mt76x8-tl-wr841n-v13-initramfs-kernel.bin - bootm Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* image-commands: tplink-v2-header: pass kernel loadaddr and entryAlexander Couzens2017-10-091-1/+2
| | | | | | | Initramfs images won't boot if the default loadaddr and entrypont is different. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* net: uqmi: fix blocking in endless loops when unplugging deviceAlexandru Ardelean2017-10-091-0/+2
| | | | | | | | | | | If you unplug a QMI device, the /dev/cdc-wdmX device disappears but uqmi will continue to poll it endlessly. Then, when you plug it back, you have 2 uqmi processes, and that's bad, because 2 processes talking QMI to the same device [and the same time] doesn't seem to work well. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* conntrack-tools: switch to gitStijn Tintel2017-10-091-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There have been a number of interesting fixes in conntrack-tools since the current latest release. Most notable is that this fixes IPv6 conntrack table syncing when cross-compiling conntrack-tools. 7e7748d src/main: refresh help message fe32043 conntrackd.8: refresh file 47a4dda conntrackd.8: add reference to systemd 0cfe7ff doc/manual: include some bits about init systems 74a418b conntrackd: cthelper: ftp: Set match offset/len for PORT mangling d833bed conntrackd: cthelper: ftp: Fix debug print dd4b5a1 conntrackd: cthelper: Add new mdns helper 498d698 Link nfct and helper modules with `-z lazy` 9e94e85 sync-mode: print errno message on failure ab81c35 log: print messages to stdout/sderr if running in console mode 631d92b log: introduce a mechanism to know if log was initialized ccb1c8b conntrackd: replace error reporting in the config parser with dlog() bee121e conntrackd: replace fprintf calls with dlog() 5a51b04 conntrack-tools: update Arturo Borrero Gonzalez email address abb9984 helper: remove copy and paste from uapi kernel header a91a004 src: add log message when resync is requested by other node c2d8be1 systemd: fix missing log.h include f6ca216 config: drop old/obsolete/deprecated conntrackd.conf config options 8b83771 conntrack: send mark filter to kernel iff set 1ba5e76 conntrackd: cthelper: Don't leak nat_tuple 832166d conntrackd: cthelper: Free pktb after use ff843bc conntrackd: config: Do not strdup() tokens b61c454 conntrackd: cthelper: ssdp: Track UPnP eventing 8ea394e conntrackd: Remove obsolete rule to catch ambiguous Checksum option 39398cd conntrackd: CommitTimeout breaks DisableExternalCache set On 29b390a conntrack: Support IPv6 NAT 381827a conntrackd: factorice tx_queue functions 131df89 conntrackd: factorize resync operations d31bacc conntrackd: consolidate more code to use resync_send() 3d98496 conntrackd: request resync at startup ef410bf conntrackd: remove use of HAVE_INET_PTON_IPV6 9d38445 conntrackd: evaluate configuration earlier 6feded7 conntrackd: cleanup if failed forking dbfdea7 conntrackd: deprecate unix backlog configuration 210f542 conntrackd: make the daemon run in RT mode by default 37cc7f0 conntrackd: remove warning for -S d2849d1 conntrack: Show multiple CPUs stats from proc bc0b49a conntrackd: cthelper: ssdp: fix build with musl 0c77a25 tests: don't fail on modprobe since the driver might be built-in eefe649 conntrack.8: refresh manpage Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* libnetfilter_conntrack: switch to gitStijn Tintel2017-10-091-6/+6
| | | | | | | | | | | | | | In order to build conntrack-tools from git, a newer version of libnetfilter_conntrack is required. As 1.0.6 is currently the latest release, switch to git. b0a7cf7 include: expose a copy of nf_conntrack_common.h f68f7b3 conntrack: fix missing break in setobjopt_undo_dnat() 79dac5a conntrack: revert getobjopt_is_nat() condition b266523 libnetfilter_conntrack: bump version to 1.0.7 e870432 labels: don't crash on NULL labelmap Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* libnetfilter_queue: bump to git HEADStijn Tintel2017-10-092-13/+11
| | | | | | | | | | | | | b39cac7 src: Correct typo in the location of internal.h in #include 58cb066 src: Declare the define visibility attribute together e84b559 Revert "src: Declare the define visibility attribute together" 003c2b1 examples: set dummy connmark value to show use of NFQA_CT nested attribute 63973da doc: extend the doxygen section about NFQA_CFG_F_GSO d7f74c7 build: bump version to 1.0.3 3f9eb57 build: bump library release version too 601abd1 doc: Add information about retrieving UID/GID/SECCTX fields Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mediatek: fix a sleep while atomic bug inside the ethernet driverJohn Crispin2017-10-091-0/+40
| | | | | | this sometimes happens when we have hw nat enabled. Signed-off-by: John Crispin <john@phrozen.org>
* treewide: switch git.netfilter.org to HTTPSStijn Tintel2017-10-085-5/+5
| | | | | | | As git.netfilter.org seems to support HTTPS, use that instead of HTTP which is insecure, or GIT which is blocked on many corporate networks. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ipset-dns: bump to git HEADStijn Tintel2017-10-082-60/+3
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: bump 4.9 to 4.9.54Stijn Tintel2017-10-0810-114/+14
| | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: - ramips/0067-enable-mt7621-xhci.patch - ramips/0085-pinmux-util.patch - ramips/301-fix-rt3883.patch Compile-tested on brcm2708/bcm2708, octeon, ramips/mt7621, x86/64. Runtime-tested on brcm2708/bcm2708, octeon, ramips/mt7621, x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: bump 4.4 to 4.4.91Kevin Darbyshire-Bryant2017-10-085-10/+10
| | | | | | | | | Refresh patches. Compile-tested for: ar71xx Archer C7 v2 Run-tested on: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* sunxi: build image for the NanoPi NEODaniel Golle2017-10-081-0/+9
| | | | | | | The NanoPi NEO is a small Allwinner H3 based board available with different DRAM configurations. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: kernel: add patches for NanoPi NEODaniel Golle2017-10-082-0/+108
| | | | | | | Enable dwmac-sun8i Ethernet core to use the built-in FastEthernet port. Enable exposed UART, USB and I2C pins. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-sunxi: build for NanoPi NEODaniel Golle2017-10-081-0/+7
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* layerscape: refresh patchesStijn Tintel2017-10-0829-3610/+2414
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: update and refresh patchesStijn Tintel2017-10-0814-88/+78
| | | | | | | | | | The lantiq patch 0028-NET-lantiq-various-etop-fixes.patch and sunxi patch 0051-stmmac-form-4-11.patch no longer applied after applying the the "generalize napi_complete_done()" patch. Update them so they apply, and refresh patches while at it. Fixes: 9aeb7ce8dc5 ("generic: net: generalize napi_complete_done") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* generic: net: generalize napi_complete_donePavel Kubelun2017-10-081-0/+1412
| | | | | | | | | Backport upstream commit that improves ethernet performance by a small amount. Compile and run tested on ipq8065. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* generic: net: tcp: backport tcp tx performance patchesPavel Kubelun2017-10-089-0/+712
| | | | | | | | | An overall throughput gain of 22 % for heavy TCP use over a single TX queue. Original patchset comment https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v4.13&id=3f4888adae7c1619b990d98a9b967536f71822b8 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* kernel: split 82574L patch into multiple filesStijn Tintel2017-10-086-327/+326
| | | | | | | | | | | | | | | | | | | | When refreshing patches that cointain multiple patches including headers in a single file, quilt will remove the headers from all but the first patch. This makes it difficult to review commits that refresh patches. Next to that, if only a few of the patch series are accepted in -stable, the patch needs to be manually modified. With each patch in a separate file, it's just a matter of git rm. Refresh patches while at it. Patchwork links: [1/5] https://patchwork.kernel.org/patch/9857487/ [2/5] https://patchwork.kernel.org/patch/9857489/ [3/5] https://patchwork.kernel.org/patch/9857495/ [4/5] https://patchwork.kernel.org/patch/9857491/ [5/5] https://patchwork.kernel.org/patch/9857493/ Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: Add some more generic config optionsHauke Mehrtens2017-10-083-10/+9
| | | | | | | | These options are deactivating some kernel modules for IP blocks not uses on this SoC. I saw the same when working with the ARM64 Marvell board so it is better to move them to generic. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* layerscape: remove wifi configHauke Mehrtens2017-10-082-32/+0
| | | | | | This is provided by the mac80211 package Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add missing config options for layerscape targetHauke Mehrtens2017-10-081-0/+5
| | | | | | This fixes some problems found by build bot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: Fix NULL pointer dereferece in at803x_link_change_notify()Andrey Jr. Melnikov2017-10-071-2/+2
| | | | | | | Check pdata pointer before use to avoid OOPS if dev_get_platdata() return NULL. Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com>
* layerscape: select sdk dts for ls1043ardb/ls1046ardbYangbo Lu2017-10-071-2/+2
| | | | | | | ls1043ardb/ls1046ardb should use sdk dts. This patch is to fix this. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: fix CPU_TYPE for armv8_32b targetsYangbo Lu2017-10-071-1/+2
| | | | | | | | | Layerscape uses Cortex-A53 or Cortex-A72 CPU. It's proper to set below CPU_TYPE for 32-bit mode. CPU_TYPE:=cortex-a15 CPU_SUBTYPE:=neon-vfpv4 Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add linux 4.9 supportYangbo Lu2017-10-0732-1/+251241
| | | | | | | This patch is to add linux 4.9 support for layerscape. All these kernel patches are from NXP LSDK 1709 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 20:41:26 +0000